morpheousman Posted April 26, 2018 Share Posted April 26, 2018 There are new Bios updates that came out. I think these were to address the security defects in the kernel? I updated both my 790 and 990 without issue. 1 Link to comment Share on other sites More sharing options...
blxkspell Posted May 1, 2018 Share Posted May 1, 2018 ive successfully run high sierra now, but i dont know how to get my audio work. Only the HDMI and AirPlay devices are listed in the Settings. Ive already tried copying the recent lilu and AppleHDA kexts into the /kexts/other folder on the EFI Partition Link to comment Share on other sites More sharing options...
unrealpants Posted May 3, 2018 Share Posted May 3, 2018 Hi all ... I have managed to set up my 780 with High Sierra after a bit of struggle but now it boots without interruption and I'm rapt. I had to edit the Clover boot loader options to specifically disable the ATI Injection option to get this to work. I thought I would need this since I am using an ATI 5450 as many have recommended but with the option enabled this just threw a bunch of errors on the screen after trying to run the install or load options from the boot loader. So now, my next priority is to get the resolution right. The display should be set at 1920x1080 but it's set lower and stretched. How can I go about tweaking this resolution setting? In the display properties there is only one option - 1280x1024. Cheers Paul Link to comment Share on other sites More sharing options...
morpheousman Posted May 3, 2018 Share Posted May 3, 2018 Did you rollback kexts as explained in Step 6 & 8? Save in advance the following Kext's from your Sierra installation from /System/Library/Extensions: AMDRadeonX3000.kextAMDRadeonX3000GLDriver.bundleIOAccelerator2D.pluginIOAcceleratorFamily2.kext Link to comment Share on other sites More sharing options...
unrealpants Posted May 4, 2018 Share Posted May 4, 2018 hi morpheusman ... no.. I didn't ... I thought that was only necesary if the screen went black -- which it didn't I'll try that tonight. While I have your ear - so to speak - can you suggest how I would go about making whatever changes I need to make so that I can connect remotely (using eg VNC) to my hackintosh? I tried from another machine on my home network and I keep getting "connection refused" Cheers Paul Link to comment Share on other sites More sharing options...
Arsalan.ghaffar Posted May 5, 2018 Share Posted May 5, 2018 hi, i got to installer but cant find my HDD there, its currenlty in ntfs, running windows... optiplex 780, c2d... Link to comment Share on other sites More sharing options...
morpheousman Posted May 6, 2018 Share Posted May 6, 2018 On 5/3/2018 at 10:03 PM, unrealpants said: While I have your ear - so to speak - can you suggest how I would go about making whatever changes I need to make so that I can connect remotely (using eg VNC) to my hackintosh? I tried from another machine on my home network and I keep getting "connection refused" Cheers Paul I use TeamViewer, but have not used it in a while. 4 hours ago, Arsalan.ghaffar said: hi, i got to installer but cant find my HDD there, its currenlty in ntfs, running windows... optiplex 780, c2d... Are your Bios Settings Correct, and is the Hard Drive seen in your Bios? Link to comment Share on other sites More sharing options...
Arsalan.ghaffar Posted May 6, 2018 Share Posted May 6, 2018 yes its detected in bios, and set to AHCI mode, currently system is running windows... Link to comment Share on other sites More sharing options...
unrealpants Posted May 14, 2018 Share Posted May 14, 2018 Hi morpheusman > Did you rollback kexts as explained in Step 6 & 8? Yes, I now have done this and it has worked! Next challenge -- audio. I tried following the steps but I had no luck with my Optiplex 7780 using the ALC method. Any tips? .... or are there some more detailed steps somewhere I can try to follow for this? Cheers Paul Link to comment Share on other sites More sharing options...
MacPeet Posted May 14, 2018 Author Share Posted May 14, 2018 Since the first beta's 10.13.4, the audio codec AD1984A has problems with AppleALC + Lilu (only Optiplex780 and 760). With rollback AppleHDA from 10.13.3 it works well. AppleHDA.kext_rollback10.13.3.zip I have not found the error yet. 1 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted May 15, 2018 Share Posted May 15, 2018 On 5/4/2018 at 4:03 AM, unrealpants said: hi morpheusman ... no.. I didn't ... I thought that was only necesary if the screen went black -- which it didn't I'll try that tonight. While I have your ear - so to speak - can you suggest how I would go about making whatever changes I need to make so that I can connect remotely (using eg VNC) to my hackintosh? I tried from another machine on my home network and I keep getting "connection refused" Cheers Paul Maybe I'm joining the party a little late, but in order to use remote access you'll need to enable this in settings > sharing > screen sharing. DP5 running without issues (as expected) on my 790 Link to comment Share on other sites More sharing options...
