MacPeet Posted July 31, 2018 Author Share Posted July 31, 2018 OK thanks. Which trial was it for the 755, which worked well. Link to my thread? I patch so much that I often forget, sorry. Link to comment Share on other sites More sharing options...
HarpoMarx Posted July 31, 2018 Share Posted July 31, 2018 Here is a roughly comprehensive summary of the three trials I have tested on Optiplex 755: Trial 1: From your Sierra guide front page around March of 2018, based on AppleALC 1.0.18 from December 28, 2016: Audio output worked, but I am unsure if the automatic headphone switching worked. Inputs may have worked, but after the 2018 security updates, the computer kernel panicked at boot, so I am unable to go back and test again easily. Trial 2: From your High Sierra guide front page around April of 2018, based on AppleALC 1.2.3 from February 9, 2018: Audio output worked perfectly, and headphones auto switched correctly. Input had one line-in option, which did not work using the front microphone port. This worked fine through at least security update 2018-002 on 10.12.6. Trial 3: From your post on this thread on July 18, 2018, based on AppleALC 1.3.0 from July 18, 2018: Audio output worked perfectly with headphones auto switching correctly. The input now had two line-in options, neither of which worked with a microphone. This works fine at least through security update 2018-004 on 10.12.6. Let me know if you want checksums or plist excerpts. As far as I know, this latest trial is the best so far. I don't know if I tested the input on the first trial, or if it worked. I could always go back and test it on a fresh older installation, if that is really necessary. Thanks! Link to comment Share on other sites More sharing options...
ismaelgonzalez23 Posted August 12, 2018 Share Posted August 12, 2018 Hey guys I'm new to hackintosh and I need some help... My setup: Dell Optiplex 790 i5 2500 not 2005k Radeon RX 560 4gb 20gb of RAM I followed every step from this guide but I cant seem to get to the installation screen. I boot clover just fine and I get the apple logo and loading bar but I only get to half and then my computer reboots... I see this installation guide is for the beta versions of high sierra the installer version i have is 10.13.6, is that what could be causing the installation to fail? Any suggestions? Link to comment Share on other sites More sharing options...
chris1111 Posted August 12, 2018 Share Posted August 12, 2018 (edited) 1 hour ago, ismaelgonzalez23 said: Hey guys I'm new to hackintosh and I need some help... My setup: Dell Optiplex 790 i5 2500 not 2005k Radeon RX 560 4gb 20gb of RAM I followed every step from this guide but I cant seem to get to the installation screen. I boot clover just fine and I get the apple logo and loading bar but I only get to half and then my computer reboots... I see this installation guide is for the beta versions of high sierra the installer version i have is 10.13.6, is that what could be causing the installation to fail? Any suggestions? Try <key>Inject</key> <dict> <key>ATI</key> <true/> You need also in kext/Other/WhateverGreen.kext and Lilu.kext But not sure I think this card need PSU minimum 400 Watt Edited August 12, 2018 by chris1111 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted August 14, 2018 Share Posted August 14, 2018 On 7/18/2018 at 5:28 PM, MacPeet said: trial_AppleALC_Lilu_Optiplex780_755.zip It's been awhile, but it works like a charm on my 755 with a clean install of DP7. Thanks dude! Link to comment Share on other sites More sharing options...
MacPeet Posted August 14, 2018 Author Share Posted August 14, 2018 @ricoc90 This version was about changes in the external inputs. Can you give a report on the 755? Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted August 15, 2018 Share Posted August 15, 2018 16 hours ago, MacPeet said: @ricoc90 This version was about changes in the external inputs. Can you give a report on the 755? LineOut works on both, LineIn doesn't but they never seemed to work for me Link to comment Share on other sites More sharing options...
DRBERTO648 Posted August 18, 2018 Share Posted August 18, 2018 thank you so much!!! my system is now up and running thanks to all your detailed guide. im addicted. im on my 3rd pc...cant stop hackintoshing... Link to comment Share on other sites More sharing options...
pepto Posted August 25, 2018 Share Posted August 25, 2018 Hello guys it has been a long time for me but i wanna try to install OSX 10.13 on my mackintosh 990 but when i wanna download OSX 10.13 i can't download the complete DMG i only downloaded a 22mb installer who wants to install on my current Hackintosh HDD. My question is how can i download the latest OSX 10.13 DMG file without damage my current 10.11 system which i use now. Link to comment Share on other sites More sharing options...
chris1111 Posted August 25, 2018 Share Posted August 25, 2018 (edited) 3 hours ago, pepto said: Hello guys it has been a long time for me but i wanna try to install OSX 10.13 on my mackintosh 990 but when i wanna download OSX 10.13 i can't download the complete DMG i only downloaded a 22mb installer who wants to install on my current Hackintosh HDD. My question is how can i download the latest OSX 10.13 DMG file without damage my current 10.11 system which i use now. Hi pepto nice to see you You have all of the latest Installer Update with the installinstallmacos.py script You only hate to open terminal sudo /path to/installinstallmacos.py or sudo press space bar and drop the script to the terminal window follow by ENTER Edited August 25, 2018 by chris1111 Link to comment Share on other sites More sharing options...
