Thane5 Posted February 24, 2018 Share Posted February 24, 2018 After i recently created my first Hackintosh to use as a secondary OS to Windows, i often dreamed about how awesome it would be to have the same on my surface tablet. I've seen that people in this forum sucessfully got to run it on Previous Surface generations, but this one is still missing. I've followed some guides here and there, and managed to properly boot clover, but when i try to start the macOS installer, it stops at "kdp_poll: no debugger device" (See https://drive.google.com/open?id=1ctu7elXpCFYfTtlyd7sMXvMj4tW12z0pv for a screenshot). I've already googled this error but found nothing useful. So, to continue, i need some help from you... can anyone help me out with this? My Efi folder is attached here, or otherwise there https://drive.google.com/open?id=1V7TubZpH04Zd3ujFLX9mHGMXx7lHLTxb EFI.zip 1 Link to comment Share on other sites More sharing options...
MARZILLO Posted February 24, 2018 Share Posted February 24, 2018 fakesmc very old 1 Link to comment Share on other sites More sharing options...
Thane5 Posted February 24, 2018 Author Share Posted February 24, 2018 It made sense to me that this could be the reason, but no, still stuck at the same spot. 1 Link to comment Share on other sites More sharing options...
MARZILLO Posted February 24, 2018 Share Posted February 24, 2018 model? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 24, 2018 Share Posted February 24, 2018 try CLOVER.zip is a kabylake processor? have DGPU or only IntelHD? 1 Link to comment Share on other sites More sharing options...
Thane5 Posted February 24, 2018 Author Share Posted February 24, 2018 It's the "New" Surface Pro from 2017, with a Kabylake i5 7300U and Intel HD 620. Running on a 256 Gb SSD, 8Gb of Ram. I want to run this thing on my 64Gb micro SD card. try CLOVER.zip is a kabylake processor? have DGPU or only IntelHD? https://imgur.com/a/iKzYPThis is what i see last with your clover folder, then the screen goes black, even with restart after kernel panic disabled. i've had this before with different changes i've made to my config, but i assumed this is worse than my first result where it stops at "kdp_poll: no debugger device" 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 25, 2018 Share Posted February 25, 2018 It's the "New" Surface Pro from 2017, with a Kabylake i5 7300U and Intel HD 620. Running on a 256 Gb SSD, 8Gb of Ram. I want to run this thing on my 64Gb micro SD card. https://imgur.com/a/iKzYPThis is what i see last with your clover folder, then the screen goes black, even with restart after kernel panic disabled. i've had this before with different changes i've made to my config, but i assumed this is worse than my first result where it stops at "kdp_poll: no debugger device" try 2 config.plist.zip Link to comment Share on other sites More sharing options...
Thane5 Posted February 25, 2018 Author Share Posted February 25, 2018 That one finally lets me use the installer and install macOS sierra on my SD card, and on the first boot (where you only see the apple logo with a loading bar on white background) it finishes the installation, but then shuts down. If i restart, it now only gives me the microsoft logo and attemtps to restart. I think that this could be related to the Surface pro beein unable to boot from an SD card, so i'll probably try to install it on an SSD partiiton of the same size. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 25, 2018 Share Posted February 25, 2018 That one finally lets me use the installer and install macOS sierra on my SD card, and on the first boot (where you only see the apple logo with a loading bar on white background) it finishes the installation, but then shuts down. If i restart, it now only gives me the microsoft logo and attemtps to restart. I think that this could be related to the Surface pro beein unable to boot from an SD card, so i'll probably try to install it on an SSD partiiton of the same size. k after install, send me full files, i'll work in ur clover folder RunMe.app.zip Link to comment Share on other sites More sharing options...
Thane5 Posted February 25, 2018 Author Share Posted February 25, 2018 Big thanks for your help so far; the problem was in fact that the Surface can't boot from the microSD slot right now. If plugged into the USB port via a hub, it works as it should and i can boot into macOS. And amazingly, The touchpad and Keyboard work without problems, but of course touchscreen, touchpad gestures and pen don't. but thats for a later time. What i need to get fixed now is the graphics. for some reason, it runs in the native monitor resolution 8just like clover, idk why), and the intel hd 620 graphics are listed in the "About my Mac" window, though with most likely inaccurate video ram amounts. Also the general Ui is very laggy, animatiosn slow, and strong screen tearing plague it, just like you would expect it with disabled graphics. i'll try to find out more about that tomorrow. Most recent EFI attached here. EFI.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 25, 2018 Share Posted February 25, 2018 Big thanks for your help so far; the problem was in fact that the Surface can't boot from the microSD slot right now. If plugged into the USB port via a hub, it works as it should and i can boot into macOS. And amazingly, The touchpad and Keyboard work without problems, but of course touchscreen, touchpad gestures and pen don't. but thats for a later time. What i need to get fixed now is the graphics. for some reason, it runs in the native monitor resolution 8just like clover, idk why), and the intel hd 620 graphics are listed in the "About my Mac" window, though with most likely inaccurate video ram amounts. Also the general Ui is very laggy, animatiosn slow, and strong screen tearing plague it, just like you would expect it with disabled graphics. i'll try to find out more about that tomorrow. Most recent EFI attached here. use my app for full dump http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=292709 Link to comment Share on other sites More sharing options...
