Jump to content

AppleHDA Solution - Work in progress

Taruga

By Taruga,
in AppleHDA

 Share
4,108 posts in this topic

Recommended Posts

vinlar
vinlar
Posted
Posted

Another hopeful user groveling for AD1988B support. Existing h/w support with audio out meets most needs, but mic input would be nice for my gaming endeavors. One less reason for me to boot into XP and one more reason to reformat that drive to JHFS+. :D

Link to comment
Share on other sites
devilhood
devilhood
Posted
Posted
Another hopeful user groveling for AD1988B support. Existing h/w support with audio out meets most needs, but mic input would be nice for my gaming endeavors. One less reason for me to boot into XP and one more reason to reformat that drive to JHFS+. :rolleyes:

 

I second that :)

Link to comment
Share on other sites
Robin Masters
Robin Masters
Posted
Posted
Try my guide here> http://forum.insanelymac.com/index.php?sho...c=64754&hl=

 

Full input & output has been achieved on some systems running Intel ICH7 on ADI codec.

 

If you are under Intel chipset, in the AppleAC97AudioIntelICH.kext you need to place two copies of the vendor ID and device ID both under say the ICH7 and Nvidia AC97 sections ie. 0x27d88086 under the IOPCIMatch sections. Read my post for more info.

 

Thank's Middleman, I have tried your guide, but for me don't work in or out audio. I have tried also the Conexant_HD_Audio.pkg.zip but nothing.

My card is AD1981HD and my laptop is HP Compaq nx9420, there is a button with a little led for 'no sound' always on!

Link to comment
Share on other sites
Middleman
Middleman
Posted
Posted
Thank's Middleman, I have tried your guide, but for me don't work in or out audio. I have tried also the Conexant_HD_Audio.pkg.zip but nothing.

My card is AD1981HD and my laptop is HP Compaq nx9420, there is a button with a little led for 'no sound' always on!

 

Robin,

 

I found that my guide works on most AC97 setups - I got 6 channel sound, mic & line-in on one machine! If you are using a Soundmax HD chip (which in your case, you are) you then have to use Taruga's AppleHDA method. Its actually quite easy - I solved another machine with a Realtek ALC883 using Taruga's method.

 

And if you want to know what the binary code for your codec id is for AppleHDA, use the Apple Calculator set to Programming mode. If you use the HEX calc and type in 0x11D41981, and press the DEC button it should give you the number you need.

Link to comment
Share on other sites
gecko
gecko
Posted
Posted

AppleHDAPatcher says mine is an unspooprted Analog Codec. Is there any hope? Its on an IBM Thinkpad Z60M.

 

 

 

Codec: Analog Devices AD1981
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x10140597
Revision Id: 0x100200
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
 PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
 Connection: 2
 0x01* 0x04
Node 0x03 [Audio Output] wcaps 0x441: Stereo
 Power: 0x0
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
 PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
 Power: 0x0
 Connection: 1
 0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x33 0x33]
 Pincap 0x081173f: IN OUT HP EAPD Detect
 Pin Default 0xc3014110: [Both] Line Out at Ext Left
Conn = 1/8, Color = Green
 Pin-ctls: 0x40: OUT
 Connection: 2
 0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x2d 0x2d]
 Pincap 0x081f: OUT HP Detect
 Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
 Pin-ctls: 0xc0: OUT HP
 Connection: 2
 0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80]
 Pincap 0x0810: OUT
 Pin Default 0x591311f0: [N/A] Speaker at Int ATAPI
Conn = ATAPI, Color = Black
 Pin-ctls: 0x40: OUT
 Connection: 1
 0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals: 
 Pincap 0x081727: IN Detect
 Pin Default 0xc2a1502e: [Both] Mic at Ext Front
Conn = 1/8, Color = Red
 Pin-ctls: 0x24: IN
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0xbf 0xbf]
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
 Pin-ctls: 0x20: IN
 Connection: 2
 0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x014411f0: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
 Pin-ctls: 0x40: OUT
 Connection: 1
 0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
 Connection: 6
 0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 2
 0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
 Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
 Amp-Out vals:  [0x80]
 Connection: 2
 0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 8
 0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
 Connection: 1
 0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x19 0x19]
 Connection: 1
 0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
 Power: 0x0
 Connection: 13
 0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 8
 0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
 Pincap 0x0820: IN
 Pin Default 0x59f311f0: [N/A] Other at Int ATAPI
Conn = ATAPI, Color = Black
 Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
 Pincap 0x0827: IN Detect
 Pin Default 0x599311f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = Black
 Pin-ctls: 0x20: IN
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x41a190f0: [N/A] Mic at Ext Rear
Conn = 1/8, Color = Pink
 Pin-ctls: 0x24: IN
 Connection: 2
 0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x9933e120: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = White
 Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x19 0x19]
 Connection: 1
 0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Connection: 1
 0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x18

