Funky frank Posted February 16, 2018 Share Posted February 16, 2018 So post your aptiodumps now using the boot arg "-aptiodump" ? Link to comment Share on other sites More sharing options...
Toooorch Posted February 16, 2018 Share Posted February 16, 2018 #890 try to see if you find something useful in EFI I have attached in thread above Thanks for pointing me to your EFI! Almost same as I have. Tried to use your whole EFI (only had to add NVMe support) and I was able to pass the ******* screen but then on load, it stucks on "HID: Legacy shim 2" and then something like kernel panic on "Still waiting for root device". I am sure that this "progress" was caused by the older version of Clover because with the newer version I am not able to pass the ***** screen by anyway. My clover version is now Clover_v2.4k_r4114 and for example, Clover_v2.4k_r4220 is already bad for me. It is weird, don't know how to debug it or which direction I should go. I can't even update to newer version of macOS (10.13 17A365+) because it requires newer clover I think because otherwise, it has the "Still waiting for root device" issue. Added also my EFI for example on macOS 10.13 17A365 and clover 4114 it works perfectly and it is very stable. EFI.zip Link to comment Share on other sites More sharing options...
bronxteck Posted February 16, 2018 Share Posted February 16, 2018 looks like your having issues either with usb or the nvme drive detection if your getting still waiting for root error. have you tried 10.13.x it should have native nvme support. also try different USB ports if the error is coming from not finding the usb installer. if the error is from booting your hdd then look into nvme issues. Link to comment Share on other sites More sharing options...
Hoeman Posted February 17, 2018 Share Posted February 17, 2018 @Hoeman Tested all ports with external hd All is fine No tested with external gpu or other things To be perfectly clear, there are only 2 ports (I'm excluding the mini-DP in) for external devices, the USB-C THUNDERBOLT 3 port and the USB 3.1 GEN 2 TYPE A port. Are you saying that when you plug a typical USB TYPE A device into the USB 3.1 GEN 2 TYPE A port, it is mounted and detected? Link to comment Share on other sites More sharing options...
mitch_de Posted February 17, 2018 Share Posted February 17, 2018 INFO: R15 works on my GA Z77 Mainboard. (Sierra & HS). 3 Link to comment Share on other sites More sharing options...
just_tarable Posted March 2, 2018 Share Posted March 2, 2018 R15 Works on my Lenovo Yoga 720 13" but only if Intel SGX and Intel Platform Trust are disabled in the bios. It's not a huge deal but it kills the fingerprint reader under Windows which I gotta say is really handy. Looking at the memory map it reduces the ~464MB of memory at 0x0000000000100000 to ~288MB which is well under the 384MB it wants. The next largest free block is at 0x0000000100000000 and is ~7200MB. Is there any way around this or is that just the way it's going to be? Platform Trust and SGX disabled: https://pastebin.com/a0dWY3SX Platform Trust and SGX enabled: https://pastebin.com/dWaSyviv Thank you for all your hard work Link to comment Share on other sites More sharing options...
vit9696 Posted March 2, 2018 Author Share Posted March 2, 2018 Hi, you may try slide=0, I guess. I cannot promise but 288 MB may be enough for macOS to boot. If it works, perhaps, I should change the code to pick a slide for the largest chunk of memory after it fails to find any (definitely) working one after all. Link to comment Share on other sites More sharing options...
just_tarable Posted March 2, 2018 Share Posted March 2, 2018 I remember it just crashing to the system boot menu with slide=0, is it checking the size of the memory region being 384MB and bailing out if it's not? Link to comment Share on other sites More sharing options...
vit9696 Posted March 2, 2018 Author Share Posted March 2, 2018 Then you are most likely out of luck, I am afraid. The logic was not to pass slide values if no valid one was found. So it was entirely up to macOS which slide would be chosen in this case. I modified it to fallback to the slide with the largest memory chunk available in the latest commit. You may try, but from your report I guess it won't help unfortunately.https://github.com/vit9696/AptioFixPkg/commit/76ae0a9380e25cc7fedbfc8cd2d9cd9bf5e86665 1 Link to comment Share on other sites More sharing options...
just_tarable Posted March 2, 2018 Share Posted March 2, 2018 Thank you for the patch, it unfortunately caused a reboot during kernel patching with the reduced memmap but maybe it will work for someone else. Still working with platform trust and sgx disabled. Link to comment Share on other sites More sharing options...
vit9696 Posted March 2, 2018 Author Share Posted March 2, 2018 Well, I hope it works for someone too. Now that you said reduced memory map, is there any chance it does not fit here: https://github.com/vit9696/AptioFixPkg/blob/master/Platform/AptioMemoryFix/BootFixes.c#L46 You could try increasing to 128, although so far it was not necessary to anyone. I added the notes regarding TB, SGX and stuff to the readme. In case anyone has the same issue as you did, the actions to try will at least be known. 1 Link to comment Share on other sites More sharing options...
just_tarable Posted March 2, 2018 Share Posted March 2, 2018 I've been using the docker setup provided by Pavo earlier in the thread which is actually the first time I've ever used it so I'll have to look into how to work it into that somehow. Link to comment Share on other sites More sharing options...
d5aqoep Posted March 18, 2018 Share Posted March 18, 2018 With Gigabyte Z370N Wifi mini-ITX motherboard, none of the 3 versions of AptIOfix work when used with latest F3 Bios. However, all of them work on F1 bios. It may have something to do with changed memory allocation following Spectre and Meltdown microcode updates. Link to comment Share on other sites More sharing options...
