Jump to content

AppleHDA Solution - Work in progress

Taruga

By Taruga,
in AppleHDA

 Share
4,108 posts in this topic

Recommended Posts

OcciJano
OcciJano
Posted
Posted

Hi Taruga

 

My motherboard is an Intel D945GTPLR with Sigmatel 9223. AppleHDAPatcher_v1.10 is the best patch for me cos it´s giving me sound output (Headphones), sound input (Internal microphone). I can't test Digital Out, but it turns on. If there is a better patch for this motherboard please let me know.

 

Thanks a lot.

 

Greetings from Mexico City. :D

Link to comment
Share on other sites
beebox50
beebox50
Posted
Posted

sony vaio sound VGN-SZ73B work perfectry!

with uphuck 10.4.9 / ALC882 AppleHDA / Patcher_v1.16

 

thanx taruga

 

and some solution here http://ja.pastebin.ca/ find many codec dump

 

 

Codec: SigmaTel STAC9872AK
Address: 0
Vendor Id: 0x83847662
Subsystem Id: 0x104d0700
Revision Id: 0x100201
Default PCM: rates 0x7e0, bits 0xe, types 0x1
Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x59 0x59]
 Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0xff 0xff]
 Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0xff 0xff]
 Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x59 0x59]
 Power: 0x0
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
 Power: 0x0
 Connection: 1
    0x07
Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In
 Amp-In caps: N/A
 Amp-In vals:  [0x00 0x00]
 Connection: 1
    0x0e
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
 Power: 0x0
 Connection: 1
    0x09
Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In
 Amp-In caps: N/A
 Amp-In vals:  [0x80 0x80]
 Connection: 1
    0x15
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x08173c: IN OUT HP Detect
 Pin Default 0x03211030: [Jack] HP Out at Ext Left
   Conn = 1/8, Color = Black
 Pin-ctls: 0xc0: OUT HP
 Connection: 1
    0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x0814: OUT Detect
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
   Conn = 1/8, Color = Black
 Pin-ctls: 0x00:
 Connection: 1
    0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x0814: OUT Detect
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
   Conn = 1/8, Color = Black
 Pin-ctls: 0x00:
 Connection: 1
    0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x08173c: IN OUT HP Detect
 Pin Default 0x03a15030: [Jack] Mic at Ext Left
   Conn = 1/8, Color = Red
 Pin-ctls: 0x24: IN
 Connection: 1
    0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
 Pincap 0x0824: IN Detect
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
   Conn = 1/8, Color = Black
 Pin-ctls: 0x20: IN
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x0814: OUT Detect
 Pin Default 0x90170110: [Fixed] Speaker at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x05
Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital
 PCM: rates 0x3e0, bits 0xe, types 0x5
Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
   Conn = 1/8, Color = Black
 Pin-ctls: 0x00:
 Connection: 2
    0x10* 0x09
Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital
 PCM: rates 0x160, bits 0xe, types 0x5
 Connection: 1
    0x13
Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital
 Pincap 0x0834: IN OUT Detect
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
   Conn = 1/8, Color = Black
 Pin-ctls: 0x00:
 Connection: 1
    0x18
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x90a7013e: [Fixed] Mic at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x20: IN
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1
 Amp-Out vals:  [0x00 0x00]
 Connection: 4
    0x0a 0x0d 0x14* 0x02
Node 0x16 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
 Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
 Amp-Out vals:  [0x00]
Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono
Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital
1

Link to comment
Share on other sites
roccotocco
roccotocco
Posted
Posted

I

I have reinstalled osx jas 10.4.8 ex-novo

after, had tried alc262,2, zip and repaired permission, deleting kext cache and rebbot.

 

after rebooting the message error for the alcinject etc... but the audio work fine true only the internal speaker. no headphone sound.

 

the file script for permission disk make failur system and i does reset the notebook

Link to comment
Share on other sites
fandel
fandel
Posted
Posted

Sweet... I got my AD1986A sound to work on my Lenovo 3000 N100 laptop. I used AppleHDAPatcher 1.13 and my own dump... The only thing is that I don't have volume control and I think there is a fix for this already I'll try to read around here a bit more but if anyone has a solution please let me know.

