ammoune78 Posted June 11, 2018 Share Posted June 11, 2018 1 hour ago, Pavo said: This is simply not true, they have removed a ton of previously supported devices and also changed how things normally worked with its actual supported devices. Just because it worked in previous macOS versions does not mean it will work with Mojave. Now it works in almost many Unsupported Macs and Hackintoshs including Core2Duo as shown, it only needs some patience and searching for a solution, because solutions exists already, it only depend on what you know and what you don't know yet 3 Link to comment Share on other sites More sharing options...
rob88v Posted June 11, 2018 Share Posted June 11, 2018 Testing Mojave 10.14 on my HP Probook 4540s everything works with the exception of sound at the moment. If anyone has gotten sound to work in Mojave yet I would love to know how to get it going on the laptop for testing. Link to comment Share on other sites More sharing options...
Sherlocks Posted June 11, 2018 Share Posted June 11, 2018 Testing Mojave 10.14 on my HP Probook 4540s everything works with the exception of sound at the moment. If anyone has gotten sound to work in Mojave yet I would love to know how to get it going on the laptop for testing.need to change layout. can you tell me create install media app? where does it get this app? has this app GUI? 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
ammoune78 Posted June 11, 2018 Share Posted June 11, 2018 (edited) 1 hour ago, rob88v said: everything works with the exception of sound at the moment. In the DSDT or the SSDT you use, replace: "layout-id", with "alc-layout-id", Add -alcbeta -lilubetaall into the boot-args and use AppleALC_1.2.8v2.zip this was picked from @arsradu post in AppleALC topic This is if you already use AppleALC kext solution, if you use another solution ignore this comment Edited June 11, 2018 by ammoune78 1 Link to comment Share on other sites More sharing options...
Gigamaxx Posted June 11, 2018 Share Posted June 11, 2018 53 minutes ago, Sherlocks said: need to change layout. can you tell me create install media app? where does it get this app? has this app GUI? 나의 LG-F800S 의 Tapatalk에서 보냄 My HP Probook 640 G1 works with voodoo HDAkext. Link to comment Share on other sites More sharing options...
MattsCreative Posted June 11, 2018 Share Posted June 11, 2018 20 hours ago, surfinchina said: Lucky you. They changed something because my $8000 dollar software no longer works. works here Link to comment Share on other sites More sharing options...
surfinchina Posted June 11, 2018 Share Posted June 11, 2018 59 minutes ago, WarDoc said: works here You tried Archicad? Link to comment Share on other sites More sharing options...
demos41 Posted June 11, 2018 Share Posted June 11, 2018 Hey, I have upgraded my high Sierra to Mojave, although I am unable to boot from drive, have installed clover, but no boot. I can only boot from usb with config origin selected. all functions well except my dual display that has no image. dp. any insights? Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2018 Share Posted June 11, 2018 (edited) 2 hours ago, surfinchina said: You tried Archicad? Works here, as well. I mean, I don't know what exactly are you trying to do...maybe there is a specific scenario in which it doesn't work, but...it does open up fine. Which version did you try? Maybe they already released an update...and all you need is to install it? Would be too easy, I know. :)) But...who knows. Maybe it's stupid little things like these that we don't pay attention to, that cause the biggest troubles. I'm just saying. It's worth double checking. Also, did you make a clean install of Mojave? Also, does ArchiCAD use Java....? If so...is it installed? I'm not sure what you should see in Demo mode... Never used this software before. Looks like a pretty graphics intensive one (which makes perfect sense considering its purpose). But anyway, as I said, it does open up just fine. Edited June 11, 2018 by arsradu Link to comment Share on other sites More sharing options...
daleski75 Posted June 11, 2018 Share Posted June 11, 2018 On 6/8/2018 at 9:59 AM, arsradu said: Using the iGPU or the eGPU? Did you manage to get Nvidia driver working in Mojave...? Also, I'm not sure, but I don't think "borked" means working fine.... So...are you confirming it working or not working for you, too? Cause I'm confused. Preview is working fine for me and not tried to get the nvidia drivers working yet as the HD530 is perfectly adequate for the meantime. Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2018 Share Posted June 11, 2018 Preview is working fine for me and not tried to get the nvidia drivers working yet as the HD530 is perfectly adequate for the meantime.Yeah. Well, that’s the thing. It works fine with the iGPU. I tried it myself and yeah, works fine like that. But it doesn’t work (at least not for most of the people) using the dedicated GPU.Anyway, thanks a lot for your feedback. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Nightf4ll Posted June 11, 2018 Share Posted June 11, 2018 Cant wake from sleep and cant switch App Store to US (from my local version)... rest seems to work. Link to comment Share on other sites More sharing options...
