Jump to content

Natit new development version with ATI and nVidia dual screen

dm_webd

By dm_webd,
in Natit

 Share
803 posts in this topic

Recommended Posts

greenman100
greenman100
Posted
Posted

I downloaded Natit, dropped it int eh extensions folder, and rebooted.

 

I get resolution change, but no QE/CI.

 

I have a Sapphire x1600Pro.

 

Any ideas?

 

Am running 10.4.8 kernel and kexts.

 

 

Nov 16 17:21:21 localhost kernel[0]: Natit: Starting.
Nov 16 17:21:21 localhost kernel[0]: device-id: 0x71E2
Nov 16 17:21:21 localhost kernel[0]: Natit: Found device
Nov 16 17:21:21 localhost kernel[0]: Natit: Found device name
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting device_type=ATY,WormyParent
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @1,device_type=display
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @0,compatible=ATY,Wormy
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @0,display-connect-flags=0x00000400
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @1,compatible=ATY,Wormy
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @1,display-connect-flags=0x00000400
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @1,name=ATY,Wormy
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @0,name=ATY,Wormy
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @0,device_type=display
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting model=ATI Radeon X1600 Series Secondary
Nov 16 17:21:21 localhost kernel[0]: display: family specific matching fails
Nov 16 17:21:21 localhost kernel[0]: Natit: Starting.
Nov 16 17:21:21 localhost kernel[0]: device-id: 0x71C2
Nov 16 17:21:21 localhost kernel[0]: Natit: Found device
Nov 16 17:21:21 localhost kernel[0]: Natit: Found device name
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting device_type=ATY,WormyParent
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @1,device_type=display
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @0,compatible=ATY,Wormy
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @0,display-connect-flags=0x00000400
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @1,compatible=ATY,Wormy
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @1,display-connect-flags=0x00000400
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @1,name=ATY,Wormy
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @0,name=ATY,Wormy
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting @0,device_type=display
Nov 16 17:21:21 localhost kernel[0]: Natit: Setting model=ATI Radeon X1600 Series
Nov 16 17:21:21 localhost kernel[0]: AppleHDA.kext failed to load: unable to locate 'layout-id' property.
Nov 16 17:21:21 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[49]: starting
Nov 16 17:21:21 localhost memberd[56]: memberd starting up
Nov 16 17:21:21 localhost lookupd[60]: lookupd (version 369.6) starting - Thu Nov 16 17:21:21 2006
Nov 16 17:21:21 localhost DirectoryService[61]: Launched version 2.1 (v353.5)
Nov 16 17:21:23 localhost kernel[0]: rtl_r1000_nic_ext: Ethernet address 00:e0:4d:05:b1:e6
Nov 16 17:21:23 localhost configd[53]: No AirPort Driver found.
Nov 16 17:21:23 localhost lookupd[76]: lookupd (version 369.6) starting - Thu Nov 16 17:21:23 2006
Nov 16 17:21:23 localhost kernel[0]: ATY,Wormy: Not usable
Nov 16 17:21:23 localhost diskarbitrationd[55]: disk0s1	ntfs	 00000000-0000-0000-0000-000000000000 Windows2000			 [not mounted]
Nov 16 17:21:23 localhost kernel[0]: ATY,Wormy: Not usable

Link to comment
Share on other sites
asapreta
asapreta
Posted
Posted
Even in the first post would be fine. I looked for a while.

 

It depends on the card, would be better to put the IDs of the cards already on the kext on that post too.

 

 

Mine is already there and doesn't need editing.