 

For those interested this is my dump:

Codec: Analog Devices AD1986A
Address: 0
Vendor Id: 0x11d41986
Subsystem Id: 0x17aa2066
Revision Id: 0x100500
Default PCM:
   rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
   bits [0xe]: 16 20 24
   formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
 PCM:
   rates [0x60]: 44100 48000
   bits [0x2]: 16
   formats [0x5]: PCM AC3
 Connection: 2
    0x01* 0x06
Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x19 0x19]
 Power: 0x0
Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Power: 0x0
Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Power: 0x0
Node 0x06 [Audio Input] wcaps 0x100511: Stereo
 PCM:
   rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
   bits [0x6]: 16 20
   formats [0x1]: PCM
 Power: 0x0
 Connection: 1
    0x12
Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 8
    0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x08 [Audio Mixer] wcaps 0x200100: Mono
 Connection: 1
    0x07
Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80] [0x80]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80]
 Connection: 2
    0x04 0x05
Node 0x0a [Audio Selector] wcaps 0x300101: Stereo
 Connection: 3
    0x07* 0x04 0x05
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
 Connection: 2
    0x07* 0x04
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
 Connection: 2
    0x04* 0x07
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
 Connection: 2
    0x05* 0x08
Node 0x0e [Audio Selector] wcaps 0x300100: Mono
 Connection: 2
    0x08* 0x11
Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 8
    0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
 Connection: 3
    0x20* 0x1c 0x1f
Node 0x11 [Audio Selector] wcaps 0x300941: Stereo
 Connection: 2
    0x0f* 0x2b
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 8
    0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
    0x11
Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80]
 Connection: 1
    0x23
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
    0x22
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
    0x21
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
    0x10
Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
 Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
 Amp-Out vals:  [0x8f]
 Connection: 2
    0x19* 0x24
Node 0x19 [beep Generator Widget] wcaps 0x700000: Mono
Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x19 0x19]
 Pincap 0x081f: OUT HP Detect
 Pin Default 0x02214021: [Jack] HP Out at Ext Front
   Conn = 1/8, Color = Green
 Pin-ctls: 0xc0: OUT HP
 Connection: 1
    0x0a
Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x19 0x19]
 Pincap 0x081001f: OUT HP EAPD Detect
 Pin Default 0x81114011: [Fixed] Speaker at Ext Rear
   Conn = 1/8, Color = Green
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x0b
Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x0837: IN OUT Detect
 Pin Default 0x41013012: [N/A] Line Out at Ext Rear
   Conn = 1/8, Color = Blue
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x0c
Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x41019015: [N/A] Line Out at Ext Rear
   Conn = 1/8, Color = Pink
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x0d
Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80]
 Pincap 0x0810: OUT
 Pin Default 0x501700f0: [N/A] Speaker at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x0e
Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
 Pincap 0x081727: IN Detect
 Pin Default 0xc2a190f0: [both] Mic at Ext Front
   Conn = 1/8, Color = Pink
 Pin-ctls: 0x24: IN
Node 0x20 [Pin Complex] wcaps 0x400081: Stereo
 Pincap 0x081727: IN Detect
 Pin Default 0x418130f0: [N/A] Line In at Ext Rear
   Conn = 1/8, Color = Blue
 Pin-ctls: 0x20: IN
Node 0x21 [Pin Complex] wcaps 0x400081: Stereo
 Pincap 0x0827: IN Detect
 Pin Default 0x509700f0: [N/A] Aux at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x20: IN
Node 0x22 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x903300f0: [Fixed] CD at Int N/A
   Conn = ATAPI, Color = Unknown
 Pin-ctls: 0x20: IN
Node 0x23 [Pin Complex] wcaps 0x400000: Mono
 Pincap 0x0820: IN
 Pin Default 0x90b70130: [Fixed] Telephony at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x20: IN
Node 0x24 [Pin Complex] wcaps 0x400000: Mono
 Pincap 0x0820: IN
 Pin Default 0x90f701f0: [Fixed] Other at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x20: IN
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x014511f0: [Jack] SPDIF Out at Ext Rear
   Conn = Optical, Color = Black
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x02
Node 0x26 [Power Widget] wcaps 0x500500: Mono
 Power: 0x0
 Connection: 8
    0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 2
    0x1f 0x1d
Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 2
    0x1f 0x20
Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 2
    0x1d 0x20
Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo
 Connection: 3
    0x1f 0x1d 0x20
Node 0x2b [Audio Mixer] wcaps 0x200100: Mono
 Connection: 1
    0x0f

