Jump to content

Natit new development version with ATI and nVidia dual screen

dm_webd

By dm_webd,
in Natit

 Share
803 posts in this topic

Recommended Posts

blackandblue
blackandblue
Posted
Posted
okay to help out i guess all the other 7300GS and 7300GT users are missing out on is dual screen. I guess i just cracked it...

 

Here are my working kexts: Grab them Here

etc etc

 

Anyhow, thanks DiaboliK, your kexts and $115AU got me working dual screen and tv out on my hackintosh! I bought an ASUS 256mb EN7300GS, DVI and VGA + Tv out. It works perfectly with your kexts! ;)

 

oh yeah forgot to add it worked in these combinations for me:

VGA + TV out

DVI(using vga adaptor) + TV out

Or VGA + DVI using a real DVI cable, not a DVI to VGA adaptor, then it only works on the monitor you plug in first.

Link to comment
Share on other sites
elRey
elRey
Posted
Posted

you better do a search for x1600xt

then you will find that there is no way for dual display with x1600xt

Link to comment
Share on other sites
yujie
yujie
Posted
Posted

Hello. I have a Toshiba Tecra M2 Laptop, with Geforce FX Go 5200 graphic card (id: 0x032810de), and running 10.4.8, which is installed by using Jas 10.4.8 Intel AMD SSE2 SSE3 DVD. The only thing I want is to have CI/QE enabled with my internal LCD (I don't need dual-screen).

 

I found that: if Titan / Natit is installed, there is a line in log file shows the display device was 

NVDA,Display-A: vram [00000000:01000000]

and then the screen turns to black. (System still running)

 

but if I don't use them, the system can be displayed but no support for CI / QE. And this time, the device is 

VGA: vram [d0000000:10000000]

 

Is this a problem?

 

I did a lot of test to find what was wrong. Detailed information can be seen here:

 

http://forum.insanelymac.com/index.php?showtopic=46340

 

My hardware: Geforce FX Go 5200 (0x0328 10de), Intel 855 Chipset, Centrino 1.6Ghz(only SSE2)

 

Thanks anyone can help me.

 

My log file and ioreg:

system.log.zip

ioreg.txt.zip

Link to comment
Share on other sites
achtung
achtung
Posted
Posted

Hi there,

 

I use Natit_Uni_1.0.pkg with my ATI X1300 Pro PCIe / DVI and everything works fine. My resolution is 1680x1050 an I can play e.g. Quicktime Trailer (720p) with no problem.

But the "SystemProfiler" says:

**************************************************************************

ATI Radeon X1300 Series:

 

Chipset Model: ATI Radeon X1300 Series

Type: Display

Bus: PCIe

VRAM (Total): 256 MB

Vendor: ATI (0x1002)

Device ID: 0x7183

Revision ID: 0x0000

Displays:

DELL 2005FPW:

Resolution: 1680 x 1050 @ 60 Hz

Depth: 32-bit Color

Core Image: Not Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

Display:

Status: No display connected

**************************************************************************

 

I edited my /System/Library/Extensions/ATIRadeonX1000.kext/Info.plist but that doesn't help, obviously!

 

So here is my kernel log:

**************************************************************************

Natit: Starting.

device-id: 0x71A3

Natit: Found device

Natit: Found device name

Natit: Setting device_type=ATY,CarettaParent

Natit: Setting @1,device_type=display

Natit: Setting @0,compatible=ATY,Caretta

Natit: Setting @0,display-connect-flags=0x00000400

Natit: Setting @1,compatible=ATY,Caretta

Natit: Setting @1,display-connect-flags=0x00000400

Natit: Setting @1,name=ATY,Caretta

Natit: Setting @0,name=ATY,Caretta

Natit: Setting @0,device_type=display

Natit: Setting model=ATI Radeon X1300 Series Secondary

display: family specific matching fails

Natit: Starting.

device-id: 0x7183

Natit: Found device

Natit: Found device name

Natit: Setting device_type=ATY,CarettaParent

Natit: Setting @1,device_type=display

Natit: Setting @0,compatible=ATY,Caretta

Natit: Setting @0,display-connect-flags=0x00000400

Natit: Setting @1,compatible=ATY,Caretta

Natit: Setting @1,display-connect-flags=0x00000400

Natit: Setting @1,name=ATY,Caretta

Natit: Setting @0,name=ATY,Caretta

Natit: Setting @0,device_type=display

Natit: Setting model=ATI Radeon X1300 Series

ATY,Caretta: Not usable

ATY,Caretta: Not usable

**************************************************************************

 

Any suggestions? VLC dosn't work because of the CI/QE problem, right?

