Andrey1970 Posted November 4, 2019 Share Posted November 4, 2019 13 hours ago, viktr said: PPl, need assistance, pls help. I have 8580 barebone with UHD620 and cannot get it working with weg following this guide. I have clover with 1.3.4 debug weg and 1.3.9 lilu. bootargs are: <key>Arguments</key> <string>-v -wegdbg -liludbg</string> Configuration is: <key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>#device-id</key> <data> AAAbWQ== </data> <key>#hda-gfx</key> <string>onboard-1</string> <key>AAPL,ig-platform-id</key> <data> AAAWWQ== </data> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> </dict> </dict> But nothing happened: 2019-11-03 14:39:07.039817+0200 localhost kernel[0]: (kernel) Lilu: api @ (DBG) got load request from WhateverGreen (134) 2019-11-03 14:39:07.041338+0200 localhost kernel[0]: (kernel) WhateverGreen: init @ (DBG) WhateverGreen bootstrap DBG-134-2019-10-30 2019-11-03 14:39:07.043022+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableDrmdmaPowerGating 2019-11-03 14:39:07.053337+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableGfxCGPowerGating 2019-11-03 14:39:07.054993+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableUVDPowerGating 2019-11-03 14:39:07.056604+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableVCEPowerGating 2019-11-03 14:39:07.058214+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableDynamicGfxMGPowerGating 2019-11-03 14:39:07.060029+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableGmcPowerGating 2019-11-03 14:39:07.061641+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableAcpPowerGating 2019-11-03 14:39:07.063252+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableSAMUPowerGating 2019-11-03 14:39:07.074233+0200 localhost kernel[0]: (kernel) WhateverGreen: shiki @ (DBG) will autodetect autodetect GPU 0 whitelist 0 2019-11-03 14:39:07.075958+0200 localhost kernel[0]: (kernel) WhateverGreen: shiki @ (DBG) pre-config: online 0, bgra 0, compat 0, whitelist 0, id 0, stream 0 2019-11-03 14:39:33.608256+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead16 IGPU 0x00001000 at off 0x02, result = 0x5917 2019-11-03 14:39:33.609065+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5917 value 2019-11-03 14:39:33.609264+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 IGPU 0x00001000 at off 0x00, result = 0x59178086 2019-11-03 14:39:33.609438+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5917 value 2019-11-03 14:39:33.609618+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 reported 0x59178086 instead of 0x59178086 What did I miss? Trying to make it working for a week or two but with no success. Pls help. Read a manual: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md UHD620 0x5917 not native, use 0x5916 Delete # in device-id and set 16590000 <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data> AAAWWQ== </data> <key>device-id</key> <data> FlkAAA== </data> </dict> 1 Link to comment Share on other sites More sharing options...
viktr Posted November 4, 2019 Share Posted November 4, 2019 20 hours ago, Andrey1970 said: Read a manual: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md UHD620 0x5917 not native, use 0x5916 Delete # in device-id and set 16590000 <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data> AAAWWQ== </data> <key>device-id</key> <data> FlkAAA== </data> </dict> I read this manual every day for last 2 weeks lol ))) Man, thank you so much! I could swear this is the first thing I tried, got no 4k and no transparency with it, and began to try other options then. There's even my first config with these 2 options only left! And it was not working! It's probably you influenced so, I bet it afraid of you! Now I returned to this config and everything works just fine! Except sleep - screen is still black on wake, will try to find why. Thank you once more, I cannot explain how it could happen ))) Нет, серьезно, как такое может быть???? Пипец. Спасибо огромное! Link to comment Share on other sites More sharing options...
