georges valch Posted May 31, 2020 Share Posted May 31, 2020 10 hours ago, Slice said: It will be more informative if you provide Clover preboot.log in the situation. Thank you for reply. Sorry, is not available anymore cause in the meantime I re-installed from scratch. The problem was that I have activated filevault. Now it's working fine without filevault, just wondering what extra drivers should I add to UEFI folder to be able to boot with filevault on. Link to comment Share on other sites More sharing options...
Slice Posted May 31, 2020 Share Posted May 31, 2020 There will be not a big mistake if you install all drivers that you don't know for a what. There is full information FileVault 2 1 Link to comment Share on other sites More sharing options...
Biglibigli Posted June 9, 2020 Share Posted June 9, 2020 Hi,I stuck on loading Clover r5118 logo in Scan entries, system info : ASUS VivoBook K571GT Laptop Intel® Core™ i7 9750H Intel UHD 630, NVIDIA GeForce GTX 1650 what I did :1. set BIOS Setting : first Set to Default setting. Network Stack = Disabled. Secure Boot = Disabled. SATA Mode = AHCI. VT-d Option = Disabled Intel Virtualization Technology = Enabled Fast Boot = Disabled 2. copy install Catalina in USB flash 3. Installed Clover_r5118.pkg UEFI mode on USB flash4. Placing required kexts in the EFI partition5. Use config_UHD630 from RehabMan OS-X-Clover-Laptop-Config6. Then I edit config.plist as said in for coffee lake CPU config.plistTest the USB but it stuck on loading Clover logo in Scan entries AGAINI installed mac OS Catalina on another ASUS Laptop (K556UQ model) Before so I know what o do, but Never stuck in this state and I don't know where this error come from, search in google but can't find a way to pass it. I Upload EFI Folder here : google drive EFI.zip and attach Debug.log file debug.log.zip Link to comment Share on other sites More sharing options...
Slice Posted June 9, 2020 Share Posted June 9, 2020 Add EmuVariableUefi.efi to drivers. Link to comment Share on other sites More sharing options...
Biglibigli Posted June 11, 2020 Share Posted June 11, 2020 (edited) On 6/9/2020 at 6:59 PM, Slice said: Add EmuVariableUefi.efi to drivers. I add it and worked. then I choose "Boot macOS Install", after a while screen glitched with a white 'no entry icon' on it Last Lines of debug is : 223:530 0:093 ->Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.3.9) 223:612 0:081 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10 224:775 1:163 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10_install 225:241 0:465 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15 225:342 0:100 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15_install 225:410 0:067 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15.1 226:915 1:505 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15.1_install 227:031 0:116 Custom boot screen not used because entry has unset use graphics 227:097 0:065 Closing log 227:164 0:066 start image 'boot.efi' 227:231 0:067 Using load options 'boot.efi dart=0 nv_disable=1 -disablegfxfirmware -cdfon -igfxnohdmi -v debug=0x100 keepsyms=1 ' I thought it might be USB related so I add these patches in kernel and kext patching tab : Name*: com.apple.iokit.IOUSBHostFamilyFind*: 83FB0F0FReplace*: 83FB3F0FName* com.apple.driver.usb.AppleUSBXHCIFind*: 83F90F0FReplace*: 83F93F0F BUT same problem still exist .... config.plist debug.log.zip Edited June 11, 2020 by Biglibigli Link to comment Share on other sites More sharing options...
Biglibigli Posted June 11, 2020 Share Posted June 11, 2020 (edited) 3 hours ago, Biglibigli said: I add it and worked. then I choose "Boot macOS Install", after a while screen glitched with a white 'no entry icon' on it Last Lines of debug is : 223:530 0:093 ->Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.3.9) 223:612 0:081 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10 224:775 1:163 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10_install 225:241 0:465 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15 225:342 0:100 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15_install 225:410 0:067 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15.1 226:915 1:505 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15.1_install 227:031 0:116 Custom boot screen not used because entry has unset use graphics 227:097 0:065 Closing log 227:164 0:066 start image 'boot.efi' 227:231 0:067 Using load options 'boot.efi dart=0 nv_disable=1 -disablegfxfirmware -cdfon -igfxnohdmi -v debug=0x100 keepsyms=1 ' I thought it might be USB related so I add these patches in kernel and kext patching tab : Name*: com.apple.iokit.IOUSBHostFamilyFind*: 83FB0F0FReplace*: 83FB3F0FName* com.apple.driver.usb.AppleUSBXHCIFind*: 83F90F0FReplace*: 83F93F0F BUT same problem still exist .... config.plist debug.log.zip find the problem : No EC0 rename is added. Add EC0 rename. and now I'm in installer, more info will be added soon as I go forward ... Edited June 11, 2020 by Slice Don't cry Link to comment Share on other sites More sharing options...