Link to comment
Share on other sites
bighoffa
bighoffa
Posted
Posted

I have been following this for quite a while. The only thing that has prevented me from completely switching to OSX has been the inability to use dual monitors. I have the following setup and cannot for the life of me figure out how to get a second monitor recognized:

 

AMD Sempron 3100+ with 128mb nVidia Ultra 5200 FX AGP running 10.4.7 JaS + 10.4.8 JaS AMD combo update from beta AMD install dvd. I have put K19-rc12 Semthex kernel and Paulicat's SMBios.kext in. I have installed Natit, Natit_edited, and Natit_auto hoping that one of them will help me. I have placed the EDID values obtained from SwitchResX of my monitors into Info.plist for Natit.kext using Plist Editor Pro (It swaps byte order when I paste it, though --- not sure if this is normal). I have tried using AGPGart to make the card recognized as AGP and without AGPGart.

 

I am able to get full support (QE/CI + resolution change) of the vga connector, but cannot get the DVI port to work at all. I have tried using straight DVI, and a DVI to analog connector without success. The screens are mirrored during boot, but the DVI port goes black at loginwindow.

 

-EDIT-

Using the Nvidia Accelerated Kexts from the demon (See later post on page 13), has allowed me to use the DVI port if it is the only port plugged in. I still cannot get both ports to be recognized at the same time.

 

I am just not sure what else to try -- are there anymore edits that I need to make with other kexts? Thanks in advance for any help.

Link to comment
Share on other sites
Roei
Roei
Posted
Posted

Hey anybody :gun:

 

just tried it on ati x300 (rv370) [0x5b60,0x5b70] with natit autodetection...

my card is recognized well but after that it says something like: ".....login window application started" and nothing happens after that..

 

i'm using jas 10.4.6 (i already have CI/QE support)

amd 64 3000+ (sse2)

 

i just put the natit.kext in .../extensions....

 

what i'm doing wrong? :compress:

Link to comment
Share on other sites
joblo10
joblo10
Posted
Posted

This works great on my 7600GT AGP! Thanks for your work!

 

I only have one problem, dashboard crashes whenever I try to drop a new widget. Instead of making the ripple effect, the whole dashboard freezes for 15-20 seconds, in the better scenario, but most of the time it just crash the windowserver and I have to reset the computer. Does any one else experienced this issue?

 

CoreEndianFlipData: error -4940 returned for rsrc type DITL (id 432, length 282, native = no)

Nov 17 11:38:34 joes-computer crashdump[328]: WindowServer crashed

CoreEndianFlipData: error -4940 returned for rsrc type DITL (id 332, length 278, native = no)

CoreEndianFlipData: error -4940 returned for rsrc type DITL (id 432, length 282, native = no)

2006-11-17 11:38:35.193 DashboardClient[327] setSearchComboBox...

Nov 17 11:38:35 joes-computer crashdump[328]: crash report written to: /Library/Logs/CrashReporter/WindowServer.crash.log

 

I have include my crash reporter log.

windowservercrash.rtf

Link to comment
Share on other sites
bofors
bofors
Posted
Posted
It depends on the card, would be better to put the IDs of the cards already on the kext on that post too.

Mine is already there and doesn't need editing.

 

I can do this if you give me a list of such cards, but I think this thread is getting messy and perhaps a new one should be created just for ATI issues.

Link to comment
Share on other sites
asapreta
asapreta
Posted
Posted
I can do this if you give me a list of such cards, but I think this thread is getting messy and perhaps a new one should be created just for ATI issues.

 

 

You have a point here (even two ). I´ll list them and post here.

Link to comment
Share on other sites
etc
etc
Posted
Posted

I can't install Natit =( (tried Natit.kext and Natit ATI auto)

When the system boots up it throws an error message "System extension cannot be used", "The system extension "/System/Library/Extensions/Natit.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update"

 

What's wrong? Also i've enabled QE/CI by editing AtiRadeonX1000.kext (but mouse tearing :) )

 

How i install Natit:

1) Copied Natit.kext in \System\Library\Extensions\

2) Removed 2 kext cache files

3) Repaired file permissions (but it displays nothing repair information - only that disk check and repair completed)

4) Reboot

Anything is wrong? What i missed? Some Terminal commands?

 

My system configuration below in signature.

