Jump to content

AppleHDA Solution - Work in progress

Taruga

By Taruga,
in AppleHDA

 Share
4,108 posts in this topic

Recommended Posts

f.carbo
f.carbo
Posted
Posted

hello!

my vendor ID: 10EC

my device ID: 0861

 

i think that i've to use ALC861 no?

But when i move the .txt file on the ICON of AppleHDApatcher the program start but no device was found on my laptop :D

Some of u can help me?

How can i use the file for the "extension"?

thanks

Link to comment
Share on other sites
6apxat
6apxat
Posted
Posted
ok, did you installed any kext for your sound card? if so you need to download AppleHDAPatch 1.20 and extract the folder but don't open it just drag and drop your code to the patch and wait until you see the message it till you to reboot your mac. reboot your mac and see if you have and sound...

 

Of course I did so :)

I mean there was no result.

Link to comment
Share on other sites
weaksauce12
weaksauce12
Posted
Posted

I gave STAC9271D_0x83847627_testing a try on my Intel Bad Axe 2 (D975XBX2KR). It has no Sound Output, but it does let me adjust volume and use the mute function. I tried all of the ports and none had sound output. Using the Linux codec dump, I get stereo output but no Mute or Mic Input.

Link to comment
Share on other sites
6apxat
6apxat
Posted
Posted
what do you see when you drag and drop you code to AppleHDA patcher?

 

AppleHDA Patcher - 2006/2007 by Taruga v1.20			


* Patching AppleHDA.kext to 0x10ec0260				Done
* Checking AppleHDA for patch						Done
0001f4a0	cmpl	$0x10ec0885,%eax
0001f4a7	cmpl	$0x10ec0260,%eax
00020584	cmpl	$0x10ec0885,%eax
0002058b	cmpl	$0x10ec0260,%eax
* Checking for SPDIF Out 							Not Detected
* Checking for SPDIF In							  Not Detected
* Using the following nodes in pathmap

Speaker  : 15 8 2

* Copying new config to destination					Done
* AppleAzalliaAudio detected
* Removed								Done
* Repairing Permissions								Done
* Deleting Extensions Cache								Done

** Done patching - You can reboot now **

Link to comment
Share on other sites
ka911
ka911
Posted
Posted 
AppleHDA Patcher - 2006/2007 by Taruga v1.20			


* Patching AppleHDA.kext to 0x10ec0260				Done
* Checking AppleHDA for patch						Done
0001f4a0	cmpl	$0x10ec0885,%eax
0001f4a7	cmpl	$0x10ec0260,%eax
00020584	cmpl	$0x10ec0885,%eax
0002058b	cmpl	$0x10ec0260,%eax
* Checking for SPDIF Out							 Not Detected
* Checking for SPDIF In							  Not Detected
* Using the following nodes in pathmap

Speaker  : 15 8 2

* Copying new config to destination					Done
* AppleAzalliaAudio detected
* Removed								Done
* Repairing Permissions								Done
* Deleting Extensions Cache								Done

** Done patching - You can reboot now **

 

you have the in/out not Detected! I hope you do have the right code dump for your sound card.

Link to comment
Share on other sites
6apxat
6apxat
Posted
Posted
you have the in/out not Detected! I hope you do have the right code dump for your sound card.

 

That's probably because I don't have SPDIF :(

I did the dump myself from Ubuntu linux.

Link to comment
Share on other sites
eMxyzptlk
eMxyzptlk
Posted
Posted

Hello,

 

First of all please excuse me for being so noob in Mac, It's my first time on an OS X, I'm using Linux/Unix since 5 years but I just don't know Mac enough yet.

 

Anyway I have a Toshiba Satellite A135-S4427 It has an Intel 82801G (ICH7) Sound card, But I am unable to get the model number in the format ALC or AD... As I said I'm new to Mac I couldn't find the command to dump hardware info, but on the GUI I only found this:

Device ID:	0x1179FF01
Audio ID:	12
Available Devices:

 

Here's some more information but taken from Linux

lspci -vvv

udevinfo -a -p /sys/class/sound/audio

 

I'm currently using the driver AzaliaAudio.pkg.zip The audio output works nicely I can Increase/Decrease the volume the sound is recognized well but I have 2 problems, The headphones jack is not working, the sound just keep coming from the speakers, and the audio input is not working, there's no input device.

