l_konst76 Posted September 18, 2018 Share Posted September 18, 2018 Thanks a lot! you're a Magician! ;) 1 Link to comment Share on other sites More sharing options...
Bibhudatt Posted September 20, 2018 Share Posted September 20, 2018 (edited) On 9/18/2018 at 10:26 AM, Fyz said: yes Well That's Nice But Have You Tested It Or You're Just Estimated That It Would Work ? Edited October 1, 2018 by Bibhudatt Link to comment Share on other sites More sharing options...
Bibhudatt Posted September 20, 2018 Share Posted September 20, 2018 On 9/9/2018 at 9:49 AM, Badruzeus said: Nice, could you attach "CodeDisplay" binary from 10.13.4 plz? Thanks. Do We Need To InjectNvidia In Clover ??? My Specs - Dell Inspiron 660S i5 33330s Running At 3.12Ghz. 8Gb DDR3 Ram Modules {Dual Sticks - Corsair Vengeance At 2100Mhz} Two Hard Drives And One SSD. Zotac GT610 2Gb DDR3 Synergy Edition macOS 10.12.5 - Sierra - HDD1 macOS 10.11.6 - El Capitan -HDD2 macOS 10.14 Beta 11 - Mojave -SSD Link to comment Share on other sites More sharing options...
xtddd Posted September 22, 2018 Share Posted September 22, 2018 Will This Kext Work For nvidia quadro 1000m ?? Link to comment Share on other sites More sharing options...
Bibhudatt Posted September 22, 2018 Share Posted September 22, 2018 8 minutes ago, xtddd said: Will This Kext Work For nvidia quadro 1000m ?? nVidia Quadro 1000m Is Fermi But Not Officially Tested And You Should Also Note That My GT 610 Doesn't Work As Well. 1 Link to comment Share on other sites More sharing options...
Bibhudatt Posted September 30, 2018 Share Posted September 30, 2018 Does Mojave Work With GT610 ? My Specs - i5 3330s @ 2.7 Ghz 8Gbs Of Ram (Dual Sticks Of Corsair Vengeance 1600mhz) El Capitan On An SSD. Sierra On A Hard Drive. GPU- Zotac Geforce Gt 610 2GB Synergy Edition. Link to comment Share on other sites More sharing options...
vdiamant Posted September 30, 2018 Share Posted September 30, 2018 (edited) On 6/9/2018 at 7:26 AM, m1g2 said: Hi everyone, the Geforce GT610 works OOTB under Mojave What's your clover? did you install nvdia drivers or just install the mac os? Thanks in advance Edited September 30, 2018 by vdiamant Link to comment Share on other sites More sharing options...
Allan Posted October 1, 2018 Share Posted October 1, 2018 Please use our "Search" button - You'll find it at the right top of the page. Link to comment Share on other sites More sharing options...
Bibhudatt Posted October 2, 2018 Share Posted October 2, 2018 6 hours ago, Allan said: Please use our "Search" button - You'll find it at the right top of the page. Allan, It Is A Developer Preview On Which M1G2 Was Able To Get The Gt610 Working But The Things Are Not The Same Anymore. Mojave Has Been Officially Announced By Apple And The GT610 Doesn't Work In That Anymore. Although Thank You For Your Answer. Link to comment Share on other sites More sharing options...
Mahesh6089 Posted October 3, 2018 Share Posted October 3, 2018 On 6/9/2018 at 9:56 AM, m1g2 said: Hi everyone, the Geforce GT610 works OOTB under Mojave Please upload your EFI..... Thx 1 Link to comment Share on other sites More sharing options...
winipcfg Posted October 3, 2018 Share Posted October 3, 2018 Hello, I got a gtx460, does that mean other than replacing coredisplay and putting the kext to clover, I still need to edit the info.plist inside the kext by changing "GF100" to "GF104"? thank you! Link to comment Share on other sites More sharing options...
nmano Posted October 7, 2018 Share Posted October 7, 2018 On 9/20/2018 at 6:35 AM, Bibhudatt said: I update 10.14.1 worked with same patched (kext and CoreDisplay) 1 Link to comment Share on other sites More sharing options...
Bibhudatt Posted October 7, 2018 Share Posted October 7, 2018 2 hours ago, nmano said: I update 10.14.1 worked with same patched (kext and CoreDisplay) When I Tried Update, My Gt610 Never Got Full Acceleration. What Is Happening ? Link to comment Share on other sites More sharing options...
m1g2 Posted October 8, 2018 Author Share Posted October 8, 2018 (edited) Hi, you need the attached kext in System / Library / Extension and you need to replace the binary coredisplay in System / Library / Frameworks / CoreDisplay.frameworks / Versions / A / smbios imac 14.2 and clover 4674 if you do not see the mouse pointer you need mouse locator CoreDisplay.zip GeForce-GF100-Series.kext.zip Edited October 8, 2018 by m1g2 Link to comment Share on other sites More sharing options...
