Jump to content

[pre-release] macOS Mojave


2,429 posts in this topic

Recommended Posts

Guys, can't install Mojave I am getting this verbose error:

 

I create media with TINU and installed latest clover v4558 and add my kexts to other folders.

 

Here is the error;

CrozfYN.jpg

CrozfYN.jpg

 

Edit: I fixed the problem. I forgot to add my DSDT the patched folder. After I added it installer worked and I installed Mojave to my HDD.

Edited by telepati
Link to comment
Share on other sites

1 hour ago, ricoc90 said:

Correct me if I am wrong, but any CPU after Nehalem has SSE4.2, right?

 

  According to Wiki, these instructions were first implemented in the Nehalem-based Intel Core i7 .

Link to comment
Share on other sites

Ok finally I installed Mojave and no sound. I am using AppleALC v1.2.7 without any boot arg but it doesnt work. Should I need boot arg for AppleALC or what can I do for the sound?
Try adding -lilubetaall boot flag.

Sent from my SM-G930F using Tapatalk

Link to comment
Share on other sites

On 6/20/2018 at 6:11 PM, Ricky1994 said:

hi everyboy,the dvmt patch of 10.14PB2 has been changed,now the new patch is here,you can try this if you have hd5500 hd530 520 630 620 etc.

 


pb2


Kabylake

764648FF 05025208
EB4648FF 05025208
skylake

764048FF 0561E907
EB4048FF 0561E907
Brodwell

764048FF 05122B06
EB4048FF 05122B06

 

Hello! For what are those for? How to use them and where are the benefits of using them ?

Link to comment
Share on other sites

Well, I get this info somewhere.. about Mojave on unsupported CPU (though unfortunately, IDK what's he talking about #LoL)

 

Notes

"Mojave installs the same way as High Sierra. The only difference is that Mojave now requires CPU instructions that were introduced with Nehalem, so you will need to add CPU feature flags for ssse3, sse4.2, and popcnt to avoid Illegal Instruction crashes in the graphics subsystem after boot is complete (causing the top menu bar to flash on and off, and Finder to crash on open).

Tested with Clover 4542."

 

Link

  • Like 2
Link to comment
Share on other sites

@DSM2 These are Clover KextsToPatch entries which should work on the Framebuffer kexts of the specific CPU Family. 

 

AppleIntelBDWGraphicsFramebuffer = Broadwell

AppleIntelSKLGraphicsFramebuffer = Skylake

AppleIntelKBLGraphicsFramebuffer = Kabylake

 

Since the DVMT-issue mostly occurs on Laptops, which can't change the DVMT-value in BIOS, these patches might not be used on desktops.

An exception might be those fancy packaged machines from Lenovo, Asus or whatever, with minimised BIOS settings capabilities...

Edited by al6042
  • Like 1
Link to comment
Share on other sites

7 hours ago, telepati said:

Ok finally I installed Mojave and no sound. I am using AppleALC v1.2.7 without any boot arg but it doesnt work. Should I need boot arg for AppleALC or what can I do for the sound?

Use the Alc from earlier in this Thread V1.2.8.v2, that will work again.. use the Flag lilubetaall too.

  • Like 1
Link to comment
Share on other sites

2 hours ago, Badruzeus said:

Well, I get this info somewhere.. about Mojave on unsupported CPU (though unfortunately, IDK what's he talking about #LoL)

 

Notes

"Mojave installs the same way as High Sierra. The only difference is that Mojave now requires CPU instructions that were introduced with Nehalem, so you will need to add CPU feature flags for ssse3, sse4.2, and popcnt to avoid Illegal Instruction crashes in the graphics subsystem after boot is complete (causing the top menu bar to flash on and off, and Finder to crash on open).

Tested with Clover 4542."

 

Link

What is popcnt and what flags we need to use?

Link to comment
Share on other sites

2 hours ago, Badruzeus said:

Well, I get this info somewhere.. about Mojave on unsupported CPU (though unfortunately, IDK what's he talking about #LoL)

 

Notes

"Mojave installs the same way as High Sierra. The only difference is that Mojave now requires CPU instructions that were introduced with Nehalem, so you will need to add CPU feature flags for ssse3, sse4.2, and popcnt to avoid Illegal Instruction crashes in the graphics subsystem after boot is complete (causing the top menu bar to flash on and off, and Finder to crash on open).

Tested with Clover 4542."

 

Link

 

What does this mean?

need to add CPU feature flags for ssse3, sse4.2, and popcnt to avoid Illegal Instruction crashes

 

1. CPU feature flags for ssse3, sse4.2

2. popcnt

to avoid Illegal Instruction crashes in the graphics subsystem

 

Do we have chance to work with 775 E8400 cpu without SSE4.2 support?

  • Like 1
Link to comment
Share on other sites

4 hours ago, crazybirdy said:

 

What does this mean?

need to add CPU feature flags for ssse3, sse4.2, and popcnt to avoid Illegal Instruction crashes

 

1. CPU feature flags for ssse3, sse4.2

2. popcnt

to avoid Illegal Instruction crashes in the graphics subsystem

 

Do we have chance to work with 775 E8400 cpu without SSE4.2 support?

