KGP-iMacPro Posted March 3, 2018 Author Share Posted March 3, 2018 (edited) On 3/3/2018 at 11:19 AM, Matthew82 said: I thing for you best solution will be start from zero and create TB ssdt from pattern in this post http://www.insanelymac.com/forum/topic/323540-thunderbolt-drivers/?p=2599598. In this moment I can only make test with WD Book 8TB connected to DSB2. (I have Focusrite TB 2 device but I still waiting for adapter to TB3. So then I can make more tests) But with this HDD connected hot swap working OK. In ioreg before and after connecting everything look the same. Zrzut ekranu 2018-03-03 o 11.34.11.png Zrzut ekranu 2018-03-03 o 11.09.04.png Well in my opinion the problem is the yet missing DSB1 AHCI TB PCI Device Implementation. Any idea when inspecting my DSB1 IOREG? There are apparently 2 pci bridges and a pci1b21,612 AHCI controller PCI device. Trying for hours to implement this DSB1 pattern in my SDDT without much progress or success... The AHCI controller is also the only PCI device apparently not properly implemented in Apple's system report. The DSB1 IOREG pattern seems also missing in the thread you refer to.. Likely there was no TB HDD connected when saving the IOREG. With hot swap you refer to the TB XHCI ports? TBEX 3 XHCI Hotplug is also fully working in my case... But no hot plug for TB AHCI ports yet.... Edited March 12, 2018 by KGP-iMacPro Link to comment Share on other sites More sharing options...
apfelnico Posted March 3, 2018 Share Posted March 3, 2018 Patch DSDT, second part I have created a DsdtPatchesAsusPrimeX299.txt to patch the DSDT at once. All devices installed in the board are included, including the Darwin Check. Clover ACPI patches (except for "PC00-> PCI0") are no longer needed. In the SSDT, you only define devices that are additionally available (graphics card, Thunderbolt card, Wifi / Bluetooth combo etc.). how is it done? Open a copy of the DSDT (EFI / CLOVER / ACPI / origin) with MaciASL, select "Patch" and insert the contents of "DsdtPatchesAsusPrimeX299.txt". Choose "Apply", then "Close" and save your new DSDT to EFI / CLOVER / ACPI / patched. That's it. Edit: How can I convert completely PC00 PC0 to PCI0? Edit2: If there is something to improve, then do it. DsdtPatchesAsusPrimeX299.txt 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 3, 2018 Share Posted March 3, 2018 x299 dont load smbus x299 dont load lpc, is a pmcr/ppmc devices for rename use patches in config.plist, some SSDTs have same devices and hotpatches rename in all tables and avoid problems 1 Link to comment Share on other sites More sharing options...
apfelnico Posted March 3, 2018 Share Posted March 3, 2018 OK, I have updated: Please note, these patches are for the ASUS PRIME X299 DELUXE motherboard. DsdtPatchesAsusPrimeX299DELUXE.txt Link to comment Share on other sites More sharing options...
Matthew82 Posted March 17, 2018 Share Posted March 17, 2018 (edited) There are new bios (1201) for Asus Prime x299 Deluxe. https://www.asus.com/pl/Motherboards/PRIME-X299-DELUXE/HelpDesk_BIOS/ If someone won't I attach already patched version. https://drive.google.com/file/d/17SSp30g2KXRXkD1MLwXXISJphmjzuUO-/view?usp=sharing Edited March 17, 2018 by Matthew82 Link to comment Share on other sites More sharing options...
macandrea Posted March 24, 2018 Share Posted March 24, 2018 New bios (1301) has the option the unlock msr 0xe2 under advanced/CPU. So no need to patch bios / use kernel patches anymore. Link to comment Share on other sites More sharing options...
KGP-iMacPro Posted March 24, 2018 Author Share Posted March 24, 2018 (edited) 1 hour ago, macandrea said: New bios (1301) has the option the unlock msr 0xe2 under advanced/CPU. So no need to patch bios / use kernel patches anymore. Fantastic news. They finally did what I asked for ... what about TSCSync? Did they also fix the Skylake-X TSC issue, or is VoodooTSCSync.kext required without any further BIOS patching? Edited March 24, 2018 by KGP-iMacPro Link to comment Share on other sites More sharing options...
macandrea Posted March 24, 2018 Share Posted March 24, 2018 No they did not... we still need the TSCSync kext a huge step forward for me anyway, because I need to remove the battery off my mainboard whenever I need to use the bios flashback feature... otherwise it doesn’t work (I’ve seen online I’m not the only one with this issue). Link to comment Share on other sites More sharing options...
SammlerG Posted March 25, 2018 Share Posted March 25, 2018 (edited) New bios is working perfect now for 2 days. No patches done, i only use TSCSync.kext and hat to and npci=0x2000 boot flag. Edited March 25, 2018 by SammlerG Link to comment Share on other sites More sharing options...