SavageAUS Posted June 11, 2018 Share Posted June 11, 2018 Testing Mojave 10.14 on my HP Probook 4540s everything works with the exception of sound at the moment. If anyone has gotten sound to work in Mojave yet I would love to know how to get it going on the laptop for testing.What is and where did you get the create install media app?Sent from my SM-G930F using Tapatalk Link to comment Share on other sites More sharing options...
surfinchina Posted June 11, 2018 Share Posted June 11, 2018 (edited) 1 hour ago, arsradu said: Works here, as well. I mean, I don't know what exactly are you trying to do...maybe there is a specific scenario in which it doesn't work, but...it does open up fine. Which version did you try? Maybe they already released an update...and all you need is to install it? Would be too easy, I know. :)) But...who knows. Maybe it's stupid little things like these that we don't pay attention to, that cause the biggest troubles. I'm just saying. It's worth double checking. Also, did you make a clean install of Mojave? Also, does ArchiCAD use Java....? If so...is it installed? I'm not sure what you should see in Demo mode... Never used this software before. Looks like a pretty graphics intensive one (which makes perfect sense considering its purpose). But anyway, as I said, it does open up just fine. Hey thanks for taking the time to load it!! Yeah it opens fine for me too but trying to actually draw a wall or anything results in endless spinning wheels. I've just wiped my mojave and did a fresh install on a formatted SSD then a fresh install of Archicad (the latest version), but still bad. I'll double check the java. Thanks again man, I appreciate your help. edit: Java is installed and seems ok. Hard to say if it's working fine or not I'm not really bothered and I'm sure it'll get fixed. I'll put the mojave desktop on the HS for now and probably not even notice it's not Mojave haha. Edited June 11, 2018 by surfinchina Link to comment Share on other sites More sharing options...
demos41 Posted June 11, 2018 Share Posted June 11, 2018 (edited) clover 4515 in first topic does not boot my disk, any way to make ssd bootable?, can only good from pen used to have apple file in my clover, not anymore? can't even mount volume Mojave is on Edited June 11, 2018 by demos41 Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2018 Share Posted June 11, 2018 (edited) 26 minutes ago, surfinchina said: Hey thanks for taking the time to load it!! Yeah it opens fine for me too but trying to actually draw a wall or anything results in endless spinning wheels. I've just wiped my mojave and did a fresh install on a formatted SSD then a fresh install of Archicad (the latest version), but still bad. I'll double check the java. Thanks again man, I appreciate your help. edit: Java is installed and seems ok. Hard to say if it's working fine or not I'm not really bothered and I'm sure it'll get fixed. I'll put the mojave desktop on the HS for now and probably not even notice it's not Mojave haha. It's actually the same for me with Adobe Lightroom. It's not endless spinning wheel. But it is very, very slow. Doing anything, moving any slider is laggy. And it is kind of annoying to use. It makes actually getting some work done pretty hard and frustrating. But hey, I didn't expect it to run smoothly from the very beginning.:)) And especially on a BETA. :))) So, yeah, I'm pretty happy that it actually runs. And, as I said before, and as the actual OS warns about (at least in my case), some apps are not yet optimised. This will most likely be fixed in the future. Glad I could help! Took a while to download and install that software (at least on my rig). :))) I'm glad it wasn't for nothing. Edited June 11, 2018 by arsradu 1 Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2018 Share Posted June 11, 2018 (edited) 46 minutes ago, SavageAUS said: What is and where did you get the create install media app? Sent from my SM-G930F using Tapatalk Createinstallmedia is not an app. It's a component of the MacOS installer found in /Content/Resources/. And it is used to create USB installation media (such as a bootable USB drive). Download the MacOS 10.14 app from the App Store. Open up Terminal, and do this: sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled This assumes that your USB drive is called Untitled, which is the default name. If that's not the case for you, make sure you adjust the name in the command above. That should create a USB drive for you. You can use the Clover installation of your HDD/SSD if you already have Clover installed. Or, you can try to install Clover on the actual USB driver, to make that one bootable, as well. Though I had issues with this method in the past (it's probably been fixed since then, but anyway). So I usually prefer to keep my USB installers intact, and use the Clover installation on my SSD to boot it. It will use that for future reboots anyway, after copying the installation files to the HDD/SSD. Edited June 11, 2018 by arsradu Link to comment Share on other sites More sharing options...
