Jump to content

AppleHDA Solution - Work in progress

Taruga

By Taruga,
in AppleHDA

 Share
4,108 posts in this topic

Recommended Posts

x51v
x51v
Posted
Posted (edited)

I used AppleHDA Patcher - Taruga v1.15, v1.14, 1.13, conexant_hda5047.txt, but it doesn't work, message shows:

_______________________________________________________

Codec : Generic 14f1 ID 5047

Vendor Id : 0x14f15047

Subsystem Id : 0x103c30b2

_______________________________________________________

 

* Detected unsupported Generic Codec

Exiting...

 

My audio card Spec is HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30A0&REV_1000\4&2DDC00D9&0&0001

 

Thank you for you hard work.

Edited by x51v
Link to comment
Share on other sites
Dr.Q
Dr.Q
Posted
Posted

After using AppleHDAPatcher v1.15 on my JaS 10.4.8 i don't get any sound, not from the build in speakers nor the jack output. The system profiler tells me that there is "No Built-in Audio". However according to System Preferences>Sound I have 2 output devices. Namely Line Out (on Port Built-in Line Output) and Digital Out (on Port Built-in Digital Output), but I don't have any volume control. Can someone help me figure out what's going wrong?

 

My system: Asus V6J (laptop)

OSX = JaS 10.4.7 -> updated with eGWan combo update patch

Sound = Analog Devices 1986 (Vendor id: 11D4, Device id: 1986)

 

Linux Codec Dump I tried, I made the last one myself using a Ubuntu 6.06 LTS install CD:

- AD1986a.txt

- AD1986.txt

Link to comment
Share on other sites
r5a
r5a
Posted
Posted
I used AppleHDA Patcher - Taruga v1.15, v1.14, 1.13, conexant_hda5047.txt, but it doesn't work, message shows:

_______________________________________________________

Codec : Generic 14f1 ID 5047

Vendor Id : 0x14f15047

Subsystem Id : 0x103c30b2

_______________________________________________________

 

* Detected unsupported Generic Codec

Exiting...

 

My audio card Spec is HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30A0&REV_1000\4&2DDC00D9&0&0001

 

Thank you for you hard work.

Same problem as yours, here's my codec#0 file.

codec_0.zip

Link to comment
Share on other sites
aberracus
aberracus
Posted
Posted (edited)

Taruga Plis Help ME!

 

i have the codec dump for my card the GREEN OUTPUT connector is not working ok (it sounds too low and hushy), in windows using realtek HD software i rearrenge the outputs so the Blue Line in is now Line out, and the sound is perfect (in windows). i am attaching the codec dump, cause i think if i modify it changing the blue for green ports your patcher would also assign the blue as out... But i dont know what to change, please help me! (its not the computer in my signature BTW)

 

Força Portugal!

 

attch codec dump

 

Codec: Realtek ALC883

Address: 2

Vendor Id: 0x10ec0883

Subsystem Id: 0x1458c603

Revision Id: 0x100002

Default PCM: rates 0x560, bits 0x0e, types 0x1

Default Amp-In caps: N/A

Default Amp-Out caps: N/A

Node 0x02 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x03 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x04 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x05 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital

PCM: rates 0x560, bits 0x1e, types 0x1

Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In

Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x00 0x00]

PCM: rates 0x160, bits 0x06, types 0x1

Connection: 1

0x23

Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In

Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x00 0x00]

PCM: rates 0x160, bits 0x06, types 0x1

Connection: 1

0x22

Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital

PCM: rates 0x560, bits 0x1e, types 0x1

Connection: 1

0x1f

Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x19 0x19] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Connection: 10

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17

Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x19 0x19]

Connection: 2

0x02 0x0b

Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x03 0x0b

Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x04 0x0b

Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x05 0x0b

Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x083e: IN OUT HP Detect

Pin Default 0x01014410: [Jack] Line Out at Ext Rear

Conn = 1/8, Color = Green

Pin-ctls: 0x40: OUT

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x083e: IN OUT HP Detect

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x20: IN

Connection: 5

0x0c 0x0d* 0x0e 0x0f 0x26

Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x083e: IN OUT HP Detect

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x20: IN

Connection: 5

0x0c 0x0d 0x0e* 0x0f 0x26

Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x083e: IN OUT HP Detect

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x20: IN

Connection: 5

0x0c 0x0d 0x0e 0x0f* 0x26

Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08173e: IN OUT HP Detect

Pin Default 0x01a19c40: [Jack] Mic at Ext Rear

Conn = 1/8, Color = Pink

Pin-ctls: 0x24: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08173e: IN OUT HP Detect

