79pxls Posted April 24, 2019 Share Posted April 24, 2019 Im having the same issue...hoping you are still available to help! Let me know :) Send me Robs-iMac-Pro.zip Link to comment Share on other sites More sharing options...
Speedal Posted April 25, 2019 Share Posted April 25, 2019 Hi Mald0n I've just finished my second ever Hackintosh and installed Mojave 10.14.4 almost flawlessly . I'm using a Gigabyte Z390M Gaming X with a Intel I5-9600K and a Radeon Nitro+580, with 32Mb Corsair Ram. Now everything works fine, but the shutdown. I've tried playing around with the clover files you made for a very similar combo (just the Z390m Gaming - minus the X!) but with no luck. Can you point me where the differences are? Here attached is my system... Thanks in advance! iMac di Alberto.ioreg Link to comment Share on other sites More sharing options...
MaLd0n Posted April 25, 2019 Share Posted April 25, 2019 On 4/24/2019 at 12:05 AM, 79pxls said: Im having the same issue...hoping you are still available to help! Let me know Send me Robs-iMac-Pro.zip with ur rename patches is hard to fix 6 hours ago, Speedal said: Hi Mald0n I've just finished my second ever Hackintosh and installed Mojave 10.14.4 almost flawlessly . I'm using a Gigabyte Z390M Gaming X with a Intel I5-9600K and a Radeon Nitro+580, with 32Mb Corsair Ram. Now everything works fine, but the shutdown. I've tried playing around with the clover files you made for a very similar combo (just the Z390m Gaming - minus the X!) but with no luck. Can you point me where the differences are? Here attached is my system... Thanks in advance! iMac di Alberto.ioreg need a full dump Link to comment Share on other sites More sharing options...
Speedal Posted April 26, 2019 Share Posted April 26, 2019 (edited) Probably solved adding arg slide=0 and loading driver EmuVariableUefi-64. Please check dump below to see if something else can be optimized! Muito Obrigado! Alberto send_me iMac di Alberto .zip Edited April 28, 2019 by Speedal Probably solved the problem... Link to comment Share on other sites More sharing options...
macifuc Posted May 2, 2019 Share Posted May 2, 2019 (edited) On 4/25/2019 at 3:04 PM, MaLd0n said: with ur rename patches is hard to fix need a full dump Hi, i'm experiencing startup issues and shutdown panics, also my BT is not working and i can't accelerate my graphics. I have a Gigabyte Z390 Mobo w/ Intel i7 9700k 3.6ghz processor Radeon Nitro+580 Corsaire Hx850 Gskillz 64gb Ram 64 GB 3000 MHz DDR4 attached is my info: Send me Ls-iMac.zip config.plist Edited May 2, 2019 by macifuc Uploading more files Link to comment Share on other sites More sharing options...
MaLd0n Posted May 2, 2019 Share Posted May 2, 2019 3 hours ago, macifuc said: Hi, i'm experiencing startup issues and shutdown panics, also my BT is not working and i can't accelerate my graphics. I have a Gigabyte Z390 Mobo w/ Intel i7 9700k 3.6ghz processor Radeon Nitro+580 Corsaire Hx850 Gskillz 64gb Ram 64 GB 3000 MHz DDR4 attached is my info: Send me Ls-iMac.zip config.plist Arquivo Comprimido.zip update to beta 10.14.5 Link to comment Share on other sites More sharing options...
macifuc Posted May 4, 2019 Share Posted May 4, 2019 (edited) On 5/2/2019 at 5:20 AM, MaLd0n said: Arquivo Comprimido.zip update to beta 10.14.5 HI, Much improvement since i upgraded to 10.14.4. im still having a couple issues, 1. My saphhire Rx 580 GPU isn't being accelerated EDIT: I just realized i says 8GB not MB. obviously this means its accelerated ? 2.Bluetooth & imessage stopped working(it was working perfectly before) 3. Thunderbolt 3(USBC) is not being detected anymore either. 4.How do i know if i need to assign my USB ports? Edited May 4, 2019 by macifuc Uploading more files Link to comment Share on other sites More sharing options...
Shiro Meduza Posted May 8, 2019 Share Posted May 8, 2019 good Link to comment Share on other sites More sharing options...
bashar963 Posted May 28, 2019 Share Posted May 28, 2019 i got the same issue also, random kernel panic at login and shutdown Send me 192.168.0.108.zip Link to comment Share on other sites More sharing options...