Link to comment
Share on other sites
amir1
amir1
Posted
Posted

I have the alc262, when i configure everything, I see the option for output, and i can play with adjusting the volume up and down, but i can not get any sound out of any speakers, on board laptop speakers, headphones etc. please guys help me out, is there something else i have to adjust???

Link to comment
Share on other sites
macgirl
macgirl
Posted
Posted

Today I got the Ubuntu and Kubuntu Install Disks, with these I got sound on speakers (of course they are usign the ALSA driver that patches or bridge the headphones jack to the speakers and detects when a plug is inserted so silence the speakers and pass the shout to that jack)

 

I fetch the codec#0 and now it has another sound option I think is the Digital (SPDIF) output through the HDMI connector, I have not an HDMI cable, decoder, Display so I can't confirm this now.

 

Anyway if anyone want the dump here it is:

 

in Mac OS I still getting sound only from headphones Jack 1 only

codec0.txt

Link to comment
Share on other sites
amir1
amir1
Posted
Posted

I really do not know what to do now, i can't hear any sound. However I can play with the volume adjustment and i see the output in the settings, but no sound from laptop speakers or external speackers or headphones.... grrr.... im going crazyyyyyyy

Link to comment
Share on other sites
BuXb
BuXb
Posted
Posted
I've been searching the forums for an hour and can't seem to find a fix for my conexant hd audio. My HP dv6000 laptops internal speakers work, but that's it. I really need my headphones.
anybody who has something to contribute to get our Conexant HDA working, please do so here.

 

Thanks,

Bugs

Link to comment
Share on other sites
sensimeon
sensimeon
Posted
Posted

Using 10.4.10 xXx installer disc I was able to get the audio to work out of the box the first time around,

now the second time around it's not working of course.

 

 

dell e510, which is the same as e310 and e5105

with sigmatel audio

i just cant find the driver

 

which i take the codec dump from here :http://wiki.osx86project.org/wiki/index.php/HCL_10.4.8/Desktops

and drop it into the patcher, it says * Detected unsupported SigmaTel Codec

 

not sure how to find my device id, because it's not showing up anywhere.

 

ideas?

Link to comment
Share on other sites
Mohammad Porooshani
Mohammad Porooshani
Posted
Posted

Hi,

I wanted to thank everybody here for their effortss to make these Sounds working.

I think finding a good match for any listed soundcard here is even harder than writing a new one! in this mess I see here (126 page!) no one can find the answer.

For example me, I can't find a way to enable my Volume bar for my CMI9880 on ICH6 of my Asus p5AD2-e mobo, and of course I have only 2-ch audio (anyhow I'm using analog speakers and I have 4-ch artificialy!).

HDAPatcher won't work for my CMI9880 dump file I found in the link provided in the download instruction (on first page), it says Unsupported C-Media Codec detected!.

Any guide? Am I missing a point (maybe I need to create my own Linux dump on my PC - which for sure I don't know how! :angel: ).

Big man taruga is missing and nobody knows how to go on this project (specially when I think no one intrested in cmi9880!-poor Sound card!).

I have an Creative audigy, but as everybody (for sure) knows, there would be no compatibility for it, so I have to use my onboard Sound card, I have sounds (thanks God!) but,only 2-ch,no input(nothing important here), no volume control, lots of jitters on some bitrates and much more frustration here...

I love this Mac, But I love music more, what a hard life to live! :wacko:

Link to comment
Share on other sites
Middleman
Middleman
Posted
Posted
AppleHDAPatcher says mine is an unspooprted Analog Codec. Is there any hope? Its on an IBM Thinkpad Z60M.

