Jump to content

AppleHDA Solution - Work in progress

Taruga

By Taruga,
in AppleHDA

 Share
4,108 posts in this topic

Recommended Posts

:: Valdemar ::
:: Valdemar ::
Posted
Posted
this is my codec dump from linux can someone help me i have tried patcher 1.20 and 1.19 with no luck azaila works but i want headphone output

any help is apreciated ... :( ...(codec DUMP)

 

Hey Datriad, can you tell us if you could hear any sound from the internal speakers or another kind of signal??, the Azalia ALC861-VD (known in Windows as Realtek ALC-862) Owners is growing, so is good to know ANY info about your experience installing this codec.

 

all we know (so far, at least myself) is that the codec 'runs', is recognized by the system (System Preferences, Speaker icon on top right taskbar), but we can't hear anything from any route or signal source. :blink:

 

Cheers

Link to comment
Share on other sites
wenecon
wenecon
Posted
Posted

I have ALC268 and patched with HDAPatcher 1.19. All goes well but in the readout it says nothing behind speakers:.

 

In Leopard I have volumecontrol and iTunes is playing but no sound. There is also no sound detected in "more info".

In preferences it says Realtek HD Audio in Output.

 

I am very confused now. Any Help?

Link to comment
Share on other sites
nenad5
nenad5
Posted
Posted

Hi,

 

I have also tried Patcher 1.20 with ALC268 on hpdv6251 laptop, everything goes well but when I try to load appleHDA.kext I am getting following error:

 

can't add kernel extension AppleHDA.kext (not a bundle) (run kextload on this kext with -t for diagnostic output)

 

 

I've tried this both on leopard and on 10.4.10 with the same result.

 

Any help?

 

 

I am attaching my codec as well

codecalc268.txt

Link to comment
Share on other sites
hel
hel
Posted
Posted

Could someone tell me if there is possibility to turn on sound 5.1 mic-in on ALC888 - Gigabyte GA-P35-DS3L IntelP35/ICH9/PCI-E*16 rev. 1.0?

Which one of OS lines Tiger Panter Leopard subversion will do with driver if so?

Thanks for any response.

Link to comment
Share on other sites
arissuares
arissuares
Posted
Posted

Im using leo from ToH final release kernel 9.0.0 and the only patch work for my realtek ALC882 is v1.20

Other version does not resurect the front panel. One problem is

I cannot shutdown my laptop (MSI megabook 1022) with the patch installed (1.2)

Restarting is fine but when i go poweroff from menu my LCD got blank,

the disc indicator went off but my power button still shine-- waited for 3 hours but still.

 

Others patch or without patch it doesnt have any problem of shuting down.

but again...dos not have front panel.

Any idea ? Why is that o0o mighty Taruga...?

What have i done...?

 

thanks taruga

Link to comment
Share on other sites
thysm00
thysm00
Posted
Posted

Hi i've also posted in another thread, but i have problems with my audio out. I have a alc889a it was working wonderfully but i broke it by pluging the output from my monitoring speakers in the stereo output. So i broke the left channel... :D

Does someone know how to change the mapping? I have 6 stereo plugs on this motherboard and only 3 are used, maybe if i change the stereo output to another plug it could work.

Link to comment
Share on other sites
agent-squirrel
agent-squirrel
Posted
Posted
I have a Dell 1505 with the Sigmitel9200. I run the applehdapatcher and drag the sigmatel9200.txt file to it and nothing happens. is it suppose to make an output file that I can then install on the PC? what am I doing wrong??Thanks Merlin
You dont run the HDA Patcher you just drag the Sigmatel 9200.txt file onto the icon that you would use to launch the HDA Patcher and it will run then prompt you for your password then patch your sound drivers.I have an Acer Aspire 5720 notebook which apparently uses the ALC268 Codec. After installing leopard i could see the volume control and my device was listed as HDA Audio But i had no sound so i have tried to patch it with HDA Patcher using several .txt files including my own Ubuntu generated one to no avail. Is this Particular Codec supported?
Link to comment
Share on other sites
3ng1and
3ng1and
Posted
Posted

I'm in desperate need for some help. As I am 85% on my Alienware m5550. Currently my sound is not working completely using the beta4some861_880models. For some reason my internal speakers showed up in the input section rather than output, stopping my sound from working, as this is the last thing I need to complete before I buy my Dell 1500 to finish the system off, I am really trying to push getting this done and am getting frustrated with no improvment. I have the 945gm ALC880 ICH7.

 

Vendor Id: 0x10ec0880

Subsystem Id: 0x8800000

 

Thanks

Link to comment
Share on other sites
Headrush69
Headrush69
Posted
Posted

After countless reboots I've been able to reproduce the odd behavior I was having.

 

Using my Linux codec dump and HDApatcher v1.13 I get a working audio system. (Digital Out, Line Out, Mic all good)

If I reboot audio no longer works or appears in sound preferences.

Rerunning HDApatcher v1.13 again doesn't help.

 

Heres the weird part:

If I now use my codec dump with HDApatcher v.120 and reboot, i still don't have audio, but by doing this, if I try HDApatcher v1.13 again i get working audio once more.

 

Of course the cycle repeats and if I reboot I lose audio again.