Mc2019 Posted May 31, 2019 Share Posted May 31, 2019 (edited) Hi, @MaLd0n Help me! My specification: i3-8100 Asrock B360M-pro4 Gigabyte Radeon rx570 8gb 4Gb RAM shutdown/restart -kernel panic sleep/wake don't work not all usb works Send me imac-maciej-1.home.zip config.plist Edited May 31, 2019 by Mc2019 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 31, 2019 Share Posted May 31, 2019 4 hours ago, Mc2019 said: Hi, @MaLd0n Help me! My specification: i3-8100 Asrock B360M-pro4 Gigabyte Radeon rx570 8gb 4Gb RAM shutdown/restart -kernel panic sleep/wake don't work not all usb works Send me imac-maciej-1.home.zip config.plist DSDT.aml.zip check useful links in my sig for others solution, usb etc 1 Link to comment Share on other sites More sharing options...
Mc2019 Posted June 1, 2019 Share Posted June 1, 2019 11 hours ago, MaLd0n said: DSDT.aml.zip check useful links in my sig for others solution, usb etc You are the best. Thank You! Link to comment Share on other sites More sharing options...
ilku355 Posted June 18, 2019 Share Posted June 18, 2019 Hey! I experiencing the same problem here. If you would be so kind to help me, I can send you the result of your application. My specs are the following: Gigabyte h370 hd3 Intel core i5 8600 8GB RAM Sapphire radeon rx 480 Mojave 10.14.2 And I did not use and create any DSDT patches, unfortunately I cannot do it myself :/ Also, I use Windows on this computer as well, but it is on a separate ssd. I don't know if that matters. If you need any more information then please send me an email. Thank you for your help in advance!! Have a good day. Send me Ilkus-iMac.zip Link to comment Share on other sites More sharing options...
longcoming Posted June 25, 2019 Share Posted June 25, 2019 I am having the same issue here.I am always getting the same message:Your computer has been shut down because of a problem. Send me iMac.zip Link to comment Share on other sites More sharing options...
jda Posted July 22, 2019 Share Posted July 22, 2019 I'm having the same problem here, and my usb 2.0 isn't working either, this is my configuration CPU Intel XEON 6 core socket 2011 Chinese Motherboard "x79" (uses h61 chipset) only usb 2.0 RX580 8gb working out the box to boot I use npci=0x2000 flag, the computer is working in 100% except for the shutdown or restart (I have kernelpanic) and the usb ports, I tried with every kext to make it working with no results. Currently I'm using a pci-e 3.0 usb card without problems. My clover files are attached in the post. I hope this can be fixed! CLOVER.zip On 5/31/2019 at 3:45 PM, MaLd0n said: DSDT.aml.zip check useful links in my sig for others solution, usb etc can you help me? please! Link to comment Share on other sites More sharing options...
MaLd0n Posted July 23, 2019 Share Posted July 23, 2019 23 minutes ago, jda said: I'm having the same problem here, and my usb 2.0 isn't working either, this is my configuration CPU Intel XEON 6 core socket 2011 Chinese Motherboard "x79" (uses h61 chipset) only usb 2.0 RX580 8gb working out the box to boot I use npci=0x2000 flag, the computer is working in 100% except for the shutdown or restart (I have kernelpanic) and the usb ports, I tried with every kext to make it working with no results. Currently I'm using a pci-e 3.0 usb card without problems. My clover files are attached in the post. I hope this can be fixed! CLOVER.zip can you help me? please! i think in ur case is a genericxhci keext post full dump --Run_Me RunMe.apphttps://www.youtube.com/watch?v=k9wmIfGLe3A Link to comment Share on other sites More sharing options...
jda Posted July 23, 2019 Share Posted July 23, 2019 (edited) 28 minutes ago, MaLd0n said: i think in ur case is a genericxhci keext post full dump --Run_MeRunMe.apphttps://www.youtube.com/watch?v=k9wmIfGLe3A I tried that kext for the USB and nothing happen, my board only have usb2.0 and its Intel Chipset, but none of the ports are recognised. I fixed it in a part installing the usb card. But the major issue is the shutdown restart Files attached! The other thing is I have 32gb of ram (4 modules 8gb ddr3), and in the first instance the system only recognise 2 modules (16gb total) and I added manually in the boot.plist all of the 4 modules and now says 32gb of ram but I don't know if the system uses it properly. Send me Hackintoshs-MacBook-Pro.zip Edited July 23, 2019 by jda Link to comment Share on other sites More sharing options...