Link to comment
Share on other sites
PabloPCX
PabloPCX
Posted
Posted

AppleHDA Patcher - 2006/2007 Taruga v1.16

_______________________________________________________

Codec : Conexant CX20551 (Waikiki)

Vendor Id : 0x14f15047

Subsystem Id : 0x103c30b2

_______________________________________________________

 

* Detected unsupported Conexant Codec

 

Codec: Conexant CX20551 (Waikiki)
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x103c30b2
Revision Id: 0x100000
Default PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
 Amp-Out vals:  [0x18 0x18]
 PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
 Power: 0x0
Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
 PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
 Power: 0x0
Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
 Amp-In vals:  [0x83 0x83] [0x8a 0x8a] [0x8a 0x8a] [0x0c 0x0c] [0x83 0x83] [0x0a 0x0a]
 PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
 Power: 0x0
 Connection: 6
 0x19 0x14 0x15 0x1a* 0x16 0x10
Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
 Amp-Out vals:  [0x18 0x18]
 Pincap 0x081001c: OUT HP EAPD Detect
 Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
 Pin-ctls: 0x40: OUT
 Power: 0x0
 Connection: 3
 0x19* 0x10 0x16
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
 Amp-Out vals:  [0x1e 0x1e]
 Pincap 0x0833c: IN OUT HP Detect
 Pin Default 0x02a1102e: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
 Pin-ctls: 0x20: IN
 Power: 0x0
 Connection: 2
 0x19* 0x16
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
 Amp-Out vals:  [0x1e 0x1e]
 Pincap 0x0833c: IN OUT HP Detect
 Pin Default 0x40000180: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
 Pin-ctls: 0x21: IN
 Power: 0x0
 Connection: 3
 0x1c* 0x19 0x16
Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
 Pincap 0x0860: IN
 Pin Default 0x94330121: [Fixed] CD at Int Right
Conn = ATAPI, Color = Unknown
 Pin-ctls: 0x20: IN
 Power: 0x0
Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
 Pincap 0x08324: IN Detect
 Pin Default 0x95a70122: [Fixed] Mic at Int Top
Conn = Analog, Color = Unknown
 Pin-ctls: 0x21: IN
 Power: 0x0
Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x04440131: [Jack] SPDIF Out at Ext Right
Conn = RCA, Color = Unknown
 Pin-ctls: 0x40: OUT
 Power: 0x0
 Connection: 1
 0x11
Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
 Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
 Amp-In vals:  [0x17 0x17] [0x9a 0x9a] [0x91 0x91] [0x13 0x13]
 Power: 0x0
 Connection: 4
 0x10 0x1b 0x1a 0x16
Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
 Amp-Out vals:  [0x03 0x03]
 Power: 0x0
 Connection: 3
 0x15 0x14 0x17*
Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
 Power: 0x0
 Connection: 2
 0x14* 0x15
Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
 Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
 Amp-Out vals:  [0x1a 0x1a]
 PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
 Power: 0x0
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
 Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
 Amp-Out vals:  [0x18 0x18]
 Pincap 0x08314: OUT Detect
 Pin Default 0x92170110: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
 Pin-ctls: 0x40: OUT
 Power: 0x0
 Connection: 3
 0x1c* 0x19 0x16
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono

 

Aid please <_<

Sorry I do not speak English, Single Spanish

Link to comment
Share on other sites
Taruga
Taruga
Posted
  • Author
Posted

Thanks to vipersporthp for his fast testing, after 2 attempts inputs are working for stac9227 0x83847618, both mic and line in.

I thought they were working but vipersporthp said it wasn´t. So here´s the fix.

 

FN: stac9227_83847618.zip available at post #1 .

Sorry, but only today was possible to put it online, cause insanely mac was giving error when trying to add the file.

 

Enjoy

Link to comment
Share on other sites
swindlerborealis
swindlerborealis
Posted
Posted

Recently I exploded my mac installation and reinstalled 10.4.8 rather than 10.4.10. I retried your alc262 tests and I seem to be getting output through the internal speakers until I try to switch to headphones using hallab or system profiler, I get nothing through the headphones then and if I switch it back to speakers it won't play until I restart the system. it seems like the solution is really close!

Link to comment
Share on other sites
Taruga
Taruga
Posted
  • Author
Posted
Recently I exploded my mac installation and reinstalled 10.4.8 rather than 10.4.10. I retried your alc262 tests and I seem to be getting output through the internal speakers until I try to switch to headphones using hallab or system profiler, I get nothing through the headphones then and if I switch it back to speakers it won't play until I restart the system. it seems like the solution is really close!

