MyTopTen Posted January 16, 2018 Share Posted January 16, 2018 Hey, I've recently installed High Sierra fresh and I've been having this problem with clover since. It basically shows two options for booting Windows from the EFI partition (Windows EFI, not OS X's): - Boot Windows EFI from EFI - Boot Windows From EFI Only the first works. So, I figured it would fix the problem if I just turn off all Clover's scan options and then created custom entries for OS X and Windows, but the problem still persists. If I find the UUID of Boot Windows from EFI and hide it in Clover Configurator, it will simply hide both Windows boot options, including my custom entry, so somehow it's getting these two entries from the same partition. What can I do to fix this issue? Let me know if you need my bootlog or anything. Best regards. Link to comment Share on other sites More sharing options...
TrustAugustus Posted January 24, 2018 Share Posted January 24, 2018 Do you have the appropriate hfs+ or apfs driver in your clover folder? Link to comment Share on other sites More sharing options...
Vinicius P. Miranda Posted January 31, 2018 Share Posted January 31, 2018 Hey, I've recently installed High Sierra fresh and I've been having this problem with clover since. It basically shows two options for booting Windows from the EFI partition (Windows EFI, not OS X's): - Boot Windows EFI from EFI - Boot Windows From EFI Only the first works. So, I figured it would fix the problem if I just turn off all Clover's scan options and then created custom entries for OS X and Windows, but the problem still persists. If I find the UUID of Boot Windows from EFI and hide it in Clover Configurator, it will simply hide both Windows boot options, including my custom entry, so somehow it's getting these two entries from the same partition. What can I do to fix this issue? Let me know if you need my bootlog or anything. Best regards. Use Clover configurator and in Gui create a Custom Entries like this UEFI Internal: Check if it worked. Note: In Custom Entries for Windows 10, set Hidden = No Link to comment Share on other sites More sharing options...
Chris Stocker Posted February 18, 2018 Share Posted February 18, 2018 Hey, I've recently installed High Sierra fresh and I've been having this problem with clover since. It basically shows two options for booting Windows from the EFI partition (Windows EFI, not OS X's): - Boot Windows EFI from EFI - Boot Windows From EFI Only the first works. So, I figured it would fix the problem if I just turn off all Clover's scan options and then created custom entries for OS X and Windows, but the problem still persists. If I find the UUID of Boot Windows from EFI and hide it in Clover Configurator, it will simply hide both Windows boot options, including my custom entry, so somehow it's getting these two entries from the same partition. What can I do to fix this issue? Let me know if you need my bootlog or anything. Best regards. I am guessing that you are using two drives for Windows and macOS. If you move the Microsoft folder from the EFI partition on the Windows drive over to the EFI partition on the macOS drive that contains Clover, you can then boot your custom Windows entry selecting the EFI partition of the macOS drive. You should be able to mount that "No Name" EFI partition on the Windows drive using Clover Configurator. You then erase the EFI folder on the Windows drive's EFI partition. You may want to backup these folders before you erase. After that you can then proceed to hide that partition to remove that "Boot Windows from EFI" icon from the Clover menu as you did before. Hope this helps. Link to comment Share on other sites More sharing options...
vpac Posted February 18, 2018 Share Posted February 18, 2018 I would like to simply change the name shown under the Clover boot options and am doing something wrong. I believe I have the correct UUID, but I am using APFS and so there are 4 volumes with the same UUID. I tried all four paths but I still have no change in the boot name. I really don't know what more to change. I've got my diskutil list, my diskutil apfs list, my bootlog and I should be able to do this, but just coming up short. Has anyone done this that can help me figure out what I am doing incorrectly? Link to comment Share on other sites More sharing options...
frankiee Posted February 19, 2018 Share Posted February 19, 2018 Did you install Windows after installing Clover? Link to comment Share on other sites More sharing options...
vpac Posted February 20, 2018 Share Posted February 20, 2018 Did you install Windows after installing Clover? Yes I did. I installed MacOSX first and that is when I installed Clover. I can't change either the windows or the mac option. I'm trying to more understand the nuts and bolts of how Clover works. Would it make a difference in when Clover was installed as to whether it would let me edit the descriptions? If so, can you explain why? It would be good to know. Thanks Link to comment Share on other sites More sharing options...
frankiee Posted February 20, 2018 Share Posted February 20, 2018 Try to reinstall Clover Link to comment Share on other sites More sharing options...
telepati Posted February 20, 2018 Share Posted February 20, 2018 Just write Preboot on Hide section on Clover Configurator. Link to comment Share on other sites More sharing options...