SavageAUS Posted June 11, 2018 Share Posted June 11, 2018 (edited) 3 minutes ago, arsradu said: Createinstallmedia is not an app. It's a component of the MacOS installer. And it is used to create USB installation media (such as a bootable USB drive). Download the MacOS 10.14 app from the App Store. Open up Terminal, and do this: sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled This assumes that your USB drive is called Untitled, which is the default name. If that's not the case for you, make sure you adjust the name in the command above. That should create a USB drive for you. You can use the Clover installation of your HDD/SSD if you already have Clover installed. Or, you can try to install Clover on the actual USB driver, to make that one bootable, as well. Though I had issues with this method in the past (it's probably been fixed since then, but anyway). So I usually prefer to keep my USB installers intact, and use the Clover installation on my SSD to boot it. It will use that for future reboots anyway, after copying the installation files to the HDD/SSD. Yes I am aware of the terminal approach but on the desktop of the image I quoted under the system information screen you will see an iMac icon with createinstallmedia label. Also to anyone else testing Mojave arr you using one of the osxwifi + BT cards? If so does it still work natively in Mojave? As I'm looking at getting one. Edited June 11, 2018 by SavageAUS Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2018 Share Posted June 11, 2018 (edited) 12 minutes ago, SavageAUS said: Yes I am aware of the terminal approach but on the desktop of the image I quoted under the system information screen you will see an iMac icon with createinstallmedia label. Also to anyone else testing Mojave arr you using one of the osxwifi + BT cards? If so does it still work natively in Mojave? As I'm looking at getting one. Oh! I see it now. Sorry. I was like...what Create Install Media app? :))) Yeah, you're right. Now I see it too. Though, I have to say, it's the first time I see that app. But...using my detective skills, and googling skills, I determined that it should be this app: https://github.com/chris1111/Create-Install-Media As for your WiFI & BT adapter question, uhm, no, I'm not using something like that. So I can't really advise you on the matter. Though I did think about purchasing one. Not sure how useful would be...for a Desktop PC... I mean, that's pretty much what hold me back from purchasing one in the first place. Edited June 11, 2018 by arsradu Link to comment Share on other sites More sharing options...
ANONIMNIQ Posted June 11, 2018 Share Posted June 11, 2018 I installed Mojave and after installation finished I try to boot from HDD, starts booting, then grey screen with cursor appear and pc automatially restarts. How to fix it? Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2018 Share Posted June 11, 2018 (edited) 13 minutes ago, ANONIMNIQ said: I installed Mojave and after installation finished I try to boot from HDD, starts booting, then grey screen with cursor appear and pc automatially restarts. How to fix it? Hmm...make sure you're using the exact same Clover config as the USB drive? That would be my first idea... It sounds like they are different. If it worked fine booting from the USB drive, it should work just as well booting from the HDD/SSD. Edited June 11, 2018 by arsradu Link to comment Share on other sites More sharing options...
ANONIMNIQ Posted June 11, 2018 Share Posted June 11, 2018 1 minute ago, arsradu said: Hmm...make sure you're using the exact same Clover config as the USB drive? That would be my first idea... It sounds like they are different. If it worked fine booting from the USB drive, it should work just as well booting from the HDD/SSD. I mean I load Clover from the USB drive and select to boot Mojave installation from HDD. Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2018 Share Posted June 11, 2018 1 minute ago, ANONIMNIQ said: I mean I load Clover from the USB drive and select to boot Mojave installation from HDD. Well, make sure you boot from the same USB drive then, until you put Clover on the HDD, as well. Link to comment Share on other sites More sharing options...
ANONIMNIQ Posted June 11, 2018 Share Posted June 11, 2018 2 minutes ago, arsradu said: Well, make sure you boot from the same USB drive then, until you put Clover on the HDD, as well. Yes I boot from the same USB drve, Installer from the USB work just fine, after restart installation continue from HDD fine too, after finish installation PC restart, I boot to Clover again and select HDD partition with macos Mojave, starts booting, after few secconds grey screen with cursor appear and PC restarts automatically. Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2018 Share Posted June 11, 2018 Just now, ANONIMNIQ said: Yes I boot from the same USB drve, Installer from the USB work just fine, after restart installation continue from HDD fine too, after finish installation PC restart, I boot to Clover again and select HDD partition with macos Mojave, starts booting, after few secconds grey screen with cursor appear and PC restarts automatically. Sorry, I think I might have gotten it wrong. My bad. Could you, please, remove all the serials in your config plist SMBIOS and RT variable, and upload your Clover folder for analysis? Looks like you might have a KP somewhere. Weird that the installation worked fine... Also, try to boot in Verbose mode. See where it crashes. Link to comment Share on other sites More sharing options...
Recommended Posts