Jump to content

[pre-release] macOS Mojave


2,429 posts in this topic

Recommended Posts

11 hours ago, Fergarth said:

 

Once again, thank you PMheart! I tested but I still have something missing! It has gone from maximum frequency to just idle! ...

Captura de ecrã 2018-06-14, às 00.38.06.png

Captura de ecrã 2018-06-14, às 00.50.58.png

Try other sets of FrequencyVectors. Find one best fits you. ;)

  • Like 1
Link to comment
Share on other sites

17 minutes ago, ricoc90 said:

So, my problem is solved. Apparently the update to 10.13.6 dp 2 left Some dirt behind that interferred with the Mojave install. 

 

I was about to suggest you exactly that. :)) Since it sounded like it's got some "unfinished business". LOL

Glad you got it working, man!

Link to comment
Share on other sites

Thanks SavageAUS, 
I hope so, that this time all works at first try... 
Rome wasn't built in a day. Do a fresh vanilla install with only what's needed to install then tackle one thing at a time slowly from most important to least. Keep track of what you do and any changes you make so you can revert them easily. Backup often when things are working correctly.
The people here are great and supportive, not to mention helpful.

Sent from my SM-G930F using Tapatalk

  • Like 1
Link to comment
Share on other sites

Indeed. Please, do not add ANYTHING related to sound yet. Especially patches. Also, once installed, DO make a copy of your AppleHDA.kext somewhere on your computer.

And, as SavageAUS said (I couldn't have said it any better myself): 

Quote

Keep track of what you do and any changes you make so you can revert them easily. Backup often when things are working correctly.

Perfect.

Link to comment
Share on other sites

Guest ricoc90

Mojave runs fine on my Optiplex 790, however I'm having issues with light mode. The menu bar and other "overlay" items don't have any transparency, they're just plain grey. Anyone else with this issue? The dock and side panel are okay. Nvidia GT 710 with metal support

 

aCykK4s.png

Link to comment
Share on other sites

1 minute ago, ricoc90 said:

Mojave runs fine on my Optiplex 790, however I'm having issues with light mode. The menu bar and other "overlay" items don't have any transparency, they're just plain grey. Anyone else with this issue? The dock and side panel are okay. Nvidia GT 710 with metal support

 

Actually...no... I'm not sure, is the GT 710 supported OOB with Apple's video driver? Do you have acceleration and everything? It's clearly a GPU or driver issue. But no, I can't say I've seen that before.

Link to comment
Share on other sites

I do not know why people want to get me wrong here in any way as I have seen, and talking about order or ROM while we are in the third day of helping the MAN. We all here are for helping, only one person here that said the trick is @In-N-Out, and I started to follow hes thing and reading the IOREG and diskutil and the files that I sent, this helped me the find the problem of @MorenoAv. So I think the solution is here, also he don't need to format the partition but the entire drive as I said, he need to click on that DRIVE and simply click after on format, the screenshot of Pavo already mentioned it. it's simple like that:

 

Erase.png.b110094459dca77911779470abe9d5e7.png

 

Please you tired me to much with that obvious thinking bad about me, start having good thinking before the bad, start understanding before, this is so bad and makes me sick, why just for searching for a help! So bad feeling now. The first started to many run me, and didn't see the trick, and he kicked me by words, the second one came also, and did same thing, and SavageAUS also just kicking by words. So tell me who find that solution starting from the first post until the last, two of us, and you still continue. Yes I feel so sick in my heart now with these words, because I search for a solution?

 

Anyway, I'll say good word, thanks

Link to comment
Share on other sites

Guest ricoc90
1 minute ago, arsradu said:

 

Actually...no... I'm not sure, is the GT 710 supported OOB with Apple's video driver? Do you have acceleration and everything? It's clearly a GPU or driver issue. But no, I can't say I've seen that before.


Yep. It is supported OOB. Everything works normal, other than the mentioned issues

Link to comment
Share on other sites

hi guys don't argue because of me... my problem is really strange, but possibly have a solution, if not I have an perfectly working high Sierra and stick with it... until new betas from Mojave or until final release if needed be... 

All opinions are valid, and the sum of all make great leaps forward...

Edited by MorenoAv
Link to comment
Share on other sites

8 minutes ago, MorenoAv said:

New installation of Mojave, and the saga continues, no sound and no audio devices... with alc 1.2.8 lilu and -lilubetaall flags...

Send me iMac-de-AC.lan.zip

I guess we're working on the old config, right? Cause the new one had other ACPI patches. Anyway...ok, we'll try to work with this one.

 

I'll come back with an update on your config soon. Please, DO NOT touch anything.

