tasc Posted August 1, 2019 Share Posted August 1, 2019 16 hours ago, glasgood said: Should work, no harm in trying it ! So I just converted over to the new iMacPro1,1 with the updated EFI files, but I'm booting to a black screen (I've got an RX560). Machine is working fine as I can remote desktop into it, just not sure how to get the display to work. I do have a second card (nvidia) in PCI slot 1 for windows (RX560 is in default slot 0). I've been using the Designare SSDT to disable the 2nd slot video card, not sure if that could be causing issues now. Let me know if anyone has ideas on how to get the display working again with the 560. Thanks! Link to comment Share on other sites More sharing options...
larabee Posted August 2, 2019 Share Posted August 2, 2019 3 hours ago, Cass67 said: 5 hours ago, larabee said: 860 Pro works just fine. Only Evo Plus has problem. Evo plus has been fine for me after the release of the updated Samsung firmware. I don't recommend using it because of the compatibility issue with older firmware. I don't have the chance to test with new firmware because I returned it immediately. I always recommend the Pro over the Evo line up when you have the $ because MLC vs TLC NAND. and... I know for the fact that @AudioGod is sitting on a pile of money as high as Eiffel tower. Link to comment Share on other sites More sharing options...
tasc Posted August 2, 2019 Share Posted August 2, 2019 55 minutes ago, tasc said: So I just converted over to the new iMacPro1,1 with the updated EFI files, but I'm booting to a black screen (I've got an RX560). Machine is working fine as I can remote desktop into it, just not sure how to get the display to work. I do have a second card (nvidia) in PCI slot 1 for windows (RX560 is in default slot 0). I've been using the Designare SSDT to disable the 2nd slot video card, not sure if that could be causing issues now. Let me know if anyone has ideas on how to get the display working again with the 560. Thanks! I'm back up and running based on some comments from @soniferous_fox - I removed the RX580 SSDT and used clover's injectATI. When I tried specifying the Orinoco framebuffer, still got black screen, but when I remove framebuffer and let clover figure it out, my display output works again. I also got the weird headphones output with the new audio layout ID, so reverted that back to what it was before. Now to benchmark! Link to comment Share on other sites More sharing options...
gino8080 Posted August 2, 2019 Share Posted August 2, 2019 Hello thank your guide, I'm using your EFI folder for vega56 but i'm stuck at this screen Forcing CS_RUNTIME.. mobo firmware F8 Booting from usb2 port With the GPU attached by hdmi please help! What Can I do? Link to comment Share on other sites More sharing options...
hackinbot Posted August 2, 2019 Share Posted August 2, 2019 (edited) 34 minutes ago, gino8080 said: Hello thank your guide, I'm using your EFI folder for vega56 but i'm stuck at this screen Forcing CS_RUNTIME.. ... mobo firmware F8 Booting from usb2 port With the GPU attached by hdmi please help! What Can I do? Most of us are on F10. You might want to try that first and follow the bios settings in the first post. Edited August 2, 2019 by hackinbot 1 Link to comment Share on other sites More sharing options...
hackinbot Posted August 2, 2019 Share Posted August 2, 2019 1 hour ago, tasc said: I'm back up and running based on some comments from @soniferous_fox - I removed the RX580 SSDT and used clover's injectATI. When I tried specifying the Orinoco framebuffer, still got black screen, but when I remove framebuffer and let clover figure it out, my display output works again. I also got the weird headphones output with the new audio layout ID, so reverted that back to what it was before. Now to benchmark! Weird that some people are getting a headphone output with audio layout id 16. This is what I see: although I think layout id 1 also showed similar outputs. Use what works... Link to comment Share on other sites More sharing options...
larabee Posted August 2, 2019 Share Posted August 2, 2019 17 minutes ago, hackinbot said: Weird that some people are getting a headphone output with audio layout id 16. This is what I see: although I think layout id 1 also showed similar outputs. Use what works... With layout 16, the entire thing is messed up for me, so I stick with Layout 1. 1 hour ago, gino8080 said: Hello thank your guide, I'm using your EFI folder for vega56 but i'm stuck at this screen Forcing CS_RUNTIME.. mobo firmware F8 Booting from usb2 port With the GPU attached by hdmi please help! What Can I do? Please at least update for BIOS F9, pay attention to Serial Port, it must be disabled. I had the same error before when I forgot to disable my Serial Port. Link to comment Share on other sites More sharing options...