viktr Posted November 5, 2019 Share Posted November 5, 2019 (edited) On 11/4/2019 at 4:57 AM, Andrey1970 said: Read a manual: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md UHD620 0x5917 not native, use 0x5916 Delete # in device-id and set 16590000 Have it working now thanks to the two simple settings you suggested, but still have black screen on wake. Could you point me what to read about that? So far I found some guidelines, tried to follow but with no success: <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>#AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>#AAPL,slot-name</key> <string>Internal@0,2,0</string> <key>#enable-lspcon-support</key> <data> AQAAAA== </data> <key>#framebuffer-con1-preferred-lspcon-mode</key> <data> AQAAAA== </data> <key>#framebuffer-con2-alldata</key> <data> AgQKAAAIAACPAQAA </data> <key>#framebuffer-con2-has-lspcon</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> AAAbWQ== </data> <key>device-id</key> <data> FlkAAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con1-enable</key> <data> AQAAAA== </data> <key>framebuffer-con1-pipe</key> <data> EgAAAA== </data> <key>framebuffer-con1-type</key> <data> AAgAAA== </data> <key>framebuffer-con2-enable</key> <data> AAAAAA== </data> <key>hda-gfx</key> <string>onboard-1</string> </dict> lspcon was not found, so I commented it out: 2019-11-05 06:12:42.924666+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) SC: GetDPCDInfo() DInfo: Start to configure the LSPCON adapter. 2019-11-05 06:12:42.924672+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) SC: fbSetupLSPCON() DInfo: [FB1] called with controller at 0xffffff805c7750 00 and framebuffer at 0xffffff8356cc5000. 2019-11-05 06:12:42.924677+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) SC: fbSetupLSPCON() DInfo: [FB1] No LSPCON chip associated with this frameb uffer. 2019-11-05 06:12:42.924680+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) SC: GetDPCDInfo() DInfo: Finished configuring the LSPCON adapter. 2019-11-05 06:12:42.924683+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) SC: GetDPCDInfo() DInfo: Will call the original method. 2019-11-05 06:12:42.931106+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) SC: GetDPCDInfo() DInfo: Returns 0x0. According to the ioreg and weg log, there are: unknown connector 0, hdmi connector 1 and dp connector 2. There's also connector 3, dunno what is it: 2019-11-05 06:59:56.088241+0200 localhost kernel[0]: (kernel) Lilu: api @ (DBG) got load request from WhateverGreen (134) 2019-11-05 06:59:56.089763+0200 localhost kernel[0]: (kernel) WhateverGreen: init @ (DBG) WhateverGreen bootstrap DBG-134-2019-10-30 2019-11-05 06:59:56.091450+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableDrmdmaPowerGating 2019-11-05 06:59:56.093130+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableGfxCGPowerGating 2019-11-05 06:59:56.105111+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableUVDPowerGating 2019-11-05 06:59:56.106724+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableVCEPowerGating 2019-11-05 06:59:56.108336+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableDynamicGfxMGPowerGating 2019-11-05 06:59:56.110150+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableGmcPowerGating 2019-11-05 06:59:56.111761+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableAcpPowerGating 2019-11-05 06:59:56.113373+0200 localhost kernel[0]: (kernel) WhateverGreen: rad @ (DBG) not enabling CAIL_DisableSAMUPowerGating 2019-11-05 06:59:56.124550+0200 localhost kernel[0]: (kernel) WhateverGreen: shiki @ (DBG) will autodetect autodetect GPU 0 whitelist 0 2019-11-05 06:59:56.126278+0200 localhost kernel[0]: (kernel) WhateverGreen: shiki @ (DBG) pre-config: online 0, bgra 0, compat 0, whitelist 0, id 0, stream 0 2019-11-05 07:00:17.873057+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) platform is snb 0 and list 0xFFFFFF7F9F0FCD10 2019-11-05 07:00:21.946698+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) found GuC accel config at 0xFFFFFF7F9E7D539E 2019-11-05 07:00:22.022803+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 IGPU 0x00001000 at off 0x02, result = 0x59178086 2019-11-05 07:00:22.024402+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5916 value 2019-11-05 07:00:22.024605+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 reported 0x59168086 instead of 0x59178086 2019-11-05 07:00:22.036360+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 IGPU 0x00001000 at off 0x00, result = 0x59178086 2019-11-05 07:00:22.049061+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5916 value 2019-11-05 07:00:22.049287+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 reported 0x59168086 instead of 0x59178086 2019-11-05 