 

Thank you,

Marc

Link to comment
Share on other sites
  • 2 weeks later...
u1m2
u1m2
Posted
Posted
Anyone else get a blue screen after using Neo's 1.0 installer for Natit?

 

I have a X1900XT with device id 7249, but I get no dice. Maybe I need to edit something or should the installer be picking up what card I have and making the appropriate changes?

 

The card is a HIS X1900XT 512mb (IceQ3) Any suggestions would be helpful. Thanks! and keep up the good work :)

 

(I get the same result whether I use dvi or a vga adapter)

 

edit:

 

I should note that I'm using JaS 10.4.8 Intel AMD SSE2 SSE3

 

I get the same result with both of the x1000 series driver choices on the install disk, also.

 

 

I have an Asus X1900CF 512MB and also using 10.4.8 JaS, I could only get it to work with JCCool. You might want to try that if Natit doesn't work for you, don't know why but natit doesn't work for me either (tried all kexts manually, and also diabolik's installers.

Link to comment
Share on other sites
snowsquirrel
snowsquirrel
Posted
Posted

Diabolik:

 

I have an MSI 7300GS PCIe card, and dual vga/LCD's (one is on a DVI->VGA adapter). I copied Diabolik's three kext's and rebooted. I don't think I should have to edit the Info.plist files, as my devid 0x1fd already shows up in the GeForce.kext.

 

During the boot, After the Natit: messages, I get a few messages saying:

kextd_watch_volumes: couldn't setup diskarb sessions, diskarb not ready, try again soon.

Then IOKitWaitQuiet() timed out

Directory service: Launched version 2.1

Login Window Application Started

 

And then everything just hanges there.

 

I am on 10.4.8/8.8.1/AMD.

 

I should mention that I can't even get Natit or Titan to work on a single display. Though without them, I do at least get a gui, no kext loaded, no QE/CI, dual monitor.

 

Any suggestions?

Link to comment
Share on other sites
DiaboliK
DiaboliK
Posted
Posted
Diabolik:

 

I have an MSI 7300GS PCIe card, and dual vga/LCD's (one is on a DVI->VGA adapter). I copied Diabolik's three kext's and rebooted. I don't think I should have to edit the Info.plist files, as my devid 0x1fd already shows up in the GeForce.kext.

 

During the boot, After the Natit: messages, I get a few messages saying:

kextd_watch_volumes: couldn't setup diskarb sessions, diskarb not ready, try again soon.

Then IOKitWaitQuiet() timed out

Directory service: Launched version 2.1

Login Window Application Started

 

And then everything just hanges there.

 

I am on 10.4.8/8.8.1/AMD.

 

Any suggestions?

 

black screen? bluescreen with mouse?

 

or just login window started text?

Link to comment
Share on other sites
snowsquirrel
snowsquirrel
Posted
Posted

Just the text.

 

During the uninstall, I borked something, so now I can't boot to GUI even without the Natit stuff. I am in the middle of clean re-install. So it will be an hour or so before I can actually test any suggestions.

 

I just read here (http://forum.insanelymac.com/index.php?showtopic=47783) that proteo had his eVGA version of this card (7300GS) work out of the box with Natit 1.0, I am assuming that means without editing any Info.plist files. So it seems odd that my MSI version of the card doesn't work. All the ID's seem to be the same.

 

~S

Link to comment
Share on other sites
snowsquirrel
snowsquirrel
Posted
Posted

Ok,

 

Back up and running. Just tried the 1.0 universal installer.

This is what I get from profiler:

 

GeForce 7300 GS:

 

Chipset Model: GeForce 7300 GS

Type: Display

Bus: PCIe

VRAM (Total): 256 MB

Vendor: NVIDIA (0x10de)

Device ID: 0x01df

Revision ID: 0x00a1

Displays:

Display:

Resolution: 1024 x 768

Depth: 32-bit Color

Core Image: Not Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

Display:

 

 

This is my dmesg:

display: family specific matching fails

Natit: Starting.

