bongo Posted December 20, 2007 Share Posted December 20, 2007 Taruga, should I report you that this in not working for ALC 861-VD? - I don't think so... You should know that this is not cover ALC 862 ...Unfortunately Link to comment Share on other sites More sharing options...
mactist Posted December 20, 2007 Share Posted December 20, 2007 I am using dell inspiron 1520 and need that sigmatel 9205 codec dump. I have try and use Knooppix and try to run this command on the terminal but unsuccessful. cat /proc/asound/card0/codec#0 > codec.txt I also manually check the folder but the codec seems to have 0kb files. So i am wondering if anyone can give me the codec dump. TQ Here are two codecs for you! stac9205.txt sigmatel9205.txt Link to comment Share on other sites More sharing options...
wenecon Posted December 20, 2007 Share Posted December 20, 2007 (edited) Should HDAPatcher work for Realtek HD Audio 268 in my ACER 7720G laptop? Please answer me. Edited December 21, 2007 by Taruga Not yet ! Link to comment Share on other sites More sharing options...
LoboBjörn Posted December 20, 2007 Share Posted December 20, 2007 (edited) Sorry Taruga. Tested it first thing thing morning. The first kexts didn't work. No sound or volume controls. The second one is great! I finally have sound on my Asus F3JC. You made my day, man! A friend of mine, with F3JC also, reported sound working. But no sound coming out of the headphones... (same here) but, who cares! We got SOUND!!!!!!! PS. Do you think it'll work with ALC861 on Toshiba A100? I got it to work with Azalia. I think it is recognised as an ALC880 or something on linux, but on Toshiba's site it is said to be an ALC861. We are going over to Paypal. You deserve it! Thanks! Taruga: Thanks for your report, I can only improve things if I get reports (good or bad). I don´t have a way of testing as I only have alc882, so you all are my testers. And much has been done until now this way. JJDuro also reported the same problem with headphones, I will try to fix it later as I have a lot more to do before it. Do you have mic working ? As for the Toshiba, if you can try the HDAudio.kext I have on other thread (there are instructions there) it will report the correct vendor and model I need. Yes, Mic is working real fine. I'll try HDAudio.kext as soon as I get my hands that Toshiba. It's my girlfriends and she loves it. Thanks Edited December 20, 2007 by Taruga That wiki link doesn´t look very good to me :P Link to comment Share on other sites More sharing options...
bari86 Posted December 21, 2007 Share Posted December 21, 2007 Here are two codecs for you! the problem i am facing now is that when i use 1.2 with those codec dump, when i want to restart/shutdown my mac after updating it, kernel panic will appear. so i dont think the update process are complete because of the kernel panic. what i have done is that i try to use 1.20 first. then some post said maybe 1.16 are working.so i tried that also. then i try back 1.20 with the codec dump u gave me but still the same prob. and still no sound. so anyone succed using this codec? please let me know. TQ. Link to comment Share on other sites More sharing options...
wenecon Posted December 21, 2007 Share Posted December 21, 2007 Taruga , I tried it with AzaliaAudio.kext and patched my device id and vendor id. It works , that means it plays the sound and i have volume control but nothing coming out of my machine and it does not see audio in sys profiler. But it is playing the sound. Could it be I have to tell my machine where the PCI is or something? When I boot with Ubuntu Gutsy Gibbon , the same thing happens. everything looks good but no sound out of machine. Link to comment Share on other sites More sharing options...
MacintizeD Posted December 21, 2007 Share Posted December 21, 2007 (edited) Hi Taruga. I am a concern with the new alc861 kext and I haven't gotten a feedback from you yet. so I think it's good for me to mention it again 1. When I boot up, I hear loud popping noises from my speaker at the end of the white boot screen (and some afterwards when the desktop loads up) Is there anyway to fix that? Edited December 21, 2007 by Taruga I don´t know why, ask some one with the same codec to see if they have the same issue Link to comment Share on other sites More sharing options...
openxs Posted December 21, 2007 Share Posted December 21, 2007 Hi, I recently installed Leopard (Toh) on Asus P5LD2 VM SE, but I can't get sound to work even after applying the ALC882 patch. Should I delete the existing ktext from system/library/extension first? I would appreciate any help. Thanks. Link to comment Share on other sites More sharing options...