Pin Default 0x02a19c50: [Jack] Mic at Ext Front

Conn = 1/8, Color = Pink

Pin-ctls: 0x24å IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08173e: IN OUT HP Detect

Pin Default 0x01813c41: [Jack] Line In at Ext Rear

Conn = 1/8, Color = Blue

Pin-ctls: 0x20: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x08173e: IN OUT HP Detect

Pin Default 0x02214c20: [Jack] HP Out at Ext Front

Conn = 1/8, Color = Green

Pin-ctls: 0xc0: OUT HP

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1c [Pin Complex] wcaps 0x400001: Stereo

Pincap 0x0820: IN

Pin Default 0x9933014f: [Fixed] CD at Int ATAPI

Conn = ATAPI, Color = Unknown

Pin-ctls: 0x00:

Node 0x1d [Pin Complex] wcaps 0x400000: Mono

Pincap 0x0820: IN

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x00:

Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital

Pincap 0x0810: OUT

Pin Default 0x014b6130: [Jack] SPDIF Out at Ext Rear

Conn = Comb, Color = Orange

Pin-ctls: 0x00:

Connection: 1

0x06

Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital

Pincap 0x0820: IN

Pin Default 0x01cb7160: [Jack] SPDIF In at Ext Rear

Conn = Comb, Color = Yellow

Pin-ctls: 0x00:

Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono

Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Amp-Out caps: N/A

Amp-Out vals: [0x00 0x00]

Connection: 11

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Amp-Out caps: N/A

Amp-Out vals: [0x00 0x00]

Connection: 11

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x25 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x25 0x0b

Edited by aberracus
Link to comment
Share on other sites
K_o_G
K_o_G
Posted
Posted

Hi Taruga. i need support for the AD1988

downloaded a dump form this thread (it was the same vendor and subsytem id i figured out mine in widowz).i try patching with hda patcher 1.15 and get:

 

AppleHDA Patcher - 2006/2007 Taruga v1.15

_______________________________________________________

Codec : Analog Devices AD1988

Vendor Id : 0x11d41988

Subsystem Id : 0x104381e1

_______________________________________________________

 

 

* Detected unsupported Analog Codec

Exiting... :(

 

i thought the AD1988 is supported by the patcher?

 

any solution for me?

 

cu

K_o_G

Link to comment
Share on other sites
jjduro
jjduro
Posted
Posted

And don't forget ALC 861...

 

Older codecs like the ALC860 and 880 need a lot more work. We already know this, so dont whinge about it not working. It is being worked on

 

 

HDA is a lot of work in progress :(

Link to comment
Share on other sites
Knocks
Knocks
Posted
Posted

This patcher is hopelessly broken for the JaS 10.4.8 PPF1 (and PPF2) installation. My hackintosh crashes every time I drop the Sigmatel 9200 coder onto the patcher icon (and I've tried all patchers 1.10 through 1.15).

Link to comment
Share on other sites
PabloPCX
PabloPCX
Posted
Posted (edited)

Help me!!! :wacko:

 

 

AppleHDA Patcher - 2006/2007 Taruga v1.13

_______________________________________________________

Codec : Conexant ID 5047

Vendor Id : 0x14f15047

Subsystem Id : 0x1179ff31

_______________________________________________________

 

 

* Detected unsupported Conexant Codec

Exiting... :D

 

 

is Connexant HD :dev:

Edited by PabloPCX
Link to comment
Share on other sites
TECH_ATTACK
TECH_ATTACK
Posted
Posted
Hi Taruga. i need support for the AD1988

downloaded a dump form this thread (it was the same vendor and subsytem id i figured out mine in widowz).i try patching with hda patcher 1.15 and get:

 

AppleHDA Patcher - 2006/2007 Taruga v1.15

_______________________________________________________

Codec : Analog Devices AD1988

Vendor Id : 0x11d41988

Subsystem Id : 0x104381e1

_______________________________________________________

* Detected unsupported Analog Codec

Exiting... <_<

 

i thought the AD1988 is supported by the patcher?

 

any solution for me?

 

cu

K_o_G

 

 

Just use the Patcher V 1.13 then Linee-out andf Digital out (only Stereo) is working

Link to comment
Share on other sites
DaveGee
DaveGee
Posted
Posted (edited)
From one Dave to another, Dave, ;) and with great respect, your tutorial is very helpful and highly recommended for anyone who CAN GET SOUND IN LINUX. ... Cheers, Dave

 

Wow...