07:00:22.049791+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) applyHdmiAutopatch framebufferId 591B0000 cpugen A 2019-11-05 07:00:22.062286+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) connector [0] busId: 0x00, pipe: 8, type: 0x00000002, flags: 0x00000098 2019-11-05 07:00:22.063065+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) connector [1] busId: 0x05, pipe: 9, type: 0x00000400, flags: 0x00000187 2019-11-05 07:00:22.063472+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) connector [2] busId: 0x04, pipe: 10, type: 0x00000800, flags: 0x00000187 2019-11-05 07:00:22.074807+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) replaced connector 2 type from DP to HDMI 2019-11-05 07:00:22.075246+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) connector [3] busId: 0x00, pipe: 0, type: 0x00000001, flags: 0x00000020 2019-11-05 07:00:22.075441+0200 localhost kernel[0]: (kernel) WhateverGreen: igfx @ (DBG) hdmi patching framebufferId 0x591B0000 successful 2019-11-05 07:00:22.514265+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead16 IGPU 0x00001000 at off 0x02, result = 0x5917 2019-11-05 07:00:22.544118+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5916 value 2019-11-05 07:00:22.544321+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead16 IGPU reported 0x5916 instead of 0x5917 2019-11-05 07:00:22.544529+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 IGPU 0x00001000 at off 0x00, result = 0x59178086 2019-11-05 07:00:22.544910+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5916 value 2019-11-05 07:00:22.545108+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 reported 0x59168086 instead of 0x59178086 2019-11-05 07:02:56.231469+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 IGPU 0x00001000 at off 0x00, result = 0x59178086 2019-11-05 07:02:56.231477+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5916 value 2019-11-05 07:02:56.231482+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 reported 0x59168086 instead of 0x59178086 2019-11-05 07:02:56.231500+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 IGPU 0x00001000 at off 0x00, result = 0x59178086 2019-11-05 07:02:56.231505+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5916 value 2019-11-05 07:02:56.231509+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 reported 0x59168086 instead of 0x59178086 2019-11-05 07:02:57.048497+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 IGPU 0x00001000 at off 0x00, result = 0x59178086 2019-11-05 07:02:57.048511+0200 localhost kernel[0]: (kernel) WhateverGreen: iokit @ (DBG) getOSData device-id has 5916 value 2019-11-05 07:02:57.048518+0200 localhost kernel[0]: (kernel) WhateverGreen: weg @ (DBG) configRead32 reported 0x59168086 instead of 0x59178086 But after wake, screen is black. Everything is working, I can connect remotely but cannot turn display on although I see it in the ioreg, it is exactly the same as after clean boot: Cannot find any further info to read about that. Please help. Edited November 5, 2019 by viktr Link to comment Share on other sites More sharing options...
chummdoggin Posted November 11, 2019 Share Posted November 11, 2019 (edited) Hello. Thanks for all the great work you've done. The first go at using this on an hd4000 laptop it cancelled the built in. Further investigation told to use RM's config section under devices/properties. This fixed the original problem however, the first time the HDMI display worked with HDMI audio and this now does not have it. Maybe you know what I'm missing? Thanks again EDIT : I see what happened the configs injection for port 1 where the HDMI cable plugged in had a pound sign in front that canceled it. The ioreg was showing DP on that port! Thanks again for all the help and good work. debug_30100.zip Edited November 13, 2019 by chummdoggin Link to comment Share on other sites More sharing options...
cyrhex Posted November 18, 2019 Share Posted November 18, 2019 pentium g5400 with working intel quicksync,,thnx headkaze for the tool,vit9696,and and andrey1970,, Link to comment Share on other sites More sharing options...
cyy36 Posted December 3, 2019 Share Posted December 3, 2019 (edited) Hello. Thanks for all the great work you've done. my laptop is dell g7 7590 with 9750h cpu & rtx 2060 egpu internal lcd output corret already patch uefi bios data pre allow memory size to 128k, and video memory to max external video output throught thunderbolt 3 type-c port using type-c to DP cable FHD monitor is correct, but 4k monitor (lg ul600) not signal out. i can confirm that cable is ok(in windows all correct) sorry for my bad english. Maybe you know what I'm missing? Thanks again for all the help and good work. debug_14380.zip Edited December 3, 2019 by cyy36 Link to comment Share on other sites More sharing options...