These are points that I really don't understand.. but since this info came from QEMU-KVM, I think it's related to VM.. sorry. :)

Edited by Badruzeus
  • Sad 1
Link to comment
Share on other sites

34 minutes ago, crazybirdy said:

Do we have chance to work with 775 E8400 cpu without SSE4.2 support?

 

I do not know what these notes mean (it looks more like a google translation, IMO) but to answer to your question (I'm also concerned with myE8400), I guess we'll have to wait for 10.14 XNU open source files and take a look on it to see what changed and if we can add the support for pre-Nehalem-based cpu's.

 

On a same note, Sierra (and HS) also requires >= SSE4,1 CPU's support but I think, @Bronya made a patched kernel that does not require these instructions to install Sierra (and HS) on AMD (SSSE3 minimum I think) configs.

 

Sierra kernel testing & release

 

Maybe take a look on that side and ask what/how he did it and try to do the same with 10.14.

 

The only solution for those unsupported cpu's, is a patched kernel, IMO. Otherwise, RIP Core2Duo.  :(

 

High Sierra kernel testing & release

 

EDIT:

 

Give a try with AMD HS patched kernel

  • Like 6
Link to comment
Share on other sites

13 hours ago, telepati said:

Ok finally I installed Mojave and no sound. I am using AppleALC v1.2.7 without any boot arg but it doesnt work. Should I need boot arg for AppleALC or what can I do for the sound?

I used AppleHDA.kext from 10.13.3 and installed it in S/L/E

Link to comment
Share on other sites

14 hours ago, telepati said:

Ok finally I installed Mojave and no sound. I am using AppleALC v1.2.7 without any boot arg but it doesnt work. Should I need boot arg for AppleALC or what can I do for the sound?

Are you using FakePCIID with Intel-HDMI-Audio injector by any chance?

Link to comment
Share on other sites

6 hours ago, mick3lson said:

Someone know if HWMonitor work on Mojave, I'm try to install with sensors in /library/extensions but don't start.

works here without any Problems... see on the settings for SIP. set to 0x67 in Clover. and look to the Extensions to make Prelinked Kernel.

  • Like 1
Link to comment
Share on other sites

11 hours ago, fantomas1 said:

 

I do not know what these notes mean (it looks more like a google translation, IMO) but to answer to your question (I'm also concerned with myE8400), I guess we'll have to wait for 10.14 XNU open source files and take a look on it to see what changed and if we can add the support for pre-Nehalem-based cpu's.

 

On a same note, Sierra (and HS) also requires >= SSE4,1 CPU's support but I think, @Bronya made a patched kernel that does not require these instructions to install Sierra (and HS) on AMD (SSSE3 minimum I think) configs.

 

Sierra kernel testing & release

 

Maybe take a look on that side and ask what/how he did it and try to do the same with 10.14.

 

The only solution for those unsupported cpu's, is a patched kernel, IMO. Otherwise, RIP Core2Duo.  :(

 

High Sierra kernel testing & release

 

EDIT:

 

Give a try with AMD HS patched kernel

How to patched kernel as AMD? I don't like replace kernel

I like clover config kernel patch:)

Need to patched kernel and System.kext 

Edited by nmano
Link to comment
Share on other sites

7 hours ago, mick3lson said:

Someone know if HWMonitor work on Mojave, I'm try to install with sensors in /library/extensions but don't start.

you can install it in /AppleInternal/Library/Extensions

create this folder with correct Permission if not present^_^ 

  • Like 1
Link to comment
Share on other sites

2 hours ago, Sanom4 said:

I still have an issue with quicklook did someone fix that ?

 

I've noticed that when I inject HDMI for RX480 (via ssdt, kext, either method) quicktime stops working... quicklook on mp4 as well. But when not injecting HDMI and not injecting graphics via clover, it works for some weird reason...

Edited by Nightf4ll
Link to comment
Share on other sites

On 6/22/2018 at 1:36 AM, SavageAUS said:

Try adding -lilubetaall boot flag.

Sent from my SM-G930F using Tapatalk
 

 

16 hours ago, Rene204 said:

Use the Alc from earlier in this Thread V1.2.8.v2, that will work again.. use the Flag lilubetaall too.

 

11 hours ago, d5aqoep said:

I used AppleHDA.kext from 10.13.3 and installed it in S/L/E

 

10 hours ago, ellaosx said:

Are you using FakePCIID with Intel-HDMI-Audio injector by any chance?

 

 

Thank you guys for all of your suggestion but, I have a bigger problem more than sound right now. I will try all suggestion but I cant boot right now. My both system. Last night before the close computer everything working normally and I shut down. Today I open my machine clover boot screen coming but I am starting to get the prohibited sign. I thought this just for Mojave disk but when I choose HS drive this is also starting to get same error;

 

Mojave using HDD, High Sierra using NMVE

 

Here is the verbose screen both system it looks same error to me how can I fix that;

 

Mojave Verbose

 

wish1s.jpg

 

High Sierra Verbose

 

33krl2c.jpg

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...