 

Thanks guys and keep up the good work.

Link to comment
Share on other sites
Vampirexx
Vampirexx
Posted
Posted

Hi to all!

I got an Asus F7L notebook, I have audio with Azalia Kext but only exit channel, not mic nor headphones.

I dumped my Realtek 660 and patched with taruga AppleHDA 1.20...

but no results, no audio at all.

 

I enclose my dump, hope someone can help me!

 

http://rapidshare.com/files/97932039/codec_dump.txt.html

 

thanx a lot

Link to comment
Share on other sites
neil43
neil43
Posted
Posted

Need your help.

ECS 945GCT-M/1333 V3.0 mother board, E6750 cpu, 1GB memory, running on board G950 video with Kalyway 10.5.1. The docs say it has IDT 92hd202 6-channel Hi Def Audio Codec (good sound in XP and Linux), the attached Linux dump indicates SigmaTel STAC9221 A2. I have tried your patchers from 1.15 to 1.20. I see internal speakers and digital out in the setup screens but no audio output. Here is the last patcher run:

 AppleHDA Patcher - 2006/2007 by Taruga v1.20 





* Patching AppleHDA.kext to 0x83847682 Done

* Checking AppleHDA for patch Done

0001f4a7 cmpl $0x83847682,%eax

0002058b cmpl $0x83847682,%eax

* Checking for SPDIF Out Detected

* Checking for SPDIF In Not Detected

* Using the following nodes in pathmap



Back Mic: 6 23 18 11

Speaker : 13 2

Spdif Out: 16 8



* Copying new config to destination Done

* Repairing Permissions Done

* Deleting Extensions Cache Done



** Done patching - You can reboot now **

 

Please share if there is a solution to my problem.

Thank you,

Neil

STAC9221A2.txt

Link to comment
Share on other sites
14irahtom
14irahtom
Posted
Posted

here's my Conexant Cx20551 (waikiki) audio dump from ubuntu.

 

a lot of ppl with conexant have gotten it to work with hda patcher but when i insert the dump file in it and reboot, i have no sound device. with azaliaaudio i have the icon and the line out/headphones always works. 2ch output from speakers only works if i restart from vista and boot into leopard. if i reboot from leopard and boot back into leopard it wont work...its really weird. i hope someone can help me out here. :unsure:

 

thank you devs for getting us all this far..

codec_dump.txt

Link to comment
Share on other sites
aMuse
aMuse
Posted
Posted

ALC889a

 

Hi everybody,

 

Thanks again for the great work everybody is doing on getting OSx86 as native as possible!

I am running OSx86 on GA-EP35-DS3R board natively, with AppleHDA Patcher and EFI string (without ALCinject) but don't get any output conrols in Audio/MIDI setup (to change 44.1/48/88.2/96kHz). Since this is a very common Codec (almost all GA-P35 boards run with the same ALC889a) has anybody had any success with muliple outs and higher definition?

 

I'll keep trying,

:D

Link to comment
Share on other sites
aMuse
aMuse
Posted
Posted

ALC889a: <Audio/Midi Setup> all working

 

Here is how I got my codec dump (thanks to jedavis1):

1) Got latest Ubuntu from (http://www.ubuntu.com/getubuntu/download) and burned to CD

2) Boot from CD; start <Terminal>; cd /proc/asound/card0/; ls -l;

3) Look for used Codec#nr (nr=2 for my setup), cat codec#nr; copy and paste into Text file editor, Save to USB stick or such (Ubuntu mounts HD in read only)

4) Boot back into OS X and then use this file for patching

 

dragged and dropped codec dump onto AppleHDAPatcherv1.20 and got output working. I can now change the Input/Output sample rates (44.1,48,88.2,96kHz all working) in <Audio/Midi Setup>, built Aggregate Devices for 7.1 Output etc. Very cool for entry level Logic Pro & Garageband users!

