nelio33 Posted May 7, 2019 Share Posted May 7, 2019 Thank you for this nice guide ! I've followed your guide but i’m blocked on part 7 when i unzip file on POST-INSTALL Aorus Pro Z390 UEFI – RX580, no EFI folder inside just BOOT and CLOVER i past it to the folder on EFI folder disk, i remove usb when t try reboot after clover splash screen, screen stay black. I put off hackintosh i plug usb, with F12 select usb hackintosh start. Thanks for help. 1 Link to comment Share on other sites More sharing options...
glasgood Posted May 7, 2019 Author Share Posted May 7, 2019 21 minutes ago, nelio33 said: Thank you for this nice guide ! I've followed your guide but i’m blocked on part 7 when i unzip file on POST-INSTALL Aorus Pro Z390 UEFI – RX580, no EFI folder inside just BOOT and CLOVER i past it to the folder on EFI folder disk, i remove usb when t try reboot after clover splash screen, screen stay black. I put off hackintosh i plug usb, with F12 select usb hackintosh start. Thanks for help. Thanks for pointing this out, I have updated EFI folder. 1 Link to comment Share on other sites More sharing options...
nelio33 Posted May 7, 2019 Share Posted May 7, 2019 7 minutes ago, glasgood said: Thanks for pointing this out, I have updated EFI folder. thank you, I redid step 7 with the new zip ...same problem, my screen remains black after the splashscreen cloverwhen i start on the usb stick no problem. my setup : MB : Z390 Aorus Pro CPU : i9 9900K RAM : 2* 8GB Ballistix tracer GPU : saphire RX 590 i receive vga today i make new installation, yesterday no problem with igpu witouht usb key Link to comment Share on other sites More sharing options...
glasgood Posted May 7, 2019 Author Share Posted May 7, 2019 (edited) 12 hours ago, nelio33 said: thank you, I redid step 7 with the new zip ...same problem, my screen remains black after the splashscreen cloverwhen i start on the usb stick no problem. my setup : MB : Z390 Aorus Pro CPU : i9 9900K RAM : 2* 8GB Ballistix tracer GPU : saphire RX 590 i receive vga today i make new installation, yesterday no problem with igpu witouht usb key Hi, How is monitor connected to Hackintosh via DisplayPort or HDMI ? Try connecting monitor to DisplayPort and check BIOS settings then try -- EFI folder inside > Edited May 8, 2019 by glasgood 1 Link to comment Share on other sites More sharing options...
trivalent Posted May 7, 2019 Share Posted May 7, 2019 Amazing Guide It got me running in NO time, exceptional! 1 Link to comment Share on other sites More sharing options...
nelio33 Posted May 7, 2019 Share Posted May 7, 2019 58 minutes ago, glasgood said: Hi, How is monitor connected to Hackintosh via DisplayPort or HDMI ? Try connecting monitor to DisplayPort and check BIOS settings then try -- EFI folder inside >POST-INSTALL Aorus Pro Z390 EFI - RX580.zip I try with new zip (copy and past and replace) screen plugged on RX 590 stay black after clover splashscreen. I go to bios i change Initial Display Output to IGFX. a restart, with hdmi plugged on motherboard hackintosh boot after splashscreen clover, i put hdmi cable on RX590 screen work fine, i restart with hdmi plugged on rx590 i can't see clover splashscreen screen stay little bit black but hackintosh boot normally... why with Initial Display Output on PCIe 1 Slot dont work ??? i change cable i use display port, now work on rx590 with Display Output on PCIe 1 Slot... not possible to use HDMI on this mode ? Link to comment Share on other sites More sharing options...