neoskateur Posted December 4, 2019 Share Posted December 4, 2019 Hello, I have a Acer v3 771G i7 3632QM. I've followed the tuto and read everything...But the HD4000 and the Wifi (AR5B22) doesn't work. I've tryed a lot of things, but no success...Here is my EFI / Runme: https://we.tl/t-2rsPOk2tjPAny help please? Link to comment Share on other sites More sharing options...
stevef Posted December 10, 2019 Share Posted December 10, 2019 (edited) OK I have a weird one which is killing me. Machine is an Asus Chromebox (desktop) i7 8550U, UHD620 16GB Latest Clover, Latest WEG and Lilu Firstly Hackintool does not show me intel Generation in Catalina, which I thought was weird (2.8.7 shows the same). NOTE: The new working Mojave patch shows me Coffeelake shown below. Mojave works 100% with Acceleration + HDMI Audio with the patch below. In Catalina the system hangs on boot at "render compression for IO surface is enabled" if I load with my working Mojave config.plist. Native ID should : 0x59178086 however coffeelake appears to work the best after some trial and error, however loads as Iris Plus Graphics Mojave Working patch below: <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> BAClPg== </data> <key>AAPL,slot-name</key> <string>Internal@0,2,0</string> <key>device-id</key> <data> pT4AAA== </data> <key>device_type</key> <string>VGA compatible controller</string> <key>disable-external-gpu</key> <data> AQAAAA== </data> <key>enable-hdmi-dividers-fix</key> <data> AQAAAA== </data> <key>enable-lspcon-support</key> <data> AQAAAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel UHD Graphics 620</string> </dict> Any assistance would be greatly appreciated I know its close! Edited December 10, 2019 by stevef Link to comment Share on other sites More sharing options...
holyfield Posted December 17, 2019 Share Posted December 17, 2019 Please note that according to Intel documentation for i9-9900K for Intel UHD Graphics 630 device id is 0x3E98. Link to comment Share on other sites More sharing options...
Babiloe Posted December 27, 2019 Share Posted December 27, 2019 (edited) I have msi notebook i7-9750h with uhd630 3e9b 0009 PCI\VEN_8086&DEV_3E9B&SUBSYS_127E1462&REV_02 I use method 1 with Enable Clover DSDT fix AddPNLF. Enable SetIntelBacklight and SetIntelMaxBacklight Works well with backlight keyboard fn left and fn right. however the max backlight is not very light. how to adjust it to more max backlight. Do i have to change id to 0x3EA50009 (A53E on clover device id?) is boot-arg -wegnoegpu changing -nvdisable=1? where i can download gfxutil? what is for? i saw acceleration check app in several post. what is it? where i can download it Edited December 28, 2019 by Babiloe Link to comment Share on other sites More sharing options...
tusharrex Posted January 12, 2020 Share Posted January 12, 2020 Intel HD Graphics 5500/6000 Mojave.[Solved] To enable hd graphics download hackintools and patch display by selecting your card type and model ,generate patches and from menu export as bootloader config.plist file.Then open clover configurator and navigate to devices /properties and add the patch from downloaded config.plist.After go to kext installer and download lilu, weg etc kexts in efi/clover/kext/other folder.Graphics -> insert ig-platform-id and inject intel and change smbios. Restart pc and graphics will work fine. Link to comment Share on other sites More sharing options...
