Jump to content

[pre-release] macOS Mojave


2,429 posts in this topic

Recommended Posts

ok man, I'll do it now and I want you to know that did replace the kexts and put the dsdt's in place correctly, but one more time the things don't load... I don't touch the config.plist that you gave me...

Link to comment
Share on other sites

Just now, MorenoAv said:

ok man, I'll do it now and I want you to know that did replace the kexts and put the dsdt's in place correctly, but one more time the things don't load... I don't touch the config.plist that you gave me...

 

Yes, this confirm that there's one drive that have another EFI installed on it. This is why i told you to remove them, but for config and kext it's just to confirm that we aren't doing something that will create interference or confusion. Not bad, just checking ^_^

Link to comment
Share on other sites

6 minutes ago, MorenoAv said:

that was the usb installer, now the only drive connected is the Mojave nothing else...

As you could see...

Diskutil list.rtf

 

Please remove the sata cable from the High Sierra drive, then boot, and open efi partition and then check that the files are there. We will work on Mojave drive first, please.

This damn autocorrection make mistake sometimes

Edited by ammoune78
Link to comment
Share on other sites

2 hours ago, PMheart said:

Hi,

 

Looks like the patch applied to _xcpm_bootstrap is missing from your config. That might be why you are lacking of XCPM at all. By the way, do you need to disable that many registers? I guess you may only need to disable xcpm_pkg_scope_msrs. Oh, if you have locked 0xE2, then xcpm _idle_wrmsr patch should also be reserved. (Disable it if you do not)

Attached my modified config, FYI.

 

config.plist.zip

 

50 minutes ago, Fergarth said:

Thank you dear PMheart! I will test and I already report! And yes I have the Bios unlocked!

Once again, thank you PMheart! I tested but I still have something missing! It has gone from maximum frequency to just idle! ...

Captura de ecrã 2018-06-14, às 00.38.06.png

Captura de ecrã 2018-06-14, às 00.50.58.png

Edited by Fergarth
Link to comment
Share on other sites

3 minutes ago, MorenoAv said:

Already is removed the high Sierra are small partitions in Mojave ssd...

 

The files that we are working on are in the EFI of the Mojave SSD? If yes remove also the USB and reboot, and post IOREG with diskutil list

Link to comment
Share on other sites

4 hours ago, Carpentryplus25 said:

it is now apart of the Assets.car file within that same directory. You will need to find a way to extract the archived file and modify it then re archive it with a .car extension. I tried a few tools like cartoon and Asset Catalog Tinkerer with no success seems they haven't been updated to Mojave yet. You may have better luck in High Sierra with those apps. I didn't have time to try. You can see it here.

 

 

4 hours ago, Mc Jacej said:

utilities/systeminformation/show package contents/resources assets.car

 

 

Thanks.

HowTo edit .car with ThemeEngine + Photoshop.

/Applications/Utilities/System Information.app/Contents/Resources/Assets.car

done.

 

ok01.thumb.gif.1c73490e0f778f532d03a0f774c02963.gifok02.thumb.gif.fbd7198371566b90daca802085b8481b.gif

Edited by crazybirdy
  • Like 3
  • Thanks 1
Link to comment
Share on other sites

11 hours ago, crazybirdy said:

 

Where to change the SystemLogo?

 

01.gif.d557a1d2e18b65abad856a16829d1a47.gif

The location of the image: "Utilities/System Information.app/show package contents/resources/Assets.car

Inside the .car file you have 2 image files, SystemLogo@2x.png (512x512) and SystemLogo@1x.png (256x256)

To open the file and change the the image you need special tool and basic photoshop skills. 

If you want to, you can send me the Asset.car file, the image you want to be shown and I'll do it as soon as I can.

 

 

 

screen1.png

Edited by dzontra
  • Like 3
Link to comment
Share on other sites

6 minutes ago, MorenoAv said:

Here are the files...

iMac de AC.zip

diskutil list.rtf

 

My MAN, you have one SSD that have Mojave, High Sierra and Windows as I have seen. If I'm not wrong or saying mistake, the windows efi partition have clover on it and the ESP also have it.

I do not know if you can do that, but you will have to format the entire SSD, this will be the real clean install. Because another time the patches doesn't take effect. This ssd have to be formatted from the start to the end.

Link to comment
Share on other sites

The problem is that I can't erase that damn partitions. In disk utility that tiny partitions are greyed out with an * and I can't erase them... I tried time and time again... 

 

Edited by MorenoAv
Link to comment
Share on other sites

and how we inject HDEF properly ellaosx?

But that is an subject for tomorrow, or for latter, that in here are 01:43 AM

Until tomorrow or latter to all...

And thanks

Edited by MorenoAv
Link to comment
Share on other sites

17 minutes ago, MorenoAv said:

The problem is that I can't erase that damn partitions. In disk utility that tiny partitions are greyed out with an * and I can't erase them... I tried time and time again... 

 

 

2 minutes ago, ellaosx said:

The main problem of MorenoAV is the HDEF injection, that is why the Devices under System Profiler>Audio is empty.

AppleALC has nothing to do with it yet untill HDEF is injected properly. No layout # can fix this too.