 

Taruga, can you list the non-patching operations that v1.13 and v.120 are doing. Hopefully that might help in narrowing down what the real issue is.

(non-patching operations = repairing permissions, deleting cache files, erasing Extensions.mkext, for example)

Link to comment
Share on other sites
douche
douche
Posted
Posted
You can run the patcher over and over again because it always creates a new ALCinject.kext and AppleHDA.kext

obs: The patcher deletes azalia if it finds it.

 

Oh, i see you edited my post in response to it. You want to keep your post no. down? Anyways, can i run different version (e.g. 1.12, 1.15, etc.) over again or just the SAME version? Also, how would i restore everything back to default? (i.e. the way it was before i used AppleHDA).

Link to comment
Share on other sites
richtig
richtig
Posted
Posted

Can anyone comment on the best version of "boot and run from CD" Linux to use for getting a "Linux code dump"?

Maybe I did something incorrectly, but Linspire 2.03 didn't work for the purpose.

Followed the instructions here:

http://forum.insanelymac.com/lofiversion/i...php/t44972.html

I've used Ubuntu and Knoppix before. Would either of those work, or is some other Linux version better?

Since the target system is a P35 Intel chipset system with ALC662 audio chip, would only the "very latest" Linux version do what I'm looking for?

Thanks in advance.

Link to comment
Share on other sites
Vlace
Vlace
Posted
Posted (edited)

Is there a solution for this?...

 

" *Detected unsupported \f0\fs26 Codec "

 

Version 1.20

 

 

Thanks

Edited by Taruga
You´re using a file with Rich Text format and it needs to be Plain Text. Read the FAQ for more info
Link to comment
Share on other sites
agent-squirrel
agent-squirrel
Posted
Posted
Can anyone comment on the best version of "boot and run from CD" Linux to use for getting a "Linux code dump"?

Maybe I did something incorrectly, but Linspire 2.03 didn't work for the purpose.

Followed the instructions here:

http://forum.insanelymac.com/lofiversion/i...php/t44972.html

I've used Ubuntu and Knoppix before. Would either of those work, or is some other Linux version better?

Since the target system is a P35 Intel chipset system with ALC662 audio chip, would only the "very latest" Linux version do what I'm looking for?

Thanks in advance.

 

well the newest ubuntu, 7.10 gutsy gibbon gave me a codec dump quite happily. I cant speak for the live cd, as i am actually dual booting it with mac os x, but it should work.

Link to comment
Share on other sites
richtig
richtig
Posted
Posted
well the newest ubuntu, 7.10 gutsy gibbon gave me a codec dump quite happily. I cant speak for the live cd, as i am actually dual booting it with mac os x, but it should work.

Thanks, the ubuntu 7.10 Live CD worked.

However, instead of:

"cat /proc/asound/card0/codec#0 > /Desktop/[codec dump filename].txt"

I needed to use:

"cat /proc/asound/card0/codec#2 > /Desktop/[codec dump filename].txt"

++++++++++

Edit: sound is now working in Leo 10.5.0.

Used the v. 1.20 HDA patcher & attached codec dump from Ubuntu 7.10 (re-done as a unix file using BBE).

codec_ALC662.P35.txt.zip

Link to comment
Share on other sites
craze
craze
Posted
Posted

for me in leopard 10.5 i tried 1.18,1,19 and 1.20 out of which 1.20 is working for my linux codec. i get 3 options in sound" lineout,internal speakers and digital output from that only lineout or sound from the laptop is coming no headphones. i have lenovo 3000 y500

 

my codec dump for alc262 from ubuntu 7.10 livecd

codec.txt

Link to comment
Share on other sites
Alexxsis
Alexxsis
Posted
Posted

;):lol::) :) :):P:D :D

 

Report! Have complete success on Asus P5LD2 with Realtek ALC 882 HD Audio, Apple HDA patcher 1.20 and asus_n4l_vm_ALC882M.txt codec dump http://psykopat.free.fr/apple/AppleHDA/rea..._vm_ALC882M.txt

 

Have got all in\out ports open, even green speaker output! Ports are the same as in Vista.

But still haven't any information about sound in System Profiler (who cares??)

 

P.S. My Config..

Mac OS X 10.4.9 Uphuck 1.4i

Asus P5LD2 i945 (ICH7-M AHCI) with ALC 882 HDA

I Core2Duo 6420 (2.13Ghz ISpeedstap Enabled)

4 Gb PC6400 DDR2

Gigabyte GF 7600 GT 256mb (NVinject 0.1.5)

2x160Gb HDD WD

HP Supermultidrive 940d

Marvell Yukon 1gb netcard

 

THX everyone for all!

 

TARUGA, presonal respect!!! Doin' great job!

Link to comment
Share on other sites
inc188
inc188
Posted
Posted

okay boys...

 

i followed this faq http://forum.insanelymac.com/index.php?showtopic=74937

 

got the codec_dump.txt got the patcher... i tried 1.19, 1.18, and 1.2 and still no sound..

 

i have a leopard and ADI 1983 sound....

 

any one knows what i am doing wrong?

 

then 1.2 patcher didnt work for me but the 1.19 and 1.18 says it patched it but no luck..

 

cheers

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...