chatelp Posted February 5, 2020 Share Posted February 5, 2020 (edited) Hi all. My DVMT is locked in bios at 32Mb (Thinkpad X250 bios). I’m currently using the same settings for patching as in the example (32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor)), it’s working but I have a few glitches when HiDPI is enabled. Now, I’ve read a few threads on the subject but I don’t yet fully understand the relation between the DVMT, the patches, and how everything is calculated Do you know of any good documentation on the subject? The one at Whatevegreen doesn’t really explain what is « stolen » and « cursor » for instance. Also, does these patches really allow using more than the BIOS allocated DVMT limit ? Or is it more of a way to squeeze the FB in the allocated memory? In the example 19Mb + 9Mb = 28Mb ? Is it 32Mb (allocated) + 28Mb « stolen » now ? Please help ! Edited February 5, 2020 by chatelp Link to comment Share on other sites More sharing options...
headkaze Posted February 15, 2020 Author Share Posted February 15, 2020 I've replaced the first post with links to WEG's Github documentation which is up to date and easier to manage 1 Link to comment Share on other sites More sharing options...
Peanut-Pulp Posted February 16, 2020 Share Posted February 16, 2020 I am running a 4k display (BenQ EW3270U) on a hack-mac using i5 8600k with UHD 630 graphics using an HDMI 2.0 cable. The operating system is macOS 10.14.6 Mojave, the mainboard is a Gigabyte Z370 HD3. Unfortunately, 4k does not work on my device currently the way I've set it up and i am starting to think, that the fix is discussed in this thread. Is that a plausible assumption? I am gonna start playing with this frame buffer stuff. Would you please let me know, what software you use to display/edit your config.plist files? It does not look like clover to me. I'd appreciate that, thank you. Link to comment Share on other sites More sharing options...
PabloLi Posted April 17, 2020 Share Posted April 17, 2020 (edited) Hello! I have i3-10110u Intel Comet Lake-U GT2 8086-9B41 is there special id for this gpu? 3E9B0009 or 3E9B0000 autodetect works fine but no HDMA. Also LVDS and DP (type-с adapter) works only separate - if i try to open or close lid or tutn off external monitor - everithing dissapears( And olso off course no sleep ( [0] busId: 0x00, pipe: 8, type: 0x00000002, flags: 0x00000098 - ConnectorLVDS [1] busId: 0x05, pipe: 9, type: 0x00000400, flags: 0x00000187 - ConnectorDP [2] busId: 0x04, pipe: 10, type: 0x00000400, flags: 0x00000187 - ConnectorDP config.zip Edited April 17, 2020 by PabloLi Link to comment Share on other sites More sharing options...
SavageAUS Posted April 23, 2020 Share Posted April 23, 2020 (edited) Hey guys, New laptop and i'd like to get HDMI out working. I know its connected to my iGPU just need the right config. Any help? Screenshot is with HDMI plugged in. @headkaze any help? Edited April 28, 2020 by SavageAUS Link to comment Share on other sites More sharing options...
and313 Posted April 24, 2020 Share Posted April 24, 2020 im a novice trying to understand it all.. isnt the problem that apple has yet not published the id's for the igpus yet? call me stupid just want to understand more Link to comment Share on other sites More sharing options...
1Ale1 Posted April 24, 2020 Share Posted April 24, 2020 On 4/23/2020 at 7:02 PM, ardentwheel said: Create config.plist according vanilla-laptop-guide Please link the exact guide followed and post ioreg (https://github.com/vulgo/ioregistryexplorer/releases) and screenshots of the SMBIOS in about this Mac, thanks. Link to comment Share on other sites More sharing options...
1Ale1 Posted April 25, 2020 Share Posted April 25, 2020 (edited) On 4/23/2020 at 7:02 PM, ardentwheel said: Create config.plist according vanilla-laptop-guide Did you use the Debug version of OpenCore? Were also all the other kexts compiled to the latest version? Edited April 25, 2020 by 1Ale1 Link to comment Share on other sites More sharing options...