 

If you want to know what I'm talking about, just look at the config plist I've uploaded, then compare it with the two Jorge dumps. The efi partition aren't loaded at all. look again on the diskutil list, you'll find that he have 3 oss installed on one drive, the things are not properly working.

 

Boot into the USB, to do that, simply go to the bios settings click on boot override from that USB, once on installer screen, use disk utility and select the entire drive not partitions select the drive name, it will have SSD on it, format it  and install again, install on another partition that you can create High Sierra, and in the last step, you can create another partition to install windows on it

Link to comment
Share on other sites

37 minutes ago, MorenoAv said:

The problem is that I can't erase that damn partitions. In disk utility that tiny partitions are greyed out with an * and I can't erase them... I tried time and time again... 

 

eject/umount target
diskutil apfs deleteContainer disk#
Link to comment
Share on other sites

38 minutes ago, MorenoAv said:

and how we inject HDEF properly ellaosx?

But that is an subject for tomorrow, or for latter, that in here are 01:43 AM

Until tomorrow or latter to all...

And thanks

Boot from installer USB, booting into the Install MacOS and use Disk Utility, when in Disk Utility, click View all devices and select the disk and not the partitions, click erase.

T65PcHi.png

bGMKcjS.png

  • Like 2
Link to comment
Share on other sites

7 hours ago, ammoune78 said:

 

ok, I have switched Cards, and disabled Nvidia Injection. now I have no Tearing, but I have no Acceleration or second monitor.  I am going to go out on a limb and say that they have not completed the Nvidia Kernel acceleration features in Beta 1.

 

took one more shot at it and have Basic Acceleration with 10.13.5 Web Drivers!!!

Untitled.png.bdb51eef1fb31979dc363375e7a303ca.png

 

1408807790_Untitled2.png.aac4c26b7672cde1695cdd39c4722b79.png

 

 

got it running and saw that it will run well on my system, time to wait for the next Beta release and see if it has better driver support.

 

a BIG thanks to everyone who has helped with this project. :thumbsup_anim::stretcher::robot::thanks_speechbubble:

HBP 

Edited by HBP
  • Like 1
Link to comment
Share on other sites

5 hours ago, Fergarth said:

 

Once again, thank you PMheart! I tested but I still have something missing! It has gone from maximum frequency to just idle! ...

Captura de ecrã 2018-06-14, às 00.38.06.png

Captura de ecrã 2018-06-14, às 00.50.58.png

try this its work well

https://www.insanelymac.com/forum/topic/334308-pre-release-macos-mojave/?do=findComment&comment=2619094

  • Like 1
Link to comment
Share on other sites

 

Guys, sorry, but I can't work like this. I can't start something, in an organised fashion, with a minimalistic config so we can debug it easily, and then have someone else mess with everything again. Nothing good will come from chaos.

 

I'm done here. Wish you good luck.

 

I just wanna say one thing: sound works PERFECTLY on ALC892 using AppleALC kext, in Mojave. Apple didn't drop support for anything. This is a setup issue. And it's probably caused by messing with AppleHDA, custom SSDTs and config.

 

If you wanna do it this way, you'll have to do it alone.

Edited by arsradu
  • Like 1
Link to comment
Share on other sites

 

1 hour ago, arsradu said:

 

Guys, sorry, but I can't work like this. I can't start something, in an organised fashion, with a minimalistic config so we can debug it easily, and then have someone else mess with everything again. Nothing good will come from chaos.

 

I'm done here. Wish you good luck.

 

I just wanna say one thing: sound works PERFECTLY on ALC892 using AppleALC kext, in Mojave. Apple didn't drop support for anything. This is a setup issue. And it's probably caused by messing with AppleHDA, custom SSDTs and config.

 

If you wanna do it this way, you'll have to do it alone.

 

You need to shill first sorry,

 

You have to look at the previous post when I said to him to try all the layout-ids from the config plist you made, no one worked, waiting your comment, you wasn't here, so I said to him to do a backup of that efi, then tried other things. don't be like that, but you have to read the entire steps until the last, to know what is he's problem.

 

The last thing that i can say, ALC887 didn't worked for me also, I just come back from the testing of my desktop, and no I confirm that it doesn't worked for me also. Maybe I'm doing something wrong, but i'll test with clover today, but even with your config it doesn't worked, and patches from config also doesn't worked, this mean that efi partition of that Mojave doesn't get loaded at all, just to let you understand.

 

But now look here:

 

On 6/13/2018 at 12:24 AM, In-N-Out said:

Ok guys, excuse me since I haven't been closely following MorenoAv's plight with getting his video going but I'd like to ask him a question. MorenoAv, do you by any chance have multiple EFI partitions on your system? If so, is it possible you're applying this edits to the wrong one? Sorry if this info has already been confirmed etc... Sometimes it is the most obvious things that we over look. 

 

After that, take a look at the ioreg, the diskutil list, you'll know really what's the problem. 

 

I was tired until I didn't get the good words in the last post, and @Pavo posted the thing I meant, this is why I reacted to he's post, I'm now so tired and I'll go sleep, because breaking my head here and with my board, so my brain was divided into two parts here and there, with too many things.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...