[pre-release] macOS Mojave

[Trung_Nguyen]

I lost the audio input since updating to beta2, the built-in microphone still lives in b1 with the new applealc 1.2.8v2 built by someone on this thread earlier, but now everything gone

I'm using IDT92HD93BXX(layout-id 12)

[arsradu]

42 minutes ago, Trung_Nguyen said:

I lost the audio input since updating to beta2, the built-in microphone still lives in b1 with the new applealc 1.2.8v2 built by someone on this thread earlier, but now everything gone

I'm using IDT92HD93BXX(layout-id 12)

 

Could you, please, upload your Clover folder for analysis? Once fixed, you should not have any issues with it. Unless you've changed something else in the meantime.

 

So, let's see.

Also, don't forget to clean your config.plist SMBIOS/RT variables of of any serials. We're not interested in that.

Edited June 24, 2018 by arsradu

[arsradu]

Hi guys,

If you want Mojave Beta 2 full installer, one way to get it (if not the only way so far) is using HS Beta. If you try to download it directly from Mojave, you'll get the 12.7 MB (at least that's what it was in my case) web installer. Which...works perfectly fine. I had no issues with it. But it might be trickier to get that to work with an USB drive.

 

Aand...apparently, my HD 4600 works in full 2k resolution using IntelGraphicsFixup and the usual Inject Intel + ig-platform-id in Clover config. That is awesome.

Edited June 24, 2018 by arsradu

[Fergarth]

In X-99 everything ok with the MJ b1 and b2! But in my Lenovo Skylake (in the signature) and always stable up to 13.6 betas ... neither with MJ beta 1 or 2 with the last SkyLake kest patch and last Clover, I can move! Starts the upgrage, reboots as if everything is fine and then, a little past gives me KP. I think without being sure, that may have to do with the HD. Tomorrow I will clone the HD for an SSD and test again ... any suggestion that seems useful, I thank you! 

[Cyberdevs]

21 minutes ago, arsradu said:

Hi guys,

If you want Mojave Beta 2 full installer, once way to get it (if not the only way so far) is using HS Beta. If you try to download it directly from Mojave, you'll get the 12.7 MB (at least that's what it was in my case) web installer. Which...works perfectly fine. I had no issues with it. But it might be trickier to get that to work with an USB drive.

 

Aand...apparently, my HD 4600 works in full 2k resolution using IntelGraphicsFixup and the usual Inject Intel + ig-platform-id in Clover config. That is awesome.

Did it solve the QuickLook issue?

 

[arsradu]

51 minutes ago, Cyberdevs said:

Did it solve the QuickLook issue?

Yes, it did.  

Edited June 24, 2018 by arsradu

[Cyberdevs]

41 minutes ago, arsradu said:

Yes  

Perfect! Congrats!

Edited June 24, 2018 by Cyberdevs

[Badruzeus]

7 hours ago, arsradu said:

Hi guys,

If you want Mojave Beta 2 full installer, one way to get it (if not the only way so far) is using HS Beta. If you try to download it directly from Mojave, you'll get the 12.7 MB (at least that's what it was in my case) web installer. Which...works perfectly fine. I had no issues with it. But it might be trickier to get that to work with an USB drive.

 

Just another way to get a full macOS Mojave Beta 2 installer from Apple Server that we can do from all mac versions. DWYOR.

[nmano]

On 6/22/2018 at 3:04 AM, crazybirdy said:

 

What does this mean?

need to add CPU feature flags for ssse3, sse4.2, and popcnt to avoid Illegal Instruction crashes

 

1. CPU feature flags for ssse3, sse4.2

2. popcnt

to avoid Illegal Instruction crashes in the graphics subsystem

 

Do we have chance to work with 775 E8400 cpu without SSE4.2 support?

Mojave installs the same way as High Sierra. The only difference is that Mojave now requires
CPU instructions that were introduced with Nehalem, so you will need to add CPU feature
flags for ssse3, sse4.2, and popcnt to avoid Illegal Instruction crashes in the graphics
subsystem after boot is complete (causing the top menu bar to flash on and off, and Finder
to crash on open).

Tested with Clover 4542.

 

https://github.com/kholia/OSX-KVM

[Irish_Man]

10 hours ago, arsradu said:

Hi guys,

If you want Mojave Beta 2 full installer, one way to get it (if not the only way so far) is using HS Beta. If you try to download it directly from Mojave, you'll get the 12.7 MB (at least that's what it was in my case) web installer. Which...works perfectly fine. I had no issues with it. But it might be trickier to get that to work with an USB drive.