Dajjal Posted July 12, 2020 Share Posted July 12, 2020 @Slice I know I said I won't bother since my hardware is quite old (X58A-UD5) but can't help but wonder why in hangs on boot now.This is the error that I get with anything past 5116. Plz tell me what is obvious that I'm missing Spoiler Link to comment Share on other sites More sharing options...
Slice Posted July 13, 2020 Share Posted July 13, 2020 @Dajjal I don't see from your picture what is the problem. Try different methods and workarounds until you get new result. Link to comment Share on other sites More sharing options...
crazybirdy Posted July 13, 2020 Share Posted July 13, 2020 12 hours ago, Dajjal said: @Slice I know I said I won't bother since my hardware is quite old (X58A-UD5) but can't help but wonder why in hangs on boot now.This is the error that I get with anything past 5116. Plz tell me what is obvious that I'm missing Spoiler I have this ACPI issue before. After I cancel all ACPI, it works fine for me. Spoiler 1 Link to comment Share on other sites More sharing options...
Slice Posted July 13, 2020 Share Posted July 13, 2020 Clover's DSDT Fixes are based on artificial intelligence so they may be wrong. If you encounter an error then you have two ways: 1. Found an exact reason and improve clover's sources. 2. Switch off DSDT fixes. 2 Link to comment Share on other sites More sharing options...
fusion71au Posted July 14, 2020 Share Posted July 14, 2020 On 7/13/2020 at 3:08 AM, Dajjal said: @Slice I know I said I won't bother since my hardware is quite old (X58A-UD5) but can't help but wonder why in hangs on boot now.This is the error that I get with anything past 5116. Plz tell me what is obvious that I'm missing In the Clover changes thread, DropOEM_DSM methods were excluded after commit Rev 5116 0b7eed38f14400c8501228a30dcc023e1132cec3 by @Slice. For my legacy BIOS desktop (GA-P55aUD3, No 2 in my signature), I had to add Clover DSDT patch "Rename oem_DSM to ZDSM" to avoid ACPI errors with newer Clover r5116+... Spoiler Good Luck! 2 Link to comment Share on other sites More sharing options...
hackintosh1984 Posted August 23, 2020 Share Posted August 23, 2020 I have problem if boot in clover 5120, 5121" error not found while loading boot.efi press any key continue"And boots clover from fat32 msdos usb stick and also hard disk. I have legacy setup pc no uefi Link to comment Share on other sites More sharing options...
Jief_Machak Posted August 23, 2020 Share Posted August 23, 2020 @hackintosh1984 What is the OSX version you are trying to boot ? HFS+ or APFS ? Link to comment Share on other sites More sharing options...
D-an-W Posted August 30, 2020 Share Posted August 30, 2020 I think the latest commit of Clover is broken, when I try and build the .app.pkg is corrupt and if I try and boot with it I get a CPU Halted error. Link to comment Share on other sites More sharing options...
Slice Posted August 31, 2020 Share Posted August 31, 2020 13 hours ago, D-an-W said: I think the latest commit of Clover is broken, when I try and build the .app.pkg is corrupt and if I try and boot with it I get a CPU Halted error. Some more information? I have booted with latest commit. Link to comment Share on other sites More sharing options...
D-an-W Posted August 31, 2020 Share Posted August 31, 2020 2 hours ago, Slice said: Some more information? I have booted with latest commit. Morning Slice, I will try again but the first thing I noticed was the installer for the Clover.app seemed way too small and didn't actually work. 1 Link to comment Share on other sites More sharing options...
iCanaro Posted August 31, 2020 Share Posted August 31, 2020 28 minutes ago, D-an-W said: Morning Slice, I will try again but the first thing I noticed was the installer for the Clover.app seemed way too small and didn't actually work. true 1 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted August 31, 2020 Share Posted August 31, 2020 (edited) Hi @Slice I build latest commit 1963d37 (Mojave/ Xcode as usual) with my personal script: the different size seems to be good, if I'm not mistaken. I did not try to install and boot. Clover app standalone + Clover app.pkg Clover app.pkg content from Pacifist Edited August 31, 2020 by Matgen84 Link to comment Share on other sites More sharing options...
D-an-W Posted August 31, 2020 Share Posted August 31, 2020 (edited) I tried again with 1963d37 but got the same result... Tried again with latest commit, gives the same error with .app going to see if it boots now... - Building Clover.app package installer.. 2020-08-31 17:21:27.566 defaults[44736:1764656] The domain/default pair of (/Users/dan/src/CloverBootloader/CloverApp/build/Clover.app/Contents/Info.plist, CFBundleShortVersionString) does not exist pkgbuild: Reading components from package.plist pkgbuild: Adding component at Applications/Clover.app pkgbuild: error: Path "/Users/dan/src/CloverBootloader/CloverApp/build/package/temp/Applications/Clover.app" is not a valid bundle component (using destination path "/Users/dan/src/CloverBootloader/CloverApp/build/package/temp") productbuild: warning: No package found for distribution URL "file:///Users/dan/src/CloverBootloader/CloverApp/build/package/CloverApp.pkg" productbuild: Wrote product to /Users/dan/src/CloverBootloader/CloverPackage/sym/Clover.app_v.pkg EDIT: 5121 now boots ok, thanks folks. It's just the Clover.app package issue now here. Edited August 31, 2020 by D-an-W Link to comment Share on other sites More sharing options...
Slice Posted August 31, 2020 Share Posted August 31, 2020 @vector sigma I confirm the problem using Xcode 11.2.1 - Building Clover.app... ** BUILD FAILED ** CompileSwiftSources normal x86_64 com.apple.xcode.tools.swift.compiler (53 failures) But I see no reason for this. Link to comment Share on other sites More sharing options...
Slice Posted August 31, 2020 Share Posted August 31, 2020 Looks like headers became inaccessible because they changed. All structures should be redefined for Clover.app . Link to comment Share on other sites More sharing options...
vector sigma Posted August 31, 2020 Share Posted August 31, 2020 1 hour ago, Slice said: Looks like headers became inaccessible because they changed. All structures should be redefined for Clover.app . I guess this commit is the reason, on top of the header some 'imports' are also commented out. Can't work. Maybe Jief has posted something about it but I didn't realize he modified the bridging header, which reproduce some Clover's definitions. Restored. 1 2 Link to comment Share on other sites More sharing options...
D-an-W Posted September 1, 2020 Share Posted September 1, 2020 Tried to check the latest commit but got the errors below... Spoiler [CC] Data Section 1 .text mCoffOffset=576(0x240) mCoffOffsetNew=576(0x240) diff=0(0x0) Section 5 .eh_frame mCoffOffset=25600(0x6400) mCoffOffsetNew=26560(0x67c0) diff=960(0x3c0) Section 3 .data mCoffOffset=26560(0x67c0) mCoffOffsetNew=25600(0x6400) diff=-960(0xfffffc40) [GENFW] CsmVideoDxe [CC] ShellParametersProtocol [CPP] stdio [CC] FileExplorer [CPP] string [CC] ShellProtocol [CPP] strlen [SLINK] Shell [CC] UpdatePage [CPP] wchar [CC] Variable In file included from /Users/dan/src/CloverBootloader/rEFIt_UEFI/Platform/../../CloverApp/Clover/Clover-Bridging-Header.h:22, from /Users/dan/src/CloverBootloader/rEFIt_UEFI/Platform/Settings.cpp:8078: /Users/dan/src/CloverBootloader/rEFIt_UEFI/Platform/../../CloverApp/Clover/NSWindowFix.h:9:9: fatal error: Cocoa/Cocoa.h: No such file or directory 9 | #import <Cocoa/Cocoa.h> | ^~~~~~~~~~~~~~~ compilation terminated. make: *** [/Users/dan/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/rEFIt_UEFI/refit/OUTPUT/Platform/Settings.obj] Error 1 [VFR] BdsDxe build.py... : error 7000: Failed to execute command make tbuild [/Users/dan/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/rEFIt_UEFI/refit] build.py... : error F002: Failed to build module /Users/dan/src/CloverBootloader/rEFIt_UEFI/refit.inf [X64, GCC53, RELEASE] - Failed - Build end time: 06:30:50, Sep.01 2020 Build total time: 00:00:59 dan@Dans-Mac-mini ~ % 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted September 1, 2020 Share Posted September 1, 2020 Hi @Slice@vector sigma I can't build latest commit e4d1a40 (Mojave/ Xcode as usual) Spoiler [CC] uncompr In file included from /Users/mathieu/src/Cloverbootloader/rEFIt_UEFI/Platform/Settings.cpp:8078: In file included from /Users/mathieu/src/Cloverbootloader/rEFIt_UEFI/Platform/../../CloverApp/Clover/Clover-Bridging-Header.h:22: /Users/mathieu/src/Cloverbootloader/rEFIt_UEFI/Platform/../../CloverApp/Clover/NSWindowFix.h:9:9: fatal error: 'Cocoa/Cocoa.h' file not found #import <Cocoa/Cocoa.h> ^~~~~~~~~~~~~~~ [CC] zlib_uefi [SLINK] OcCompressionLib Building ... /Users/mathieu/src/Cloverbootloader/MemoryFix/OcQuirks/OcQuirks.inf [X64] 1 error generated. make: *** [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/rEFIt_UEFI/refit/OUTPUT/Platform/Settings.obj] Error 1 build.py... : error 7000: Failed to execute command make tbuild [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/rEFIt_UEFI/refit] build.py... : error F002: Failed to build module /Users/mathieu/src/Cloverbootloader/rEFIt_UEFI/refit.inf [X64, XCODE8, RELEASE] - Failed - Link to comment Share on other sites More sharing options...
iCanaro Posted September 1, 2020 Share Posted September 1, 2020 ditto as above you can not finish compiling correctly, in no hack and macOS (high sierra, catalina, mojave) where I tried 1 Link to comment Share on other sites More sharing options...
Recommended Posts