glasgood Posted May 7, 2019 Author Share Posted May 7, 2019 (edited) 1 hour ago, nelio33 said: i change cable i use display port, now work on rx590 with Display Output on PCIe 1 Slot... not possible to use HDMI on this mode ? Hello @nelio33 I have not configured RX580 HDMI port for use, though HDMI on RX580/590 may work if you disable CSM in BIOS. DisplayPort working when using my RX580/590, HDMI on the Aorus Z390 motherboard is working. If using HDMI on Aorus Z390 motherboard you will need to change BIOS settings as per guide. Ensure you have following BIOS setting: If using DisplayPort on RX580 then use following BIOS setting: BIOS setting for monitor connected to the Aorus Z390 Motherboard HDMI port: Edited May 7, 2019 by glasgood 1 Link to comment Share on other sites More sharing options...
glasgood Posted May 7, 2019 Author Share Posted May 7, 2019 (edited) 1 hour ago, nelio33 said: not possible to use HDMI on this mode ? @nelio33 HDMI on RX580/590 may work if you disable CSM in BIOS. Edited May 7, 2019 by glasgood 1 Link to comment Share on other sites More sharing options...
nelio33 Posted May 7, 2019 Share Posted May 7, 2019 1 hour ago, glasgood said: @nelio33 HDMI on RX580/590 may work if you disable CSM in BIOS. Hi Glasgood i disable CSM now hdmi work fine with pcie 1 slot configured... it's late tomorrow i'll try to start step 8 thanks for all 1 Link to comment Share on other sites More sharing options...
nelio33 Posted May 8, 2019 Share Posted May 8, 2019 Hello Glasgood i failed at step 8 imessage and facetime does not work for me. I redid the procedure several times.when I type uuidgen in the terminal it changes sometimesI have no iphone and no cameraI continue at step 9 and make some optional step, at PCI stand the processor is not recognized. any idea ? Link to comment Share on other sites More sharing options...
glasgood Posted May 8, 2019 Author Share Posted May 8, 2019 (edited) 25 minutes ago, nelio33 said: Hello Glasgood i failed at step 8 imessage and facetime does not work for me. I redid the procedure several times.when I type uuidgen in the terminal it changes sometimesI have no iphone and no cameraI continue at step 9 and make some optional step, at PCI stand the processor is not recognized. any idea ? @nelio33 Check that you have EMUVariableUefi-64.efi and OsxAptoFix2Drvfree2000.efi placed inside Clover / drivers64UEFI folder when trying to activate, can you confirm if airdrop is working ? send me your EFI folder. Your i9 9900K is not yet fully supported by macOS Mojave 10.14.4, possible support in 10.14.5. However you can fix unknown CPU see ABOUT MY MAC in my other >>guide Edited May 8, 2019 by glasgood 1 Link to comment Share on other sites More sharing options...
nelio33 Posted May 8, 2019 Share Posted May 8, 2019 44 minutes ago, glasgood said: @nelio33 Check that you have EMUVariableUefi-64.efi and OsxAptoFix2Drvfree2000.efi placed inside Clover / drivers64UEFI folder when trying to activate, can you confirm if airdrop is working ? send me your EFI folder. Your i9 9900K is not yet fully supported by macOS Mojave 10.14.4, possible support in 10.14.5. However you can fix unknown CPU see ABOUT MY MAC in my other >>guide I solve unknow cpu with your other guide, but directory is little different when using other lnguage i find file on fr folder I dont have combo wifi/bluetooth for the moment on my build, 2 efi files is oinside clover/driver64UEFI i upload file i send you liink by mail thanks for quick help Link to comment Share on other sites More sharing options...
glasgood Posted May 8, 2019 Author Share Posted May 8, 2019 4 minutes ago, nelio33 said: I dont have combo wifi/bluetooth for the moment on my build. What are you using for Wifi and Blutooth? Is airdrop working ? 1 Link to comment Share on other sites More sharing options...