 

Aand...apparently, my HD 4600 works in full 2k resolution using IntelGraphicsFixup and the usual Inject Intel + ig-platform-id in Clover config. That is awesome.

I guess this fix doesn't work for my build? I have no problem with mp4 files, .jpg is the issue. 

[arsradu]

1 hour ago, dzontra said:

I guess this fix doesn't work for my build? I have no problem with mp4 files, .jpg is the issue. 

Should work exactly the same way for your build.

 

Clover Config -> Graphics section -> Inject Intel checked (UNCHECK Inject Nvidia/ATI if you had it checked) and add ig-platform-id 0x0d220003

Clover/kexts/Other -> Download and add IntelGraphicsFixup from here.

 

No need for FakeID. But I think you will need a digital connector (DVI/HDMI, no VGA). 

Edited June 25, 2018 by arsradu

[zeus2000]

@arsradu
I also have hd 4600 and all ok except the sound for hdmi .... greetings

[arsradu]

6 minutes ago, zeus2000 said:

@arsradu
I also have hd 4600 and all ok except the sound for hdmi .... greetings

 

Hola! Not sure about HDMI sound... I'm using analog sound, and that one works. But if you're using AppleALC.kext, try to post a question in the AppleALC thread here.

[Irish_Man]

2 hours ago, arsradu said:

Should work exactly the same way for your build.

 

Clover Config -> Graphics section -> Inject Intel checked (UNCHECK Inject Nvidia/ATI if you had it checked) and add ig-platform-id 0x0d220003

Clover/kexts/Other -> Download and add IntelGraphicsFixup from here.

 

No need for FakeID. But I think you will need a digital connector (DVI/HDMI, no VGA). 

Thank you very much for trying but it didn't work . I'm using HDMI btw.

Tried with inject Intel/ATI also but no luck. Rebuild cache. Nothing worked.

I can quicklook small .jpg files only but when I try with normal size picture I get loading circle and after that can't open any format.

If I try to open it in Preview app I get "not responding" in Act.Monitor app so I have to force quit the app.

Other apps like ColorSync Utility and Grab app can open .jpg with no issue.

[arsradu]

1 minute ago, dzontra said:

Thank you very much for trying but it didn't work . I'm using HDMI btw.

Tried with inject Intel/ATI also but no luck. Rebuild cache. Nothing worked.

I can quicklook small .jpg files only but when I try with normal size picture I get loading circle and after that can't open any format.

If I try to open it in Preview app I get "not responding" in Act.Monitor app so I have to force quit the app.

Other apps like ColorSync Utility and Grab app can open .jpg with no issue.

 

Same exact behavior here with my GTX 650.

Until yesterday, as a workaround, I was using Grab to open jpg files.

 

Anyway, please, remove any serials from SMBIOS and RT Variables and upload your Clover folder for analysis. If you're using HD 4600...it should work. With HDMI (and it could be my cable...), it works, full resolution both in pre-boot, and in the OS (due to IntelGraphicsFixup kext), but the screen flashes pink when initialising second stage boot, and also, flashes white randomly throughout the OS. I'm currently using DVI. But...you might get different/better results over HDMI. Maybe it's just my cable.

 

Also, if your purpose is to get Intel Graphics to work, Inject Nvidia or Inject ATI should be UNCHECKED.  

Anyway, let's take a look at your Clover folder.

[Irish_Man]

7 minutes ago, arsradu said:

 

Same exact behavior here with my GTX 650.

Until yesterday, as a workaround, I was using Grab to open jpg files.

 

Anyway, please, remove any serials from SMBIOS and RT Variables and upload your Clover folder for analysis. If you're using HD 4600...it should work. With HDMI (and it could be my cable...), it works, full resolution both in pre-boot, and in the OS (due to IntelGraphicsFixup kext), but the screen flashes pink when initialising second stage boot, and also, flashes white randomly throughout the OS. I'm currently using DVI. But...you might get different/better results over HDMI. Maybe it's just my cable.

 

Also, if your purpose is to get Intel Graphics to work, Inject Nvidia or Inject ATI should be UNCHECKED.  

Anyway, let's take a look at your Clover folder.

 

thank you, here is my EFI folder

 

https://app.box.com/s/j3k1h9e5m4vakffa4p3zgsvbrasd7tvd

[arsradu]

1 hour ago, dzontra said:

 

thank you, here is my EFI folder

 

Hmm....I wonder if removing your SSDTs from ACPI/Patched will fix the issue. Do you even need a SSDT/DSDT? Cause I don't (and I really doubt that you do). None. All patches (and there are very few needed in the first place) are done through Clover config.

