Jump to content

[pre-release] macOS Mojave


2,429 posts in this topic

Recommended Posts

On 6/25/2018 at 9:06 AM, Badruzeus said:

 

Just another way to get a full macOS Mojave Beta 2 installer from Apple Server that we can do from all mac versions. DWYOR.

 

Base on this way from swcdn.apple.com.

We can download it, and automatically extract it as a full installer app as App Store.

And as I check, the md5 of dmg is the same as downloaded full app from App Store.

 

All right! I agree that, I'm too boring to make this installScipt.:hysterical:

 

 

Mojave MBR HFS Firmware Check Patch/Q6-DownloadFullApp/installScript_1014fullapp

 

installScript_1014fullapp.thumb.png.2b70d7d129afedf49555e22f49ac326c.png

Edited by crazybirdy
  • Like 5
  • Thanks 3
Link to comment
Share on other sites

33 minutes ago, crazybirdy said:

 

Base on this way from swcdn.apple.com.

We can download it, and automatically extract it as a full installer app as App Store.

And as I check, the md5 of dmg is the same as downloaded full app from App Store.

 

All right! I agree that, I'm too boring to make this installScipt.:hysterical:

 

installScript_1014fullapp.zip

 

installScript_1014fullapp.thumb.png.2b70d7d129afedf49555e22f49ac326c.png

You're literally a crazy bird! I've been waiting for this script for a long time! I'll try on my Lenovo :hysterical:...

Edited by Fergarth
  • Haha 3
Link to comment
Share on other sites

1 hour ago, crazybirdy said:

Base on this way from swcdn.apple.com.

We can download it, and automatically extract it as a full installer app as App Store.

And as I check, the md5 of dmg is the same as downloaded full app from App Store.

 

All right! I agree that, I'm too boring to make this installScipt.:hysterical:

 

installScript_1014fullapp.zip

 

...

Thanks.. Updated #LoL

  • Like 1
Link to comment
Share on other sites

On 6/25/2018 at 9:16 PM, arsradu said:

 

Config -> System Parameters -> Inject Kexts -> YES (instead of Detect). Could you please, try that?

Sometimes it returns, maybe related to the headphone is plug-in or not while boot?

 

Edited by Trung_Nguyen
Link to comment
Share on other sites

8 hours ago, Trung_Nguyen said:

Sometimes it returns, maybe related to the headphone is plug-in or not while boot?

 

 

I don't think that's related. But...could be related to the headphones themselves. Or the port. You can try other headphones in the same port. And you can try the same headphones in another port. If you're using front panel audio, try the ports on the back of the motherboard.

Edited by arsradu
Link to comment
Share on other sites

10 minutes ago, SavageAUS said:

Mojave has update?

Sent from my SM-G930F using Tapatalk
 

 

Not for developers. 18A314k is the first Public Beta build. And...unfortunately, has pretty much the same bugs as Developer Beta 2.

  • Like 2
Link to comment
Share on other sites

6 hours ago, arsradu said:

 

I don't think that's related. But...could be related to the headphones themselves. Or the port. You can try other headphones in the same port. And you can try the same headphones in another port. If you're using front panel audio, try the ports on the back of the motherboard.

unrelated. I can't even reproduce it. Maybe it just a random failure could be fixed by a restart

Edited by Trung_Nguyen
Link to comment
Share on other sites

3 minutes ago, Trung_Nguyen said:

non-related. I can't even reproduce it. Maybe it just a random failure could be fixed by a restart

 

Yes. I also encountered sudden loss of sound, with no apparent reason. No Sleep mode, no nothing. Just...no sound. Could be an issue with AppleALC. And indeed, it's usually fixed by a simple restart. So if that's what you're encountering, you're not the only one. I haven't had this issue on my MBP, so I'm thinking this is most likely not an issue with Mojave in general, but a hack issue.

Edited by arsradu
Link to comment
Share on other sites

I need your help with Mojave 10.14 beta2 installation to my PC-1 in my Signature.
Booting with Clover 4577 as far as ok switches also graphical user interface then comes language

selection and then the error "Installation resources expired" bla bla bla and just I should restart.
I already googled but didn't find much to do with it.
I find the hints to reload installer from Appstore nonsense.
Note Set time in bios to GMT I have made, but the same error afterwards.
Do you have an idea? nvram.plist not exist and emuvariable not installed with clover.

how can I execute this command with the SSD for Mojave installation? i did use the method

thru the terminal sudo ntpdate -u "time.apple.com" and it worked

Thanks for tips

Edited by pinarek
Link to comment
Share on other sites

Hi guys,

 

For anyone having issues with Quick Look and Preview for larger jpegs using the dedicated GPU, here's a trick that might work for you:

1. Set bios to use PEG (dedicated GPU).

2. Reboot (I think you don't necessarily need to boot into the OS...but you do need to reboot at least until Clover UI)

3. Reboot back into BIOS and set it from PEG to IGD (integrated graphics) WITHOUT removing the cable.

4. Reboot again.

The result should be that the OS is tricked into thinking you're booting with the IGPU when in fact you're using the dedicated GPU. :)))

 

You will also need to patch the iGPU from Clover config.