glasgood Posted August 2, 2019 Author Share Posted August 2, 2019 (edited) 4 hours ago, soniferous_fox said: I have been looking in to this a bit more, and looking in IOReg, all 5 ports are showing, but shows NONE on the type of the 3rd port, so clearly my Graphics card doesn't't like the Orinoco Frame buffer for some reason. By the way, I was able to get the Orinoco frame buffer as well by just using the Graphics section in Clover, without the SSDT - in fact when I did that, whilst the 3rd screen didn't work, I actually got an even better score on Geekbench doing it that way (ticking InjectATI, adding the FB Name and the number of video ports). I may actually try some different FB names and see if they work. @soniferous_fox I did initially try specifying Orinoco, number of video ports and inject ATI and it did not work, but at that time I also had Acpi fixDisplay enabled. I just retried and framebuffer working via Clover Graphics section. 1 hour ago, hackinbot said: Weird that some people are getting a headphone output with audio layout id 16. This is what I see: although I think layout id 1 also showed similar outputs. Use what works... Indeed, it's strange. what version of AppleALC are you using ? I'm using AppleALC 1.3.9 Edited August 2, 2019 by glasgood Link to comment Share on other sites More sharing options...
tasc Posted August 2, 2019 Share Posted August 2, 2019 57 minutes ago, glasgood said: I did initially try specifying Orinoco, number of video ports and inject ATI and it did not work, but at that time I also had Acpi fixDisplay enabled. I just retried and framebuffer working via Clover Graphics section. So while the display is working now on bootup with the clover inject ATI (and no specific framebuffer defined) - I just found out it won't wake from sleep anymore. I've confirmed Acpi FixDisplay is unchecked and I'm running the latest EFI folder (without SSDT-RX-580.aml). Getting close... Link to comment Share on other sites More sharing options...
tasc Posted August 2, 2019 Share Posted August 2, 2019 So here's where I'm at so far with regards to getting the RX560 working on the new iMacPro1,1 platform. This was all done with the SSDT-RX-580.aml patch removed. The display will NOT initialize on bootup with the orinoco frame buffer and ATI inject (or with the RX-580.aml patch) The display works on bootup with the acre frame buffer and ATI inject The display works on bootup with no frame buffer specified and ATI inject The display works on bootup with no ATI inject at all (?) When waking from sleep, the monitor comes out of power save mode, but is blank On the previous iMac19,1 setup, I was using a designare SSDT patch to disable the GPU in PCI slot 2. This doesn't appear to work anymore on this new iMacPro1,1 setup, as I can see the nvidia card PCI information in system info. Not sure if that could be contributing to the wake issues. Link to comment Share on other sites More sharing options...
glasgood Posted August 2, 2019 Author Share Posted August 2, 2019 20 minutes ago, tasc said: When waking from sleep, the monitor comes out of power save mode, but is blank Make sure that FixDisplay is not enabled Link to comment Share on other sites More sharing options...
ja99004 Posted August 2, 2019 Share Posted August 2, 2019 12 hours ago, glasgood said: Use this ==> SSDT Ok thanks I’ll try it! Link to comment Share on other sites More sharing options...
AudioGod Posted August 2, 2019 Share Posted August 2, 2019 (edited) 11 hours ago, larabee said: I know for the fact that @AudioGod is sitting on a pile of money as high as Eiffel tower. @larabee I wish my brother...hahahahaha Don't judge a man by hes build....lol I might live in a castle and drive a Ferrari but that don't equal the hight of the Eiffel Tower...lololol (joke)....I drive a Bugatti really hahahahaha Edited August 2, 2019 by AudioGod Link to comment Share on other sites More sharing options...
hackinbot Posted August 2, 2019 Share Posted August 2, 2019 (edited) 7 hours ago, glasgood said: Indeed, it's strange. what version of AppleALC are you using ? I'm using AppleALC 1.3.9 Ok, I figured it out. I'm using 1.3.9 also. Layout ID 16, for Gigabyte Z390 ALC1220 according to AppleALC, uses the F_AUDIO header for Internal Speaker and back panel Line Out for Headphone switching. Layout ID 1 uses the F_AUDIO header for Headphone switching (more appropriate since it's connected to your case) and back panel Line Out for Internal Speaker. Stick with Layout ID 1. I'm guessing whoever created the definition for Layout ID 16 wasn't using our Aorus Pro motherboard. Edited August 2, 2019 by hackinbot headphone switching 2 Link to comment Share on other sites More sharing options...
tasc Posted August 2, 2019 Share Posted August 2, 2019 9 hours ago, glasgood said: Make sure that FixDisplay is not enabled Right, it is not enabled. I'm using your latest EFI folder (with updated serial info, etc). I'm going to try a few more things, maybe pull the slot 2 graphics card to see if that is causing issues. Thanks! Link to comment Share on other sites More sharing options...
