yapan4 Posted April 24, 2019 Share Posted April 24, 2019 I will be able only after work. I also tried many options with droping different OEM ACPI SSDTs, no results... Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 (edited) 4 hours ago, fabiosun said: post also config.plist you are using if possible This is what I tried to boot on. Mac-B809C3757DA9BB8D.plist is the (hopefully) edited plist after running freVectorsEdit.sh. Mac-B809C3757DA9BB8D.plist config.plist SSDT-CpuPm.aml Edited April 24, 2019 by obus Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 11 minutes ago, obus said: This is what I tried to boot on. Mac-B809C3757DA9BB8D.plist is the (hopefully) edited plist after running freVectorsEdit.sh. Mac-B809C3757DA9BB8D.plist config.plist SSDT-CpuPm.aml If you want try with this config config-2.plist.zip Link to comment Share on other sites More sharing options...
hardcorehenry Posted April 24, 2019 Share Posted April 24, 2019 3 minutes ago, fabiosun said: If you want try with this config config-2.plist.zip Sorry for cutting in, I'm not expert of Xeon processors, but I saw your configs ang I think you should untick plugin type in your config, because you using SSDT.aml which contain plugin-type. 1 Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 I have not touched that section..I had only SSDT name in sorted order section and some drop acpi table Link to comment Share on other sites More sharing options...
hardcorehenry Posted April 24, 2019 Share Posted April 24, 2019 11 minutes ago, fabiosun said: I have not touched that section..I had only SSDT name in sorted order section and some drop acpi table I meant like that Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 yes I have understood but Plugintype was flagged in config.plist @obus shared here and I have not touched it..hower he could try also to unflag it and see if he is sure SSDT for cpu is loaded fine Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 18 minutes ago, hardcorehenry said: Sorry for cutting in, I'm not expert of Xeon processors, but I saw your configs ang I think you should untick plugin type in your config, because you using SSDT.aml which contain plugin-type. good point @hardcorehenry! I will uncheck and test with @fabiosun:s config.plist. Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 Not working. No FV and no XCPM. Tried with both checked and unchecked plugin in clover. Last login: Wed Apr 24 16:18:07 on console iMacPro:~ admin$ sysctl -a | grep xcpm machdep.xcpm.mode: 0 machdep.xcpm.hard_plimit_max_100mhz_ratio: 0 machdep.xcpm.hard_plimit_min_100mhz_ratio: 0 machdep.xcpm.soft_plimit_max_100mhz_ratio: 0 machdep.xcpm.soft_plimit_min_100mhz_ratio: 0 machdep.xcpm.tuib_plimit_max_100mhz_ratio: 0 machdep.xcpm.tuib_plimit_min_100mhz_ratio: 0 machdep.xcpm.tuib_enabled: 0 machdep.xcpm.power_source: 0 machdep.xcpm.bootplim: 0 machdep.xcpm.bootpst: 0 machdep.xcpm.tuib_ns: 0 machdep.xcpm.vectors_loaded_count: 0 machdep.xcpm.ratio_change_ratelimit_ns: 500000 machdep.xcpm.ratio_changes_total: 0 machdep.xcpm.maxbusdelay: 0 machdep.xcpm.maxintdelay: 0 machdep.xcpm.mid_applications: 0 machdep.xcpm.mid_relaxations: 0 machdep.xcpm.mid_mode: 1 machdep.xcpm.mid_cst_control_limit: 0 machdep.xcpm.mid_mode_active: 0 machdep.xcpm.mbd_mode: 1 machdep.xcpm.mbd_applications: 0 machdep.xcpm.mbd_relaxations: 0 machdep.xcpm.forced_idle_ratio: 100 machdep.xcpm.forced_idle_period: 30000000 machdep.xcpm.deep_idle_log: 0 machdep.xcpm.qos_txfr: 1 machdep.xcpm.deep_idle_count: 0 machdep.xcpm.deep_idle_last_stats: n/a machdep.xcpm.deep_idle_total_stats: n/a machdep.xcpm.cpu_thermal_level: 0 machdep.xcpm.gpu_thermal_level: 0 machdep.xcpm.io_thermal_level: 0 machdep.xcpm.io_control_engages: 0 machdep.xcpm.io_control_disengages: 0 machdep.xcpm.io_filtered_reads: 0 machdep.xcpm.io_cst_control_enabled: 0 machdep.xcpm.ring_boost_enabled: 0 machdep.xcpm.io_epp_boost_enabled: 0 machdep.xcpm.epp_override: 0 iMacPro:~ admin$ 1 Link to comment Share on other sites More sharing options...