 

Yea I guess I didn't even think to take that into account... Maybe because I had just assumed that linux would have support for practically all of the permutations of Audio Codecs...

 

I further assumed that someone would understand/assume that if something didn't work in Linux.... an OS that provides drivers for just about EVERYTHING UNDER and over THE SUN ;) .... That OS X was CLEARLY not going to have support for it.

 

Lets face it... OS X (while a fantastic - and my primary OS) is NOT exactly known for having an enormous library of 3rd party drivers. :)

 

I dunno but with equal great respect, I really didn't think the assumptions I made were in any a huge leap... :)

 

Dave

Edited by DaveGee
Link to comment
Share on other sites
K_o_G
K_o_G
Posted
Posted (edited)
Just use the Patcher V 1.13 then Linee-out andf Digital out (only Stereo) is working

 

I testet it with every version 1.10 - 1.15

 

I get the error on every version (1.13 to)

Is there another way to get it work? (only 2 chanel output should be ok for me at the moment; full support would be nice)

Update: I get 2 Channel output working for my AD1988a by modifing Azalia.

I hope the hda patcher will work soon for AD1988 to get full support for my onboard audio.

 

For other AD1988a users: Modify Azalia.kext with Vendor 0x11d41988 and 0x284b8086

 

cu

K_o_G

Edited by K_o_G
Link to comment
Share on other sites
Mateus
Mateus
Posted
Posted
I used AppleHDA Patcher - Taruga v1.15, v1.14, 1.13, conexant_hda5047.txt, but it doesn't work, message shows:

_______________________________________________________

Codec : Generic 14f1 ID 5047

Vendor Id : 0x14f15047

Subsystem Id : 0x103c30b2

_______________________________________________________

 

* Detected unsupported Generic Codec

Exiting...

 

My audio card Spec is HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30A0&REV_1000\4&2DDC00D9&0&0001

 

Thank you for you hard work.

 

How do you get headset work?

Link to comment
Share on other sites
dong
dong
Posted
Posted (edited)

I have a SoundMax (11D41981, 17AA2025), which is different from the two 1981 codec#0 files listed on the taruga's link.

 

When boot with ubuntu, only lineout works, thus the codec#0 should not be a correct one.

 

Does anyone have a fully working codec#0 file for this card?

Edited by dong
Link to comment
Share on other sites
Mateus
Mateus
Posted
Posted (edited)
Search the forum, I used either AzaliaAudio.pkg or Conexant_HD_Audio.pkg.zip; it work fine(both headset work), but the mic doesn't work.

 

I try the both, but only speakers works... :whistle:

Edited by Mateus
Link to comment
Share on other sites
Giff
Giff
Posted
Posted

I have the same issue with the AD1988 codec mentioned above, will try 1.13.

 

Is there source for the patcher available?

 

I have done the Azalia patch and have output working, picked up a cheapie USB handset for Skype-ing. The handset was 10 bucks at NewEgg (look for Syba USB VoIP phone) and also has a mic and a line out jack. Worked with no issues, autodetected, etc. The line out support 5.1 channel sound or stereo headset. ITs detected in "About this Mac..." as a C-Media chipset; I know there are other units, including a very small USB adapter that use the same set. For those of you waiting for patches, this may work well for you as a solution in the meantime. The main reason I wanted to patch was to get line in support for Skype, and I got 5.1 ch sound in the bargain.

Link to comment
Share on other sites
casamac
casamac
Posted
Posted

I have my Sigmatel Stac9200 working with the patch v.10, but i can't modify the input volume (in skype it really sucks), and in a guitar software called Guitar Rig 2 i can get a valid input source.

 

Any idea about a solution?

 

Thanx

Link to comment
Share on other sites
New Life
New Life
Posted
Posted (edited)

what a great job you have done , Taruga

 

I want to share my experience with you guys

 

My laptop is dell inspiron 1300 manufactured in China, and set Chinese as default language in Mac OSX. All patcher versions doesnt work for me at the very first. Most of them just open a blank window and no message was shown at all. 1.08 and 1.09 seem almost work for me, cause some messages was output during usage, but took no effect actually of cuz.

After almost 3-4 hrs trial, noticed that Taruga had said he encounter some name space prob or so, I realize that I should change the language setting before I use those patchers.

Yup, as you may guess, patchers wont work in a Chinese environment while it is perfect in English env. Thanks to Taruga, my Sigmatel 9200 finally speaks out and mic works too I think

 

And, according to my codec0, my Sigmatel 9200 chip is different from all in http://psykopat.free.fr/apple/AppleHDA/,

here comes the codec dump. Also i upload this codec file in case someone may want to download. Note that subsys id is 102801c9, good luck.