1Ale1 Posted April 25, 2020 Share Posted April 25, 2020 (edited) On 4/23/2020 at 7:02 PM, ardentwheel said: Create config.plist according vanilla-laptop-guide Sorry, by checking your config.plist seems like your platforminfo section is not in conformity with the SMBIOS you posted on the picture of "About this Mac" <key>PlatformInfo</key> <dict> <key>Automatic</key> <true/> <key>Generic</key> <dict> <key>AdviseWindows</key> <false/> <key>MLB</key> <string>M0000000000000001</string> <key>ROM</key> <data>ESIzRFVm</data> <key>SpoofVendor</key> <true/> <key>SystemProductName</key> <string>iMac19,1</string> <key>SystemSerialNumber</key> <string>W00000000001</string> <key>SystemUUID</key> <string>00000000-0000-0000-0000-000000000000</string> </dict> <key>UpdateDataHub</key> <true/> <key>UpdateNVRAM</key> <true/> <key>UpdateSMBIOS</key> <true/> <key>UpdateSMBIOSMode</key> <string>Create</string> </dict> Edited April 25, 2020 by 1Ale1 Link to comment Share on other sites More sharing options...
1Ale1 Posted April 27, 2020 Share Posted April 27, 2020 BUMP! @ardentwheel Link to comment Share on other sites More sharing options...
makk Posted April 29, 2020 Share Posted April 29, 2020 it works on this Asus K53E BBR5 I bought about 10 years ago with macOS Sierra 10.12.6. trying to understand the layouts when time permits. Takes a lot of hours and days. Prior to understanding what Whatevergreen.kext has, -had to patch using many methods which took along time to comprehend, mixing and matching. Really! Lots of hacking. But with everyones help and all the community out there, was able to run this hack. the "CPU unsupported" during boot shows up 3x when installed and running 10.13.6. -screen locks and have to reboot. went back to 10.12.6 Sierra- even under Sierra after long duration would lock up. Since all of these are relatively new to me, VirualSMC.kext, Lily.kext, AppleALC.kext, RTCMemoryFix.kext. SMCBatteryManager.kext, I would like to find the right source of information that is not too hard to comprehend? Where would all these be talked about? Thank you Link to comment Share on other sites More sharing options...
joevt Posted May 8, 2020 Share Posted May 8, 2020 0x158 "172.8 MHz CD" is the minimum valid value for "CD Frequency Decimal" of "CDCLK_CTL" but Apple expects one of the two maximum values - 0x50e "648 MHz CD" or 0x518 "652.8 MHz CD". Link to comment Share on other sites More sharing options...
1Ale1 Posted May 8, 2020 Share Posted May 8, 2020 2 hours ago, joevt said: 0x158 "172.8 MHz CD" is the minimum valid value for "CD Frequency Decimal" of "CDCLK_CTL" but Apple expects one of the two maximum values - 0x50e "648 MHz CD" or 0x518 "652.8 MHz CD". What do you mean? Link to comment Share on other sites More sharing options...
Jasper Levi Posted May 8, 2020 Share Posted May 8, 2020 I have a hackintosh with iMac 19,1 SMBIOS and i9 9900K with headless iGPU set up AMD Radeon RX5700XT I added the igfxfw=2 boot argument to my OpenCore 0.5.8, and sure enough, it boosted my iGPU performance to almost twice, but I don't see the kernel: (AppleIntelCFLGraphics) [IGPU] Graphics Firmware Version: 2.14.0.0 kernel: (AppleIntelCFLGraphics) [IGPU] Graphics Firmware Version: 2.14.0.0 kernel: (AppleIntelCFLGraphics) [IGPU] Graphics accelerator is using scheduler: Apple Firmware kernel: (AppleIntelCFLGraphics) [IGPU] Graphics accelerator is using scheduler: Apple Firmware Instead, what I see is kernel: (AppleIntelKBLGraphics) [IGPU] Graphics Firmware Version: 2.14.0.0 kernel: (AppleIntelKBLGraphics) [IGPU] Graphics Firmware Version: 2.14.0.0 kernel: (AppleIntelKBLGraphics) [IGPU] Graphics accelerator is using scheduler: Apple Firmware kernel: (AppleIntelKBLGraphics) [IGPU] Graphics accelerator is using scheduler: Apple Firmware Does only the Kabylake accelerator kext load currently, or is there something I can do to change things to where the Coffee Lake accelerator kext loads up? Link to comment Share on other sites More sharing options...
Recommended Posts