hardcorehenry Posted April 24, 2019 Share Posted April 24, 2019 7 minutes ago, obus said: Not working. No FV and no XCPM. Tried with both checked and unchecked plugin in clover. Last login: Wed Apr 24 16:18:07 on console iMacPro:~ admin$ sysctl -a | grep xcpm machdep.xcpm.mode: 0 machdep.xcpm.hard_plimit_max_100mhz_ratio: 0 machdep.xcpm.hard_plimit_min_100mhz_ratio: 0 machdep.xcpm.soft_plimit_max_100mhz_ratio: 0 machdep.xcpm.soft_plimit_min_100mhz_ratio: 0 machdep.xcpm.tuib_plimit_max_100mhz_ratio: 0 machdep.xcpm.tuib_plimit_min_100mhz_ratio: 0 machdep.xcpm.tuib_enabled: 0 machdep.xcpm.power_source: 0 machdep.xcpm.bootplim: 0 machdep.xcpm.bootpst: 0 machdep.xcpm.tuib_ns: 0 machdep.xcpm.vectors_loaded_count: 0 machdep.xcpm.ratio_change_ratelimit_ns: 500000 machdep.xcpm.ratio_changes_total: 0 machdep.xcpm.maxbusdelay: 0 machdep.xcpm.maxintdelay: 0 machdep.xcpm.mid_applications: 0 machdep.xcpm.mid_relaxations: 0 machdep.xcpm.mid_mode: 1 machdep.xcpm.mid_cst_control_limit: 0 machdep.xcpm.mid_mode_active: 0 machdep.xcpm.mbd_mode: 1 machdep.xcpm.mbd_applications: 0 machdep.xcpm.mbd_relaxations: 0 machdep.xcpm.forced_idle_ratio: 100 machdep.xcpm.forced_idle_period: 30000000 machdep.xcpm.deep_idle_log: 0 machdep.xcpm.qos_txfr: 1 machdep.xcpm.deep_idle_count: 0 machdep.xcpm.deep_idle_last_stats: n/a machdep.xcpm.deep_idle_total_stats: n/a machdep.xcpm.cpu_thermal_level: 0 machdep.xcpm.gpu_thermal_level: 0 machdep.xcpm.io_thermal_level: 0 machdep.xcpm.io_control_engages: 0 machdep.xcpm.io_control_disengages: 0 machdep.xcpm.io_filtered_reads: 0 machdep.xcpm.io_cst_control_enabled: 0 machdep.xcpm.ring_boost_enabled: 0 machdep.xcpm.io_epp_boost_enabled: 0 machdep.xcpm.epp_override: 0 iMacPro:~ admin$ I think you shouldn't rename your generated SSDT like that, because you put in sorted order then the same name of your SSDT is in drop tables. This name I guess is reserved for your OEM. You should leave original name SSDT.aml and your config would look like that. Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 (edited) 56 minutes ago, hardcorehenry said: I think you shouldn't rename your generated SSDT like that, because you put in sorted order then the same name of your SSDT is in drop tables. This name I guess is reserved for your OEM. You should leave original name SSDT.aml and your config would look like that. You mean SSDT.aml and SSDT-1.aml and so on? Drop OEM is always checked. For the moment I have two SSDT. SSDT-CpuPm.aml and SSDT-C422-All-iMacPro.aml. Could you please sow me how you mean? Edited April 24, 2019 by obus Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 18 minutes ago, obus said: You mean SSDT.aml and SSDT-1.aml and so on? Drop OEM is always checked. For the moment I have two SSDT. SSDT-CpuPm.aml and SSDT-C422-All-iMacPro.aml. Could you please sow me how you mean? rename this : SSDT-CpuPm.aml in SSDT.aml if I understand well and then put the same name in sorted order Link to comment Share on other sites More sharing options...