Link to comment
Share on other sites
Guest bikedude880
Guest bikedude880
Posted
Posted

Yup, there are a couple terminal commands (well, one really) that you missed. They are listed on Omni's site.

 

Go into the terminal, browse to /System/Library/Extensions and type 

sudo chown -R root:wheel Natit.kext

 

Remove Extensions.kextcache and Extensions.mkext and reboot. Should work.

Link to comment
Share on other sites
VasH
VasH
Posted
Posted
I do this, and get a blank blue screen.

 

grrr.

 

 

Have you a x1600pro?

 

If yes, you have to use ATINDRV.kext and IONDRVSupport.kext from version 10.4.5

 

You can download the 10.4.5 update (the one for intelmac) from apple and extract only those 2 files.

Link to comment
Share on other sites
etc
etc
Posted
Posted

greenman100, i do this and get it works! =)

 

bikedude880, big thanks!

 

But, i get a black screen (can't plug external monitor right now), but system works fine - power off button, then enter and system shuts down.

 

Now, i'll try to use ATI auto (right now i've tested Natit.kext, that's maybe a mistake)

 

Oh, don't want to offtop, but, how i can remove not empty directory with BSD commands? I'm a little bit noob ;) (Before this post i deleted Natit.kext only after deleted all dirs and files in them)

Link to comment
Share on other sites
greenman100
greenman100
Posted
Posted
Have you a x1600pro?

 

If yes, you have to use ATINDRV.kext and IONDRVSupport.kext from version 10.4.5

 

You can download the 10.4.5 update (the one for intelmac) from apple and extract only those 2 files.

 

I do, and I'm pretty sure i grabbed those 2 files, but will try again.

Link to comment
Share on other sites
gu3d3s
gu3d3s
Posted
Posted

hi guys!

 

 

I tried to configure mine x1600pro agp (one VGA. 1 DVI) to work with two displays, but

I did not have success, therefore I only have the display in clone.

in 1024x768 if I only change for 1280x1204. the display that is in

output VGA (a LCD) functions(works), the other that is on the output DVI (with

1 connector DVI2VGA) does not function(work).

 

in the system profile, and only listed a one display. I am

annexing photos of the system profile and mine dmesg and

kextload,

 

please they help me.

 

 

debtor

 

Here is my system reg:

 

 

Welcome to Darwin!

guedes-jrs-computer:~ guedesjr$ kextstat

Index Refs Address Size Wired Name (Version) <Linked Against>

1 1 0x0 0x0 0x0 com.apple.kernel (8.8.1)

2 18 0x0 0x0 0x0 com.apple.kpi.bsd (8.8.1)

3 25 0x0 0x0 0x0 com.apple.kpi.iokit (8.8.1)

4 27 0x0 0x0 0x0 com.apple.kpi.libkern (8.8.1)

5 24 0x0 0x0 0x0 com.apple.kpi.mach (8.8.1)

6 16 0x0 0x0 0x0 com.apple.kpi.unsupported (8.8.1)

7 1 0x0 0x0 0x0 com.apple.iokit.IONVRAMFamily (8.8.1)

8 1 0x0 0x0 0x0 com.apple.driver.AppleNMI (8.8.1)

9 1 0x0 0x0 0x0 com.apple.iokit.IOSystemManagementFamily (8.8.1)

10 1 0x0 0x0 0x0 com.apple.iokit.ApplePlatformFamily (8.8.1)

11 30 0x0 0x0 0x0 com.apple.kernel.6.0 (7.9.9)

12 1 0x0 0x0 0x0 com.apple.kernel.bsd (7.9.9)

13 1 0x0 0x0 0x0 com.apple.kernel.iokit (7.9.9)

14 1 0x0 0x0 0x0 com.apple.kernel.libkern (7.9.9)

15 1 0x0 0x0 0x0 com.apple.kernel.mach (7.9.9)