KGP-iMacPro Posted March 25, 2018 Author Share Posted March 25, 2018 3 hours ago, SammlerG said: New bios is working perfect wow for 2 days. No patches done, i only use TSCSync.kext and hat to and npci=0x2000 boot flag. @interferenc, what Asus is exactly missing in also solving the Skylake-X TSCSync problem? Could you post a proposal that I could send to ASUS. It would be very handy to make any BIOS patch absolete by factory defaults. Link to comment Share on other sites More sharing options...
joedm ru Posted March 25, 2018 Share Posted March 25, 2018 15 minutes ago, KGP-iMacPro said: Could you post a proposal that I could send to ASUS. When you contact ASUS please ask them to provide such fixes not only for Prime Deluxe motherboard, but for all their LGA2066-based motherboards. Thanks. Link to comment Share on other sites More sharing options...
KGP-iMacPro Posted March 30, 2018 Author Share Posted March 30, 2018 New e-mail to ASUS Dear Olga, Many thanks for providing the possibility of a manual MSR 0xE2 register unlock within PRIME-X299-DELUXE-ASUS-1301.CAP. However, please fix the unsynchronised TSCs of Skylake-X cores on boot and wake from S3 at your earliest convenience. Something in the BIOS still screws them up, as it is clearly seen by the none null state of the TSC_ADJUST register. Many thanks in advance, KGP Update to macOS High Sierra 10.13.4 (17E199) Changes, issues and limitations: 1.) New USB port Limit Patch Name* Find*[Hex] Replace* [Hex] Comment AppleUSBXHCI 837d940f 0f839704 0000 837d941a 90909090 9090 10.13.4 USB Port Limit Patch by PMHeart 2.) No Nvidia Web Driver yet released. Use patched Web Driver xxx.106 or xxx.159 instead. 3.) Nvidia HDAU digital audio not working - no PCI driver installed despite an else correct HDAU SSDT PCI device implementation. Enjoy and have fun, Link to comment Share on other sites More sharing options...
corint1 Posted March 30, 2018 Share Posted March 30, 2018 need to update link to download HS in first post ? for 13.4 ? Link to comment Share on other sites More sharing options...
surfinchina Posted March 30, 2018 Share Posted March 30, 2018 3 hours ago, corint1 said: need to update link to download HS in first post ? for 13.4 ? It's in the App Store. Final release. Link to comment Share on other sites More sharing options...
corint1 Posted March 30, 2018 Share Posted March 30, 2018 5 minutes ago, surfinchina said: It's in the App Store. Final release. download only 15 Mb... Link to comment Share on other sites More sharing options...
surfinchina Posted March 30, 2018 Share Posted March 30, 2018 6 minutes ago, corint1 said: download only 15 Mb... There used to be a way to fix that and download the full install. Link to comment Share on other sites More sharing options...
Guest Posted March 30, 2018 Share Posted March 30, 2018 For HDMI/DP Nvidia audio implementation check APPLEALC thread or old 10.13.4 beta thread here Link to comment Share on other sites More sharing options...
corint1 Posted March 30, 2018 Share Posted March 30, 2018 1 hour ago, fabiosun said: For HDMI/DP Nvidia audio implementation check APPLEALC thread or old 10.13.4 beta thread here must patch AppleHDAController.kext from AppleHDA.kext ... but I dont know how ... I change AppleHDAController.kext from old version 13.3 and it is work ... Link to comment Share on other sites More sharing options...
Guest Posted March 30, 2018 Share Posted March 30, 2018 (edited) 14 minutes ago, corint1 said: must patch AppleHDAController.kext from AppleHDA.kext ... but I dont know how ... I change AppleHDAController.kext from old version 13.3 and it is work ... You have to way to do it via config.plist (search in your ioreg device id for HDAU and patch it as @FredWst have said in beta 10.13.4 or use a AppleAlc kext with your device injected in it (see appleALC thread for this roll back as you did is fine too Edited March 30, 2018 by Guest added links Link to comment Share on other sites More sharing options...
KGP-iMacPro Posted March 30, 2018 Author Share Posted March 30, 2018 2 hours ago, corint1 said: download only 15 Mb... The Appstore update installer package to 10.13.4 has 2.5GB! No idea where you take the 15 MB from... Link to comment Share on other sites More sharing options...
corint1 Posted March 30, 2018 Share Posted March 30, 2018 2 minutes ago, KGP-iMacPro said: The Appstore update installer package to 10.13.4 has 2.5GB! No idea where you take the 15 MB from... some hours ago , I download only 15 Mb ...twice ... whatever ... can you change links for new 13.4 ?... tkx... Link to comment Share on other sites More sharing options...
Loloflat6 Posted March 30, 2018 Share Posted March 30, 2018 (edited) The full package installer 10.13.4 has 5.22 GB ( i had downloaded it with no issue ) Edited March 30, 2018 by Loloflat6 Link to comment Share on other sites More sharing options...
corint1 Posted March 30, 2018 Share Posted March 30, 2018 1 minute ago, Loloflat6 said: The full package installer 10.13.4 has 5.22 GB ( i had downloaded it with any issue ) from where ? Link to comment Share on other sites More sharing options...
Loloflat6 Posted March 30, 2018 Share Posted March 30, 2018 If you had never downloaded a previous version you may download the full package from appstore by the page on High Sierra. Link to comment Share on other sites More sharing options...
Guest Posted March 30, 2018 Share Posted March 30, 2018 4 minutes ago, corint1 said: from where ? in my case from apple store..downloaded from a beta 7 osx disk Link to comment Share on other sites More sharing options...
Recommended Posts