hardcorehenry Posted April 24, 2019 Share Posted April 24, 2019 (edited) 24 minutes ago, obus said: You mean SSDT.aml and SSDT-1.aml and so on? Drop OEM is always checked. For the moment I have two SSDT. SSDT-CpuPm.aml and SSDT-C422-All-iMacPro.aml. Could you please sow me how you mean? SSDT generated with Pike's script (containing Plugin-type) shouldn't be named as SSDT-CpuPm.aml, if you are going to drop tables CPU OEM (CpuPM and Cpu0Ist). You can name it SSDT.aml Edited April 24, 2019 by hardcorehenry Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 (edited) Ok. I renamed my two SSDT to SSDT.aml and SSDT-1.aml. Cleared NVRAM and tried with and without plugin checked and still no progress. It seems that FV and PM consecuentely not loading at all when using bootstrap. When using PMhart _xcpm_pkg_scope_msrs_ everything seems to work fine. Why? Edited April 24, 2019 by obus Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 3 minutes ago, obus said: Ok. I renamed my two SSDT to SSDT.aml and SSDT-1.aml. Cleared NVRAM and tried with and without plugin checked and still no progress. It seems that FV and PM consecuentely not loading at all when using bootstrap. When using PMhart _xcpm_pkg_scope_msrs_ everything seems to work fine. Why? could you post a terminal output to see all data? 6 minutes ago, obus said: Ok. I renamed my two SSDT to SSDT.aml and SSDT-1.aml. Cleared NVRAM and tried with and without plugin checked and still no progress. It seems that FV and PM consecuentely not loading at all when using bootstrap. When using PMhart _xcpm_pkg_scope_msrs_ everything seems to work fine. Why? could you post a terminal output to see all data? I mean in a working condition! Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 You mean the bootlog?bootlog.txt Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 no sysctl -a | grep xcpm Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 8 minutes ago, fabiosun said: no sysctl -a | grep xcpm iMacPro:~ admin$ sysctl -a | grep xcpm machdep.xcpm.mode: 1 machdep.xcpm.hard_plimit_max_100mhz_ratio: 43 machdep.xcpm.hard_plimit_min_100mhz_ratio: 7 machdep.xcpm.soft_plimit_max_100mhz_ratio: 43 machdep.xcpm.soft_plimit_min_100mhz_ratio: 7 machdep.xcpm.tuib_plimit_max_100mhz_ratio: 43 machdep.xcpm.tuib_plimit_min_100mhz_ratio: 7 machdep.xcpm.tuib_enabled: 0 machdep.xcpm.power_source: 0 machdep.xcpm.bootplim: 0 machdep.xcpm.bootpst: 43 machdep.xcpm.tuib_ns: 0 machdep.xcpm.vectors_loaded_count: 1 machdep.xcpm.ratio_change_ratelimit_ns: 500000 machdep.xcpm.ratio_changes_total: 39900 machdep.xcpm.maxbusdelay: 4294967295 machdep.xcpm.maxintdelay: 0 machdep.xcpm.mid_applications: 0 machdep.xcpm.mid_relaxations: 0 machdep.xcpm.mid_mode: 1 machdep.xcpm.mid_cst_control_limit: 0 machdep.xcpm.mid_mode_active: 0 machdep.xcpm.mbd_mode: 1 machdep.xcpm.mbd_applications: 455 machdep.xcpm.mbd_relaxations: 455 machdep.xcpm.forced_idle_ratio: 100 machdep.xcpm.forced_idle_period: 30000000 machdep.xcpm.deep_idle_log: 0 machdep.xcpm.qos_txfr: 1 machdep.xcpm.deep_idle_count: 0 machdep.xcpm.deep_idle_last_stats: n/a machdep.xcpm.deep_idle_total_stats: n/a machdep.xcpm.cpu_thermal_level: 0 machdep.xcpm.gpu_thermal_level: 0 machdep.xcpm.io_thermal_level: 0 machdep.xcpm.io_control_engages: 0 machdep.xcpm.io_control_disengages: 0 machdep.xcpm.io_filtered_reads: 0 machdep.xcpm.io_cst_control_enabled: 0 machdep.xcpm.ring_boost_enabled: 0 machdep.xcpm.io_epp_boost_enabled: 0 machdep.xcpm.epp_override: 0 iMacPro:~ admin$ Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 perfect... same config.plist? if so..maybe your motherboard needs of that scope patch :)ends of the story :))))) Link to comment Share on other sites More sharing options...