16 11 0x249b1000 0x10000 0xf000 com.apple.iokit.IOPCIFamily (2.1) <11>

17 6 0x249cd000 0x4000 0x3000 com.apple.iokit.IOACPIFamily (1.2.0) <11>

18 2 0x24a2f000 0x3d000 0x3c000 com.apple.driver.AppleACPIPlatform (1.0.5) <17 16 11 6 3>

19 0 0x24acd000 0x3000 0x2000 com.apple.driver.AppleIntelCPUPowerManagement (1.0.1) <11 6 4 3 2>

20 0 0x24add000 0x5000 0x4000 com.apple.BootCache (27) <6 5 4 3 2>

21 3 0x24b3e000 0x32000 0x31000 com.apple.iokit.IOHIDFamily (1.4.9) <6 5 4 3 2>

22 0 0x24bb7000 0x3000 0x2000 com.apple.driver.AppleAPIC (1.2.0) <11>

23 0 0x24bc0000 0x4000 0x3000 com.apple.driver.AppleSMBIOS (1.0.6) <11>

24 0 0x2a5ed000 0x3000 0x2000 com.apple.driver.AppleACPIPCI (1.0.5) <18 17 16 11>

25 0 0x2a655000 0x5000 0x4000 com.apple.driver.AppleRTC (1.0.3) <17 5 4 3 2>

26 0 0x2a81f000 0x4000 0x3000 com.apple.driver.AppleACPIButtons (1.0.5) <21 18 17 6 5 4 3 2>

28 3 0x2a914000 0xd000 0xc000 com.apple.iokit.IOATAFamily (1.7.1f4) <5 4 3 2>

29 0 0x2a935000 0x8000 0x7000 com.apple.driver.AppleIntelPIIXATA (1.14) <28 16 11>

30 7 0x2a9bb000 0x1a000 0x19000 com.apple.iokit.IOUSBFamily (2.6.1) <6 5 4 3>

31 0 0x2aa12000 0xe000 0xd000 com.apple.driver.AppleUSBUHCI (2.6.0) <30 16 5 4 3>

32 1 0x2aa25000 0x5000 0x4000 com.apple.driver.ApplePS2Controller (1.1.0) <11>

33 5 0x2aaa6000 0x16000 0x15000 com.apple.iokit.IOStorageFamily (1.5.1) <6 5 4 3 2>

35 1 0x2aafc000 0x15000 0x14000 com.apple.iokit.IONetworkingFamily (1.5.0) <6 5 4 3 2>

36 0 0x2abd2000 0x12000 0x11000 com.apple.driver.AppleUSBEHCI (2.6.1) <30 16 5 4 3>

37 0 0x2adc0000 0x3000 0x2000 com.apple.driver.ApplePS2Keyboard (1.1.0) <32 21 11>

39 0 0x2aef5000 0x9000 0x8000 com.apple.driver.AppleUSBHub (2.6.0) <30 11>

40 0 0x2afcf000 0x4000 0x3000 com.apple.driver.AppleRTL8139Ethernet (1.2.0) <35 16 5 4 3 2>

41 3 0x2b05a000 0x15000 0x14000 com.apple.iokit.IOSCSIArchitectureModelFamily (1.5.1) <11>

42 0 0x2b0a3000 0x4000 0x3000 com.apple.iokit.IOATAPIProtocolTransport (1.5.0) <41 28 11>

43 0 0x2b160000 0xa000 0x9000 com.apple.iokit.IOATABlockStorage (1.4.4) <33 28 11>

44 2 0x2b24a000 0x8000 0x7000 com.apple.iokit.IOCDStorageFamily (1.4) <33 5 4 3>

45 1 0x2b281000 0x13000 0x12000 com.apple.iokit.IOSCSIBlockCommandsDevice (1.5.1) <41 33 11>

46 1 0x2b2ac000 0x5000 0x4000 com.apple.iokit.IODVDStorageFamily (1.4) <44 33 5 4 3>