LoboBjörn Posted December 21, 2007 Share Posted December 21, 2007 Yes, Mic is working real fine. I'll try HDAudio.kext as soon as I get my hands that Toshiba. It's my girlfriends and she loves it. Thanks Taruga, I've updated my signature. Happy now? Link to comment Share on other sites More sharing options...
mactist Posted December 21, 2007 Share Posted December 21, 2007 the problem i am facing now is that when i use 1.2 with those codec dump, when i want to restart/shutdown my mac after updating it, kernel panic will appear. so i dont think the update process are complete because of the kernel panic. what i have done is that i try to use 1.20 first. then some post said maybe 1.16 are working.so i tried that also. then i try back 1.20 with the codec dump u gave me but still the same prob. and still no sound. so anyone succed using this codec? please let me know. TQ. If you are running leopard then you should use the HDAPatcher version 1.17 and 1.18 only. I have the same card and could not get it working. Check this topic: http://forum.insanelymac.com/index.php?showtopic=75780 Link to comment Share on other sites More sharing options...
PabloPCX Posted December 21, 2007 Share Posted December 21, 2007 HP Pavilion DV2000 Conexant CX20551 (Waikiki) Mac OS X Leopard 10.5.0 AppleHDA Patcher - 2006/2007 by Taruga v1.20 * Patching AppleHDA.kext to 0x14f15047 Done * Checking AppleHDA for patch Done 0001f4a0 cmpl $0x14f15047,%eax 00020584 cmpl $0x14f15047,%eax * Checking for SPDIF Out Detected * Checking for SPDIF In Not Detected * Using the following nodes in pathmap Speaker : 19 25 16 Spdif Out: 24 17 * Copying new config to destination Done * Repairing Permissions Done * Deleting Extensions Cache Done ** Done patching - You can reboot now ** No out devices found Audio.tiff Link to comment Share on other sites More sharing options...
Diego Giovany Posted December 21, 2007 Share Posted December 21, 2007 Hi, I try over 50 times to get sound work in my Gigabyte W466U Notebook, that haves alc268 codec. On Azalia Solution, I get the volume control working, buto no sound to hear at all... On AppleHDA patch with the codec dump I get this error when I try to load the generated kext.... please help Toruga, you are the last chance.... sorry by my very bad english.... ALC268CodecDump.txt Link to comment Share on other sites More sharing options...
uismi Posted December 22, 2007 Share Posted December 22, 2007 (edited) Hi, Great work! (really mean it)... But I can't get sound in/out of my Intel D101GGCL Onboard Realtek ALC861 (Vendor ID: 0x10ec0861 / Device ID: 0x437B1002), and I know that this new driver have to recognize it. I just wondering what went wrong? I doesn't have the AppleAzaliaAudio.kext (like jjduro explains), Is the new driver only for Leopard? (My config now is 10.4.10 / 8.10.1) Can i have a little help? (Really, you guys make posible all Mac OS x86...) Thank you. You're the MAN. ________________________________________________________________________ Taruga: After installing, do the following: Open Applications -> Utilities -> Terminal ioreg -lw0 > /ioreg861.txt It will create a file named ioreg861.txt , send me that file to take a look. Thanx Edited December 22, 2007 by Taruga Link to comment Share on other sites More sharing options...
