Jump to content

[pre-release] macOS Mojave


2,429 posts in this topic

Recommended Posts

yes my old Hacki MSI P55 with old GeForce 9500 GT have full QE/CI !!

 

Many hard works Hours and Much good support from macrumors in the unsupported Macs section. everything is now running well with full graphics support in Mojave Beta2.

  • Like 2
Link to comment
Share on other sites

3 hours ago, Badruzeus said:

Except diff. between "g" and "h" letter, any other changes on this build? Thanks.

Screen Shot 2018-07-12 at 15.20.44.png

 

Hi

 

Where I can find this Plist files? Please. I want to verify new beta 3 french dist.

Link to comment
Share on other sites

On 7/12/2018 at 11:37 PM, ANONIMNIQ said:

Guys, is there any way telemetry plugin to be patched with terminal directly from usb installer or recovery?

 

1. Put it in /usr/bin/ as /usr/bin/mojave2core
2. Clover boot to single user mode with -s

 

Terminal command:

 

3. /sbin/mount -uw /
4. mojave2core

 

Q5-mojave2core/mojave2core

 

 

Edited by crazybirdy
  • Like 4
  • Thanks 1
Link to comment
Share on other sites

 
Good to know, here is the same too.:wallbash:
I'm still getting some weird glitches too mainly with icons just being a transparent box on beta 3 with Intel hd4400.

Sent from my SM-G930F using Tapatalk

  • Like 1
Link to comment
Share on other sites

Let me retry with my HD6770 'cause I failed the first time... I want to try the same method as for my HD4830.

 

The big deal it is to be sure that your needed kexts are in the kext cache. For that, boot in  single user mode in first, give permissions for your kexts (chmod + chown bla bla), load them (kextload -v), then rebuild prelinked kernel (kextcache system-prelinked-kernel), then reboot.

 

Now do your patch on the fly (boot with no_cache, patch your kexts [amd4800controller.kext and atiradeonx2000.kext in my case], check debug option) and it should be good.

 

For my HD4830, the binary patch (atiradeonx2000.kext) is the same as for HS... take a look. ;)

  • Like 2
Link to comment
Share on other sites

5 hours ago, fantomas1 said:

Let me retry with my HD6770 'cause I failed the first time... I want to try the same method as for my HD4830.

 

Unfortunately I did not be able to make my HD6770 work as well :( - I've tried in any way I know (manually Device-ID adding, Clover's patch on the fly, Clover's FakeID, kexts from HS, even from Sierra) but nada.  :(

 

I guess there's one or more other kexts in need to rollback from HS or Sierra, I do not know.  :(  I'll let it for the moment like it is right now (full QE/CI with HD4830) and maybe I'll (re)give a try later.  

 

EDIT:

 

I didn't try with a DSDT injection but as Clover's FakeID does the same thing (and it does not work), I am doubtful.  :unsure:

Link to comment
Share on other sites

9 minutes ago, fantomas1 said:

 

Unfortunately I did not be able to make my HD6770 work as well :( - I've tried in any way I know (manually Device-ID adding, Clover's patch on the fly, Clover's FakeID, kexts from HS, even from Sierra) but nada.  :(

 

I guess there's one or more other kexts in need to rollback from HS or Sierra, I do not know.  :(  I'll let it for the moment like it is right now (full QE/CI with HD4830) and maybe I'll (re)give a try later.  

 

EDIT:

 

I didn't try with a DSDT injection but as Clover's FakeID does the same thing (and it does not work), I am doubtful.  :unsure:

which kexts did you add the device id to?

Link to comment
Share on other sites

Just now, fantomas1 said:

Just in AMD5000Controller.kext & AMDRadeonX3000.kext, just what I need for my HD6770

On High Sierra I needed to add the device ID to AMDLegacySupport.kext as well as those other kexts for my AMD 6790 to work, try adding it to AMDLegacySupport.kext as well and see if that works.