47 0 0x2b2dd000 0x12000 0x11000 com.apple.iokit.IOSCSIMultimediaCommandsDevice (1.5.1) <46 45 44 41 33 11>

49 0 0x2b440000 0x3000 0x2000 com.apple.driver.AppleUSBComposite (2.6.1) <30 11>

50 0 0x307f2000 0x9000 0x8000 com.apple.iokit.IOUSBUserClient (2.6.0) <30 11>

51 1 0x307f0000 0x2000 0x1000 com.apple.kext.OSvKernDSPLib (1.0) <5 4>

52 2 0x30803000 0x17000 0x16000 com.apple.iokit.IOAudioFamily (1.6.0b3) <51 30 11>

53 2 0x3081a000 0xd000 0xc000 com.apple.driver.AppleAC97Audio (1.0.0) <52 11>

54 0 0x30827000 0x4000 0x3000 com.apple.driver.AppleAC97AudioIntelICH (1.0.0) <53 16 11>

55 3 0x3084e000 0x1b000 0x1a000 com.apple.iokit.IOGraphicsFamily (1.4.4) <16 6 5 4 3>

56 2 0x30869000 0xf000 0xe000 com.apple.iokit.IONDRVSupport (1.4.2) <55 16 6 5 4 3>

58 2 0x30883000 0x5000 0x4000 com.apple.iokit.CHUDKernLib (5) <11 6 2>

59 0 0x30888000 0x7000 0x6000 com.apple.iokit.CHUDUtils (5) <58 11>

60 1 0x3088f000 0xe000 0xd000 com.apple.driver.IOPlatformPluginFamily (2.6.0d1) <11>

61 0 0x3089d000 0x8000 0x7000 com.apple.driver.ACPI_SMC_PlatformPlugin (2.6.0d1) <60 17 16 11 5 4 3>

62 0 0x308a5000 0x5000 0x4000 com.apple.iokit.IOUSBHIDDriver (2.6.0) <30 21 11>

63 0 0x308ac000 0x4b000 0x4a000 com.apple.ATIRadeonX1000 (4.4.0) <56 55 16 11 5 4 3 2>

65 0 0x308fa000 0x14000 0x13000 at.obdev.KUC (1.2.61) <6 5 4 3 2>

66 0 0x3090e000 0x2000 0x1000 com.apple.driver.AppleAC97CodecAD198x (1.0.0) <53 11>

68 0 0x409d6000 0xb000 0xa000 com.apple.iokit.CHUDProf (5) <58 11>

69 0 0x409f1000 0x38000 0x37000 com.apple.kext.ATY_Wormy (4.4.0) <56 55 5 4 3 2>

70 0 0x40a2b000 0x4000 0x3000 com.apple.driver.AudioIPCDriver (1.0.2) <52 5 4 3 2>

71 1 0x40a2f000 0xa000 0x9000 com.apple.driver.AppleSMC (1.0.2d3) <17 6 5 4 3>

72 0 0x40a39000 0x3000 0x2000 com.apple.Dont_Steal_Mac_OS_X (6.0.1) <71 6 4 3 2>

73 0 0x40b56000 0x8000 0x7000 com.apple.filesystems.ntfs (1.2) <4 2>

74 0 0x40c10000 0xb000 0xa000 com.apple.filesystems.msdosfs (1.4.8) <6 5 4 2>

 

guedes-jrs-computer:~ guedesjr$ sudo dmesg

 

hi mem tramps at 0xffe00000

PAE enabled

enabling INTEL features

standard timeslicing quantum is 10000 us

vm_page_bootstrap: 251864 free pages

mig_table_max_displ = 71

Enabling XMM register save/restore and SSE/SSE2 opcodes

Skipping duplicate extension "com.apple.driver.AppleRTL8139Ethernet" with older/same version (1.2.0 -> 1.2.0).

ACPI CA 20060421

AppleIntelCPUPowerManagement: ready

AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled

AppleACPICPU: ProcessorApicId=2 LocalApicId=1 Enabled

Copyright © 1982, 1986, 1989, 1991, 1993

The Regents of the University of California. All rights reserved.