Also, you need to check Inject Intel in Graphics. Right now, it's not.

 

Edited June 25, 2018 by arsradu

[Irish_Man]

 
Hmm....I wonder if removing your SSDTs from ACPI/Patched will fix the issue. Do you even need a SSDT/DSDT? Cause I don't (and I really doubt that you do). None. All patches (and there are very few needed in the first place) are done through Clover config.
Also, you need to check Inject Intel in Graphics. Right now, it's not.
 

I will try that and let you know, tnx


Sent from my iPhone using Tapatalk

[Irish_Man]

17 minutes ago, arsradu said:

 

Hmm....I wonder if removing your SSDTs from ACPI/Patched will fix the issue. Do you even need a SSDT/DSDT? Cause I don't (and I really doubt that you do). None. All patches (and there are very few needed in the first place) are done through Clover config.

Also, you need to check Inject Intel in Graphics. Right now, it's not.

 

 

Removed SSDT's from the folder and checked Inject Intel but. no luck 

 

[arsradu]

1 minute ago, dzontra said:

 

Removed SSDT's from the folder and checked Inject Intel but. no luck 

Could you please, provide more info on the actual issue? What happens exactly?

Also, are you connected via DVI/HDMI?

[Irish_Man]

Just now, arsradu said:

Could you please, provide more info on the actual issue? What happens exactly?

Also, are you connected via DVI/HDMI?

Connected via HDMI.

 

The issue happens when I try to open .jpg file. I can open any file in quicklook/preview.app until I try to open .jpg file. As soon as I try to open .jpg file, quicklook/Preview breaks and can't open anything anymore.

[arsradu]

3 minutes ago, dzontra said:

Connected via HDMI.

 

The issue happens when I try to open .jpg file. I can open any file in quicklook/preview.app until I try to open .jpg file. As soon as I try to open .jpg file, quicklook/Preview breaks and can't open anything anymore.

 

Uhm...sorry for the (probably stupid) question. But are you connected to the iGPU? Meaning cable connected to the motherboard graphics port, not the dedicated graphics card port.

Edited June 25, 2018 by arsradu

[Irish_Man]

4 minutes ago, arsradu said:

 

Uhm...sorry for the (probably stupid) question. But are you connected to the iGPU?

 

There are no stupid questions, just stupid answers

Yes, connected to iGPU

Everything worked great until I updated to Beta 2

Edited June 25, 2018 by dzontra

[arsradu]

8 minutes ago, dzontra said:

 

There are no stupid questions, just stupid answers

Yes, connected to iGPU

 

Then it beats me.... I have no idea. I mean, you should see at least SOME changes.... Both to the boot, and to the actual issue... Do you have acceleration? Full resolution? Both in Clover GUI and OS? I don't see any reason why it wouldn't work...

 

But maybe you can try what cyberdevs suggested before. And see if that works.

 

Which is to manually remove:

1. com.apple.finder.plist from Library/Preferences

2. com.apple.QuickLookDaemon.plist from the same place

 

3. Kext cache remove (it will be rebuilt on the next reboot). Which you can do using Terminal, and doing:

sudo -s
[password]
rm -R -v /System/Library/Caches/com.apple.kext.caches/Startup/*

 

4. Reboot

5. On Clover GUI, press F11 to reset NVRAM.

 

Let's see if THAT makes any difference. I mean, I'm honestly surprised it made absolutely no difference. It instantly fixed the issue in my case. And it does make the difference even without the patches. As long as you can boot your system and use Apple driver. You don't even need acceleration. It makes no difference in this case.

 

But anyway...let's try this, as well.

Edited June 25, 2018 by arsradu

[Badruzeus]

1 hour ago, dzontra said:

The issue happens when I try to open .jpg file. I can open any file in quicklook/preview.app until I try to open .jpg file. As soon as I try to open .jpg file, quicklook/Preview breaks and can't open anything anymore.

It seems Beta's bug for me, also happened on my mach on prev. macOS 10.13 Beta last year, till Nvidia provided WebDriver update then all went be fine (or wait for Stable release if graphics=Supported Intel/AMD)

 

macOS_10.14_beta_2_18A314h_Release_Notes.pdf

macOS Mojave (10.14) - Bugs and bug fixes

Edited June 25, 2018 by Badruzeus