corrie Posted May 9, 2019 Share Posted May 9, 2019 (edited) Amazing guide, I was successful with it, thank you. I just have three questions though if you could help me out... 1.) Will thunderbolt work if I put a card in soon? 2.) I didn't have a WiFi card when I did my hack so I set my machine up with ethernet, although I have no Ethernet capabilities either atm lol. Is it possible to enable wifi in the future after making my install an Ethernet only machine? Lol 3.) Can I do system updates? Edited May 9, 2019 by corrie Added to it 1 Link to comment Share on other sites More sharing options...
glasgood Posted May 9, 2019 Author Share Posted May 9, 2019 4 minutes ago, corrie said: Amazing guide, I was successful with it, thank you. I just have two questions though if you could help me out... 1.) Will thunderbolt work if I put a card in soon? 2.) I didn't have a WiFi card when I did my hack so I set my machine up with ethernet, although I have no Ethernet capabilities either atm lol. Is it possible to enable wifi in the future after making my install an Ethernet only machine? Lol Titan Ridge card is the recommended card to go with for thunderbolt. For hassle free, working WiFi/Bluetooth with iMessage's.. etc, I would recommend you go with the WiFi cards listed in the guide. Link to comment Share on other sites More sharing options...
corrie Posted May 9, 2019 Share Posted May 9, 2019 Yeah I plan to eventually get the WiFi card you listed, I'm just not sure if I'll have to do a reinstall when I get it though, I don't see a way to enable wifi now lol.. I'm also wondering if I'll be able to do Mojave software updates as apple rolls them out? Or will it break the build? Thanks for your time Link to comment Share on other sites More sharing options...
glasgood Posted May 9, 2019 Author Share Posted May 9, 2019 9 minutes ago, corrie said: Yeah I plan to eventually get the WiFi card you listed, I'm just not sure if I'll have to do a reinstall when I get it though, I don't see a way to enable wifi now lol.. I'm also wondering if I'll be able to do Mojave software updates as apple rolls them out? Or will it break the build? Thanks for your time All you need to do is install WiFi card, then boot into macOS desktop and WiFi will be working. No need to reinstall OS. If you are dual booting with Windows, the windows drivers for the WiFi card can be downloaded via bootcamp in macOS Mojave. There is always a chance that Apple Mojave updates will break the build, use CCC5 and back up your hackintosh build, if something breaks then you can easily restore. With CCC5 you can boot directly from your back up and quickly restore. Link to comment Share on other sites More sharing options...
corrie Posted May 9, 2019 Share Posted May 9, 2019 (edited) 7 hours ago, glasgood said: All you need to do is install WiFi card, then boot into macOS desktop and WiFi will be working. No need to reinstall OS. If you are dual booting with Windows, the windows drivers for the WiFi card can be downloaded via bootcamp in macOS Mojave. There is always a chance that Apple Mojave updates will break the build, use CCC5 and back up your hackintosh build, if something breaks then you can easily restore. With CCC5 you can boot directly from your back up and quickly restore. Great, thanks for clearing that up. For some reason my pre existing windows 10 drive got corrupted while doing this install, no idea how or why. It isn't a big deal because OS X is what i primarily want and need but i am going to try reinstalling windows 10 now for dual boot, hopefully it works. I get the message that the drive windows 10 is installed on is locked or something and can't get into windows, do you have any idea what may have happened? Also, my cpu is an i9 9900k, I'm wondering does this hack bottleneck the potential of my cpu as it was set up for a different one or does it make no difference? Edited May 9, 2019 by corrie fixed something that made no sense Link to comment Share on other sites More sharing options...