1. Graphics -> Inject Intel (UNCHECK Inject Nvidia or ATI if it's checked).

2. ig-platform-id (in my case for Intel HD 4600 Desktop) it was: 0x0d220003

 

And use IntelGraphicsFixup.kext in Clover/kexts/Other. In my particular case, without the kext, I would get freezes in Safari.

 

Worked with both HDMI and DVI, in my case.

Edited by arsradu
  • Like 2
Link to comment
Share on other sites

2 hours ago, pinarek said:

I need your help with Mojave 10.14 beta2 installation to my PC-1 in my Signature.
Booting with Clover 4577 as far as ok switches also graphical user interface then comes language

selection and then the error "Installation resources expired" bla bla bla and just I should restart.
I already googled but didn't find much to do with it.
I find the hints to reload installer from Appstore nonsense.
Note Set time in bios to GMT I have made, but the same error afterwards.
Do you have an idea? nvram.plist not exist and emuvariable not installed with clover.

how can I execute this command with the SSD for Mojave installation? i did use the method

thru the terminal sudo ntpdate -u "time.apple.com" and it worked

Thanks for tips

Just to make sure have you tried re downloading it from the AppStore?

Maybe the installer got corrupted in the process of downloading it?

Link to comment
Share on other sites

1 minute ago, Cyberdevs said:

I havne't, What does it do exactly?

Not sure, I’m out of town on business trip so internet here is spotty that’s why I was asking if anyone has tried it to see what it actually does.

Link to comment
Share on other sites

1 minute ago, Cyberdevs said:

I havne't, What does it do exactly?

 

I suppose it's for the web installer Mojave seems to be using when you're already on Mojave....and it probably should download the rest of the installer files when creating the boot drive so you can have everything in one place.

 

At least that's what I'm thinking it should do.

 

Trying it now.

Link to comment
Share on other sites

I get this:

jimmy$ sudo /Applications/Install\ macOS\ Mojave\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --nointeraction --downloadassets
Password:
/Applications/Install macOS Mojave Beta.app does not appear to be a valid OS installer application.
jimmy$ 

 

Edited by arsradu
Link to comment
Share on other sites

11 minutes ago, arsradu said:

I get this:


jimmy$ sudo /Applications/Install\ macOS\ Mojave\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --nointeraction --downloadassets
Password:
/Applications/Install macOS Mojave Beta.app does not appear to be a valid OS installer application.
jimmy$ 

 

Works on my end and now it's downloading something:

Spoiler

 

iMac:~ cyberdevs$ sudo /Applications/Install\ macOS\ Mojave\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction --downloadassets

Password:

Erasing disk: 0%... 10%... 20%... 30%... 100%

Finding assets to download...

Downloading assets: 0%...10%...

 

 

It's downloading the following files:

/Library/Installation/DownloadCache/091-62778/BridgeOSBrain.pkg

/Library/Installation/DownloadCache/091-62778/BridgeOSUpdateCustomer

/Library/Installation/DownloadCache/091-62776/BridgeOSBrain.pkg

/Library/Installation/DownloadCache/091-62776/BridgeOSUpdateCustomer

 

Screen Shot 2018-06-28 at 1.23.42 AM.png

Screen Shot 2018-06-28 at 1.23.50 AM.png

Edited by Cyberdevs
  • Like 1
Link to comment
Share on other sites

I now have the MBR patch (the new one for Beta2) Progress made.

 

When running 14MBRinstallerMaker no kernel was installed in the S/L/Kernels/Kernels (15,8MB) I copied it manually or purely from: InstallESD.dmg/Packages/Core.pkg/System/Library/Kernels/kernel.

 

Then I ran the tool Disk2UUIDmodify again because something was wrong with UUID 222-222-22xxxx. The tool has then entered the correct UUID in the.IA file and in the minstallconfig.xml.

 

Then SSD as the only SSD connected booted, ran smoothly then, then and immediately came the 2nd stage of installation on Disk2InstallData partition WITH NO errors with install resource time expired etc. 

 

Then a new start and the usual setup and the desktop was already set up.

 

Sound doesn't work yet, think that the AppleALC 2.8.1 still has to be in S/L/E. At the moment it is only in Clover/kext/other and inject is active and port is like before in High Sierra 1, but this can be done later. Anyway full success with Mojave 10.14 Beta2

 

Many thanks to the developers here and special thanks to my Romanian friend @arsradu.

  • Like 2
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...