MaLd0n Posted July 23, 2019 Share Posted July 23, 2019 2 hours ago, jda said: I tried that kext for the USB and nothing happen, my board only have usb2.0 and its Intel Chipset, but none of the ports are recognised. I fixed it in a part installing the usb card. But the major issue is the shutdown restart Files attached! The other thing is I have 32gb of ram (4 modules 8gb ddr3), and in the first instance the system only recognise 2 modules (16gb total) and I added manually in the boot.plist all of the 4 modules and now says 32gb of ram but I don't know if the system uses it properly. Send me Hackintoshs-MacBook-Pro.zip EFI.zip use my full efi folder, but u need remove hackintosh kexts frrom l/e and s/l/e Link to comment Share on other sites More sharing options...
jda Posted July 23, 2019 Share Posted July 23, 2019 (edited) 1 hour ago, MaLd0n said: EFI.zip use my full efi folder, but u need remove hackintosh kexts frrom l/e and s/l/e It doesn't work I initially deleted the kext and loaded that folder but doesn't boot. I reinstalled everything from 0 and the same results. What can I do? the screen show this and then restarts.... sometimes it passes that screen and still load but restarts too, I can't see what shows because its too quick the restart. EDIT: I restored the bios settings and now always passes that screen, but it restarts here (so quickly, I used the iPhone slow mo camera to capture this) Edited July 23, 2019 by jda Link to comment Share on other sites More sharing options...
jda Posted July 23, 2019 Share Posted July 23, 2019 32 minutes ago, jda said: It doesn't work I initially deleted the kext and loaded that folder but doesn't boot. I reinstalled everything from 0 and the same results. What can I do? the screen show this and then restarts.... sometimes it passes that screen and still load but restarts too, I can't see what shows because its too quick the restart. EDIT: I restored the bios settings and now always passes that screen, but it restarts here (so quickly, I used the iPhone slow mo camera to capture this) EDIT AGAIN: it's something whit the memory, I booted with only one dimm and it works!! USB works but the shutdown and restarts keeps working bad, when I shutdown the computer restarts and I get a message Your computer has been shut down because of a problem. Link to comment Share on other sites More sharing options...
Crgriseus Posted July 28, 2019 Share Posted July 28, 2019 (edited) EDIT: Sorry I see it's a Mojave topic. I'm on high sierra. I hope it's not a problem. Thanks. Hi MaLd0n! I'm hackintoshing about a few months, and almost everything works perfectly. My only issue is the sleep and computer restarting. Now it's even worse... My hackintosh always been woke up during sleep, but slept back after a minuter or two. Annoyed me first, and I get used to it about a while. But now it's simply restarts the computer during the sleep. I only moved my computer to another room and plugged everything back as should be. Maybe it's related to my USB connectors, because they not working on USB 3.0, 3.1 speed, only 2.0. I'd like to resolve these, but I feel it's something I can't do by myself. My issues in nutshell: • Kernel panic on restart, or simply turning on the computer. • Computer can't stay in sleep. Wakes up, now simply restart the whole system. • USB connectors working on USB2 only. • Additional: Maybe it's unique, but on displayport I can see some vertical lines in greys or in some specific colors on my monitor. I'm pretty sure it's not the monitors or the cables issue, because on windows I can't see those lines. Looks like nVidia driver related or something. I used your RunMe app already. I hope you can help. Thanks, Adam Send me Adams-iMac.zip Edited July 28, 2019 by Crgriseus Link to comment Share on other sites More sharing options...
MaLd0n Posted July 28, 2019 Share Posted July 28, 2019 1 hour ago, Crgriseus said: Hi MaLd0n! replace full efi, reboot EFI.zip Link to comment Share on other sites More sharing options...
Crgriseus Posted July 29, 2019 Share Posted July 29, 2019 23 hours ago, MaLd0n said: replace full efi, reboot EFI.zip It's working! Thank you so much I really appreciate it! USB-s still on 2.0 speed. I tested with Blackmagic disk speed test. What should I looking for now? I've read about DSDT patches. May I need to do that on my computer or something else? Thank you! Link to comment Share on other sites More sharing options...
MaLd0n Posted July 29, 2019 Share Posted July 29, 2019 2 hours ago, Crgriseus said: It's working! Thank you so much I really appreciate it! USB-s still on 2.0 speed. I tested with Blackmagic disk speed test. What should I looking for now? I've read about DSDT patches. May I need to do that on my computer or something else? Thank you! full dsdt patched stay inside clover/acpi/patched, check there Link to comment Share on other sites More sharing options...
Crgriseus Posted July 29, 2019 Share Posted July 29, 2019 (edited) 3 hours ago, MaLd0n said: full dsdt patched stay inside clover/acpi/patched, check there Yeah it's there. Writing test still shows me 10 Mb/s on my usb 3.1 drive plugged in front USB 3.0 slot. Edited July 29, 2019 by Crgriseus grammar Link to comment Share on other sites More sharing options...
Recommended Posts