 

using 5242 buffer headers and 4096 cluster IO buffer headers

Enabling XMM register save/restore and SSE/SSE2 opcodes

Started CPU 01

IOAPIC: Version 0x20 Vectors 64:87

ACPI: System State [s0 S4 S5] (S0)

Security auditing service present

BSM auditing present

disabled

From path: "uuid",

Waiting for boot volume with UUID 29CE1284-7609-3397-9459-DD30923B9CED

Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

ACPI: Button driver prevents system sleep

USB caused wake event (EHCI)

Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE1@1F,2/AppleIntelPIIXATARoot/CHN0@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/ST3120827AS Media/IOFDiskPartitionScheme/Untitled 1@1

BSD root: disk2s1, major 14, minor 5

Jettisoning kernel linker.

Resetting IOCatalogue.

display: family specific matching fails

display: family specific matching fails

Matching service count = 0

Matching service count = 2

Matching service count = 2

Matching service count = 2

Matching service count = 2

Matching service count = 4

display: family specific matching fails

display: family specific matching fails

display: family specific matching failsdisplay: family specific matching fails

 

display: family specific matching fails

display: family specific matching failsdisplay: family specific matching fails

 

AppleAC97CodecAD198x: 2-to-4 channel spreading enabled

display: family specific matching failsdisplay: family specific matching fails

Natit: Starting.

device-id: 0x71C2

Natit: Found device

Natit: Found device name

Natit: Setting ATY,VRAM,MemSize=0x00000200

Natit: Setting device_type=ATY,WormyParent

Natit: Setting @1,device_type=display

Natit: Setting @0,compatible=ATY,Wormy

Natit: Setting @1,compatible=ATY,Wormy

Natit: Setting LVDS,EDID=<data not shown>

Natit: Setting @1,name=ATY,Wormy

Natit: Setting DFP1,EDID=<data not shown>

Natit: Setting @0,name=ATY,Wormy

Natit: Setting @0,display-link-component-bits=0x00000006

Natit: Setting @1,display-link-component-bits=0x00000006

Natit: Setting @0,device_type=display

Natit: Setting ATY,FrameBufferOffset=0x00000200

Natit: Setting model=ATI Radeon X1600 Series

 

Natit: Starting.

device-id: 0x71E2

Natit: Found device

Natit: Found device name

Natit: Setting ATY,VRAM,MemSize=0x00000200

Natit: Setting device_type=ATY,WormyParent

Natit: Setting @1,device_type=display

Natit: Setting @0,compatible=ATY,Wormy

Natit: Setting @1,compatible=ATY,Wormy

Natit: Setting LVDS,EDID=<data not shown>

Natit: Setting @1,name=ATY,Wormy

Natit: Setting DFP1,EDID=<data not shown>

Natit: Setting @0,name=ATY,Wormy

Natit: Setting @0,display-link-component-bits=0x00000006

Natit: Setting @1,display-link-component-bits=0x00000006

Natit: Setting @0,device_type=display

Natit: Setting ATY,FrameBufferOffset=0x00000200

Natit: Setting model=ATI Radeon X1600 Series Secondary

IPv6 packet filtering initialized, default to accept, logging disabled

com_apple_driver_RTL8139: Ethernet address 00:83:08:00:31:f8

ATY,Wormy: Not usable

ATY,Wormy: Not usable

ATY,Wormy: vram [d0000000:10000000]

ATY,Wormy: vram [d0000000:10000000]

(104: coreservicesd)tfp: failed on 0:

(104: coreservicesd)tfp: failed on 0:

 

guedes-jrs-computer:~ guedesjr$ ioreg -l -w0 | grep "EDID"

| | | | | "LVDS,EDID" = <00ffffffffffff005a63119001010101280d010380261e782a2c95a6584a9a26215054bfef008