Eesh Dewan Posted December 22, 2007 Share Posted December 22, 2007 For ALC268 Users. I have Acer 4710 Laptop with ALC268 sound chipset. I got it to work under 10.4.8 and 10.4.10 using azalia audio package. I get sound out through speakers and volume control. No audio in and have not tested the jacks. I too wait to use the ALC268 fully when Taruga comes with a solution. Eesh Dewan Link to comment Share on other sites More sharing options...
triple675 Posted December 22, 2007 Share Posted December 22, 2007 This is a wonderful app. Thanks! I got the codec dump via ubuntu and used your patcher. Reboot. Behold everything is listed under "Sound". The only problem is I can't hear any sound from any of the channels. I can increase/decrease volume. Everything seems to be intact but no sound. Could be something simple. Setup is Kalyway 10.5 on Acer 5920 with ALC883 (ICH8) HDA (but the codec generated via Linux is for ALC888) could this be the problem? BTW, after installing Kalyway sound was working but only speakers, no digital, no mic, no input. That's the reason for applying this patch. Thanks! Hope someone can shed some light on this matter. Link to comment Share on other sites More sharing options...
pkmoazzam Posted December 22, 2007 Share Posted December 22, 2007 hello guys, i have a problem with sound, here my sound config: ADI® AD1988B 8-channel High Definition Audio CODEC any idea? where can i find a patch for this sound config? thanks man Link to comment Share on other sites More sharing options...
MoDs Posted December 22, 2007 Share Posted December 22, 2007 Taruga: Thanks so much man, my sound out/in works on leopard, and thanks to you Got a question though, is there anyway i can get a quadraphonic out? I tried Audio Midi setup and i only could here sound from the four speakers in that app (after creating an aggregate), but at iTunes, QuickTime, VLC, ... i still get sound from the front two speakers only. I'm willing to donate if it's possible to get a quadraphonic sound out working on leopard PS: I have Realtek ALC888 HD (ICH7) Please reply soon Thanks again! Link to comment Share on other sites More sharing options...
bajtek Posted December 22, 2007 Share Posted December 22, 2007 (edited) Hi taruga, I've just launched your AD1986 0x11d41986. Still no sound but there is a progress. In sound preferences I can see outputs and inputs (see atteched picture) I'll will be happy to help you with that what are your commands? Edited December 22, 2007 by Taruga What is your motherboard vendor (or notebook) ? Seems it´s working on Asus P5LMX but with some issues to fix (no volume control). But it was reported working line out, headphone on this model. Not tested spdif and inputs Link to comment Share on other sites More sharing options...
pengdong Posted December 22, 2007 Share Posted December 22, 2007 Taruga!!!Help me, codec is Pastes on Codec: Analog Devices AD1986A Address: 0 Vendor Id: 0x11d41986 Subsystem Id: 0x1043818f Revision Id: 0x100500 Default PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital PCM: rates [0x60]: 44100 48000 bits [0x2]: 16 formats [0x5]: PCM AC3 Connection: 2 0x01* 0x06 Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x16 0x16] Power: 0x0 Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x16 0x16] Power: 0x0 Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x16 0x16] Power: 0x0 Node 0x06 [Audio Input] wcaps 0x100511: Stereo PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0x6]: 16 20 formats [0x1]: PCM Power: 0x0 Connection: 1 0x12 Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo Connection: 8 0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18 Node 0x08 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x07 Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x80] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Connection: 2 0x04 0x05 Node 0x0a [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x07* 0x04 0x05 Node 0x0b [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x07* 0x04 Node 0x0c [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x04* 0x07 Node 0x0d [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x05* 0x08 Node 0x0e [Audio Selector] wcaps 0x300100: Mono Connection: 2 0x08* 0x11 Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 8 0x1f 0x20 0x1d 0x1d 0x27* 0x28 0x29 0x2a Node 0x10 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x20 0x1c* 0x1f Node 0x11 [Audio Selector] wcaps 0x300941: Stereo Connection: 2 0x0f* 0x2b Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 8 0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23 Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x9f 0x9f] Connection: 1 0x11 Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Connection: 1 0x23 Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x19 0x19] Connection: 1 0x22 Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x21 Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x10 Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x8f] Connection: 2 0x19* 0x24 Node 0x19 [beep Generator Widget] wcaps 0x700000: Mono Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x16 0x16] Pincap 0x081f: OUT HP Detect Pin Default 0x02214021: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Connection: 1 0x0a Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f] Pincap 0x081001f: OUT HP EAPD Detect Pin Default 0x01014011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0x40: OUT Connection: 1 0x0b Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0837: IN OUT Detect Pin Default 0x01013012: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Connection: 1 0x0c Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x081737: IN OUT Detect Pin Default 0x01019015: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Connection: 1 0x0d Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x501700f0: [N/A] Speaker at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x0e Node 0x1f [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Pin Default 0x02a190f0: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Node 0x20 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Pin Default 0x018130f0: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Node 0x21 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0827: IN Detect Pin Default 0x509700f0: [N/A] Aux at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x20: IN Node 0x22 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x993310f0: [Fixed] CD at Int ATAPI Conn = ATAPI, Color = Black Pin-ctls: 0x20: IN Node 0x23 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x50b700f0: [N/A] Telephony at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x20: IN Node 0x24 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x50f700f0: [N/A] Other at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x20: IN Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x0145f0f0: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Other Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x26 [Power Widget] wcaps 0x500500: Mono Power: 0x0 Connection: 8 0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18 Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1f 0x1d Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1f 0x20 Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1d 0x20 Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo Connection: 3 0x1f 0x1d 0x20 Node 0x2b [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x0f Link to comment Share on other sites More sharing options...
keplenk Posted December 22, 2007 Share Posted December 22, 2007 Hi Tagura, Nice work!! Ill be the first one to say this .. Advanced Merry Christmas! I have an ALC262 (from my Sony Vaio CR140E/B laptop) and when I tried using the new 1.20 Patcher, I can now use my Headphones. Two problems though: 1) When I plug-in my headphones (which works) the internal speakers doesnt mute. They both play sound together. I tried to mess up with the Audio properties but still no go. Is there a way to make the headphones work independently? I hope that when I plug in the headphones, the internal speakers should not work. When I unplug it, the internal speakers should work, not both. 2) I don't have mic =( In the INPUT TAB, it doesnt have anything. Just to inform you, this is how I installed it: 1) Just downloaded the AppleHDAPatcherv1.20 and downloaded ALC262_codec_dump (text file?). 2) I put both files in the desktop, dragged and dropped ALC262_codec_dump to the AppleHDAPatcherv1.20 icon 3) The AppleHDAPatcher1.20 did some amazing stuff (lol) and it asked me to reboot. 4) rebooted, and now I headphones work, but still no mic =) Did I miss something here? Like delete something first? Thank you so much! Keplenk Link to comment Share on other sites More sharing options...
bari86 Posted December 22, 2007 Share Posted December 22, 2007 If you are running leopard then you should use the HDAPatcher version 1.17 and 1.18 only. I have the same card and could not get it working. Check this topic: http://forum.insanelymac.com/index.php?showtopic=75780 i have try both 1.17 and 1.18 but same result. no sound. yesterday i just install iATKOS v1.0i. When i start the mac, i saw the are HD output in the sound setting. but when i play music, still no sound. So i try again with 1.2 but same result. 1.18 and 1.17 also same result. how do i create my own codec dump? i have Knoppix. but when i boot and follow the procedure i found in the web, my codec dump file is empty. i also checked manually the path and found out that my file is empty. so is there any way to create codec dump for my 9205? how do i check my vendor id? TQ Link to comment Share on other sites More sharing options...