redflame Posted March 20, 2018 Share Posted March 20, 2018 I'm getting kernel panics with the NVIDIA Web Driver and AptioMemoryFix. I'm not at my machine at the moment, but the panics were related to the driver trying to read/write NVRAM. Reverting to OSXAptioFix2 resolves the issue. I'm on a Gigabyte Z97M-D3H motherboard with an i5-4670K. Link to comment Share on other sites More sharing options...
redflame Posted March 20, 2018 Share Posted March 20, 2018 23 minutes ago, redflame said: I'm getting kernel panics with the NVIDIA Web Driver and AptioMemoryFix. I'm not at my machine at the moment, but the panics were related to the driver trying to read/write NVRAM. Reverting to OSXAptioFix2 resolves the issue. I'm on a Gigabyte Z97M-D3H motherboard with an i5-4670K. This may be of note as well, but I have integrated HD4600 graphics enabled with a connectorless ig-platform-id. Reading through the thread, I see there are issues with AptioMemoryFix and IG being enabled with a dedicated GPU. Link to comment Share on other sites More sharing options...
LockDown Posted April 11, 2018 Share Posted April 11, 2018 what is the latest revision? R16 is what i have Link to comment Share on other sites More sharing options...
RehabMan Posted April 20, 2018 Share Posted April 20, 2018 On 4/10/2018 at 11:18 PM, ellaosx said: what is the latest revision? R16 is what i have R16 is latest as of today: NUC6i7KYK:aptiofix.git rehabman$ git pull Already up to date. NUC6i7KYK:aptiofix.git rehabman$ grep REVISION Include/Protocol/AptioMemoryFixProtocol.h #define APTIOMEMORYFIX_PROTOCOL_REVISION 16 Link to comment Share on other sites More sharing options...
telepati Posted April 20, 2018 Share Posted April 20, 2018 can somebody upload latest version? Link to comment Share on other sites More sharing options...
Hackmac101 Posted April 20, 2018 Share Posted April 20, 2018 Clover installer has the newest version. But here: Archive.zip 1 Link to comment Share on other sites More sharing options...
vandroiy2012 Posted April 20, 2018 Share Posted April 20, 2018 2 hours ago, telepati said: can somebody upload latest version? AptioMemoryFix.efi.zip 1 Link to comment Share on other sites More sharing options...
Gymnae Posted May 11, 2018 Share Posted May 11, 2018 Using a Gigabyte H370 Rev 1 here. If I change DVMT pre alloc from 64MB to 128MB, then Aptiomemoryfix cannot allocate enough pages. I give it a custom slide value for an areas in my memmap big enough with slide=157 - but it simply ignores that slide value and still complains. I'm running the version that comes with clover 4449 Link to comment Share on other sites More sharing options...
apianti Posted May 11, 2018 Share Posted May 11, 2018 I have a ASRock Z77-Extreme4 and setting the DVMT to more than 96MB does not work for any OS, and setting it higher than 128MB does not even work for the firmware, I have to hardware reset the CMOS/NVRAM. Also if the auto slide selector does not give you a valid slide, setting the slide manually is probably not going to do anything different... It's far more likely that your memory is getting too fragmented by memory allocations. How much free memory under 4GB do you actually have if you add it all up? Link to comment Share on other sites More sharing options...
bronxteck Posted May 11, 2018 Share Posted May 11, 2018 Gymnae did you follow the readme especially the third point about "Above 4G Decoding" Link to comment Share on other sites More sharing options...
Gymnae Posted May 12, 2018 Share Posted May 12, 2018 17 hours ago, bronxteck said: Gymnae did you follow the readme especially the third point about "Above 4G Decoding" Yes, I did. I also tried with that option turned on in BIOS and then the system won't boot, it stalls after initializing the dGPU or iGPU (I tried both) so I turned it off again. 18 hours ago, apianti said: I have a ASRock Z77-Extreme4 and setting the DVMT to more than 96MB does not work for any OS, and setting it higher than 128MB does not even work for the firmware, I have to hardware reset the CMOS/NVRAM. Also if the auto slide selector does not give you a valid slide, setting the slide manually is probably not going to do anything different... It's far more likely that your memory is getting too fragmented by memory allocations. How much free memory under 4GB do you actually have if you add it all up? If I can believe the memmap, then it should be more pages than it tries to allocate. But having said that, am I correct that memmap shows me memory below 4GB if above 4G decoding is turned off? Link to comment Share on other sites More sharing options...
vit9696 Posted May 12, 2018 Author Share Posted May 12, 2018 Hello, Firstly, it is not AptioMemoryFix allocating pages but boot.efi. Secondly, slide argument is not ignored, it is just the value that is improper. You may set 0 here and rebuild AptioMemoryFix to see the actually set slide in ioreg in IODevice: https://github.com/vit9696/AptioFixPkg/blob/master/Platform/AptioMemoryFix/Config.h#L52 Thirdly, the memory map UEFI Shell command does not show the memory map as it changes over boot.efi loading process. It allocates quite a lot, and even AptioMemoryFix cannot catch it all. To get a more reliable memory map you could try using -aptiodump boot argument after setting 1 here: https://github.com/vit9696/AptioFixPkg/blob/master/Platform/AptioMemoryFix/Config.h#L76 But I would say even that is not perfect. Link to comment Share on other sites More sharing options...
Recommended Posts