glasgood Posted May 9, 2019 Author Share Posted May 9, 2019 (edited) 34 minutes ago, corrie said: Great, thanks for clearing that up. For some reason my pre existing windows 10 drive got corrupted while doing this install, no idea how or why. It isn't a big deal because OS X is what i primarily want and need but i am going to try reinstalling windows 10 now for dual boot, hopefully it works. I get the message that the drive windows 10 is installed on is locked or something and can't get into windows, do you have any idea what may have happened? Also, my cpu is an i9 9900k, my system report reads: "Processor Speed: 3.6 GHz," I'm wondering does this hack bottleneck the potential of my cpu or is that system report just false information to convince the OS it is a real mac? Thanks ahead of time @corrie If dual booting between macOS Mojave and Windows, I find the best approach is to have both Operating Systems installed on separate drives. When installing Windows, I physically disconnect the macOS Hard drive / SSD drive from my Hackintosh machine so that Windows does not interfere with macOS bootloader. I then proceed with a EFI Windows install. Once the Windows install is complete, I then reconnect my macOS Mojave drive, then go into BIOS and set macOS Mojave as the main boot drive. Then when I boot machine, Clover automatically recognises both drives and I can choose Windows or Mac OS from Clover boot menu. Possibly your Windows installation is MBR hence why you can't get into Windows from Clover menu, that is an easy fix, just convert from MBR to EFI see guide link below. >>guide for dual booting Windows and Mojave ( EFI and MBR ). i9 9900k "Processor Speed: 3.6GHz" is the normal Processor Base Frequency for that CPU and it will turbo upto 5GHz in macOS. Best! Edited May 9, 2019 by glasgood Link to comment Share on other sites More sharing options...
corrie Posted May 9, 2019 Share Posted May 9, 2019 59 minutes ago, glasgood said: @corrie If dual booting between macOS Mojave and Windows, I find the best approach is to have both Operating Systems installed on separate drives. When installing Windows, I physically disconnect the macOS Hard drive / SSD drive from my Hackintosh machine so that Windows does not interfere with macOS bootloader. I then proceed with a EFI Windows install. Once the Windows install is complete, I then reconnect my macOS Mojave drive, then go into BIOS and set macOS Mojave as the main boot drive. Then when I boot machine, Clover automatically recognises both drives and I can choose Windows or Mac OS from Clover boot menu. Possibly your Windows installation is MBR hence why you can't get into Windows from Clover menu, that is an easy fix, just convert from MBR to EFI see guide link below. >>guide for dual booting Windows and Mojave ( EFI and MBR ). i9 9900k "Processor Speed: 3.6GHz" is the normal Processor Base Frequency for that CPU and it will turbo upto 5GHz in macOS. Best! Okay, cool. Thank you so much for both the quick responses and creating the guide in general! God bless Link to comment Share on other sites More sharing options...
nelio33 Posted May 9, 2019 Share Posted May 9, 2019 20 hours ago, glasgood said: What are you using for Wifi and Blutooth? Is airdrop working ? Hi, no wifi/bluetooth on my build, i will buy one shortly. thanks Link to comment Share on other sites More sharing options...
glasgood Posted May 9, 2019 Author Share Posted May 9, 2019 22 minutes ago, nelio33 said: Hi, no wifi/bluetooth on my build, i will buy one shortly. thanks 1 Link to comment Share on other sites More sharing options...
larabee Posted May 9, 2019 Share Posted May 9, 2019 9 hours ago, glasgood said: Titan Ridge card is the recommended card to go with for thunderbolt. For hassle free, working WiFi/Bluetooth with iMessage's.. etc, I would recommend you go with the WiFi cards listed in the guide. This card should work just fine. I've just bought it and test with my system without any issue. 1 Link to comment Share on other sites More sharing options...
nelio33 Posted May 9, 2019 Share Posted May 9, 2019 8 minutes ago, larabee said: This card should work just fine. I've just bought it and test with my system without any issue. does this card allow you to duplicate the display on several screens? Is macos optimized for this? the graphics card rx 590 install it will continue to work? or is it just an extension of UHD 630? I have several screens, what's the point of a card like this ? Link to comment Share on other sites More sharing options...
nelio33 Posted May 9, 2019 Share Posted May 9, 2019 bios update is possible ? or is recommended to stay on F5, Link to comment Share on other sites More sharing options...
Recommended Posts