80310a010101010101010101010101302a009851002a4030701300782d1100001e000000ff004132

43033343030303339310a000000fd00324b1e530e000a202020202020000000fc0056583930302d3

0a202020202000ca>

| | | | | "DFP1,EDID" = <00ffffffffffff005a63119001010101280d010380261e782a2c95a6584a9a26215054bfef008

80310a010101010101010101010101302a009851002a4030701300782d1100001e000000ff004132

43033343030303339310a000000fd00324b1e530e000a202020202020000000fc0056583930302d3

0a202020202000ca>

| | | | "CRT2,EDID" = <00ffffffffffff001e6d724301010101010f01036e221b78ea2ee5a4574a9c25115054a56b803

4f454f614f81800101010101010101302a009851002a4030701300520e1100001e000000fd00384b

e530e000a202020202020000000fc004c31373230420a202020202020000000fc00200a202020202

202020202020001a>

| | | | | "IODisplayEDID" = <00ffffffffffff001e6d724301010101010f01036e221b78ea2ee5a4574a9c25115054a56b803

4f454f614f81800101010101010101302a009851002a4030701300520e1100001e000000fd00384b

e530e000a202020202020000000fc004c31373230420a202020202020000000fc00200a202020202

202020202020001a>

 

 

 

post-43278-1163829153_thumb.png post-43278-1163829401_thumb.png

post-43278-1163829421_thumb.png post-43278-1163829436_thumb.png

 

My Reg is:

x1600_regs.rtf

Link to comment
Share on other sites
greenman100
greenman100
Posted
Posted
Have you a x1600pro?

 

If yes, you have to use ATINDRV.kext and IONDRVSupport.kext from version 10.4.5

 

You can download the 10.4.5 update (the one for intelmac) from apple and extract only those 2 files.

 

 

did this too, and it hangs on loading the LoginWindow screen.

 

do I need to change anyting in the kexts? or just copy, and repair permissions?

Link to comment
Share on other sites
Yossarian
Yossarian
Posted
Posted

I recently installed 10.4.8 on my system and intended to try getting titan working. Since then I decided to try using Natit instead. After placing Natit or Natit-edited into my Extensions folder, removing the System/Library/Extension.* and rebooting, I get an immediate kext loading error that recommends reinstalling the kext or contanct the system admin.

 

I own an nVidia graphics card, specifically eVGA e-GeForce 6200 LE.

 

Looking at the info.plist I found the following code...

 

<key>0x0221</key>

<dict>

<key>name</key>

<string>GeForce 6200</string>

</dict>

 

Which I tried changing the Natit-edited to...

 

<key>0x0222</key>

<dict>

<key>name</key>

<string>GeForce 6200 LE</string>

</dict>

 

When I corrected the permissions and rebooted I got the spinning Grey Apple screen, then the monitor went black.

 

Is are a different kext that I should be trying? Is there another step in the install process that I'm skipping?

 

Any help is appreciated. Thanks.

Link to comment
Share on other sites
Atmosfear
Atmosfear
Posted
Posted

@dm_webd: Please fix X1900 in Natit_auto to Alopias.

 

I can successfully report full Dual-Screen support on Sapphire Radeon X1900 XT 256MB using either DVI-I or DVI2VGA on both DVI-Ports (all possible combinations, DVI autodetected, DVI2VGA after "Force Detection" or at bootup).

 

Used JaS 10.4.8 reseed WITHOUT 10.4.4 loginwindow or borisbadenov X1000 packages and Natit_auto kext modified to use Alopias for X1900.

 

Thank you so much, 1920x1200 on my Eizo 24" WS LCD looks so much crisper now, than via DVI2VGA needed with boribadenov!

Link to comment
Share on other sites
etc
etc
Posted
Posted

I've plugged external CRT monitor - nothing result (black screen) - system hangs up or simply ignoring my commands when loginwindow (possibly in that moment) show. :hysterical:

Maybe i should remove card id from ATIRadeonX1000.kext?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...