Cipha Posted August 2, 2019 Share Posted August 2, 2019 10.14.6 is out which addresses a bug with sleep mode. Link to comment Share on other sites More sharing options...
gino8080 Posted August 2, 2019 Share Posted August 2, 2019 13 hours ago, larabee said: Please at least update for BIOS F9, pay attention to Serial Port, it must be disabled. I had the same error before when I forgot to disable my Serial Port. OK just updated bios to F10 Which is the setting in the BIOS to DISABLE this {censored}*ing Serial port? thank you for your time! Link to comment Share on other sites More sharing options...
pkdesign Posted August 2, 2019 Share Posted August 2, 2019 On 8/1/2019 at 1:44 PM, larabee said: Test OpenCL Compute and post it here buddy. Oh! I see. Still not stellar like you guys. Are you guys overclocking? Link to comment Share on other sites More sharing options...
larabee Posted August 2, 2019 Share Posted August 2, 2019 1 hour ago, gino8080 said: OK just updated bios to F10 Which is the setting in the BIOS to DISABLE this {censored}*ing Serial port? thank you for your time! Please refer to your manual for this, I will get you a screenshot when I have a chance, not in front my my Z390 board at this moment. 34 minutes ago, pkdesign said: Oh! I see. Still not stellar like you guys. Are you guys overclocking? uhh... glasgood is using a RX580, I'm using a vega56 with undervolting , and AudioGod is using a overclock-to-the-max rig vega56. So, the results are much higher than yours. With RX570, your result looks normal to me. Link to comment Share on other sites More sharing options...
glasgood Posted August 2, 2019 Author Share Posted August 2, 2019 (edited) 02/07/2019 @MaLd0n has kindly helped to transform the EFI, now with native NVRAM and DSDT. Have a look through the new EFI. Everything working great. EFI is perfect and minimum. Uses Whatevergreen.kext version 1.3.0 and is very stable, all port connectors on back of my RX 580 working ( @soniferous_fox ) however if updating to Whatevergreen version1.3.1 then one of the display ports may not function. Have not tested this out with SMBIOS for iMac 19,1. OsxAptioFix3Drv.efi driver now replaced with AptioMemoryFix. Whatevergreen should detect your graphics card, see my guide on how to easily change framebuffer. MASSIVE THANK YOU TO @MaLd0n @larabee @AudioGod @soniferous_fox Edited August 2, 2019 by glasgood 4 Link to comment Share on other sites More sharing options...
AudioGod Posted August 2, 2019 Share Posted August 2, 2019 23 minutes ago, glasgood said: 02/07/2019 @MaLd0n has kindly helped to transform the EFI, now with native NVRAM and DSDT. Have a look through the new EFI. Everything working great. EFI is perfect and minimum. Uses Whatevergreen.kext version 1.3.0 and is very stable, all port connectors on back of my RX 580 working ( @soniferous_fox ) however if updating to Whatevergreen version1.3.1 then one of the display ports may not function. Have not tested this out with SMBIOS for iMac 19,1. OsxAptioFix3Drv.efi driver now replaced with AptioMemoryFix. Whatevergreen should detect your graphics card, see my guide on how to easily change framebuffer. MASSIVE THANK YOU TO @MaLd0n @larabee @AudioGod @soniferous_fox Time to change it up one more time, sounds awesome brother Link to comment Share on other sites More sharing options...
larabee Posted August 2, 2019 Share Posted August 2, 2019 1 hour ago, glasgood said: 02/07/2019 @MaLd0n has kindly helped to transform the EFI, now with native NVRAM and DSDT. Have a look through the new EFI. Everything working great. EFI is perfect and minimum. Uses Whatevergreen.kext version 1.3.0 and is very stable, all port connectors on back of my RX 580 working ( @soniferous_fox ) however if updating to Whatevergreen version1.3.1 then one of the display ports may not function. Have not tested this out with SMBIOS for iMac 19,1. OsxAptioFix3Drv.efi driver now replaced with AptioMemoryFix. Whatevergreen should detect your graphics card, see my guide on how to easily change framebuffer. MASSIVE THANK YOU TO @MaLd0n @larabee @AudioGod @soniferous_fox Amazing. So, do I need to change anything for it to work with my Vega? Link to comment Share on other sites More sharing options...
AudioGod Posted August 2, 2019 Share Posted August 2, 2019 11 minutes ago, larabee said: Amazing. So, do I need to change anything for it to work with my Vega? I was just logging on to ask exactly the same thing? Link to comment Share on other sites More sharing options...
glasgood Posted August 2, 2019 Author Share Posted August 2, 2019 6 minutes ago, larabee said: Amazing. So, do I need to change anything for it to work with my Vega? What evergreen should detect your Vega card. I added a section in guide part 10 detailing how to easily change frame buffer using Clover Configurator. But try bench marks again with and without framebuffer change. As I mentioned, have not yet tried out EFI with SMBIOS for iMac 19,1 if you or @AudioGod have time to spare testing it with iMac 19,1 then I would a appreciate it Link to comment Share on other sites More sharing options...
larabee Posted August 2, 2019 Share Posted August 2, 2019 Just now, AudioGod said: I was just logging on to ask exactly the same thing? I'm changing my framebuffer in the config.plist file and the Kamarang name is not in the list, so I just typed it in. Not sure if that works or not, trying it out haha. Link to comment Share on other sites More sharing options...
Recommended Posts