xtddd Posted January 29, 2018 Share Posted January 29, 2018 (edited) I still recommend using a SSDT with Whatevergreen simply because it renames the PEGP to GFX0 correctly on its own. As Mald0n stated earlier to you that using Clover DSDT rename feature will rename "ALL" PEGP names in your DSDT and rename them to GFX0 which is not a good idea. Attached is the SSDT I use for my RX 580 with Whatevergreen and it renames it to GFX0 in the correct place. whatevergreen is still needed to place to clover/kexts? so no need to use Radeondeinit parameter? can i only use whatevergreen ? Edited January 29, 2018 by xtddd Link to comment Share on other sites More sharing options...
PMheart Posted January 29, 2018 Share Posted January 29, 2018 837d940f 0f839704 dissa to 0: 83 7d 94 0f cmp DWORD PTR [rbp-0x6c],0xf 4: 0f .byte 0xf 5: 83 .byte 0x83 6: 97 xchg edi,eax 7: 04 .byte 0x4 ??? 0f 83 97 04 00 00 (OOPS! I forgot one 00 byte before) is jae 0x117be. So NOPping that will disable the jump if the port is >= 0x0F. Hi PMHeart this patch produces a reboot when initializing usb in my rig +1 Sorry! I made the wrong patch before! Please try this one: 83 7D 94 0F 0F 83 97 04 00 00 -> 83 7D 94 0F 90 90 90 90 90 90 3 Link to comment Share on other sites More sharing options...
Pavo Posted January 29, 2018 Share Posted January 29, 2018 whatevergreen is still needed to place to clover/kexts? so no need to use Radeondeinit parameter? can i only use whatevergreen ? It is not required per say but it is recommended. I would never use RadeonDeInit. Link to comment Share on other sites More sharing options...
MaLd0n Posted January 29, 2018 Author Share Posted January 29, 2018 0f 83 97 04 00 00 (OOPS! I forgot one 00 byte before) is jae 0x117be. So NOPping that will disable the jump if the port is >= 0x0F. Sorry! I made the wrong patch before! Please try this one: 83 7D 94 0F 0F 83 97 04 00 00 -> 83 7D 94 0F 90 90 90 90 90 90 work! what diff from Fred's patch? 2 Link to comment Share on other sites More sharing options...
RandomTech Posted January 29, 2018 Share Posted January 29, 2018 Hello, USB remove limit (10.13.4) Find <837d940f 0f839704> Name com.apple.driver.usb.AppleUSBXHCI Replace <837d9411 0f839704> Fred Thank you for fixing the most important problem here, all other talks about RX being recognized by system I think is not a thing to talk too much about Link to comment Share on other sites More sharing options...
PMheart Posted January 29, 2018 Share Posted January 29, 2018 work! what diff from Fred's patch? Fred's increases the port limit. (The default 0x0F is 15 in decimal, and it increases the limitation.) Mine disables the limit entirely. (You can have any port be working.) 3 Link to comment Share on other sites More sharing options...
Pavo Posted January 29, 2018 Share Posted January 29, 2018 Thank you for fixing the most important problem here, all other talks about RX being recognized by system I think is not a thing to talk too much about Yes it was a major problem but this thread was made to give feedback for what has changed in this version. Yes most change was USB but also AMD card identification Link to comment Share on other sites More sharing options...
MaLd0n Posted January 29, 2018 Author Share Posted January 29, 2018 Fred's increases the port limit. (The default 0x0F is 15 in decimal, and it increases the limitation.) Mine disables the limit entirely. (You can have any port be working.) Many thx! 2 Link to comment Share on other sites More sharing options...
xtddd Posted January 29, 2018 Share Posted January 29, 2018 Yes it was a major problem but this thread was made to give feedback for what has changed in this version. Yes most change was USB but also AMD card identification hi,rx580 can work oob without whatevergreen..so there is necessary to need this kext? i get confused. Link to comment Share on other sites More sharing options...
Pavo Posted January 29, 2018 Share Posted January 29, 2018 hi,rx580 can work oob without whatevergreen..so there is necessary to need this kext? i get confused. Again it is not necessary, it just helps with multi-monitors better. 1 Link to comment Share on other sites More sharing options...
xtddd Posted January 29, 2018 Share Posted January 29, 2018 @pavo. thanks. i use your 580.aml and whatevergreen...but metal has no gpufamily v3 support. Link to comment Share on other sites More sharing options...
Pavo Posted January 29, 2018 Share Posted January 29, 2018 @pavo. thanks. i use your 580.aml and whatevergreen...but metal has no gpufamily v3 support As long as it says Metal supported the gpufamily feature set doesn't matter. Link to comment Share on other sites More sharing options...
xtddd Posted January 29, 2018 Share Posted January 29, 2018 As long as it says Metal supported the gpufamily feature set doesn't matter. great.but.i find all is ok with only whatevergreen.. so what is your 580.aml used to do? Link to comment Share on other sites More sharing options...
