KAIRES Posted July 13, 2007 Share Posted July 13, 2007 Taruga!!! I don't know how to do. I have mobo D946GZIS and can't work without sound. You can help-me, please whit my driver? My sound is Sigmatel 9227. Someone try whit HD card in mobo??KAIRES, vc eh Brasileiro? Yes, man!! Link to comment Share on other sites More sharing options...
schifino Posted July 13, 2007 Share Posted July 13, 2007 Vc teria como me ajudar com o som da minha placa mãe??? Link to comment Share on other sites More sharing options...
mahzor Posted July 14, 2007 Share Posted July 14, 2007 I downloaded the dump that I need from the site mentioned in the OP and OSX won't let me drag the file into the HDApatcher. Do I need to rename the file or what? Link to comment Share on other sites More sharing options...
Siro Posted July 14, 2007 Share Posted July 14, 2007 The support is still not there at least for mac os x 10.4.8 with sigmatel 9227 as I am also facing the same issues as many others in here.Best is to wait for Taruga to come up with a solution in the coming weeks or months I suppose till then tada Link to comment Share on other sites More sharing options...
G4case Posted July 14, 2007 Share Posted July 14, 2007 Ah Taruga! Happy to hear that you are still alive. Even more happy to hear you are working on a sound related project! I -and a lot of others for sure -had already given up any hope to get CONEXANT 5045 / 47 sound working fully. I tried it myself but got lost.... keep up your graet work! Link to comment Share on other sites More sharing options...
King.Spades Posted July 15, 2007 Share Posted July 15, 2007 Hey, how do I know what ALCXXX is my sound card? All I see is Realtek High Definition Audio. T_T Link to comment Share on other sites More sharing options...
dall Posted July 15, 2007 Share Posted July 15, 2007 acl883 don't work paching ok, rebooted, no sound devices detected. mac os x 10.4.10 AppleHDA Patcher - 2006/2007 Taruga v1.16 * Patching AppleHDA.kext to 0x10ec0883 Done * Checking AppleHDA for patch Done 0001f4a0 cmpl $0x10ec0883,%eax 00020584 cmpl $0x10ec0883,%eax * Checking for SPDIF Out Detected * Checking for SPDIF In Detected * Creating AppleHDA configs * Using the following nodes in pathmap Back Mic: 9 34 24 Line In : 8 35 26 Speaker : 20 12 2 Headphone: 27 38 37 Spdif In : 10 31 Spdif Out: 30 6 * Copying new config to destination Done * Repairing Permissions Started verify/repair permissions on disk disk0s1 mac Determining correct file permissions. The privileges have been verified or repaired on the selected volume Verify/repair finished permissions on disk disk0s1 mac * Deleting Extensions Cache Done ** Done patching - You can reboot now ** Link to comment Share on other sites More sharing options...
ticklemonster Posted July 15, 2007 Share Posted July 15, 2007 hey taruga is there a way to work with headphones and disable built in speakers Can you shut them off completely for your whole system??? Link to comment Share on other sites More sharing options...
ws2000 Posted July 16, 2007 Share Posted July 16, 2007 I have a Dell E520 with onboard 9227 and I just ran AppleHDA Patcher v1.16. I'm happy to report I now have sound. Thank you !!!! Sorry, it will take a lot of time for that. I´m working on a better and more compatible solution for all codecs Sigmatel 9227 users, look at post #1 Link to comment Share on other sites More sharing options...
KAIRES Posted July 16, 2007 Share Posted July 16, 2007 Faça na consola (isto com o patch aplicado) ioreg -lw0 > meuioregdump.txt e me mande o resultado para taruga@netcabo.pt Sigmatel 9227 mydump.txt Link to comment Share on other sites More sharing options...
yeuthem Posted July 17, 2007 Share Posted July 17, 2007 Any solution to ACL262 headphone problem... !!! Please help anybody Link to comment Share on other sites More sharing options...
tanoeng Posted July 17, 2007 Share Posted July 17, 2007 Could not get the audio file to work. System crashes when using any of the AppleHDA patches. Attached is a dump of my system. Gateway MX6960 JaS 10.4.8 SSE2 SSE3 installed with 10.4.9 upgrade. Intel Core 2 Duo T5600 1.84Ghz Sigmatel Audio 9250 Intel GMA950 Yukon Marvell Fast Ethernet (working) Intel PROset 3945abg (not working) mydump.txt Link to comment Share on other sites More sharing options...
Taruga Posted July 17, 2007 Author Share Posted July 17, 2007 Could not get the audio file to work. System crashes when using any of the AppleHDA patches. Attached is a dump of my system. Gateway MX6960 JaS 10.4.8 SSE2 SSE3 installed with 10.4.9 upgrade. Intel Core 2 Duo T5600 1.84Ghz Sigmatel Audio 9250 Intel GMA950 Yukon Marvell Fast Ethernet (working) Intel PROset 3945abg (not working) Replace your mach_kernel with a better one Link to comment Share on other sites More sharing options...