pepto Posted August 25, 2018 Share Posted August 25, 2018 I have already downloaded high sierra but faces now problems to create the USB installer i have use the tutorial and make the USB with the following command after that is install clover as described but when i wanna boot from the stick their nothing to boot from. sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ High\ Sierra.app --nointeraction Link to comment Share on other sites More sharing options...
pepto Posted August 25, 2018 Share Posted August 25, 2018 I can't see my install disk after installing clover on my usb thumb drive i uses 10.13.6 image for creating the usb installer but without success. What are i am missing Link to comment Share on other sites More sharing options...
chris1111 Posted August 25, 2018 Share Posted August 25, 2018 (edited) On 8/25/2018 at 10:45 AM, pepto said: I can't see my install disk after installing clover on my usb thumb drive i uses 10.13.6 image for creating the usb installer but without success. What are i am missing Replace CLOVER Folder by this CLOVER CLOVER.zip Edited August 27, 2018 by chris1111 I Just remove unnecessary pics on misc folder Link to comment Share on other sites More sharing options...
pepto Posted August 26, 2018 Share Posted August 26, 2018 OK Thanks for the clover.zip it works 2 Link to comment Share on other sites More sharing options...
pepto Posted August 27, 2018 Share Posted August 27, 2018 Ok thanks for the help everything is working again on my optiplex 790, it has been a long time for me to install OSX but after 2 days of struggling it works. Nice to see that the optiplex topic is still alive. Great work to all 1 1 Link to comment Share on other sites More sharing options...
pepto Posted August 30, 2018 Share Posted August 30, 2018 On 6/19/2018 at 4:59 PM, chris1111 said: Hi MacPeet needs new topic for macOS Mojave 10.14 For couple of days macOS Mojave is installed on my Main DELL Optiplex 790 everything's work like High Sierra Audio AppleALC Graphics Geforce GT 710 Wifi Atheros 5B193 USB 3.0 Network Intel 82579LM PCI Express Gigabit Ethernet :IntelMausi Can you share the Mojave files for the 790 i wanna install Mojave also on my 790. Link to comment Share on other sites More sharing options...
chris1111 Posted August 30, 2018 Share Posted August 30, 2018 Bios A22 Update for Dell Optiplex 790 Link to comment Share on other sites More sharing options...
pepto Posted September 7, 2018 Share Posted September 7, 2018 On 8/30/2018 at 3:00 PM, chris1111 said: Bios A22 Update for Dell Optiplex 790 Ok I have done the update on my 790 but what about the clover and the apfs refi file ? ì have tried it with the latest clover but no success Link to comment Share on other sites More sharing options...
chris1111 Posted September 7, 2018 Share Posted September 7, 2018 8 minutes ago, pepto said: Ok I have done the update on my 790 but what about the clover and the apfs refi file ? ì have tried it with the latest clover but no success Clover and APFS You need apfs.efi send here the complet EFI Folder you have in EFI Link to comment Share on other sites More sharing options...
pepto Posted September 7, 2018 Share Posted September 7, 2018 1 hour ago, chris1111 said: Clover and APFS You need apfs.efi send here the complet EFI Folder you have in EFI Sorry but the file is bigger than 10mb Link to comment Share on other sites More sharing options...
chris1111 Posted September 7, 2018 Share Posted September 7, 2018 8 minutes ago, pepto said: Sorry but the file is bigger than 10mb use external link Link to comment Share on other sites More sharing options...
pepto Posted September 7, 2018 Share Posted September 7, 2018 18 minutes ago, chris1111 said: use external link https://drive.google.com/file/d/1Ikjv3eqGAduHEkjWS0Y0Sy2Rfub8rbhf/view?usp=sharing here you can find it Link to comment Share on other sites More sharing options...
chris1111 Posted September 7, 2018 Share Posted September 7, 2018 4 minutes ago, pepto said: https://drive.google.com/file/d/1Ikjv3eqGAduHEkjWS0Y0Sy2Rfub8rbhf/view?usp=sharing here you can find it try to ad this Driver in drivers64 HFSPlus-64.efi.zip 1 Link to comment Share on other sites More sharing options...
bocajoe Posted September 15, 2018 Share Posted September 15, 2018 (edited) Thank you for this awesome guide! Sleep and sound seem to be the only things not working. I have AppleALC.kext and injected Audio 11 but still no sound. Can someone take a look at my attached RunMe (IOreg) files below and let me know what I missed? Send me iMac.at.net.zip SPECS: Dell 780 Mini Tower Nvidia FX580 Video Card Intel Core 2 Quad Q9400 CPU Edited September 16, 2018 by bocajoe Link to comment Share on other sites More sharing options...
MacPeet Posted September 16, 2018 Author Share Posted September 16, 2018 Optiplex780 / 760:LayoutID 11 or LayoutID 13The codec in AppleALC is broken for 780/760 since 10.13.4. Rollback AppleHDA from 10.13.3 is necessary. 1 Link to comment Share on other sites More sharing options...
Recommended Posts