llamafilm Posted September 9, 2018 Share Posted September 9, 2018 I have a similar issue. I added a custom entry in Clover so I can name it nicely "Windows 10". This one works fine. But I also have the duplicate "Boot Windows from EFI" showing, and this one does not boot. If I add this UUID to the hidden list, then both of them disappear. I have two separate SATA disks for Windows 10 and macOS. This is Clover 4658. 1 Link to comment Share on other sites More sharing options...
bronxteck Posted September 9, 2018 Share Posted September 9, 2018 try adding the word "legacy" to your config.plist GUI/ hide volumes without the "" Link to comment Share on other sites More sharing options...
llamafilm Posted September 10, 2018 Share Posted September 10, 2018 12 hours ago, bronxteck said: try adding the word "legacy" to your config.plist GUI/ hide volumes without the "" Didn't work. Thanks though. Link to comment Share on other sites More sharing options...
llamafilm Posted September 13, 2018 Share Posted September 13, 2018 Bump. Anyone know how to hide "Boot Windows from EFI" ? Link to comment Share on other sites More sharing options...
Amit Meena Posted July 1, 2019 Share Posted July 1, 2019 On 9/13/2018 at 12:58 PM, llamafilm said: Bump. Anyone know how to hide "Boot Windows from EFI" ? I am also facing the issue Link to comment Share on other sites More sharing options...
Nichoram Posted September 19, 2019 Share Posted September 19, 2019 (edited) Only the windows efi open. Clover will open after move the 'microsoft efi ' from the folder EFI Hp laptop 15.... core i5 Edited September 19, 2019 by Nichoram Link to comment Share on other sites More sharing options...
mikeoh90 Posted September 22, 2019 Share Posted September 22, 2019 (edited) This has been driving me nuts all evening, but I've finally sorted it! I signed up to this forum purely so I could post this and hopefully save someone else a headache! I was having the exact same issue with two volumes showing, which were from the same disk UUID, meaning I couldn't filter them that way, and filtering by name wouldn't work either. I had assumed that I had already filtered out legacy disks by setting custom scan settings in the GUI section of Clover Configurator and unticking legacy, but then when manually looking through my config file, no mention of legacy anywhere! The configurator isn't adding anything about legacy to the config file, unless you are closing to enable legacy. If you untick/leave it unticked it removes any mention of legacy from the config rather than changing it to false! <dict> <key>Entries</key> <true/> <key>Legacy</key> <false/> <key>Tool</key> <false/> </dict> With legacy false in my config and other volumes filtered by UUID I know just have my boot into windows 10 and boot into OS X options, no third option that doesn't work!! Edited September 22, 2019 by mikeoh90 2 Link to comment Share on other sites More sharing options...
kira96 Posted January 16, 2020 Share Posted January 16, 2020 On 9/22/2019 at 5:35 PM, mikeoh90 said: This has been driving me nuts all evening, but I've finally sorted it! I signed up to this forum purely so I could post this and hopefully save someone else a headache! I was having the exact same issue with two volumes showing, which were from the same disk UUID, meaning I couldn't filter them that way, and filtering by name wouldn't work either. I had assumed that I had already filtered out legacy disks by setting custom scan settings in the GUI section of Clover Configurator and unticking legacy, but then when manually looking through my config file, no mention of legacy anywhere! The configurator isn't adding anything about legacy to the config file, unless you are closing to enable legacy. If you untick/leave it unticked it removes any mention of legacy from the config rather than changing it to false! <dict> <key>Entries</key> <true/> <key>Legacy</key> <false/> <key>Tool</key> <false/> </dict> With legacy false in my config and other volumes filtered by UUID I know just have my boot into windows 10 and boot into OS X options, no third option that doesn't work!! I signed in only to say: thank you so much! I've been struggling with this all day >.< Link to comment Share on other sites More sharing options...
Peke Posted February 29, 2020 Share Posted February 29, 2020 On 1/16/2020 at 12:33 PM, kira96 said: I signed in only to say: thank you so much! I've been struggling with this all day >.< Thanks man! Really that hit the spot 100%! I was crazy doing everything to get rid off windows volume without names and duplicated. Just unticking and then changing the last true to false under "tool" and everything is fine now. Link to comment Share on other sites More sharing options...
RiotMode Posted December 18, 2020 Share Posted December 18, 2020 On 9/22/2019 at 10:35 PM, mikeoh90 said: <dict> <key>Entries</key> <true/> <key>Legacy</key> <false/> <key>Tool</key> <false/> </dict> Thank you so much! That helped me too! ( Tool = False ) (in clover configurator it showed up as false but in the config.plist with textedit it was true... ) Link to comment Share on other sites More sharing options...
Recommended Posts