 

Thanks for all the help and support to

Taruga and all of his testers!

 

:thumbsup_anim:

Here is my Codec dump:

ALC889a_thcramer.txt

Link to comment
Share on other sites
durain
durain
Posted
Posted

I just wanted to add that HDAudio.kext v3 - It just says that kext loaded successfully. v5 and v6 cause a kernel panic.

 

My spec

 

Toshiba Tecra M9 Core2 Duo running Kalaway 10.5.1 updated to 10.5.2

Sound card: ALC262

Link to comment
Share on other sites
Dcamarinha
Dcamarinha
Posted
Posted
Need your help.

ECS 945GCT-M/1333 V3.0 mother board, E6750 cpu, 1GB memory, running on board G950 video with Kalyway 10.5.1. The docs say it has IDT 92hd202 6-channel Hi Def Audio Codec (good sound in XP and Linux), the attached Linux dump indicates SigmaTel STAC9221 A2. I have tried your patchers from 1.15 to 1.20. I see internal speakers and digital out in the setup screens but no audio output. Here is the last...

...Please share if there is a solution to my problem.

Thank you,

Neil

I have same codec dump, and same problem. And dont works. Anybody can help?

Link to comment
Share on other sites
zonker
zonker
Posted
Posted

I'm new to x86 so this is all confusing to me.

 

I have a BFG nForce 680i SLI mb. It uses the Realtek HD Audio controller in WinXP home. The first page of this shows a lot of stuff but I have no idea which one to use. Can someone point me to the right one to try?

Link to comment
Share on other sites
NidVhegg
NidVhegg
Posted
Posted

Hi, with some kext's from you and some other kext's I now got rear stereo sound on my Gigabyte p35 DS4 v.1 .

I'm really glad that I can hear my mac now! :D

 

But, is it possible to get real 5.1 sound with the Azalia899a ??

 

Please someone make a note, I really want to know that.

If yes, a little help Would be nice.

 

 

~ thanks so far

Link to comment
Share on other sites
eMxyzptlk
eMxyzptlk
Posted
Posted
I'm new to x86 so this is all confusing to me.

 

I have a BFG nForce 680i SLI mb. It uses the Realtek HD Audio controller in WinXP home. The first page of this shows a lot of stuff but I have no idea which one to use. Can someone point me to the right one to try?

 

Check this post, follow the instructions and you should get something like this, this should give you all the information you need to start, for example I know mine is ALC862-VD once a patch is made I'll just run it with the AppleHDA patcher...

 

Hope that helps

Link to comment
Share on other sites
Cardgone
Cardgone
Posted
Posted

Ok, I have been reading through pages fo posts, so if someone knows the answer to this, I missed it. I have an Asus p5l-mx MB that has the ad1986a soundchip on it. I can get sound by using the azalia out coded can the olume slider works perfect, nut no microphone or line in are available. If I use the ad1986 applehda patcher I get line inputs but the volume slider is greyed out and volume can not be adjsuted.

 

IS THERE A SIMPLE SOLUTION TO THIS I MISSED? Or a way to fix it?

 

(I am a newbie to linux and MAC OS, but I am an IT person in windows and I have another gigabyte MB running leopard perfectly with sound,lan, sata, usb, dual screen video and een hardware RAID, so I am capable of doing simple things to fix an issue.)

Link to comment
Share on other sites
soundandvision88
soundandvision88
Posted
Posted

Does anybody know how to get the VIA VT1708 Vinyl Audio working? I found Linux codecs but don't have Linux to make a dump to find out whether or not it's compatible with AppleHDA (which I'm not even sure it would be).

 

Here's a link to the Linux codec in case whoever is reading this is a hero and decides to make a dump for me.

http://driverscollection.com/?H=VT1708&amp...IA&SS=Linux

 

Other than that... any other solutions for the VIA VT1708? Haven't found any solutions on these boards.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...