hardcorehenry Posted April 24, 2019 Share Posted April 24, 2019 4 minutes ago, obus said: iMacPro:~ admin$ sysctl -a | grep xcpm machdep.xcpm.mode: 1 machdep.xcpm.hard_plimit_max_100mhz_ratio: 43 machdep.xcpm.hard_plimit_min_100mhz_ratio: 7 machdep.xcpm.soft_plimit_max_100mhz_ratio: 43 machdep.xcpm.soft_plimit_min_100mhz_ratio: 7 machdep.xcpm.tuib_plimit_max_100mhz_ratio: 43 machdep.xcpm.tuib_plimit_min_100mhz_ratio: 7 machdep.xcpm.tuib_enabled: 0 machdep.xcpm.power_source: 0 machdep.xcpm.bootplim: 0 machdep.xcpm.bootpst: 43 machdep.xcpm.tuib_ns: 0 machdep.xcpm.vectors_loaded_count: 1 machdep.xcpm.ratio_change_ratelimit_ns: 500000 machdep.xcpm.ratio_changes_total: 39900 machdep.xcpm.maxbusdelay: 4294967295 machdep.xcpm.maxintdelay: 0 machdep.xcpm.mid_applications: 0 machdep.xcpm.mid_relaxations: 0 machdep.xcpm.mid_mode: 1 machdep.xcpm.mid_cst_control_limit: 0 machdep.xcpm.mid_mode_active: 0 machdep.xcpm.mbd_mode: 1 machdep.xcpm.mbd_applications: 455 machdep.xcpm.mbd_relaxations: 455 machdep.xcpm.forced_idle_ratio: 100 machdep.xcpm.forced_idle_period: 30000000 machdep.xcpm.deep_idle_log: 0 machdep.xcpm.qos_txfr: 1 machdep.xcpm.deep_idle_count: 0 machdep.xcpm.deep_idle_last_stats: n/a machdep.xcpm.deep_idle_total_stats: n/a machdep.xcpm.cpu_thermal_level: 0 machdep.xcpm.gpu_thermal_level: 0 machdep.xcpm.io_thermal_level: 0 machdep.xcpm.io_control_engages: 0 machdep.xcpm.io_control_disengages: 0 machdep.xcpm.io_filtered_reads: 0 machdep.xcpm.io_cst_control_enabled: 0 machdep.xcpm.ring_boost_enabled: 0 machdep.xcpm.io_epp_boost_enabled: 0 machdep.xcpm.epp_override: 0 iMacPro:~ admin$ Something changed, how's your frequencies? Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 (edited) 22 minutes ago, fabiosun said: perfect... same config.plist? if so..maybe your motherboard needs of that scope patch :)ends of the story :))))) No! I removed SSDT "CpuPm" from ACPI patched. And Used FakeCPUID 0x0506E4 and PMhart:s _xcpm_pkg_scope_msrs_ and unchecked SSDT and SSDT-1 in drop tables 21 minutes ago, hardcorehenry said: Something changed, how's your frequencies? We have a working rig with FV and PM with PMhart:s _xcpm_pkg_scope_msrs_ patch together with FakeCPUID 0x0506E4. Last login: Wed Apr 24 20:09:49 on ttys000 iMacPro:~ admin$ sudo cat /tmp/AppleIntelInfo.dat Password: AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved. Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0xc20b8f96574 (533 MHz) MWAIT C-States...........................: 8224 Processor Brandstring....................: Intel(R) Xeon(R) W-2175 CPU @ 2.50GHz Processor Signature..................... : 0x50654 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 4 - Model................................ : 0x55 (85) Model Specific Registers (MSRs) ------------------------------------------ MSR_IA32_PLATFORM_ID.............(0x17) : 0x4000000000000 ------------------------------------------ - Processor Flags...................... : 1 MSR_CORE_THREAD_COUNT............(0x35) : 0xE001C ------------------------------------------ - Core Count........................... : 14 - Thread Count......................... : 28 MSR_PLATFORM_INFO................(0xCE) : 0x70A2CF3811900 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x19 (2500 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 0 (LMP not supported) - Number of ConfigTDP Levels........... : 2 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 10 - Minimum Operating Ratio.............. : 7 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x7E000008 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 0 (not enabled) - CFG Lock............................. : 0 (MSR not locked) - C3 State Auto Demotion............... : 1 (enabled) - C1 State Auto Demotion............... : 1 (enabled) - C3 State Undemotion.................. : 1 (enabled) - C1 State Undemotion.................. : 1 (enabled) - Package C-State Auto Demotion........ : 1 (enabled) - Package C-State Undemotion........... : 1 (enabled) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x11814 ------------------------------------------ - LVL_2 Base Address................... : 0x1814 - C-state Range........................ : 1 (C-States not included, I/O MWAIT redirection not enabled) IA32_MPERF.......................