b:z Posted December 2, 2007 Share Posted December 2, 2007 Have you tested the patcher with this codec ? I don't the status of it, if it works or not.One thing I will do, is to create a reference page to check codec status, it is working or not, if it need more work, if doesn´t work at all, which hardware was tested, etc. It will help us all. yes, i have. But it show as "Detected unsupported Sigmatel Codec" Please check my signature for specific hardware which installed leopard. Thanks so much for your help. Link to comment Share on other sites More sharing options...
Taruga Posted December 2, 2007 Author Share Posted December 2, 2007 yes, i have. But it show as "Detected unsupported Sigmatel Codec" Please check my signature for specific hardware which installed leopard. Thanks so much for your help. Open the codec file with TextEdit and check if on the menu Format shows Make Plain Text. If it shows, choose it and save. If it´s already in plain text, then try moving both the patcher and the codec dump to a usb pen, to other hard disk, to the root of the disk, etc and try again. Some of you had problems with paths before. My patcher doesn´t decode Rich Text Files and some of you are using that format. Link to comment Share on other sites More sharing options...
b:z Posted December 2, 2007 Share Posted December 2, 2007 Open the codec file with TextEdit and check if on the menu Format shows Make Plain Text. If it shows, choose it and save. If it´s already in plain text, then try moving both the patcher and the codec dump to a usb pen, to other hard disk, to the root of the disk, etc and try again. Some of you had problems with paths before.My patcher doesn´t decode Rich Text Files and some of you are using that format. The codec is in plain text. I have tried to move it and AppleHDAPatcher to USB pen. Run again, and it also show the same message " Detected unsupported Sigmatel Code" Link to comment Share on other sites More sharing options...
Taruga Posted December 2, 2007 Author Share Posted December 2, 2007 The codec is in plain text. I have tried to move it and AppleHDAPatcher to USB pen. Run again, and it also show the same message " Detected unsupported Sigmatel Code" Must be a bug then... let me check Link to comment Share on other sites More sharing options...
b:z Posted December 2, 2007 Share Posted December 2, 2007 Yes, hope it will works on my leopard. I am waiting for you. Thank you very much. Link to comment Share on other sites More sharing options...
Taruga Posted December 2, 2007 Author Share Posted December 2, 2007 Must be a bug then... let me check Nope, you have DOS line breaks on your dump, you need unix line breaks Here is a fixed one: (test it and report of it works or not) Link to comment Share on other sites More sharing options...
macgirl Posted December 2, 2007 Share Posted December 2, 2007 Hey Taruga, the X Lab space is already done, and you can moderate there. Should we move this thread, or do you want to create a new one there? http://forum.insanelymac.com/index.php?act...mp;CODE=leaders Link to comment Share on other sites More sharing options...
Taruga Posted December 2, 2007 Author Share Posted December 2, 2007 Hey Taruga, the X Lab space is already done, and you can moderate there. Should we move this thread, or do you want to create a new one there? http://forum.insanelymac.com/index.php?act...mp;CODE=leaders I already answered Sabr Pm to move it Link to comment Share on other sites More sharing options...
macgirl Posted December 2, 2007 Share Posted December 2, 2007 Great. see you there Link to comment Share on other sites More sharing options...
Sabr Posted December 2, 2007 Share Posted December 2, 2007 Well, here we are. Enjoy X-Labs! Link to comment Share on other sites More sharing options...
b:z Posted December 2, 2007 Share Posted December 2, 2007 Nope, you have DOS line breaks on your dump, you need unix line breaks Here is a fixed one: (test it and report of it works or not) Yes, now i can patch, however no sound device after i reboot. Please see the result in attachment: patch___result_of_9271D.rtf After reboot, i check in "Sound" section: Sound Effects, Output and Input does not change or update anything It seems the sound driver is not been activated. Does it show any sound input and sound output devices ? Get me some screenshots of it if you can And, get an ioreg Do: ioreg -lw0 > /stac9721d.txt and send me that file Link to comment Share on other sites More sharing options...
b:z Posted December 2, 2007 Share Posted December 2, 2007 And, get an ioreg Do: ioreg -lw0 > /stac9721d.txt and send me that file Here is the result of ioreg command. stac9721d.txt For the screenshot, i am sorry. I don't know how to take the screenshot under Leopard PC please instruct me. Thank you. Link to comment Share on other sites More sharing options...
