Jump to content

AppleHDA Solution - Work in progress

Taruga

By Taruga,
in AppleHDA

 Share
4,108 posts in this topic

Recommended Posts

x03n
x03n
Posted
Posted

FU :censored2: KIN' A... This worked with your linux dump of the Sigmatel9250.

 

Used Uphuck 10.4.9 v1.4i rev3 and everything was found except my sound and wifi.

Sound works now. Now I just have to get my wifi to work and this will be set!

 

Gateway Laptop

Model: MX8738

Processor

Intel® Pentium® Dual-Core Mobile Processor T2080

1.73GHz | 1MB L2 Cache | 533MHz FSB

Display

17" Widescreen Ultrabright™ WXGA TFT (1440x900)

Chipset

Intel® 943GML Chipset

Memory

1024MB DDR2 Memory (2 x 512MB), 667MHz

Expandable to 2GB 2 DDR2 Slots (Total) | 0 DDR2 Slots (Available)

Video

Intel® Graphics Media Accelerator 950 with

Up to 224MB of Shared Video Memory

Audio

High-definition 2-channel

Built-in speakers

Hard Drive

160GB 5400 RPM SATA Hard Drive

Optical Drive

8x Multi-Format Dual Layer DVD+/-RW with DVD-RAM

Digital Media Reader

4-in-1 Memory Card Reader

Secure Digital™ (SD), Multi Media Card™

(MMC), Memory Stick™ (MS), Memory Stick™ Pro, XD

Communications/Networking

56k ITU v.92 ready Fax/Modem (RJ-11 port)

10/100 Mbps Ethernet LAN (RJ-45 port)

802.11 g Wireless LAN

Interfaces

4 - USB 2.0 ports

1 - IEEE 1394 port

1 - VGA connector

1 - S-Video connector

1 - RJ-45 Ethernet port

1 - RJ-11 modem port

1 - Headphone/audio out

1 - Microphone

1 - Kensington lock slot

1 - AC adapter connector

Pointing Device

Synaptics Touchpad with Vertical Scroll

Expansion Slot

PCMCIA - Type I or Type II

Battery Type

6-Cell 2400 mAh Lithium Ion

Link to comment
Share on other sites
SaxMachine
SaxMachine
Posted
Posted

Unfortnately don't work Realtek ALC861 on my asus R1F with patch 1.16

Work only out on internal speaker/no mic in/ no out speaker with AzaliaAudio.pkg http://forum.insanelymac.com/index.php?sho...mp;#entry259784

 

Any news?

 

Thanks to all for support!

 

Excuse me for my bed english...

Link to comment
Share on other sites
deathr
deathr
Posted
Posted
Do that. Other tecra users will benefit from your experience
Tried. Nothing works :((((((. Tried All configurations in Alc883.pkg patch, Tried ALL Taruga's Patcher versions. Got my own linux codec dump with ubuntu (attached) Tried on 10.4.7, 10.4.9(8.9.1/8.8.1) but still no results :D((((. Please somebody help me! What is wrong with my audio? Other people says that their ALC883 works fine (the have 2ch output just after installing Azalia kext and a can't get even stereo output, just audio icon appears in menu bar and there is no sound.)

AcerALC883.txt

Link to comment
Share on other sites
Wuffty
Wuffty
Posted
Posted
I've being trying for weeks to install OSX in a system with that type of mobo. How did you do it? Thanks

 

I am sorry, it tooks me longer than I thought it would.

 

I used the Uphuck 1.4i r2 install dvd (thanks to the uphuck-team for this great work !!!) for installing OSX on my Asrock

 

with the following installation options:

 

v1.4i Main-System (of course ;-)

 

Patches

- loginwindow 10.4.4

- Remove CPUPowermanagement kext

- remove Thermal kexts

 

Drivers:

- VGA

- NVidia

- Natit 0.1

- AGPGart

- AGPGart V1.1

 

- System

- ICH8, ICH6

- VIA SATA/ATA

- NTFS-3G

- ext2fs

- Network

- Realtek R1000 (for my Realtek Network IFC)

- VIA Rhine (for onboard network IFC)

 

and all the applications

 

My HD is an PATA HD hanging on the first channel together with an LG cdrom on the second channel.

You must format the HD with a (MBR) master boot record (see partition/options in diskutil)

 

 

That works for me out of the box, even with my AGP Asus NVidia 6200

 

You can mail me, if I can help.

 

Edit: What I've forgotten: I used the AppleHDAPatcher 1.6 not the Azalia Audiodriver, that worked better for me (especially dig out)

 

Cheers,

 

Udo

Link to comment
Share on other sites
AkshayGenius
AkshayGenius
Posted
Posted

Hi guyz,

I am planning to install jas x86 10.4.8 ppf1 + ppf2 on my laptop which has conextent AMC audio. After painfully waiting for a week for the download to get over (don't know why it took so much time), Ive decided Ill download all the drivers before hand. Considering the fact, Im downloading 10.4.8, which version should I download? The jas disc Im downloading also comes with a update to 10.4.9, is it recommended to upgrade to that?

It will be highly appreciated if someone answers my questions as Im fairly very new to this OS.

 

Thanx,

Akshay

Link to comment
Share on other sites
AkshayGenius
AkshayGenius
Posted
Posted
Hi guyz,

I am planning to install jas x86 10.4.8 ppf1 + ppf2 on my laptop which has conextent AMC audio. After painfully waiting for a week for the download to get over (don't know why it took so much time), Ive decided Ill download all the drivers before hand. Considering the fact, Im downloading 10.4.8, which version should I download? The jas disc Im downloading also comes with a update to 10.4.9, is it recommended to upgrade to that?

It will be highly appreciated if someone answers my questions as Im fairly very new to this OS.