Slice Posted October 10, 2018 Share Posted October 10, 2018 The Nvidia Fermi doesn't support PCIe 3.0 protocol so why it will not fully working in 10.13+ systems. You have to stay with 10.11.6 (not sure about 10.12) or change graphics card. 2 Link to comment Share on other sites More sharing options...
berto648 Posted October 21, 2018 Share Posted October 21, 2018 for some reason using the kext and the displaycore i get crash in verbose. Removed the kext and replaced the coredisplay with the original....nothing. Had to reinstall mojave and now im trying other methods... going to give up on the quadro 600 (gf108) card. In Sierra the bad boy is showing up perfect with the nvidiagraphicfix kext and inject nvidia selected. But in mojave I get full resolution but no acceleration. Lags on 1080p youtube. A shame. I try rolling back the kext from my working 10.12.6 install but i get stuck on verbose at random instances... oh well lol. If anyone has any ideas id appreciate it. I never tried the card on high sierra. The one time i did i got all sorts of glitches.... but with full resolution using the same method as Sierra. Moved on and then tried the Mojave and i actually got a stable desktop but with no open gl support. So sluggish on things Link to comment Share on other sites More sharing options...
cecotto Posted October 22, 2018 Share Posted October 22, 2018 GTX560Ti work at 10.14 with kext, CoreDisplay and injectNvidia in clover Link to comment Share on other sites More sharing options...
berto648 Posted October 22, 2018 Share Posted October 22, 2018 8 hours ago, cecotto said: GTX560Ti work at 10.14 with kext, CoreDisplay and injectNvidia in clover hopefully the gtx 550 ti works too.. ill try and post my results... thats insane thou. Fermi on Mojave.... Link to comment Share on other sites More sharing options...
BakaPhoenix Posted October 23, 2018 Share Posted October 23, 2018 will this wokrs on a 660ti? 660ti used to have glitches on high sierra so i'm still on sierra Link to comment Share on other sites More sharing options...
anard Posted October 24, 2018 Share Posted October 24, 2018 (edited) Hi everyone. I just upgraded my Hack (named iMack in my signature) from Sierra to Mojave and my GTX570 (GF110) doesn't work. It's OK but seems that Metal isn't fully supported and screen is always blinking. I have tried your GeForce-GF100-Series.kext with or without your CoreDisplay in S/L/Frameworks/CoreDisplay.framework/Versions/A/ with no result. When I boot without the GeForce-GF100-Series kext, it's OK but screen always blink. If I try to boot with your kext, it stops on opening the session : I have the rotating circle, this one we can see on shut down or just a black screen with mouse pointer when using your CoreDisplay. I took a screenshot with CoreDisplay and GeForce kext in verbose mode. Here is what I see when boot stops : Hope you could help me. Thanks so much for your work. Edited October 24, 2018 by anard Link to comment Share on other sites More sharing options...
Bibhudatt Posted October 24, 2018 Share Posted October 24, 2018 1 hour ago, anard said: Hi everyone. I just upgraded my Hack from Sierra to Mojave and my GTX570 (GF110) doesn't work. It's OK but seems that Metal isn't fully supported and screen is always blinking. I have tried your GeForce-GF100-Series.kext with or without your CoreDisplay in S/L/Frameworks/CoreDisplay.framework/Versions/A/ with no result. When I boot without the GeForce-GF100-Series kext, it's OK but screen always blink. If I try to boot with your kext, it stops on opening the session : I have the rotating circle, this one we can see on shut down or just a black screen with mouse pointer when using your CoreDisplay. I took a screenshot with CoreDisplay and GeForce kext in verbose mode. Here is what I see when boot stops : Hope you could help me. Thanks so much for your work. I have the same issue. How can I solve this issue ? (Question asked to the OP of this thread and to those people who got their cards working. Any help would be appreciated.) Link to comment Share on other sites More sharing options...
a59 Posted October 24, 2018 Share Posted October 24, 2018 (edited) There's a missing crucial point here already pointed out by one of the Mods, the working method and shared kexts/Coredisplay framework should theoretically work under 10.14 Beta (18A293u) as shown in the opening post, not the following version as i personally tested, the only version which i got full acceleration under and normal resolution is 10.14 Beta (18A293u), the final release had no acceleration incl with HS Web drivers. I wouldn't hold my breath for a web drivers fix, i think its obvious that GT 610 is an old outdated card and its not ideal to run Mojave that's why it was dropped after the first public beta by Apple. If you insist to run Mojave with this card you can download 10.14 Beta (18A293u) and stick to it or buy a new card. My GT 610 is natively supported on the first beta, everything works fine, no stuttering whatsoever just one issue with the mouse cursor not showing up, you can solve this by changing your mouse cursor size under accessibility settings (shake the mouse rapidly to locate the cursor) in order to resize it, and then download mouse scape app and download a third party small/tiny arrow to replace the OS cursor with. Edited October 24, 2018 by a59 Link to comment Share on other sites More sharing options...
Slice Posted October 26, 2018 Share Posted October 26, 2018 @a59 I don't think so. 1. 610 is Fermi card which was not working under 10.13 nor in 10.14 even if very beta. Support was dropped years ago. 2. Users reported success in 10.14.1 1 Link to comment Share on other sites More sharing options...
FZSX Posted November 16, 2018 Share Posted November 16, 2018 Well ive Kepler based gt 710 card. Issues: Black Screen when booting with default drivers or nvda_drv=1 mode OR White/Grey Screen with 1 sec mouse movement then freezed keyboard and mouse with nv_disable=1. Tested: tried numerous ways to boot Mojave but does not works such as > High Sierra/Sierra default Apple geforce nvda kexts, High Sierra Web Drivers, various clover configs, display edids, HDMI dvi port tests... so on. Specs: Tri Boot Setup: Windows 10, Sierra(gt 710 works OOB, or with Web Drivers too), Mojave. ASUS P5G41TM LX Core2Duo E8500 Gigabyte Nvidia Geforce GT 710 2GB Link to comment Share on other sites More sharing options...
ilovefifa Posted April 6 Share Posted April 6 @Slice @nmanofor me,it is a nice day,i got full support with Metal on Mojave 10.14.4 by a Fermi card.i just bought a GTX460 replaced the GTX550 Ti(very very cheap in China now,RMB43 yuan),after reading your topic many times,also had tested many times 1 Link to comment Share on other sites More sharing options...
Recommended Posts