thanh hoang Posted October 28, 2017 Share Posted October 28, 2017 1) Hi everyone, I write this guide for Surface pro 2 install Mac OS 10.12.6 but you can use this for 10.13: How work: - Speedtep - Sleep, wake - Optimize battery - Graphic - Brigness Control - Touch Control with Touch-base (not work on 10.13) - Micro SD card - Type Cover with Touchpad - Sound with Dummy HDA and Mic - Battery control fix - USB 3.0 - Imesseger, Facetime, Siri... Not work: - Wifi 2) My surface pro 2: CPU: Core i5 Ram 4Gb Graphics: Intel HD 4400 SSD: 128Gb 3) OK, let go: Download this: https://drive.google.com/file/d/0B_jbpks_HvdTMG9MMlBhODVZQms/view?usp=sharing In my file: you can see: EFI Folder Dummy HDA foe Sound AvastarFwLoader for Bluetooth NullEthernet fix Apple Store, FaceTime... Easykextpro for utility install Created install Mac OS 10.12.6, you can download on Internet, use USB 8GB or 16GB, remember format Guid to have EFI partition. After created Install, use Clover Configater mount EFI of USB and copy folder EFI you download above in it. Remember copy all file above to root USB install Reboot Surface keep volume down and power when Clover screen show, choose Mac OS Sierra to boot. In the Screen install, you open Disk Utility and created 1 or 2 partition if you want install Window. Choose partition to install and wait 20 minutes. After reboot Choose partition you installed it and boot, after setup complete. Open Clover Configator and mount EFI hard drive and copy folder EFI in it. Use Easykextpro install Dummy HDA, AvatarFwloader and Nullethernet. If you have usb wifi, you can install driver. Reboot again whit not USB.... It done. If you have Touch-base software license you can install it. Report me if you have problem. I have you latest Clover Bootloader, you can use this for Mac OS 10.13, if you want in stall and boot APFS, please install APFS.efi latest. But touch-base not support 10.13. Youtube preview: 1 Link to comment https://www.insanelymac.com/forum/topic/329023-guide-mac-os-10126-installation-on-surface-pro-2/ Share on other sites More sharing options...
IAMTHEONLYGOD Posted December 24, 2017 Share Posted December 24, 2017 Hi Thanks for posting the tutorial. The surface pro 2 has had MAJOR bluetooth problems in this os. Any tips to get it functioning better? Has been difficult to get anything major done without the mouse and keyboard. THANKS IN ADVANCE. By the way, visiting vietnam now. Can pm with a zalo number. Link to comment https://www.insanelymac.com/forum/topic/329023-guide-mac-os-10126-installation-on-surface-pro-2/#findComment-2556013 Share on other sites More sharing options...
IAMTHEONLYGOD Posted January 1, 2018 Share Posted January 1, 2018 Messaged op multiple times...waited long for replies...none... I do native ios engineering in objective c and swift and have been hackintoshing for numerous years...so fair warning: Unless as adept at hackintosh as rehabman or similar, don't use the op's guide...dsdt or similar seems to have issues. Installed about 10 times many different ways...then tried earlier version...still problems...usb and bluetooth Link to comment https://www.insanelymac.com/forum/topic/329023-guide-mac-os-10126-installation-on-surface-pro-2/#findComment-2559563 Share on other sites More sharing options...
IAMTHEONLYGOD Posted January 6, 2018 Share Posted January 6, 2018 Op hasn't answered any questions here or by pm. Don't use this guide until it is updated with proper USB solution to make bluetooth work properly...not simply show up. If only need one bluetooth device to work vaguely reliably, maybe this will do...maybe... Actually...any skilled sp2 hackintosh types can reply with some links to fully functioning dsdt and plist. Thanks in advance. Already asked jape about bt and he said it is likely a usb config issue. Link to comment https://www.insanelymac.com/forum/topic/329023-guide-mac-os-10126-installation-on-surface-pro-2/#findComment-2562896 Share on other sites More sharing options...
mattschwantes Posted June 14, 2018 Share Posted June 14, 2018 (edited) Please take note that there are definitely problems with the USB ports and Bluetooth using the above config.plist and DSDT/SSDT, as also mentioned by previous poster. It seems these problems are due to changes introduced in later versions of El Capitan that continue into Sierra/HighSierra. I've spent a long time testing with both a 4200U and 4300U model using a USB WiFi WN725N v2 (containing a RTL8188EU chipset). After a lot of changes to DSDT/SSDT, everything is working OK for me in 10.13.6 with the attached files. I don't personally use bluetooth very much, so don't be upset with me if that is still acting up. I am attaching my modified DSDTs and SSDTs as tested on a SP2 4200U. It should work for you on SP2 4300U but you may need to modify the power management. Sorry I won't be able to work on this any further, but hope this will help you all! CLOVER_10_13_6_matts.zip Edited September 13, 2018 by mattschwantes bug fix Link to comment https://www.insanelymac.com/forum/topic/329023-guide-mac-os-10126-installation-on-surface-pro-2/#findComment-2619352 Share on other sites More sharing options...
IAMTHEONLYGOD Posted December 16, 2018 Share Posted December 16, 2018 Hi! Saw the post now. Thanks so much for posting that! I hadn't been using the mac side as much, partially because of the bluetooth. Likely going to install that later tonight or tomorrow. Link to comment https://www.insanelymac.com/forum/topic/329023-guide-mac-os-10126-installation-on-surface-pro-2/#findComment-2654100 Share on other sites More sharing options...
mattschwantes Posted March 30, 2019 Share Posted March 30, 2019 (edited) On 12/17/2018 at 12:37 AM, IAMTHEONLYGOD said: Hi! Saw the post now. Thanks so much for posting that! I hadn't been using the mac side as much, partially because of the bluetooth. Likely going to install that later tonight or tomorrow. It seems that my DSDT didn't fix the problems for the above user. It helped with my USB WiFi dongle and BT, so I'll leave the file online two posts above: warning - your mileage may vary. Edited July 2, 2019 by mattschwantes Link to comment https://www.insanelymac.com/forum/topic/329023-guide-mac-os-10126-installation-on-surface-pro-2/#findComment-2668612 Share on other sites More sharing options...
Recommended Posts