 

Thanx,

Akshay

 

I realized that my question is not very clear. What I meant is that, as Im downloading 10.48, so which version of Apple HDA should I download? And is it recommended to update to 10.4.9, i.e will it cause more problems or will it solve some... I have conextent AMC audio, which Im going to run with Azalia or Conextent HD Audio drivers...

 

Thanx,

Akshay

Link to comment
Share on other sites
rytterfalk
rytterfalk
Posted
Posted

I'm using AppleHDAPatcher_v1.16 with the SigmaTel STAC9227

 

according to Intels homepage for D975XBX2

 

Audio

Intel® High Definition Audio subsystem in one of the following configurations:

 

8-channel (7.1) audio subsystem with five analog audio outputs and two S/PDIF digital audio outputs (coaxial and optical) using the Sigmatel* 9274D audio codec

6-channel (5.1) audio subsystem with three analog audio outputs using the Sigmatel 9227 audio codec

 

I tried several ways of getting sound to work without any luck. (I installed some ALC888 / 882 driver, hehe.. but that was before I realized that I could go to intels homepage to see what audiocard I had) I did get sound for some time, but no Mic. And now I get this message when trying to update:

 

 

AppleHDA Patcher - 2006/2007 Taruga v1.16

_______________________________________________________

Codec : \f0\fs24 \cf0 SigmaTel STAC9227\

Vendor Id : 0x83847618\

Subsystem Id : 0x80862113\

_______________________________________________________

 

 

* Detected unsupported \f0\fs24 Codec

 

What to do!! Sounds like everyone else get sound and mic to work so easily. I feel :wacko: you can write me at carl@rytterfalk.com if you know what I should do! :D

Link to comment
Share on other sites
szzs
szzs
Posted
Posted

SIGMATEL Stac 9200 - NO MIC

 

My laptop is a Packard Bell Easy Note (Intel T5200/950/SIGMATEL Stac 9200....)

 

I used AppleHDA patch 1.6 and tried ALL the sigmatel 9200 / Stac txt, but I have only audio out!

 

In the system preferences the Internal Built-in Mic is mentioned as "no input control"... So there is no input in the built in mic nether through jack-input...

 

Also there is no WEBcam... May the two thing connected?

Link to comment
Share on other sites
swindlerborealis
swindlerborealis
Posted
Posted

Akshay, as for upgrading to 10.4.9, this is not the right topic to discuss it in, there are many topics about upgrading and jas installation, search for them. as for conexant, I don't have this particular brand but I'm assuming that there are many varieties of them in which case it would help if you got more detailed information on it and then searched this topic and others as well until you get a fairly good idea on the status of it. Then, if after searching you still do not have a reliable answer post detailed information about your audio and mobo. As for waiting to collect drivers before installing, I wouldn't worry about it, the hda patcher and codec files are very small and shouldn't slow you down much at all and it would help to have everything ready to go so that when someone gives you an answer you can test it out right away and post back here with the results.

Link to comment
Share on other sites
AkshayGenius
AkshayGenius
Posted
Posted

Okay, I was asking abt upgrading to 10.4.9 because the latest version of apple HDA is only compatible with .9, so I though it may have some extra compatibility. Well, I guess the only way I'll get to know is by actually installing it and using it for a some time....

Link to comment
Share on other sites
jjduro
jjduro
Posted
Posted
why do ppl completely ignore my comments, as if they are completely oblivious to them!.... I

 

Maybe your just suffering the same problems as all of us.

 

First of all, what are you system specs?

You can check them out with CPU-Z.

 

Secondly, in most cases, JaS DVD will quitte suffice. And you can upgrade even to 10.4.10.

 

I'm not sure which version of Taruga's patcher you should download, but why not start with the latest? If that doesn't work, try the one before than and so on.

Got it?

Next time, do a forum search before posting yor comments. Ok?

Now go and check yor system specs.

Take care

Link to comment
Share on other sites
Frappe051
Frappe051
Posted
Posted

Attached is my codec#0 file output, which gives me no results with the AppleHDA Patcher..

 

Realtek ALC880 with a different Subsystem ID, which seems to be the only thing different from other ALC880s (to me, at least.)

 

Anybody have any info on getting this to work with AppleHDA? Azalia just sucks, choppy sound and all..

codec.txt

Link to comment
Share on other sites
delish
delish
Posted
Posted

For Intel ICH9 chipsets remember to add DevID to these files

ALCInject.kext/Contents/Info.plist

AppleHDA.kext/Contents/Plugins/AppleHDAController.kext/Contents/Info.plist

 

0x293e8086 is the one to add.

 

got my realtek 883 working on Asus P5K-VM

Link to comment
Share on other sites
wingtech
wingtech
Posted
Posted

I just tried to install drivers for my soundmax AD1986a soundcard. Everything is OK until I restart the computer. Then right befor it would log in the screen goes darker and it says: ˝You need to restart your computer. hold down the power button for several seconds or press the restart button˝; When i restart the computer i have the same problem.

 

I have used 1.14 version of AppleHDA and mac os x 10.4.3.

 

Plz help me, I really want to listen to some good music!

Link to comment
Share on other sites
Allsop
Allsop
Posted
Posted
For Intel ICH9 chipsets remember to add DevID to these files

ALCInject.kext/Contents/Info.plist

AppleHDA.kext/Contents/Plugins/AppleHDAController.kext/Contents/Info.plist

 

0x293e8086 is the one to add.

 

got my realtek 883 working on Asus P5K-VM

 

 

I have the same mainboard.. did you get more than stereo out, like line-in, mic, headphones etc?

I only get stereo out with the azalia kexts... but you did it with AppleHDA?

If so could you please provide your audio extensions?

thanks

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...