BuXb Posted September 17, 2007 Share Posted September 17, 2007 hey Taruga. Looks as if you got invited to oink . I asked a bunch of people of whom I knew they were members but obvously could not be of any help. Looking at the graph, do you think it is worthwhile if you looked any deeper into the "non supported Conexant" . Just wondering. Cheers, Bugs Link to comment Share on other sites More sharing options...
Taruga Posted September 18, 2007 Author Share Posted September 18, 2007 Hi taruga: Help me please!! I hava a realtek highdefinition alc262, I tried with your patcheer and it said that my driver is not yet supported, then I tried with the drivers testing with the three but I couldn´t load succesfully the ALCInject.kext, I tried in terminal:sudo kextload /System/Library/Extensions/ALCInject.kextand the terminal sends me a messege telling that it could not be loaded succesfully because the kext is not authentic, can you help me out? I tried everything even changin the AppleAzalia.kext with my vendor & device ID, but didn´t work either, this are the specifications of my sound cardCodec: Realtek ALC262Vendor Id: 10ecDevice Id: 0262Subsystem Id: 104D1600Revision Id: 1001This is the device information in properties from windows:HDAUDIO\FUNC_01&VEN_10EC&DEV_0262&SUBSYS_104D1600&REV_1001Hope you can help me, I would really apreciate, you have already did a lot for audio drivers on mac osx86, if you have some time and can help me, maybe if you could help me with the ALCInject.kext install, thanks a lot, bye.After copying kext´s you should do:cd /System/Library/Extensions/chown -R root:wheel ALCinject.kextchown -R root:wheel AppleHDA.kextchmod -R 755 ALCinject.kextchmod -R 755 AppleHDA.kextcd ..rm -f Extensions.mkext rm -f Extensions.kextcachereboot hey Taruga. Looks as if you got invited to oink . I asked a bunch of people of whom I knew they were members but obvously could not be of any help.Looking at the graph, do you think it is worthwhile if you looked any deeper into the "non supported Conexant" . Just wondering.Cheers,BugsI can make some testing stuff for it, but don´t now if it will work. Never tested conexant codecs, unless we try we´ll nevel know : Link to comment Share on other sites More sharing options...
reeiit Posted September 18, 2007 Share Posted September 18, 2007 Hi Taruga. What i can made for you to help in driver development? I have alc861 and bets driver not shows any output/input device. So i can't use HalLab. i've post ioregdump in previous post, what else i can made? thanks. Link to comment Share on other sites More sharing options...
BuXb Posted September 18, 2007 Share Posted September 18, 2007 I can make some testing stuff for it, but don´t now if it will work. Never tested conexant codecs, unless we try we´ll nevel know : great let's do some testing :censored2: . After some "testing" with a bunch of kexts and triple plist editing, random kernel panics at startup finally seem to be gone, so testing-wise I am in a good mood . At this point, do you need anything more from me apart from the Linux codec dump I posted the other day? Link to comment Share on other sites More sharing options...
clockworx Posted September 18, 2007 Share Posted September 18, 2007 Sorry if I missed it with all the various chipset fixes flying around in the last few days, but is there a test release for the ALC862/ALC861-VD that I can try out and submit feedback? Link to comment Share on other sites More sharing options...
superjames2040 Posted September 18, 2007 Share Posted September 18, 2007 Thanks Taruga, your answer was really helpfull, I did what you told me to in the terminal, and it supposed to recognize everything, mic in, headphones out and internal speakers, but I get no sound neither the speakers nor the headphones , I tried with the three testing of ALC262, and none of them works , do you have any idea how can I fix it? In mean time I´m using the AppleAzalia.kext edited with my device & vendor id, but I only get the sound on my speakers, with this it didn´t recognize the headphone out nor the mic in, but at least I have sound. Thanks a lot again, I hope you could tell me some sollution for this, good job, you are the best, good bye. Link to comment Share on other sites More sharing options...
fede77 Posted September 18, 2007 Share Posted September 18, 2007 I got ALC862 working with AppleAzeliaAudio.kext no mic... so I will buy and USB mic. ASUS P5L-MX AppleAzaliaAudio.kext.zip hd_audio_output.tiff Link to comment Share on other sites More sharing options...