Thane5 Posted February 26, 2018 Author Share Posted February 26, 2018 That one Send me Thane5-MacBook-Pro.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 26, 2018 Share Posted February 26, 2018 That one check CLOVER.zip 1 Link to comment Share on other sites More sharing options...
Thane5 Posted February 26, 2018 Author Share Posted February 26, 2018 Nope, doesnt work. Says "Graphics Driver Failed to load: could not register with framebuffer driver!" during the boot process 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 26, 2018 Share Posted February 26, 2018 Nope, doesnt work. Says "Graphics Driver Failed to load: could not register with framebuffer driver!" during the boot process CLOVER.zip press O key in clover boot screen devices - remove intelgfx graphics - remove ig-platform-id Link to comment Share on other sites More sharing options...
Thane5 Posted February 28, 2018 Author Share Posted February 28, 2018 The kexts of that folder seem to be working, but something in your config gives me a blackscreen after a while of the boot process. I also can't find these boot options that you are describing in my version of clover. Link to comment Share on other sites More sharing options...
MaLd0n Posted February 28, 2018 Share Posted February 28, 2018 just remove InjectIntel in O key, Graphics, InjectIntel the problem is just a video, without video config in config.plist, work, but without acceleration need check it Link to comment Share on other sites More sharing options...
Thane5 Posted February 28, 2018 Author Share Posted February 28, 2018 i unchecked "inject Intel", same result. Link to comment Share on other sites More sharing options...
MaLd0n Posted February 28, 2018 Share Posted February 28, 2018 one more shot CLOVER.zip if u use my folder with ur config.plist, work? Link to comment Share on other sites More sharing options...
Thane5 Posted March 1, 2018 Author Share Posted March 1, 2018 It does boot if i use my Config, but only with inject intel active, but the Graphics acceleration still wont work then. Link to comment Share on other sites More sharing options...
MaLd0n Posted March 1, 2018 Share Posted March 1, 2018 u can try it MOBILE - GRAPHICS : Check InjectIntel - GRAPHICS : “ig-platform-id” changed to 0x591b0000 - DEVICES : “Fake ID” for IntelGFX changed to 0x59168086 - BOOT : Add “-disablegfxfirmware” under Custom Flags Link to comment Share on other sites More sharing options...
Thane5 Posted March 14, 2018 Author Share Posted March 14, 2018 No luck with that either. Most of these changes have no effect, but the new "ig-platform-id" again disables any graphical output and gives blackscreen. Link to comment Share on other sites More sharing options...
Mison Posted March 21, 2018 Share Posted March 21, 2018 Hello, I'd like to inquire about the work of new surface pro (2017) battery I can't find EmbeddedControl in DSDT and SSDT Link to comment Share on other sites More sharing options...
Naborisk Posted March 25, 2018 Share Posted March 25, 2018 (edited) Nice to find someone opening up a thread for this, actually I've been trying to hackintosh my Surface Pro 2017 for a while now here's the list of the things I've got working so far - Graphics (Full QE/CI) - some edits from rehabman's laptop config file will fix the black screen - Audio - using voodoohda (both speakers and headphone jack works) if you're getting a black screen with backlight on it means you've got graphics working, but due to the resolution of the Surface Pro's monitor being so high there needs to be a patch that will allow for more memory allocation (if I'm not mistaken) I'll upload my config here later. EDIT: here you go It would be nice I someone could help me fix the brightness config.plist Edited March 25, 2018 by Servine upload config.plist Link to comment Share on other sites More sharing options...
Thane5 Posted March 26, 2018 Author Share Posted March 26, 2018 Do you have the i7? Because my i5 8Gb cant boot from that one at all. Link to comment Share on other sites More sharing options...
Recommended Posts