Pavo Posted January 29, 2018 Share Posted January 29, 2018 great.but.i find all is ok with only whatevergreen.. so what is your 580.aml used to do? It adds HDEF device to the GPU so you can have HDMI/DP audio, makes the first display port set as primary bootup display. 1 Link to comment Share on other sites More sharing options...
xtddd Posted January 29, 2018 Share Posted January 29, 2018 (edited) @pavo..i get it...you still use whatevergreen in 10.13.4beta? just updated to 13.4 beta1 with only whatevergreen...gpufamily v3 display again. gpu device name is gfx0 Edited January 29, 2018 by xtddd Link to comment Share on other sites More sharing options...
Badruzeus Posted January 30, 2018 Share Posted January 30, 2018 Talking about Beta, does anyone get issue with QuickLook & Preview.app not showing image properly (especially on Fullscreen mode), or overlay media controller is gone? Running it with GF119 I got these, Native & WebDriver produce same results.. just to make sure that it was OS bugs and not related to graphics. Thanks. Link to comment Share on other sites More sharing options...
chris1111 Posted January 30, 2018 Share Posted January 30, 2018 Talking about Beta, does anyone get issue with QuickLook & Preview.app not showing image properly (especially on Fullscreen mode), or overlay media controller is gone? Running it with GF119 I got these, Native & WebDriver produce same results.. just to make sure that it was OS bugs and not related to graphics. Thanks. Yes with my Saphire ATI Radeon HD 5570 1gig native when I open an image it turns blue but I see it intact on the desktop only PDF opens correctly and same thing in the Quick time video no arrow I hope its only a Apple bug that it does not let go of the support for the small ATI card This card works perfectly from 10.6.8 to 10.13.3 1 Link to comment Share on other sites More sharing options...
Badruzeus Posted January 30, 2018 Share Posted January 30, 2018 Yes with my Saphire ATI Radeon HD 5570 1gig native when I open an image it turns blue but I see it intact on the desktop only PDF opens correctly and same thing in the Quick time video no arrow I hope its only a Apple bug that it does not let go of the support for the small ATI card This card works perfectly from 10.6.8 to 10.13.3 OK, thanks for ur tests. I also hope it was OS bug, just curious while I run "$ sudo update_dyld_shared_cache -force" I got message related to QuickLook. Strange is a report from Real iMac13,2 user with GTX 675MX under 17E319j it has no problem at all. Let's see on later release, thanks. Link to comment Share on other sites More sharing options...
chris1111 Posted January 30, 2018 Share Posted January 30, 2018 OK, thanks for ur tests. I also hope it was OS bug, just curious while I run "$ sudo update_dyld_shared_cache -force" I got message related to QuickLook. Strange is a report from Real iMac13,2 user with GTX 675MX under 17E319j it has no problem at all. Let's see on later release, thanks. I think lots of Graphics kexts change in 10.13.4 I know also in the update 10.13.3 the AMD5000Controller.kext change ? but no effect on the 5570, only in 10.13.4 1 Link to comment Share on other sites More sharing options...
SwithDrawn Posted January 30, 2018 Share Posted January 30, 2018 Updated from the App Store without any issue and running WebDriver-387.10.10.10.25.156. All looks good - not seeing that preview/quicklook bug either. Has anyone else noticed slightly improved FPS when using HiDPI scaling? Metal score went up a bit (226444 to 228104) from 10.13.3. Premiere Pro UI feels faster while running my 3840x2160 display @ 2560 x 1440 HiDPI. Link to comment Share on other sites More sharing options...
chris1111 Posted January 30, 2018 Share Posted January 30, 2018 does anyone know where this image is in macOS High Sierra 10.13.4? I would like to be able to change it Link to comment Share on other sites More sharing options...
truemac Posted January 31, 2018 Share Posted January 31, 2018 /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources /System/Library/Displays/Contents/Resources/Overrides/Icons.plist 1 Link to comment Share on other sites More sharing options...
Hackmac101 Posted February 1, 2018 Share Posted February 1, 2018 WhateverGreen 1.1.5 with some fixes for 10.13.4, let's test it. https://github.com/vit9696/WhateverGreen/ 1 Link to comment Share on other sites More sharing options...
Pavo Posted February 1, 2018 Share Posted February 1, 2018 Already have and works here. Link to comment Share on other sites More sharing options...
xtddd Posted February 1, 2018 Share Posted February 1, 2018 No issue on x299. Zrzut ekranu 2018-01-24 o 23.24.49.png do you use whatevergreen to enable rx580 in 10.13.4 beta1? Link to comment Share on other sites More sharing options...
Recommended Posts