(0xE7) : 0x93935BA59 IA32_APERF.......................(0xE8) : 0x58B7084DB MSR_FLEX_RATIO...................(0x194) : 0x0 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x153A00000A00 ------------------------------------------ - Current Performance State Value...... : 0xA00 (1000 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0xA00 ------------------------------------------ - Target performance State Value....... : 0xA00 (1000 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x883D0800 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 1 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 61 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x5B0A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 91 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x403040 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) - SpeedShift Technology Enable......... : 1 (enabled) - SpeedShift Interrupt Coordination.... : 0 (disabled) - SpeedShift Energy Efficient Perf..... : 1 (enabled) - SpeedShift Technology Setup for HWP.. : Yes (setup for HWP) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2B2B2B2B2B2B2B2B ------------------------------------------ - Maximum Ratio Limit for C01.......... : 2B (4300 MHz) - Maximum Ratio Limit for C02.......... : 2B (4300 MHz) - Maximum Ratio Limit for C03.......... : 2B (4300 MHz) - Maximum Ratio Limit for C04.......... : 2B (4300 MHz) - Maximum Ratio Limit for C05.......... : 2B (4300 MHz) - Maximum Ratio Limit for C06.......... : 2B (4300 MHz) - Maximum Ratio Limit for C07.......... : 2B (4300 MHz) - Maximum Ratio Limit for C08.......... : 2B (4300 MHz) MSR_TURBO_RATIO_LIMIT1...........(0x1AE) : 0x1C18140E0C080402 ------------------------------------------ - Maximum Ratio Limit for C09.......... : 2 (200 MHz) - Maximum Ratio Limit for C10.......... : 4 (400 MHz) - Maximum Ratio Limit for C11.......... : 8 (800 MHz) - Maximum Ratio Limit for C12.......... : C (1200 MHz) - Maximum Ratio Limit for C13.......... : E (1400 MHz) - Maximum Ratio Limit for C14.......... : 14 (2000 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x292C005B ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x15854000148460 ------------------------------------------ - Package Power Limit #1............... : 140 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 0 (disabled) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 168 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 10 (2560 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x11C474BF ------------------------------------------ - Total Energy Consumed................ : 18193 Joules (Watt = Joules / seconds) MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x19 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x11409A000120460 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x11409A000120460 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xEA492119FF MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xEA492119FF MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x10B2D168585 IA32_TSC_DEADLINE................(0x6E0) : 0xC20BD4D9F36 IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled) IA32_HWP_CAPABILITIES............(0x771) : 0x70A192B ----------------------------------------- - Highest Performance.................. : 43 - Guaranteed Performance............... : 25 - Most Efficient Performance........... : 10 - Lowest Performance................... : 7 IA32_HWP_REQUEST_PKG.............(0x772) : 0x8000FF00 ----------------------------------------- - Minimum Performance.................. : 0 - Maximum Performance.................. : 255 - Desired Performance.................. : 0 - Energy Efficient Performance......... : 128 - Activity Window...................... : 0, 0 IA32_HWP_REQUEST................(0x774) : 0x8000FF00 ----------------------------------------- - Minimum Performance................. : 0 - Maximum Performance................. : 255 - Desired Performance................. : 0 - Energy Efficient Performance........ : 128 - Activity Window..................... : 0, 0 - Package Control..................... : 0 IA32_HWP_STATUS..................(0x777) : 0x0 ----------------------------------------- - Guaranteed Performance Change....... : 0 (has not occured) - Excursion To Minimum................ : 0 (has not occured) CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 10 (1000 MHz) Maximum non-Turbo Ratio/Frequency........: 25 (2500 MHz) Maximum Turbo Ratio/Frequency............: 43 (4300 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ (10) 15 ] CPU C6-Cores [ 3 4 6 8 11 12 14 17 18 20 22 26 ] CPU P-States [ (10) 15 ] CPU C6-Cores [ 0 2 3 4 6 8 10 11 12 14 16 17 18 20 21 22 24 26 ] CPU C6-Cores [ 0 2 3 4 5 6 8 10 11 12 14 16 17 18 20 21 22 24 26 ] CPU C6-Cores [ 0 2 3 4 5 6 7 8 10 11 12 14 16 17 18 20 21 22 24 25 26 ] CPU C6-Cores [ 0 2 3 4 5 6 7 8 10 11 12 14 16 17 18 19 20 21 22 24 25 26 27 ] CPU P-States [ (10) 13 15 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 10 11 12 14 16 17 18 19 20 21 22 24 25 26 27 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 10 11 12 14 16 17 18 19 20 21 22 23 24 25 26 27 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 10 11 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 ] CPU P-States [ 10 13 15 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 ] CPU P-States [ 10 13 15 (28) ] CPU P-States [ 10 13 (14) 15 28 ] CPU P-States [ 10 13 14 15 28 (43) ] CPU P-States [ 10 13 14 15 28 (30) 43 ] CPU P-States [ 10 (11) 13 14 15 28 30 43 ] CPU P-States [ 10 11 (12) 13 14 15 28 30 43 ] CPU P-States [ 10 11 12 13 14 15 (20) 28 30 43 ] CPU P-States [ 10 11 12 13 14 15 20 28 30 (31) 43 ] CPU P-States [ 10 11 12 13 14 15 (16) 20 28 30 31 43 ] CPU P-States [ 10 11 12 13 14 15 16 20 28 30 31 (35) 43 ] CPU P-States [ 10 11 12 13 14 15 16 20 (22) 28 30 31 35 43 ] CPU P-States [ 10 11 12 13 14 15 16 20 22 28 30 31 35 (41) 43 ] CPU P-States [ 10 11 12 13 14 15 16 20 22 28 30 31 35 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 20 22 28 30 31 35 (40) 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 20 22 (26) 28 30 31 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 20 22 26 28 30 31 (33) 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 20 22 26 28 30 31 (33) 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 19 20 22 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 18 19 20 22 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 18 19 20 22 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 18 19 20 22 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 18 19 20 22 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 17 18 19 20 22 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 17 18 19 20 22 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 17 18 19 20 21 22 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 17 18 19 20 21 22 24 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 17 18 19 20 21 22 24 (26) 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 17 18 19 20 21 22 24 (25) 26 28 30 31 33 35 40 41 43 ] CPU P-States [ 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 (26) 27 28 30 31 33 35 40 41 43 ] iMacPro:~ admin$ Edited April 24, 2019 by obus Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 24 minutes ago, fabiosun said: if so..maybe your motherboard needs of that scope patch :)ends of the story :))))) Hi @fabiosun you have this conversation with Pike two years ago. https://github.com/Piker-Alpha/ssdtPRGen.sh/issues/261 "Pike, Is it available a reboot fix patch for Sierra (GM) as the one you created for El Capitan 10.11.6? Many people uses boot strap patch or idle patch that inhibit XCPM start..." Could this be an option for bootstrap? Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 Yes i used reboot fix patch and fakecpuid in that era but my Cpu was of an unknown type for a real Mac Link to comment Share on other sites More sharing options...
obus Posted April 24, 2019 Author Share Posted April 24, 2019 1 minute ago, fabiosun said: Yes i used reboot fix patch and fakecpuid in that era but my Cpu was of an unknown type for a real Mac So you used this patch to get XCPM to load. Is that right? Link to comment Share on other sites More sharing options...
Guest Posted April 24, 2019 Share Posted April 24, 2019 Reboot fix patch in my case helped for msr locked and fakecpuid helped for xcpm i have to use both ti boot Link to comment Share on other sites More sharing options...
Recommended Posts