Flawless Oddity Posted September 18, 2007 Share Posted September 18, 2007 I was able to get audio out of my ALC-883, and I have a Gigabyte GA-945GZM-S2 motherboard. Everything works fine except my headphone jack isnt working, mic does. I have JaS 10.4.8 upgraded to JaS 10.4.9 Combo, and then upgraded to 10.4.10(not sure who made it, I believe Kool-something). In XP the jack works fine, for a while I thought I may have connected the front jacks to the mobo wrong, but I didn't. I used ALC883Audio.mpkg that got my audio working, only thing now is just the headphone jack. Any suggestions? ALC883Audio.mpkg.zip Link to comment Share on other sites More sharing options...
clockworx Posted September 18, 2007 Share Posted September 18, 2007 I got ALC862 working with AppleAzeliaAudio.kext no mic... so I will buy and USB mic. ASUS P5L-MX I have my audio working via AppleAzalia, but it's on a laptop and the sound doesn't route to the headphones when they are plugged in. That's why I was hoping for a patched AppleHDA version instead. Link to comment Share on other sites More sharing options...
maslokm Posted September 18, 2007 Share Posted September 18, 2007 (maslokm @ Sep 9 2007, 10:47 PM) Hello Taruga, I have HP notebook with AD1981. I have sound card visible, but the mute led is still on and there is no sound - i think that this is a problem with hp notebooks (i tried 1.13 and newer patchers). Please help HP users, you are our last hope. This is my codec dump (HP NX7400,ey508es). Hi Taruga, I have HP notebook (nx6310) with AD1981 too, and i have sound card visible but there is no sound. My notebook haven't mute led, but i think that is the same problem. Can you help we? Thanks! Taruga no hope for HP users with AD1981? Please help us. Link to comment Share on other sites More sharing options...
jonyb7 Posted September 19, 2007 Share Posted September 19, 2007 Hi Taruga, I have HP notebook (nx6310) with AD1981 too, and i have sound card visible but there is no sound. My notebook haven't mute led, but i think that is the same problem. Can you help we? Thanks! Taruga no hope for HP users with AD1981? Please help us. i have same problem with my Nx7300, Taruga wie need help !! Link to comment Share on other sites More sharing options...
antic Posted September 19, 2007 Share Posted September 19, 2007 Hello Taruga! Have mobo Asus P5LD2 SE .. and so far had sound (Line Out) when installed AzaliaAudio.pkg ... so but wanted more outputs and input and tryed AD1986a.txt with AppleHDA Patch 1.16 and now I have some noise in my headphones, in audio preferences there is shown that I have Line Out and Digital Out, but volume slider is not working... and no sound... In mobo manual says, that I have ADI1986A 6-ch Audio CODEC, Jack Sensing and Enumeration, S/PDIF out interface... So must be the right codec .. so maybe someone got it work? Is there any way that I can uninstall or backroll AD1986a.txt with AppleHDA Patch 1.16 ? Are you sure that your audio is via ADI1986A. I thought all the P5LD2 models used ALC882 codecs Link to comment Share on other sites More sharing options...
metronet Posted September 19, 2007 Share Posted September 19, 2007 Hi Taruga, I have a P5K Deluxe (FW 0503). Any chance of getting my ADI AD1988B 8-channel audio to work? Currently I only have 2ch output, any chance on getting supports from your driver project? Link to comment Share on other sites More sharing options...
MorphewS Posted September 19, 2007 Share Posted September 19, 2007 What codec work PERFECTLY, with mic and 5.1? I will buy a new MB. Plis help me I need a fully osx sound, to use Skype, thx. Link to comment Share on other sites More sharing options...
