andydenis Posted January 27, 2009 Share Posted January 27, 2009 Any one had any success with the on-board sound on Asus P5Q (Deluxe) motherboard. I can get Stereo sound but nothing else. Its 8 channel on-board sound I have had a search on the forums for this ALC 1989B (ADI AD2000B?) but no hits as yet. Any help is much appreciated. codec_dump.txt Link to comment Share on other sites More sharing options...
milOtis Posted January 30, 2009 Share Posted January 30, 2009 umm... i am SO lost. I am trying to get audio working on my Lenovo laptop (3000 N100), just installed the iDeneb 10.5.5, and all is fine except audio. I downloaded the 1.20 patcher....now what do I do? I am clueless as to what audio card I have. -Thanks for the help. Link to comment Share on other sites More sharing options...
Sam2x Posted January 30, 2009 Share Posted January 30, 2009 this is my dump file i have HP 6710B ADI1981HD i'm using AppleAzalia v3 i have sound in speaker but not line out or mic codec0_dump.txt Link to comment Share on other sites More sharing options...
kidalive Posted February 1, 2009 Share Posted February 1, 2009 How are u doing, dude? I heard ya ill, are yo getting any better? I got a ALC883 CAd 1 not working. And I`m not sure what to do now hope you can help when ya much better.\ HERE IS MY CARD INFO. THANKS IN ADVANCE, MAN. Link to comment Share on other sites More sharing options...
jjduro Posted February 2, 2009 Share Posted February 2, 2009 this is my dump file i have HP 6710B ADI1981HD i'm using AppleAzalia v3 i have sound in speaker but not line out or mic Ask for the driver at http://osxupdate.blogspot.com/ Link to comment Share on other sites More sharing options...
Mattr!x Posted February 2, 2009 Share Posted February 2, 2009 any help appreciated! i have Asus P5be-plus motherboard which i believe (says on web) that i have ad1988 chipset onboard audio under mac where can i check for 100% sure wat i have and if indeed it is ad1988 is there a kext? to install? i have tried all available version on the iPC dvd 10.5.6 to no avail ad1988/b/p5k i have read somewhere that someone had success with ideneb's version but can't find it anwhere to download.... or is this all impossible? btw i can get basic audio with azalia but would like (really need) inputs etc to work thankyou! Link to comment Share on other sites More sharing options...
mr.ProgMan Posted February 3, 2009 Share Posted February 3, 2009 Hello to everyone. Can enybody help me with sound drivers of Sound Max DA resides on ASUS K8V-X? Can't find them. Please, help. Link to comment Share on other sites More sharing options...
superjames2040 Posted February 6, 2009 Share Posted February 6, 2009 Hey Taruga, thanks for all the help you are great. I have a problem with my ALC262 driver, I made the Linux Codec Dump from Ubunto 8.10 LiveCD and used with your AppleHDA Patcher, and the output it`s working great but I have no Audio input working, the thing it´s that I´m testing Garageband 09, and it will be really sweet if I could use an input, I tried with an USB Audio card wich is an USB 3D SOUND Model PU552, and it kind of wors, but I would love to use my ALC262 input, is there any chance you can help me out? Or is there any guide I could follow to make it work? I attached the codec dump, thanks for all, keep on the great work, ciao. ALC262_Codec0_VGN_N220E.txt Link to comment Share on other sites More sharing options...
Guest BuildSmart Posted February 7, 2009 Share Posted February 7, 2009 There are reported claims that STAC92XX can be made to work with the 10.5.0/10.5.2 AppleHDA.kext but I have yet to see a working solution. I have 2 possible options, STAC9221D and STAC9274D, Does anyone really have one of these audio STAC's working using the Leopard AppleHDA.kext or is this just wishful thinking on their part? If it does work, can someone pm me a link for of the driver for the STAC9274D so I can do some testing please, thank you. Link to comment Share on other sites More sharing options...
angr2387 Posted February 10, 2009 Share Posted February 10, 2009 hello i have a dell xps 410 and i got the internet working now i spent the whole night trying to figure out how to get my sound working. I have a sigmatel high definition codec but no matter what i try it dosent work. im sort of STUCK ON HOW to dump a file. First i edit copy what ever is on this link http://forum.insanelymac.com/index.php?sho...mp;&do=findComment&comment=295155 ) and i have the apple hda patcher but i dont know how to make both them to work together, any help WILL BE APPRECIATED. thanks angel Link to comment Share on other sites More sharing options...
haufen Posted February 11, 2009 Share Posted February 11, 2009 hey guys.....can someone help me with a driver for the 0x1179FF00 audio device? thanks alot Link to comment Share on other sites More sharing options...
Dr. Hurt Posted February 11, 2009 Share Posted February 11, 2009 200 pages and over 1.5 million views!! This is a monster thread Anyway, any news on the new universal Audio driver Taruga was talking about?! Link to comment Share on other sites More sharing options...
japanstefmac Posted February 15, 2009 Share Posted February 15, 2009 EDIT: Tried the STAC9271D.txt with AppleHDAPAtcherv1.20 but when rebooting, froze at grey Apple screen. Rebooted, did -x and it started in Safe mode. Rebooted again, and it starts up but just without any sound. Anyone have the same issue? Previous: Looking for the STAC9271D kext. Thanks a ton in advance. Link to comment Share on other sites More sharing options...
geolegg Posted February 16, 2009 Share Posted February 16, 2009 Hi all, I've been digging around for hours now and it appears that there is no proper HDAEnabler for the ALC889a, that allows the system to use 5.1 and 7.1 surround sound. On another forum it was mentioned that most of the 889a mods are based on an 885 codec dump, rather than an 889a. Does anyone know where to get the correct kext's so that 5.1 and 7.1 audio aren't grayed out in audio midi setup? Link to comment Share on other sites More sharing options...