 

Link to comment
Share on other sites

26 minutes ago, MorenoAv said:

hi guys don't argue because of me... my problem is really strange, but possibly have a solution, if not I have an perfectly working high Sierra and stick with it... until new betas from Mojave or until final release if needed be... 

All opinions are valid, and the sum of all make great leaps forward...

Replace your config with this one and test. Make a backup of your existing config before replacing it.

Remove any patched DSDT/SSDTs if you use them and test.

 

The IOREG shows the layout-id is set to 0 which is wrong.

config.plist.zip

Edited by Cyberdevs
Link to comment
Share on other sites

New installation of Mojave, and the saga continues, no sound and no audio devices... with alc 1.2.8 lilu and -lilubetaall flags...
Send me iMac-de-AC.lan.zip
But do you have working Ethernet? WiFi? Graphics? Cpu power management?

What are you using now that is the same as before a fresh install? DSDT? Have you tried without it?

Remember one thing at a time from most to least important. Most important is cpu power management, then maybe graphics then internet connectivity then audio.

Sent from my SM-G930F using Tapatalk

Link to comment
Share on other sites

ALC889 and 1150 work perfect for with DSDT patch, all output work normaly. I use last Clover and last Lilu and AppleALC with -lilubeta and -alcbeta.

 

EDIT: All work and with Ozmosis and I prefer Oz.

Edited by crusher.
Link to comment
Share on other sites

Please @MorenoAv, remove my files even if they doesn't did any KP or even if they are working on GIGABYTE 9 SERIES as shown in my signature, and even if the SSDT have only _DSMs that only put the needed thing into the desired device and even if the config have the minimal and even if we have same MANUFACTURER, and even if nothing special like machine poison. 

Link to comment
Share on other sites

At this moment I have working wifi, ethernet, graphics, no cpu power management , I have no dsdt... and is all
Is your cpu maxed out at limit or stuck at idle?
If you can install the intel power gadget it will tell you.

Sent from my SM-G930F using Tapatalk

Link to comment
Share on other sites

ammoune/8 its nothing like that man, I forgot all the files in the ssd an when erased the ssd erased all the files, but they gave me kip's too, don't be mad at me please...

Link to comment
Share on other sites

 

18 minutes ago, MorenoAv said:

Nope I don't touch anything until you came back.

The other one caused too many KP's that I opted to star with my old one... 

 

Ok, as SavageAUS suggested, make a backup of your current config and try the one he posted.

 

I cleaned your config even more than he did, so we can start real fresh.

 

NOW, one thing you should know is that Clover supports booting from specific config.plist. And you can select it in Clover UI.

So, let's say you want to make a backup of your current config and you can't boot with the new one.

Since you renamed your current config let's say config_bkp.plist, Clover will not boot from it by default. But you can still select it at Clover UI Settings!

 

Ooor, you can do it the other way around and keep your config.plist as default, and make your tests with the new config which you can name config2.plist or something. And of course, you will need to select THAT ONE at boot.

 

Now, I cleaned your config and it might look a little bit too clean. But that's ok. We can add everything back one by one. That's not a problem.

 

Anyway, you have my version of your config attached.

config.plist.zip

 

As I said. If KP on boot, then just boot from the other config using Clover's settings. You can select the other config on boot.

Edited by arsradu
Link to comment
Share on other sites

I'll forget all the things because you still have same problem the layout id doesn't get injected, it's 0 in ioreg, while in the config you uploaded is 1. I didn't mean you by removing but other that said SSDT things, because he only he don't prefer them, so don't think bad on me to please, I was pleased by helping you, that's it, but removing things was for other user.

 

That said you still have the same problem for that drive and EFI, I'll leave my words and @In-N-Out to, about that problem.

Link to comment
Share on other sites

38 minutes ago, ricoc90 said:

Mojave runs fine on my Optiplex 790, however I'm having issues with light mode. The menu bar and other "overlay" items don't have any transparency, they're just plain grey. Anyone else with this issue? The dock and side panel are okay. Nvidia GT 710 with metal support

 

aCykK4s.png

I have same problem HD7770

Link to comment
Share on other sites

50 minutes ago, ricoc90 said:

Mojave runs fine on my Optiplex 790, however I'm having issues with light mode. The menu bar and other "overlay" items don't have any transparency, they're just plain grey. Anyone else with this issue? The dock and side panel are okay. Nvidia GT 710 with metal support

I have the same issue with my RX580 which has full support, once I enabled the Dark Mode and when I reverted back to Light Mode all hell breaks loose, I thinks it's a bug which will be fixed in the next release.

Edited by Cyberdevs
Link to comment
Share on other sites

40 minutes ago, ricoc90 said:


Yep. It is supported OOB. Everything works normal, other than the mentioned issues

I'll give it another try when I get home. Just to be sure. It could also be a bug. Wouldn't be the first one. :) 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...