  • Thanks 1
Link to comment
Share on other sites

Of course, I can try it but in my case, to make my HD6770 work on HS, I have to rollback kexts from Sierra to prevent black screen. And no, Clover's RadeonDeInit didn't help. And even like that, only Clover's FakeID worked, nothing else.  :(

Link to comment
Share on other sites

15 minutes ago, fantomas1 said:

Of course, I can try it but in my case, to make my HD6770 work on HS, I have to rollback kexts from Sierra to prevent black screen. And no, Clover's RadeonDeInit didn't help. And even like that, only Clover's FakeID worked, nothing else.  :(

I hope adding the device ID to AMDLegacySupport works. I'm not sure though but if you take look at these posts that we had in another topic you can see I how I made mine work without rolling back and kexts from Sierra in order to get it to work on High Sierra, but sadly Mojave is totally another story for me on my E8400 rig.

I tried to install it but I get the black screen as you mentioned and neither the WEG nor the RadeonDeInit helped.

I used my AMD 7790 which has native support but still I get the black screen.

 

Off-Topic: (But I guess this could be useful)

Yesterday I found out that the DSDT that I've been using on my C2D rig was the cause for the black screen on High Sierra, it worked well on Mavericks up to Sierra but for some reason High Sierra wasn't able to initialize the GPU correctly while I used that DSDT, so I removed it and then I was able to boot into desktop without any issues.

So you can also give it a try and hopefully you can get it to work.

 

Sorry! I forgot to add the link: :hysterical: Here it is

https://www.insanelymac.com/forum/topic/305450-amd-radeon-6790-hd-mavericksyosemite-graphics-acceleration/?tab=comments#comment-2614109

 

Edited by Cyberdevs
  • Thanks 1
Link to comment
Share on other sites

13 minutes ago, Cyberdevs said:

I hope adding the device ID to AMDLegacySupport works

 

Unfortunately it didn't work. In fact my HD6770 is just a HD5770 rebranded so it does not even need more Device-ID injections that it needs (FakeID is plenty enough).  The same for my HD4830. Thanks anyway. ;)

  • Like 1
Link to comment
Share on other sites

You got 7790 on c2d working on HS without roll back?
Can you help me get r7 250x(hd7770) on my 775 rig?

I hope adding the device ID to AMDLegacySupport works. I'm not sure though but if you take look at these posts that we had in another topic you can see I how I made mine work without rolling back and kexts from Sierra in order to get it to work on High Sierra, but sadly Mojave is totally another story for me on my E8400 rig.
I tried to install it but I get the black screen as you mentioned and neither the WEG nor the RadeonDeInit helped.
I used my AMD 7790 which has native support but still I get the black screen.
 
Off-Topic: (But I guess this could be useful)
Yesterday I found out that the DSDT that I've been using on my C2D rig was the cause for the black screen on High Sierra, it worked well on Mavericks up to Sierra but for some reason High Sierra wasn't able to initialize the GPU correctly while I used that DSDT, so I removed it and then I was able to boot into desktop without any issues.
So you can also give it a try and hopefully you can get it to work.
 
Sorry! I forgot to add the link: :hysterical: Here it is
https://www.insanelymac.com/forum/topic/305450-amd-radeon-6790-hd-mavericksyosemite-graphics-acceleration/?tab=comments#comment-2614109
 


Sent from my OnePlus 2 using Tapatalk

Link to comment
Share on other sites

Just now, LuCyr04 said:

You got 7790 on c2d working on HS without roll back?
Can you help me get r7 250x(hd7770) on my 775 rig?

 

Yup, It's working on HS but no luck on Mojave yet.

I can try to help you get it working on your rig but if I'm not mistaking we tried that once and it didn't work right? You created your own topic for that card correct?

If I'm correct let's just move there and continue this conversation in your own topic, just mention me in your post and I'll be there. ;)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...