zs_ftp Posted December 22, 2007 Share Posted December 22, 2007 1986 - its very good! Wanna 1981, PLEASE Dump: Codec: Analog Devices AD1981 Address: 0 Vendor Id: 0x11d41981 Subsystem Id: 0x11790311 Revision Id: 0x100200 Default PCM: rates 0x07f, bits 0x0e, types 0x1 Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital PCM: rates 0x060, bits 0x02, types 0x5 Connection: 2 0x01* 0x04 Node 0x03 [Audio Output] wcaps 0x441: Stereo Power: 0x0 Node 0x04 [Audio Input] wcaps 0x100511: Stereo PCM: rates 0x07f, bits 0x06, types 0x1 Power: 0x0 Connection: 1 0x15 Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0xa2 0xa2] Pincap 0x081173f: IN OUT HP EAPD Detect Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x40: OUT Connection: 2 0x03 0x0e* Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x3f 0x3f] Pincap 0x081f: OUT HP Detect Pin Default 0x0221101f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0xc0: OUT HP Connection: 2 0x03 0x0e* Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x40f000fe: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x0f Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: Pincap 0x081727: IN Detect Pin Default 0x02a11020: [Jack] Mic at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0x24: IN Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0xbf 0xbf] Pincap 0x081737: IN OUT Detect Pin Default 0x40f000fd: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x20: IN Connection: 2 0x03* 0x0e Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x40f000fc: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x0b [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x03 0x0c 0x09 0x0e* 0x05 0x18 Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1e 0x1f Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x87] Connection: 2 0x10* 0x16 Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo Connection: 8 0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d Node 0x0f [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x0b Node 0x10 [beep Generator Widget] wcaps 0x700000: Mono Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f] Connection: 1 0x03 Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x08 Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x09 Node 0x14 [Power Widget] wcaps 0x500500: Mono Power: 0x0 Connection: 13 0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 8 0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17 Node 0x16 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x90f701f0: [Fixed] Other at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x20: IN Node 0x17 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0827: IN Detect Pin Default 0x40f000fb: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x20: IN Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081737: IN OUT Detect Pin Default 0x90a7012e: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x24: IN Connection: 2 0x03* 0x0e Node 0x19 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x40f000fa: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x20: IN Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x05 Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x17 Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x18 Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x19 0x19] Connection: 1 0x19 Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Connection: 1 0x08 Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x18 THANX! Link to comment Share on other sites More sharing options...
uismi Posted December 22, 2007 Share Posted December 22, 2007 Hi, Great work! (really mean it)... But I can't get sound in/out of my Intel D101GGCL Onboard Realtek ALC861 (Vendor ID: 0x10ec0861 / Device ID: 0x437B1002), and I know that this new driver have to recognize it. I just wondering what went wrong? I doesn't have the AppleAzaliaAudio.kext (like jjduro explains), Is the new driver only for Leopard? (My config now is 10.4.10 / 8.10.1) Can i have a little help? (Really, you guys make posible all Mac OS x86...) Thank you. You're the MAN. ________________________________________________________________________ Taruga: After installing, do the following: Open Applications -> Utilities -> Terminal ioreg -lw0 > /ioreg861.txt It will create a file named ioreg861.txt , send me that file to take a look. Thanx The driver works fine, i just post a reply on the report thread that you created for this purpose. Really THANK YOU!. Link to comment Share on other sites More sharing options...
bijoux Posted December 22, 2007 Share Posted December 22, 2007 AD1986A on Asus W3J I tried the ad1986 patch but no success. I have similar results as bajtek ( Post #3123 ) attach is my linux codec dump, if it makes a difference. i'm glad this project is still going on. thank you taruga. hopefully, this issue will be fixed. w3j_codecdump.txt Link to comment Share on other sites More sharing options...
XNT Posted December 23, 2007 Share Posted December 23, 2007 Wow Thanks Taruga just got sound fully working on Leopard 10.5.1 with my Asus P5KC. I've attached my Linux Codec Dump, made my dump with Ubuntu 7.10 883_Asus_P5KC_codec_dump.txt Link to comment Share on other sites More sharing options...
Recommended Posts