Naborisk Posted March 26, 2018 Share Posted March 26, 2018 (edited) 7 hours ago, Thane5 said: Do you have the i7? Because my i5 8Gb cant boot from that one at all. I'm also using i5 8gb and it boots fine. FYI I'm booting from external usb drive but I'm not sure if that makes a difference. Can you attach a picture of the log? Maybe you could also try the file attached below, it's pulled from the working usb drive. config.plist P.S.: BTW this config will NOT boot the installer, if I'm not mistaken you can disable the kext patch for graphics to boot the installer. Edited March 26, 2018 by Naborisk Link to comment Share on other sites More sharing options...
Thane5 Posted April 2, 2018 Author Share Posted April 2, 2018 Its booting and i'm getting the Apple loading screen, but halfway through it gets black again. Maybe you could send me your entire EFI to make sure its not a kext issue? Link to comment Share on other sites More sharing options...
Naborisk Posted April 4, 2018 Share Posted April 4, 2018 On 4/3/2018 at 2:51 AM, Thane5 said: Its booting and i'm getting the Apple loading screen, but halfway through it gets black again. Maybe you could send me your entire EFI to make sure its not a kext issue? For some reason I can't upload my EFI zip here so I've uploaded it at mega. Here you go https://mega.nz/#!vYsW1YjL!SDNwth2ig97gwddKjQWf56tQ7kBfVckwa01WnWpa_tY Link to comment Share on other sites More sharing options...
Thane5 Posted April 8, 2018 Author Share Posted April 8, 2018 Strange, i'm using a regular 16 gb USB to boot from, but it simply doesnt work. No clover, nothing. it just skips it. Link to comment Share on other sites More sharing options...
Naborisk Posted April 9, 2018 Share Posted April 9, 2018 On 4/8/2018 at 5:06 PM, Thane5 said: Strange, i'm using a regular 16 gb USB to boot from, but it simply doesnt work. No clover, nothing. it just skips it. Strange, at least clover should show up. Please make sure that USB is on the top of the list in the boot order and that Secure Boot is turned off. You can also try booting directly from the USB from the BIOS by swiping right on USB in the boot order menu. clover used to not show up for me too but that's not the case anymore. BTW which macOS version are you using? and are you trying to boot the installation USB or the OS? Link to comment Share on other sites More sharing options...
VrTech Posted April 17, 2018 Share Posted April 17, 2018 I'm really want to give a try now. Link to comment Share on other sites More sharing options...
VrTech Posted April 18, 2018 Share Posted April 18, 2018 (edited) On 4/9/2018 at 12:18 PM, Naborisk said: Strange, at least clover should show up. Please make sure that USB is on the top of the list in the boot order and that Secure Boot is turned off. You can also try booting directly from the USB from the BIOS by swiping right on USB in the boot order menu. clover used to not show up for me too but that's not the case anymore. BTW which macOS version are you using? and are you trying to boot the installation USB or the OS? I use this one but after halfway, it shows stop sign I've got i7 Version of the 2017 model Edited April 18, 2018 by VrTech Link to comment Share on other sites More sharing options...
Naborisk Posted April 21, 2018 Share Posted April 21, 2018 On 4/18/2018 at 9:18 PM, VrTech said: I use this one but after halfway, it shows stop sign I've got i7 Version of the 2017 model Can you boot with -v flag and try to take a picture of the result? stop sign usually means bad USB so maybe you can try another flash drive Link to comment Share on other sites More sharing options...
VrTech Posted April 21, 2018 Share Posted April 21, 2018 (edited) 2 hours ago, Naborisk said: Can you boot with -v flag and try to take a picture of the result? stop sign usually means bad USB so maybe you can try another flash drive Here is what I got after the screen was torn out apart on the last image and stop sign at top right Edited April 21, 2018 by VrTech Link to comment Share on other sites More sharing options...
Thane5 Posted April 23, 2018 Author Share Posted April 23, 2018 I've tried these several methods of booting into clover, but it still skips. I even double checked that i was using your Clover folder. Bios settings should be the same too... this is getting really strange here. Link to comment Share on other sites More sharing options...
Naborisk Posted April 24, 2018 Share Posted April 24, 2018 (edited) 19 hours ago, Thane5 said: I've tried these several methods of booting into clover, but it still skips. I even double checked that i was using your Clover folder. Bios settings should be the same too... this is getting really strange here. Try this folder: EFI_24042018.zip If you're booting to the installer, while in clover menu, go to options > graphics injector and change ig-platform-id to 0x12345678 Make sure to disable secure boot in BIOS (tpm can be left enabled). As for boot order I dragged USB on top of everything Edited April 24, 2018 by Naborisk Link to comment Share on other sites More sharing options...
Thane5 Posted May 10, 2018 Author Share Posted May 10, 2018 On 4/24/2018 at 7:20 PM, Naborisk said: If you're booting to the installer, while in clover menu, go to options > graphics injector and change ig-platform-id to 0x12345678 Booting the installer? Do you mean i have to reinstall it for this to work? I already tried to do that with the installed MacOS partition and it didnt change anything. Link to comment Share on other sites More sharing options...
Naborisk Posted May 10, 2018 Share Posted May 10, 2018 (edited) 7 hours ago, Thane5 said: Booting the installer? Do you mean i have to reinstall it for this to work? I already tried to do that with the installed MacOS partition and it didnt change anything. Opps, my bad I didn't clarify, I'll try to explain as clearly as possible. At first I thought you haven't installed yet so I said that in case you're booting into the installer. If the patch is in place, booting into a new installation or the macOS Installer will cause kernel panic since clover cannot patch the kext outside of kernel cache. So, to bypass this we need to boot the OS with an invalid platform-id (normally 0x12345678), that will prevent kernel panic while disabling graphics, and then we can rebuild kernel cache while inside the OS. Then after the kernel cache have been rebuilt we can boot with the patch on and a valid ig-platform-id (in this case 0x59160000). To recap: Boot with invalid ig-platform-id > rebuild kernel cache > Boot again with valid ig-platform-id So assuming you have a clean macOS installation that works but has no graphics, you can try booting with my config and it should cause a kernel panic, then you can boot once with an invalid ig-platform-id of 0x12345678 and run "sudo kextcache -i /" in terminal and reboot with a valid ig-platform-id (i.e. 0x59160000), that should then enable the graphics. Edited May 10, 2018 by Naborisk Link to comment Share on other sites More sharing options...
xuzhimin Posted November 24, 2018 Share Posted November 24, 2018 who can debug wifi drive for linux？ Link to comment Share on other sites More sharing options...
Encups Posted September 27, 2020 Share Posted September 27, 2020 Hello would you please help me to install Catalina on my surface pro 5 . i have already make usb bootable , but when I want to try it , I can’t find macOS installer . I don’t know maybe I have to check my bios ? thank you help me please step by step Link to comment Share on other sites More sharing options...
Recommended Posts