 

In what hardware did that happen ?

Link to comment
Share on other sites
Taruga
Taruga
Posted
  • Author
Posted
Taruga, can i help testing out ALC262? how can i help you helping us?

 

There are some kext´s for alc262 at post #1, did you test them ? Had no success ?

 

ps - You´re the one with a Sony and mutted sound, right ?

Link to comment
Share on other sites
Unique13
Unique13
Posted
Posted

After I saw all you peeps having luck trying older patchers I thought I would give some a try... So far I have had the same results using the 1.13 and 1.16 patchers. But if I try the 1.10 I actually get a input line in and a Internal Microphone. On output I get a Digital output (when clicked on my headphone jack has a red light that shines out of it) and for some reason I show 2 Line out outputs. Still no sound from my built in speakers and nothing from my headphones jack. ;)

post-127001-1189558611_thumb.jpg

post-127001-1189558623_thumb.jpg

post-127001-1189558631_thumb.jpg

Link to comment
Share on other sites
Taruga
Taruga
Posted
  • Author
Posted
yes! thats me! i tried the three of them, but none of them gets oudio out. only in two have working mic. see my post on page 113 i think it is. i even sent you both of ioregs so you can take a look at them.

 

just let me know how i can help.

 

Well atm you can´t ;) I´m trying to fix it but it´s a hard issue.

Link to comment
Share on other sites
graphic Design
graphic Design
Posted
Posted

Okie, I have mainboard Gigabyte GA-8IK1100 (875P - ICH5R) and the soundcard onboard: Realtek AC'97 ALC658 (5.1). After installed Jas 10.4.8 DVD + Jas 10.4.9 Combo Update + 10.4.10 Update, I got the sound works, no need to edit any kext!

 

But I have only 2.0 stereo work only! I try to set it up to 5.1 in Audio MIDI Setup but no luck also! I still hear only sound on left and right speakers! I used VLC player as well but the results is the same!

 

Do U know any solutions for my case?

Edit some values in Audio kext? or any patches?

 

Please give me some ideas

 

Thanks in advance!

Link to comment
Share on other sites
adrianboom
adrianboom
Posted
Posted

hello,

i have a sigmatel HD audio device integrated on an INTEL 945g (w3609 emachines). i was wondering if there was a package of some sort that i could use to make audio work. i used viarhine for ethernet and now i only need to fix audio. before i reinstalled i used this package(attached) and it worked :). but now it wont:(. can somebody please help.

AppleHDA.kext.zip

Link to comment
Share on other sites
Taruga
Taruga
Posted
  • Author
Posted
hello,

i have a sigmatel HD audio device integrated on an INTEL 945g (w3609 emachines). i was wondering if there was a package of some sort that i could use to make audio work. i used viarhine for ethernet and now i only need to fix audio. before i reinstalled i used this package(attached) and it worked :). but now it wont:(. can somebody please help.

 

Is your codec sigmatel 9220 ?! or other ?

 

look at post #1 , there's a repository of codec dumps, download the one you have

Then download applehda patcher v1.16

Then drag the codec dump .txt into the AppleHDA Patcher 'Turtle' icon.

Link to comment
Share on other sites
Taruga
Taruga
Posted
  • Author
Posted
im not sure of my codec all i know is that it is sigmatel HD and ive already tried some of those patches but none of them worked

 

 

Well, if you don´t know what your codec is ... then it wont work !!!!

 

Look at the manual, look at the board manufacturer, open your pc an look at the sound codec ref, etc

 

Do something !!!! :)

Link to comment
Share on other sites
graphic Design
graphic Design
Posted
Posted
Okie, I have mainboard Gigabyte GA-8IK1100 (875P - ICH5R) and the soundcard onboard: Realtek AC'97 ALC658 (5.1). After installed Jas 10.4.8 DVD + Jas 10.4.9 Combo Update + 10.4.10 Update, I got the sound works, no need to edit any kext!

 

But I have only 2.0 stereo work only! I try to set it up to 5.1 in Audio MIDI Setup but no luck also! I still hear only sound on left and right speakers! I used VLC player as well but the results is the same!

 

Do U know any solutions for my case?

Edit some values in Audio kext? or any patches?

 

Please give me some ideas

 

Thanks in advance!

 

Taruga, Could U please help? :)

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...