Natit: Iterating IORegistry.

Natit: Match found.

Natit: Setting device_type=NVDA,Parent

Natit: Setting @0,device_type=display

Natit: Setting @1,device_type=display

Natit: Setting @0,compatible=NVDA,NVMac

Natit: Setting @1,compatible=NVDA,NVMac

Natit: Setting @0,name=NVDA,Display-A

Natit: Setting @1,name=NVDA,Display-B

Natit: Setting @0,fboffset=0x20000

Natit: Setting model=GeForce 7300 GS

rtl_r1000_nic_ext: Ethernet address 00:40:f4:be:e1:28

IONetworkController::enable

NVDA,Display-B: Not usable

 

Next I added tried the Natit.DualV2. And I am back to the "Login Window Application Started" text, and hangs. No mouse, no black nor blue screen. Just text.

Link to comment
Share on other sites
mac.nub
mac.nub
Posted
Posted

I tried "Natit_ATIauto.kext.zip" for my HIS ATI Radeon x1650 Pro, it detected it ok and allowed me to change resoultion, CI, QE, Q2E etc. weren't working but I never edited any values (I forgot how to find out which ones I needed! (and also what file to edit!)) so I assume it would have worked if I had, it's also worth noting this was using DVI and that was working fine.

 

Then I found a Pre-Config'd x1650 Pro AGP driver tried that and everything was enabled to used that instead (because i'm really lazy at heart :))

Link to comment
Share on other sites
wladix666
wladix666
Posted
Posted

How to edit natit.kext?

Can anyone explain how to add my device id (02e0) to natit.kext?

This Site says:

10.4.8/8.8.1: AMD Final SSE2 SSE3 from Piratebay but without NV40 and X1000 , then installed latest Natit. 6600 TDH works perfectly, 7600GT need to edit Natit.kext and NV40 to include the device ID (02e0). Dual display works flawlessly on 6600, but on 7600 GT, digital output doesn't work, only works by using a convertor making both output analogue, which is bad for my cheap LCD display.

But how?

 

sorry for my English and that am new to mac osx ;=)

 

wladix666

Link to comment
Share on other sites
powee
powee
Posted
Posted

hi!

 

i reinstalled my system and my qe/ci support went off ;)

 

I cant remember what drivers i used, but i had qe/ci support (good flurry, seeing films, etc), and dual view also (with tv too).

 

My card is 6600gt dev id: 0140 ven id: 01de

 

Natit working good with dual monitor, but qe/ci went off :P

 

Please help me! Maybe im so tired, so i go to sleep now maybe i will have a dream about how to solve this thing :P

 

powee

 

solved

Link to comment
Share on other sites
alexanderh4
alexanderh4
Posted
Posted

ust Wanted to let you guys know you are doing a geat job. I finally got Intel 955XBX Motherboard with Geforce 7300 Video Card using Natit 1.0 i get the following specs:

 

Chipset Model: GeForce 7300 GT

Type: Display

Bus: PCIe

VRAM (Total): 256 MB

Vendor: NVIDIA (0x10de)

Device ID: 0x0393

Revision ID: 0x00a1

Displays:

Sceptre X20WG-Naga:

Resolution: 1680 x 1050 @ 60 Hz

Depth: 32-bit Color

Core Image: Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Display:

Status: No display connected

 

Laste but not least i ginally got the sound working by downloading the following file from this thread: I have a Sigmatel 9221D VEN 8384 DEV 7683 i belieeve it two channel , BUT IT sound!!! :lol:

 

http://forum.insanelymac.com/index.php?sho...mp;#entry230428

 

Post 158 username bofors

 

BTW i am using 10.4.8 with Kernel 8.8.1

 

If you have any question PM me p_up.gifp_middot.gifp_report.gif

p_delete.gifp_middot.gifp_edit.gifp_middot.gifp_mq_add.gif

Link to comment
Share on other sites
mac2pc
mac2pc
Posted
Posted

Hi ALL

gurus and developers

I have problem with nv 5200 that do not support all type of monitors

the same machine with NV5200 accept sumsung syncmater 100% and other monitors still black or black with 90° mouse cursor

i have tried diff natit ver still the same problem

how to force the system to accept any monitor

thanks

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...