Lukeboba Posted September 19, 2007 Share Posted September 19, 2007 Hi everyone, fed up with my Vista system, I decided to try to make my notebook become a hackbook. And thanks to all the guides and the information available on this forum I got a nearly full working 4.10 sytem within a few days The only component which drives me crazy is my sound device. Intel HDA with Realtek 268 chipset. Although beeing recognized as output device (High Definition Audio), neither the speakers nor the headphone port sound at all. An input device is not beeing recognized. I looked for and tried out different solutions but as it seems, no definitve solution has been found so far for the alc268 chipset. Anyway, since the last time someone posted a "help-request" for the 268 has been a while ago, I am wondering if people just gave up or found a solution by themselves. Is there anybody out there with a working alc268? Luke Link to comment Share on other sites More sharing options...
cagoenbillgates Posted September 19, 2007 Share Posted September 19, 2007 same problem here with nx7300, all working (network, wlan, sleep) but no audio. With azalia I get "HD Audio Output" but no sound from speakers or headphones Link to comment Share on other sites More sharing options...
jonyb7 Posted September 19, 2007 Share Posted September 19, 2007 same problem here with nx7300, all working (network, wlan, sleep) but no audio. With azalia I get "HD Audio Output" but no sound from speakers or headphones what osx verison do oyu have? Link to comment Share on other sites More sharing options...
cagoenbillgates Posted September 19, 2007 Share Posted September 19, 2007 10.4.10 it's a pity... But i'm happy for the rest of components working, including apple software updates. I managed one time to get led out of no-dound state and be able to rise and low volume, but no sound came from speakers, audio out or even the mic port Link to comment Share on other sites More sharing options...
jonyb7 Posted September 19, 2007 Share Posted September 19, 2007 10.4.10 it's a pity... But i'm happy for the rest of components working, including apple software updates. I managed one time to get led out of no-dound state and be able to rise and low volume, but no sound came from speakers, audio out or even the mic port do you have to fix network after instalation, or everything working out of box (lan, wlan, dual core) with 10.4.10? Link to comment Share on other sites More sharing options...
aylamrin Posted September 19, 2007 Share Posted September 19, 2007 Hallo Taruga, I'm using Sigmatel 9227 on a 10.4.10. Now I tried the latest files (vipersporthp). I also tried the HALLab2(since HALLab won't run). While I'm running that, I'm *always* getting Yes in "Running Somewhere" field, i.e. regardless of the fact that I Play or Pause iTunes. (please see attachments) Hallo Taruga, Could you have time to go through my post? (# 2380). If you'd like me to do some testing on STAC 9227, please let me know. I'd be more than happy to be useful!!! Link to comment Share on other sites More sharing options...
consolation Posted September 19, 2007 Share Posted September 19, 2007 Are you sure that your audio is via ADI1986A. I thought all the P5LD2 models used ALC882 codecs All -VM do, -SE come in two flavours 1986A and 882. So if you don't want mATX and your region got the 1986A P5LD2 version, you really are hanging out for a fix, hint... hint... Link to comment Share on other sites More sharing options...
futurcorerock Posted September 20, 2007 Share Posted September 20, 2007 Any progress on the Realtek 862? Link to comment Share on other sites More sharing options...
superjames2040 Posted September 21, 2007 Share Posted September 21, 2007 allright, I have to report a full succes on my fjs e series with alc262! Now I have sound in my speakers and on headphones! Thanks Taruga, u dis a great job:) how did you get this?? with drivers testing of ALC262??? because I tried and get everything recognized but no sound on speakers nor headphone, what exactly did you did?? please need help with I´m running only with Azalia drivers and only get the speakers neither the headphones nor the mic in it´s working, please help me, ciao. Link to comment Share on other sites More sharing options...
cloudrainstar Posted September 21, 2007 Share Posted September 21, 2007 Seems ALC262 drivers are only working for Fujitsu laptops? Link to comment Share on other sites More sharing options...
roccotocco Posted September 21, 2007 Share Posted September 21, 2007 Please, please, Big Taruga, helpe all users with the alc262 realtek codec. Tanks, Tanks, Tanks,Tanks, Tanks, Tanks,Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks, Tanks,Tanks, Tanks, Tanks. Now I have logic pro 8 new user. Link to comment Share on other sites More sharing options...
Recommended Posts