SamuelDB Posted July 18, 2007 Share Posted July 18, 2007 Hi Taruga, What about alc882m chipset on the asus n4l-vm ? Actually, when I aply the patch, everything appears in sound prefs, but there is no sound. Thanks Link to comment Share on other sites More sharing options...
tanoeng Posted July 18, 2007 Share Posted July 18, 2007 Taruga, downloaded a Kernel from IRC, applied patch and it worked. I now have audio. Thanks. Link to comment Share on other sites More sharing options...
gmichels Posted July 19, 2007 Share Posted July 19, 2007 Well, I actually have sound working out of the box (uphuck's 10.4.9 v1.3) on my Asus Z71V (ALC880). However I only get sound on the laptop speakers; no mic (built-in or jack), no line-in, no sound on headphone jack, etc. So I booted up linux, dumped the soundcard codec but AppleHDAPatcher v1.16 says the codec needs more research. I've attached the dump. Is there anything I can do? I care mainly for the headphone and mic jacks (if possible the built-in mic too). Thanks! alc880_z71v.txt Link to comment Share on other sites More sharing options...
ticklemonster Posted July 19, 2007 Share Posted July 19, 2007 headphones problem anyone pleaaaaaaaaaaaaaaaaaassssssseeeeeeeeeee Link to comment Share on other sites More sharing options...
bucckevin Posted July 19, 2007 Share Posted July 19, 2007 First of all, thanks for this wonderful patch. I have sound working with my ALC882. I have this one little problem though. On my shuttle xpc, I have sound jacks on the front and back. In the sound settings, internal speakers goes to the back port and headphone goes to the front. Is there a way to combine them to internal speakers? It's a little annoying to keep switching them when I want to plug my headphones to the front. I have another shuttle xpc but it has AC97 and it doesn't have this problem. Link to comment Share on other sites More sharing options...
woodoodm Posted July 19, 2007 Share Posted July 19, 2007 One more vote 4 ad1988b support... Only 2 audio channels work !!! help !!! Pleeeeeeeeeeaaaaaaaaaaasssssssseeeeeeee !!! Link to comment Share on other sites More sharing options...
sroddy Posted July 20, 2007 Share Posted July 20, 2007 Hey Taruga, first thank you very much for your hard effort. I've seen that my codec (ALC268) is still unsupported by the patcher, so i've decided to go on and try to patch it myself following your guide. I followed all the steps using a codec dump done with a linux live distro binhexing, changing the nodes. My situation is the following now: under apple system profiler I can see output/headphone/mic but i cant see them in my sytem preferences! do you know what i could be missing? Thank you again here is my codec dump if you should care codecdump.txt Link to comment Share on other sites More sharing options...
PETRANATOR Posted July 20, 2007 Share Posted July 20, 2007 Taruga, (or others) I know you're a busy guy - we appeciate all the hard work. I have a D945GNTL board, specs on Intel's site says it's a 9220 (Sigmatel), however when I get the dump out of Ubuntu, it shows as a 9221 A. When using the dump with the patcher, I get an audio icon in the menu bar, but no ouput on any port. Any help or comments from others with similar hardware is appreciated! Nate (Running 10.4.9, using patcher 1.6) Link to comment Share on other sites More sharing options...
Lyw Posted July 20, 2007 Share Posted July 20, 2007 Can anyone can help me on my sound driver? My Notebook is Dell Latitude D630, should be Sigmatel 9205. Thanks in advance Link to comment Share on other sites More sharing options...
marliwahoo Posted July 20, 2007 Share Posted July 20, 2007 Will there be a new patcher (1.17) for 10.4.10 ? After Apple's "audio update" I needed to re-patch ..... 9220 audio worked fine after but software update says I need "audio update" again. Link to comment Share on other sites More sharing options...
spikes-5 Posted July 21, 2007 Share Posted July 21, 2007 Hello Just got a Intel D945Gccr mobo. I tryed the ALC883 patch and the os crashes at start up I'm running 10.4.3. If anyone could help it would be great. Thanks James Link to comment Share on other sites More sharing options...
TrullyJT Posted July 22, 2007 Share Posted July 22, 2007 HI Taruga! =) I'm another one with ADI1986a on i945P (osx 10.4.8. with 8.8.1 kernel) Patcher configures only line-out and SPDIF-out but they dont work at all (volume slider is at MAX but there's no sound and no control) Azalia works well but gives only 2ch-output Hope you're on your way to this card solution. Maybe my dump will help a bit. adi.txt Link to comment Share on other sites More sharing options...
Recommended Posts