 

Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801c9
Revision Id: 0x102201
Default PCM: rates 0x7e0, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1få nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
 Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
 Power: 0x0
 Connection: 1
    0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
 PCM: rates 0x160, bits 0x0e, types 0x5
 Connection: 1
    0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
 PCM: rates 0x1e0, bits 0x0e, types 0x5
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
 Connection: 3
    0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
 Pincap 0x0810024: IN EAPD Detect
 Pin Default 0x40f000f0: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x40f000f1: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Connection: 2
    0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 1
    0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x19 0x19]
 Connection: 1
    0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 5
    0x10* 0x0f 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x083f: IN OUT HP Detect
 Pin Default 0x0321101f: [Jack] HP Out at Ext Left
   Conn = 1/8, Color = Black
 Pin-ctls: 0xc0: OUT HP
 Connection: 1
    0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x083f: IN OUT HP Detect
 Pin Default 0x90170310: [Fixed] Speaker at Int N/A
   Conn = Analog, Color = Unknown
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x0837: IN OUT Detect
 Pin Default 0x40f000f2: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x20: IN
 Connection: 1
    0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x03a11020: [Jack] Mic at Ext Left
   Conn = 1/8, Color = Black
 Pin-ctls: 0x24: IN
 Connection: 1
    0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x00]
 Pincap 0x0810: OUT
 Pin Default 0x40f000f3: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Connection: 1
    0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x40f000f4: [N/A] Other at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
 Connection: 1
    0x07
Node 0x14 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
 Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
 Amp-Out vals:  [0x00]

code0.txt

Edited by New Life
Link to comment
Share on other sites
juanpepe
juanpepe
Posted
Posted (edited)

Hi, is anybody still at work? :hysterical:

 

Is taruga still trying to make it work? Because if not then this thread has lost its goal, because as it seems the one who knew how to solve it was taruga, but he didn't explain how it worked or how one could help so that the whole info is berried in his mind. I only hope that somebody did get a glimps in tarugas work and figgured it out so as to continue tarugas great work, or has some source code.

 

Anyway you all must thank taruga for hes great job at helping many of you guys. :)

 

And please, anyone having problems with the patch:

 

:hysterical: PLEASE READ THIS THREAD THROUGH :gun: because most of the answers lies on some previous posts.

 

Taruga did so much, you could at least take some time to read the thread! ;)

Edited by juanpepe
Link to comment
Share on other sites
Pablo Sotomayor
Pablo Sotomayor
Posted
Posted

AD1986a Solution

 

Via VT81XX HDA AD1986a

Hardware ID : 0x11d41986

uid device IS: 0x32881106

1) Make backup copies of AppleHDA.kext and AppleAC97xxxxx.kext:

 

On terminal, type:

 

cd /System/Library/Extensions

sudo mkdir audio_backup

sudo mv AppleHDA.kext audio_backup/

sudo mv AppleAC97Family.kext audio_backup/

 

 

2) Edit AppleAzaliaAudio.kext:

 

On terminal, type:

 

sudo vi AppleAzaliaAudio.kext/Contents/Info.plist

 

Search for "IOHDAudioCodecVendorID" pressing "/" on vi:

 

<key>IOHDAudioCodecVendorID</key>

<string>0x10ec0880</string>

 

Press "i" to edit:

 

<string>0x10ec0880</string> -- to -- <string>0xhardware id</string>

 

Exit: Press ESC and then press type ":wq" to save and exit vi.

 

On terminal, type:

 

sudo vi AppleAzaliaAudio.kext/Contents/PlugIns/AppleAzaliaController.kext/Contents/Info.plist

 

Search for "IOPCIPrimaryMatch" pressing "/" on vi:

 

<key>IOPCIPrimaryMatch</key>

<string>0xNNNN8086</string> (where NNNN are any 4 characters)

 

Press "i" to edit:

 

<string>0xNNNN8086</string> -- to -- <string>0xuid device </string>

 

(note: for Via ADI1986a, the string is probably correct without any edit)

 

 

Exit: Press ESC and then press type ":wq" to save and exit vi.

 

 

3) Repair file system permissions:

 

On terminal, type:

 

sudo diskutil repairpermissions /

sudo chown -R root:wheel AppleAzaliaAudio.kext

sudo chmod -R 755 AppleAzaliaAudio.kext

cd /System/Library

sudo rm -rf Extensions.mkext Extensions.kextcache

 

4) Then, reboot and enjoy 2CH audio.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...