Taruga Posted December 2, 2007 Author Share Posted December 2, 2007 Here is the result of ioreg command. stac9721d.txt For the screenshot, i am sorry. I don't know how to take the screenshot under Leopard PC please instruct me. Thank you. Screenshoot - full screen: cmd + shift + 3 - select area: cmd +shift + 4 But according to your ioreg you should not have sound devices showing up, applehda was not loaded Maybe an error of mine in the mic section or something more. Try this one... Link to comment Share on other sites More sharing options...
ghost8888 Posted December 2, 2007 Share Posted December 2, 2007 Nope, you have DOS line breaks on your dump, you need unix line breaks Hi Taruga, I have having the similar message as b:z when using V1.8 patcher, "Detected unsupported cmedia codec" Wonder my dump have DOS line breaks in it? attached my codec dump file. mine is CM19880L on board the MSI 915P NEO2 . I only have sound in line out, but the volume control is grey out. The system preference sound output show HD audio output. And the system profile did not detect and built in Sound hardware. Cmedia.txt Link to comment Share on other sites More sharing options...
Taruga Posted December 2, 2007 Author Share Posted December 2, 2007 Hi Taruga, I have having the similar message as b:z when using V1.8 patcher, "Detected unsupported cmedia codec" Wonder my dump have DOS line breaks in it? attached my codec dump file. mine is CM19880L on board the MSI 915P NEO2 . I only have sound in line out, but the volume control is grey out. The system preference sound output show HD audio output. And the system profile did not detect and built in Sound hardware. no support yet for your codec, message is correct Link to comment Share on other sites More sharing options...
tiger81 Posted December 2, 2007 Share Posted December 2, 2007 Taruga, help! I use the alc883's code from Ubuntu, the speaker do not work, the earphone do not work too, but when i select speaker output the earphone can work, very strange！ My os is leopard！ alc883.txt Link to comment Share on other sites More sharing options...
Taruga Posted December 2, 2007 Author Share Posted December 2, 2007 Taruga, help! I use the alc883's code from Ubuntu, the speaker do not work, the earphone do not work too, but when i select speaker output the earphone can work, very strange！ My os is leopard！It must be a notebook, not a desktop... correct ?I will make something for you to try Link to comment Share on other sites More sharing options...
tiger81 Posted December 2, 2007 Share Posted December 2, 2007 Sorry, my english is very poor! Yes, my computer is a nootbook, you are right! Thanks! Link to comment Share on other sites More sharing options...
Markelecguitar Posted December 2, 2007 Share Posted December 2, 2007 Ok guys i was wonderin if you could help Running Toh RC2 leopard on a dell precision M65 I have a Sigmatel 9200, r so it says in my BIOS Can someone give me the right patch version for this and a codec dump or a guide how to make one because i have linux on this pc and can do that if required Link to comment Share on other sites More sharing options...
Nuphor Posted December 2, 2007 Share Posted December 2, 2007 Taruga, Attached is a copy of a dump I took for my SigmaTel STAC9274D on an Intel Bad Axe 2 motherboard. I could use 1.16 of the patcher to get stereo audio working under Leopard - 1.17/1.18/1.18.1 seem to patch OK but I'm left with no audio. This isn't really the problem though, the problem is that mute just doesn't seem to work for me. I've had a look around here and it seems I'm not alone in encountering this problem, and I wondered if you'd come across any sort of solution. Thanks! STAC9274D.txt Link to comment Share on other sites More sharing options...
!!___!! Posted December 2, 2007 Share Posted December 2, 2007 Hi guys! I have a sigmatel 9205 ... im wondering if this one will work with the new patcher 2.00?! Atm there is no chance to get it working in leo, right? Link to comment Share on other sites More sharing options...
b:z Posted December 2, 2007 Share Posted December 2, 2007 Screenshoot - full screen: cmd + shift + 3 - select area: cmd +shift + 4 But according to your ioreg you should not have sound devices showing up, applehda was not loaded Maybe an error of mine in the mic section or something more. Try this one... Using the new AppleHDA patch, however the sound still can't be detected Please check the result of patched. patch___result_of_9271D___01.rtf Link to comment Share on other sites More sharing options...
Nuphor Posted December 2, 2007 Share Posted December 2, 2007 b:z, Try using AppleHDAPatcher_v1.16.zip from first post here: http://forum.insanelymac.com/index.php?showtopic=32859 Link to comment Share on other sites More sharing options...
b:z Posted December 2, 2007 Share Posted December 2, 2007 b:z, Try using AppleHDAPatcher_v1.16.zip from first post here: http://forum.insanelymac.com/index.php?showtopic=32859 I still got unable to detect sound card , please check the result: patch___result_of_9271D___02.rtf Link to comment Share on other sites More sharing options...
Taruga Posted December 2, 2007 Author Share Posted December 2, 2007 I still got unable to detect sound card , please check the result:patch___result_of_9271D___02.rtf See post #1, try the kext I posted there and report Link to comment Share on other sites More sharing options...
Recommended Posts