Codec: Analog Devices AD1981
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x10140597
Revision Id: 0x100200
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
 PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
 Connection: 2
 0x01* 0x04
Node 0x03 [Audio Output] wcaps 0x441: Stereo
 Power: 0x0
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
 PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
 Power: 0x0
 Connection: 1
 0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x33 0x33]
 Pincap 0x081173f: IN OUT HP EAPD Detect
 Pin Default 0xc3014110: [Both] Line Out at Ext Left
Conn = 1/8, Color = Green
 Pin-ctls: 0x40: OUT
 Connection: 2
 0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x2d 0x2d]
 Pincap 0x081f: OUT HP Detect
 Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
 Pin-ctls: 0xc0: OUT HP
 Connection: 2
 0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80]
 Pincap 0x0810: OUT
 Pin Default 0x591311f0: [N/A] Speaker at Int ATAPI
Conn = ATAPI, Color = Black
 Pin-ctls: 0x40: OUT
 Connection: 1
 0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals: 
 Pincap 0x081727: IN Detect
 Pin Default 0xc2a1502e: [Both] Mic at Ext Front
Conn = 1/8, Color = Red
 Pin-ctls: 0x24: IN
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0xbf 0xbf]
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
 Pin-ctls: 0x20: IN
 Connection: 2
 0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x014411f0: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
 Pin-ctls: 0x40: OUT
 Connection: 1
 0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
 Connection: 6
 0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 2
 0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
 Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
 Amp-Out vals:  [0x80]
 Connection: 2
 0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 8
 0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
 Connection: 1
 0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x19 0x19]
 Connection: 1
 0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
 Power: 0x0
 Connection: 13
 0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 8
 0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
 Pincap 0x0820: IN
 Pin Default 0x59f311f0: [N/A] Other at Int ATAPI
Conn = ATAPI, Color = Black
 Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
 Pincap 0x0827: IN Detect
 Pin Default 0x599311f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = Black
 Pin-ctls: 0x20: IN
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x41a190f0: [N/A] Mic at Ext Rear
Conn = 1/8, Color = Pink
 Pin-ctls: 0x24: IN
 Connection: 2
 0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x9933e120: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = White
 Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x19 0x19]
 Connection: 1
 0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Connection: 1
 0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
 0x18

 

Gecko,

 

Follow my guide here > http://forum.insanelymac.com/index.php?sho...mp;#entry476428

Link to comment
Share on other sites
BOL_fan
BOL_fan
Posted
Posted

I know the Sigmatel 9200 has been discussed many times over these 127 pages, but my output is a bit different.

 

 * Patching AppleHDA.kext to 0x83847690				Done
* Checking AppleHDA for patch						Done
0001f4a7	cmpl	$0x83847690,%eax
0002058b	cmpl	$0x83847690,%eax
* Checking for SPDIF Out						   		Detected
* Checking for SPDIF In									Detected
* Creating AppleHDA configs
* Using the following nodes in pathmap

 Back Mic: 3 10 12 15
Speaker  : 14 11 7 2
Spdif In : 4 8
Spdif Out: 9 5

* Copying new config to destination					Done
* Repairing Permissions
Started verify/repair permissions on disk disk0s1 Hackintosh HD
Determining correct file permissions.
The privileges have been verified or repaired on the selected volume
Verify/repair finished permissions on disk disk0s1 Hackintosh HD
* Deleting Extensions Cache							Done

** Done patching - You can reboot now **

 

Everything with the sound works great in Ubuntu 7.10, so I got my own code dump from that and used it with the 1.6 patcher (I'm running uphuck 10.4.9 v1.4i).

 

Basically after I reboot, I get no sound in/out and nothing is listed in the Audio section of System Preferences. Also, the audio part of System Profiler shows nada.

 

If anyone has any ideas, I'd be eternally grateful. :lol:

 

I'll attach my linux dump in case anyone wants to take a peek.

sig9200.txt

Link to comment
Share on other sites
discin420style
discin420style
Posted
Posted

It seem's that there are some outstanding cards that do not work in the sigmatel 9200 line. I have a Dell D420 that I have spent the good part of 2 weeks trying to patch, reinstall, repair...etc ...etc.

 

I have tried tarugas patcher (all version) and it seems to detect everything correctly and attempt to patch the kexts but....no luck after reboot. I have tried my own codec dump from this machine as well as many of the others posted on various threads.

 

Here is the top info of of the dump

 

Codec: SigmaTel STAC9200

Address: 0

Vendor Id: 0x83847690

Subsystem Id: 0x102801d6

Revision Id: 0x102201

 

I am usually really good about searching the forums and finding the solutions but alas I need to ask for help. I have attached the full Codec dump from Linux for this machine. Any help would be appreciated. I would be willing to test anything anyone can offer.

 

Peace,

 

discin420style

dell_d420_codec.txt

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...