Hugo_bee Posted February 16, 2009 Share Posted February 16, 2009 hy taruga.. I'm asking you how to use my dump because the 1.20 release seems to be right when I launch it.. but after the reboot I see not all the item in the prefpane there are 3 output (2 analog and 1 digital) and 2 inut.. and .. I will be happy if those works.. but anyone works. No audio.. no input. this is an ALC888 S/T (somebody wrote that it is alc888/100) ..boh bye Link to comment Share on other sites More sharing options...
jjduro Posted February 16, 2009 Share Posted February 16, 2009 EDIT: Tried the STAC9271D.txt with AppleHDAPAtcherv1.20 but when rebooting, froze at grey Apple screen. Rebooted, did -x and it started in Safe mode. Rebooted again, and it starts up but just without any sound. Anyone have the same issue? Previous: Looking for the STAC9271D kext. Thanks a ton in advance. google for Taruga's Surrogate Sollutions and ask there 200 pages and over 1.5 million views!!This is a monster thread Anyway, any news on the new universal Audio driver Taruga was talking about?! Nope. Sorry. Still inside Taruga's head. Link to comment Share on other sites More sharing options...
kikko088 Posted February 16, 2009 Share Posted February 16, 2009 hi at all, excuse me for my english, can I have 5.1 with ALC 882 of a P5WD2? kikko088 Link to comment Share on other sites More sharing options...
lukeusuk Posted February 18, 2009 Share Posted February 18, 2009 if you need free parts head over to my and click on the website lukeusuk.hostrator.com/ and belpw the counter there is a link i use it al the time Link to comment Share on other sites More sharing options...
josemarvin Posted February 19, 2009 Share Posted February 19, 2009 hello i need try this Link to comment Share on other sites More sharing options...
fsiddique Posted February 21, 2009 Share Posted February 21, 2009 Can someone help me find a download of the STAC9228_0x083847616 file. I cant find it ANYWHERE, no link here and the link on macgirl's guide is broken. Please, I have spent hours looking for it without success. Link to comment Share on other sites More sharing options...
ShadowD Posted February 22, 2009 Share Posted February 22, 2009 Hi people. Sorry for my english (oh, those Russians) I have motherboard MSI 915GV with ALC 880 and iPC 10.5.6. Video work, but sound... I think that AppleHDAPatcher can help me, but how use him? I launch them, open a window with text "Pleas drag and drop bla bla bla etc". As i understand i have to use file *.txt content linux codec dump. I try to drag and drop this file into window, into icon on dock (may be funny but i really can`t understand) and happens - nothing. Simple copy\paste not work. Where i have to drag and drop txt file or what i do wrong? Link to comment Share on other sites More sharing options...
demigod Posted February 22, 2009 Share Posted February 22, 2009 Hi people. Sorry for my english (oh, those Russians) I have motherboard MSI 915GV with ALC 880 and iPC 10.5.6. Video work, but sound... I think that AppleHDAPatcher can help me, but how use him? I launch them, open a window with text "Pleas drag and drop bla bla bla etc". As i understand i have to use file *.txt content linux codec dump. I try to drag and drop this file into window, into icon on dock (may be funny but i really can`t understand) and happens - nothing. Simple copy\paste not work. Where i have to drag and drop txt file or what i do wrong? Download it Here and use KextHelper for installation. Voila you got LineIn and LineOut (its ALC880).But if you could have selected right AudioCodec while installation you would have got it.Next time while installation Try to Select right AudioCodec. Have Fun ALC880.zip Link to comment Share on other sites More sharing options...
hotburn Posted February 22, 2009 Share Posted February 22, 2009 Guys Hi I have relatek alc 888 8 channel audio onboard card and I m using 5.1 sound system. My problem is only 2 line out shows on the audio midi.So ı just use my sub. and media speaker.Others aint work.Please help me guys I wanna listen 5.1 music Sorry about my english if it s bad Link to comment Share on other sites More sharing options...
demigod Posted February 22, 2009 Share Posted February 22, 2009 Guys Hi I have relatek alc 888 8 channel audio onboard card and I m using 5.1 sound system. My problem is only 2 line out shows on the audio midi.So ı just use my sub. and media speaker.Others aint work.Please help me guys I wanna listen 5.1 music Sorry about my english if it s bad Download it.not sure about working.Give it a try ALC888_6Ports_Digital.pkg.zip Link to comment Share on other sites More sharing options...
GodOfSharing Posted February 22, 2009 Share Posted February 22, 2009 Greetings XLabs: You do great work! Multimedia: Audio Adapter Intel 82801EB ICH5 - AC'97 Audio Controller [A-2/A-3] Installed iDeneb 10.5.6 v1.4 Intel on Dell B110 Dimension. I am getting "No Built In Audio" in my System Profile. And No PCI installed, yet my Ethernet controller PCI card is working. I recently added a plug and play Firewire 400 "For Best Ports Connection" (Mac) and it registered fine. Multimedia: Audio Adapter Intel 82801EB ICH5 - AC'97 Audio Controller [A-2/A-3] Link to comment Share on other sites More sharing options...
Recommended Posts