MacPeet Posted May 15, 2018 Author Share Posted May 15, 2018 (edited) DP5 update Optiplex780 also without problems As always: rollback graphics kext for the HD5450 rollback AppleHDA for audio @unrealpants rollback appelhda works? Edited May 15, 2018 by MacPeet Link to comment Share on other sites More sharing options...
unrealpants Posted May 18, 2018 Share Posted May 18, 2018 This process has been fun and productive... but more problems keep appearing ... now the network drops out rather regularly.... I notice on another forum they suggest to do a 'NIC restart' https://www.tonymacx86.com/threads/network-stops-working-when-downloading-large-files.22473/ If that's the solution and it's something I can automate, I'm happy to try. Link to comment Share on other sites More sharing options...
unrealpants Posted May 20, 2018 Share Posted May 20, 2018 (edited) @MacPeet no.... I tried using EasyKext to rollback using the kexts you supplied from 10.13.3 but no joy. Is there something else I need to do?... in your first post, you suggested using 11 or 13 to match the on-board audio in Clover Configurator. I'll try searching for those instructions and give it another go. In other news, my network dropouts seem to have gone away.... yay! .... ok so I've found these instrucitons https://hackintosher.com/guides/get-hackintosh-audio-working/ Should I be following these? I don't want to mess anything up now things are working so well (except for audio) Edited May 20, 2018 by unrealpants Link to comment Share on other sites More sharing options...
MacPeet Posted May 20, 2018 Author Share Posted May 20, 2018 @unrealpants post your Clover folder (DSDT, config.plist, kext folder) Link to comment Share on other sites More sharing options...
unrealpants Posted May 20, 2018 Share Posted May 20, 2018 @MacPeet the whole thing zipped is 30 mb which is too big for this forum so I'll send specifically those items you mentioned Clover.zip Link to comment Share on other sites More sharing options...
MacPeet Posted May 20, 2018 Author Share Posted May 20, 2018 config.plist: I have SIP and firmware data set HDAS to HDEF not necessary config.plist.zip layoutID 11 is set in your DSDT this is DSDT with layoutID 13: DSDT.aml_layoutID13.zip latest releases: AppleALC1.2.6_und_Lilu1.2.3.RELEASE.zip Link to comment Share on other sites More sharing options...
unrealpants Posted May 20, 2018 Share Posted May 20, 2018 @MacPeet I replaced my config.plist, DSDT.aml and the AppleALC and Lilu files with the ones that that you supplied but still I see no option at all for audio output device. it feels like I'm *so* close but have missed some minor but important step. In this dialogue there are no options when I click "Selected sound output device" Link to comment Share on other sites More sharing options...
MacPeet Posted May 20, 2018 Author Share Posted May 20, 2018 voodoohda disabler still on boardcheck L / Echeck terminal "kextstat"check Systeminformationen.app/Extensions if AppleHDA is loaded Link to comment Share on other sites More sharing options...
morpheousman Posted May 20, 2018 Share Posted May 20, 2018 On 5/13/2018 at 11:51 PM, unrealpants said: Hi morpheusman > Did you rollback kexts as explained in Step 6 & 8? Yes, I now have done this and it has worked! Next challenge -- audio. I tried following the steps but I had no luck with my Optiplex 7780 using the ALC method. Any tips? .... or are there some more detailed steps somewhere I can try to follow for this? Cheers Paul Sorry, the Video kexts rollback is something I have not had to deal with because I upgraded to 790 and 990. Link to comment Share on other sites More sharing options...
unrealpants Posted May 21, 2018 Share Posted May 21, 2018 13 hours ago, MacPeet said: voodoohda disabler still on boardcheck L / Echeck terminal "kextstat"check Systeminformationen.app/Extensions if AppleHDA is loaded how could you tell that the voodoohda disabler is "still on board"? if this is a bad thing, how do I get rid of it? by "Check L / E" do you mean Library/Extensions ? Link to comment Share on other sites More sharing options...
unrealpants Posted May 21, 2018 Share Posted May 21, 2018 14 hours ago, MacPeet said: voodoohda disabler still on boardcheck L / Echeck terminal "kextstat"check Systeminformationen.app/Extensions if AppleHDA is loaded OK I've checked Library/Extensions - AppleHDA.kext is there I checked System/Library/Extensions - AppleHDA.kext is there I ran "kextstat" and could not see any reference to ApplieHDA.kext in the output.. the only thing close was com.apple.driver.AppleHDAController i couldn't find any "Systeminformation.app/Extensions" Is this meaningful? Link to comment Share on other sites More sharing options...
MacPeet Posted May 21, 2018 Author Share Posted May 21, 2018 AppleHDA does not belong to Library / Extensions You probably installed the rollback AppleHDA 10.13.3 after Library / Extensions delete AppleHDA in Library / Extensions and Rollback AppleHDA 10.13.3 to S / L / E Link to comment Share on other sites More sharing options...
unrealpants Posted May 22, 2018 Share Posted May 22, 2018 17 hours ago, MacPeet said: AppleHDA does not belong to Library / Extensions You probably installed the rollback AppleHDA 10.13.3 after Library / Extensions delete AppleHDA in Library / Extensions and Rollback AppleHDA 10.13.3 to S / L / E Hi MacPeet .. I deleted AppleHDA in L / E and rolled back AppleHDA 10.13.3 to S / L / E AppleHDA.kext definitely appears in S / L / E now and not in L / E but still no sound options and kextstatus is not showing even the AppleHDAController I saw yesterday Should I try playing with the 'Options' that appear when the Clover bootloader comes on at startup? Link to comment Share on other sites More sharing options...
MacPeet Posted May 22, 2018 Author Share Posted May 22, 2018 Audio is activated in the BIOS ??? DSDT.aml is in EFI/Clover/ACPI/patched/ ??? Check System Information Extensions in Utilities: Let KextUtility run again for cache rebuild 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts