xuzhimin Posted January 26, 2019 Share Posted January 26, 2019 Thanks to the help of the author of voodooi 2c, I modified voodooi 2c. Now you can use the touch pad. Please install it to L/E or S/L/E voodooi2c.zip 1 Link to comment Share on other sites More sharing options...
omega_xl Posted February 19, 2019 Share Posted February 19, 2019 On 12/9/2018 at 7:29 PM, cunc.cameron said: Currently trying this guide on my Surface but I can't seem to get past this error - hangs after End RandomSeed once I've selected to boot the macOS installer. I've reinstalled clover, reformatted the USB, tried adding more drivers, no luck. Any ideas? Also tried using the clover version from when this guide was created and still, nothing. Can't be the USB, as I've successfully installed Mojave onto my desktop with this same one. I'm lost. remove osxaptio from driversuefi Link to comment Share on other sites More sharing options...
Naborisk Posted March 3, 2019 Share Posted March 3, 2019 On 1/26/2019 at 5:20 PM, xuzhimin said: Thanks to the help of the author of voodooi 2c, I modified voodooi 2c. Now you can use the touch pad. Please install it to L/E or S/L/E voodooi2c.zip are multi touch gestures working? if so, how smooth is it? Link to comment Share on other sites More sharing options...
xuzhimin Posted March 16, 2019 Share Posted March 16, 2019 On 3/3/2019 at 7:52 PM, Naborisk said: are multi touch gestures working? if so, how smooth is it? yes，all work Link to comment Share on other sites More sharing options...
mrblackm123 Posted March 17, 2019 Share Posted March 17, 2019 On 1/26/2019 at 10:20 AM, xuzhimin said: Thanks to the help of the author of voodooi 2c, I modified voodooi 2c. Now you can use the touch pad. Please install it to L/E or S/L/E voodooi2c.zip Can u plz make it work for surface book 2 that will be so coool thx Link to comment Share on other sites More sharing options...
xuzhimin Posted March 20, 2019 Share Posted March 20, 2019 On 3/17/2019 at 4:58 AM, mrblackm123 said: Can u plz make it work for surface book 2 that will be so coool thx Voodooi2c source code has added keyboard processing code, you can compile it yourself Link to comment Share on other sites More sharing options...
Naborisk Posted March 30, 2019 Share Posted March 30, 2019 On 3/16/2019 at 2:04 PM, xuzhimin said: yes，all work I finally got the trackpad working, but the trackpad settings cannot be configured from system preferences. Can you configure trackpad settings? (e.g. enable tap to click, 3 finger drag, etc.) Link to comment Share on other sites More sharing options...
xuzhimin Posted April 5, 2019 Share Posted April 5, 2019 On 3/30/2019 at 10:01 PM, Naborisk said: I finally got the trackpad working, but the trackpad settings cannot be configured from system preferences. Can you configure trackpad settings? (e.g. enable tap to click, 3 finger drag, etc.) yes,I can Link to comment Share on other sites More sharing options...
SoxasoraIT Posted April 28, 2019 Author Share Posted April 28, 2019 On 4/5/2019 at 3:40 PM, xuzhimin said: yes,I can So, how do you enable trackpad settings in System Preferences? I mean, i have Voodoo I2C installed and the DSDT patch too, what did you do? Link to comment Share on other sites More sharing options...
SoxasoraIT Posted April 28, 2019 Author Share Posted April 28, 2019 Updated CLOVER EFI folder available for macOS 10.14.4+ Changelog: - CLOVER bootloader updated to latest version because 10.14.4 breaks kext injection. - Kexts updated for 10.14.4 - DSDT patch of VoodooI2C applied but still not working (Trackpad gestures) Known Issues: - VoodooHDA may cause somewhat of kernel panic, rare and only during boot. Booting macOS blocking VoodooHDA injection via CLOVER and then rebooting without blocking will fix the kernel panic. Odd, right? Link to comment Share on other sites More sharing options...
xuzhimin Posted April 30, 2019 Share Posted April 30, 2019 You need to install the modified version of voodooi2c that I provided, put it into S/L/E or L/E, fix the permissions and rebuild the cache, and then restart. After rebooting, you need to make sure that voodooi2c is loaded. In another forum, many people have succeeded. With an address on it Link to comment Share on other sites More sharing options...
xuzhimin Posted April 30, 2019 Share Posted April 30, 2019 On 4/28/2019 at 2:25 PM, SoxasoraIT said: So, how do you enable trackpad settings in System Preferences? I mean, i have Voodoo I2C installed and the DSDT patch too, what did you do? https://github.com/alexandred/VoodooI2CHID/pull/3 I am based on this source code modified voodooi2chid, confirmed that this can be used on surface pro5, surface pro 5 recently updated uefi firmware 234.2344.769, you update this configuration file can not enter the system, will be stuck in +++, After experimenting, on 10.14.4, in some special cases, third-party kext may not be able to load, some may, maybe you can't use keyboard gestures, I am also looking for reasons https://www.tonymacx86.com/threads/surface-pro-2017-install-mojave.273868/ This is the configuration file that the new uefi firmware can start, but there are some problems, such as the need to remove osxaptio* and must be added to emu*. Some people will not be able to modify the system permissions after using it, and cannot load third-party kext, such as voodooi2c, it must be installed in S/L/E or L/E Link to comment Share on other sites More sharing options...
wojcia01 Posted May 12, 2019 Share Posted May 12, 2019 i have xit randomseed error after i removed osxaptio from driversuefi as advised above im getting kernel panic. Any ideas? Link to comment Share on other sites More sharing options...
Michaelaperkins Posted June 3, 2019 Share Posted June 3, 2019 Hi All i have a surface pro 4 intel i5 6300u has the intel hd520 chip i am trying to get this to work with mojave i have got it to boot into mojave by clover but cannot get the graphics to work correctly When i boot they are sooooooo small lol does anyone have a working EFI Folder ? Thank you All Mike Link to comment Share on other sites More sharing options...
VrTech Posted June 15, 2019 Share Posted June 15, 2019 Does this work with Surface Pro 5 i7 version? Thanks ! Link to comment Share on other sites More sharing options...
VrTech Posted June 18, 2019 Share Posted June 18, 2019 I was managed to install the Mojave but I can't access it with the file provided :( I'm using I7 8G btw Link to comment Share on other sites More sharing options...
iPfeils Posted August 22, 2019 Share Posted August 22, 2019 (edited) Thumbs up! Installation done... but my resolution is not that good. Acceleration is working but I do not have a valid resolution. About my Mac shows an Internal Retina display running 1368 not 2736 Maybe I am wrong but what about your resolution. Under system settings - Graphics: Intel HD 620 1536 MB BUS: Build-In Metal: supported Display: 2736 x 1824 UI Looks like: 1368 x 912 @60 Hz - seems to be wired, or? Connection Type: Display Port Thanks for a quick replay. Cheers, P Edited August 22, 2019 by iPfeils Link to comment Share on other sites More sharing options...
Harris0n Posted August 26, 2019 Share Posted August 26, 2019 Does the battery work? Link to comment Share on other sites More sharing options...
enfilator18000 Posted October 9, 2019 Share Posted October 9, 2019 bonjour , voila quand j'installe la mise a jour Catalina finale au démarrage de Clover efi impossible de boot sur Catalina car le logo pour lancer Catalina n'apparait plus seul le recovery existe :s je suis sur Clover efi 5070 Link to comment Share on other sites More sharing options...
mrvtec Posted October 13, 2019 Share Posted October 13, 2019 @SoxasoraIT @xuzhimin dose your latest efi having working HiDPI?? or is it still glitchy when using HiDPI? im using hackermans efi from github but getting glitches when using HiDPI thanks Link to comment Share on other sites More sharing options...
enfilator18000 Posted October 19, 2019 Share Posted October 19, 2019 hello, someone successfully installed catalina properly on surface pro 5 I5? Link to comment Share on other sites More sharing options...
mid Posted November 24, 2019 Share Posted November 24, 2019 Touchpad is working, just install VoodooI2C.kext 2.1.4 in S/L/E Link to comment Share on other sites More sharing options...
mid Posted November 24, 2019 Share Posted November 24, 2019 Try this EFI/CLOVERclover.zip Link to comment Share on other sites More sharing options...
enfilator37100 Posted November 24, 2019 Share Posted November 24, 2019 12 hours ago, mid said: Try this EFI/CLOVERclover.zip For catalina EFI? Link to comment Share on other sites More sharing options...
mid Posted November 25, 2019 Share Posted November 25, 2019 15 hours ago, enfilator37100 said: For catalina EFI? Mojave 10.14.6 EFI Link to comment Share on other sites More sharing options...
Recommended Posts