Jump to content

Tracing back the AMD GPU wakeup issue to its origin

Mieze

By Mieze,
in ATi

 Share
368 posts in this topic

Recommended Posts

Pavo
Pavo
Posted
Posted

Do you have IGPU partially enabled? The macOS GPUFamily1 status is a rare achievement unless using Intel igpu in some way.

@Gigamaxx, this is completely wrong, GPUFamily1 is a feature set for Metal, has nothing to do with iGPU. https://developer.apple.com/documentation/metal/mtlfeatureset It probably because of the FB he is using or SMBIOS he is using.

Also, with the SSDT method, the System Profiler states " Metal: Supported, feature set macOS GPUFamily1 v3" but with RadeonDeInit method, it says " Metal: Supported"

Because when using RadeonDeInit method doesn't inject a framebuffer, which means it will use the default RadeonFramebuffer which doesn't have any feature sets allocated to it. when using injected framebuffer ie... InjectATI=True or SSDT method the framebuffer has a certain feature set allocated for it.

Link to comment
Share on other sites
Gigamaxx
Gigamaxx
Posted
Posted

@Gigamaxx, this is completely wrong, GPUFamily1 is a feature set for Metal, has nothing to do with iGPU. https://developer.apple.com/documentation/metal/mtlfeaturesetIt probably because of the FB he is using or SMBIOS he is using.

I have noticed with my pentium and Ryzen systems I always get the metal supported, but with my i5 6500 (metal supported igpu) I get the macOSGPUFamily1 status. I’ve never seen this status without IGPU metal active.

Link to comment
Share on other sites
Pavo
Pavo
Posted
Posted

I have noticed with my pentium and Ryzen systems I always get the metal supported, but with my i5 6500 (metal supported igpu) I get the macOSGPUFamily1 status. I’ve never seen this status without IGPU metal active.

Because there is a feature set that is allocated for the ig-platform-id you are using for your i5 6500 iGPU

  • Like 1
Link to comment
Share on other sites
Gigamaxx
Gigamaxx
Posted
Posted

Because there is a feature set that is allocated for the ig-platform-id you are using for your i5 6500 iGPU

Exactly, it seems to assign the Radeon Framebuffer automatically to the family status. I’m not trying to be skeptical just curious I would like to be able to get this level on my non supported CPUs. I’ve also noticed using the deinitiate or whatevergreen it never gets family1.

Link to comment
Share on other sites
Pavo
Pavo
Posted
Posted

Exactly, it seems to assign the Radeon Framebuffer automatically to the family status. I’m not trying to be skeptical just curious I would like to be able to get this level on my non supported CPUs. I’ve also noticed using the deinitiate or whatevergreen it never gets family1.

Again because RadeonDeInit and Whatevergreen do not inject a framebuffer

Link to comment
Share on other sites
MacNB
MacNB
Posted
Posted

Do you have IGPU partially enabled? The macOS GPUFamily1 status is a rare achievement unless using Intel igpu in some way.

 

Nope IGPU is completely disabled. "Metal: Supported, feature set macOS GPUFamily1 v3" has nothing to do with IGPU.

See this tech doc from Apple. 

Link to comment
Share on other sites
maclocus
maclocus
Posted
Posted

Is there anyone with an rx560 that is having no issues? No crashes / artifacts, dual screen working.

 

I have a RX560 and the only issue I have is no sleep but that could also be macos 10.13.2 beta. I once had a working sleep but no more.

The issue is display goes into standby but fans keep working, the system is unreachable and can only be revived by restart. This is with latest Clover and RadeonDeInit = true. It uses the default Radeonframebuffer.

 

If I use Acre framebuffer I boot into black display and can login remote, IORegistryExplorer shows Acre framebuffer being used but no display connected to any of the three connectors, patched or not.

 

I can live with it not having sleep, because from system off to Desktop takes some 10 seconds and I use less energy if shutdown  :) = less warming the earth, so I do everyone a favor.

 

But it keeps nagging for a solution if I am being honest  :D

Link to comment
Share on other sites
Denicio
Denicio
Posted
Posted

Can someone explain to me why when I use GFX0 instead of PEGP the SSDT doesn't work but only works when using PEGP.

I only learned that recently as well, in my case I would have to first apply the renaming patch from PEGP -> GFX0, and then utilize the patch with GFX0 naming.

  • Like 1
Link to comment
Share on other sites
xtddd
xtddd
Posted
Posted

I only learned that recently as well, in my case I would have to first apply the renaming patch from PEGP -> GFX0, and then utilize the patch with GFX0 naming.

hi,,i now only use redonindet=true in config.plist

Link to comment
Share on other sites
Mieze
Mieze
Posted
  • Author
Posted

Can someone explain to me why when I use GFX0 instead of PEGP the SSDT doesn't work but only works when using PEGP.

Check your Clover patches. There is probably one among them which renames GFX0 to IGPU and it gets applied to your SSDT too.

 

Mieze

  • Like 2
Link to comment
Share on other sites
MacWannaBe
MacWannaBe
Posted
Posted

Check your Clover patches. There is probably one among them which renames GFX0 to IGPU and it gets applied to your SSDT too.

 

Mieze

 

 

I have a single goal right now.... to not use Clover DeInit and do it with a SSDT so that after that works I can inject FrameBuffer and specifics of my RX560. (iMac18,3 with i7-7700K). So... In my config.plist I have:

	<key>Graphics</key>
	<dict>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<true/>
			<key>Intel</key>
			<true/>
		</dict>
		<key>ig-platform-id</key>
		<string>0x59120003</string>
	</dict>

And in Patches:

				<dict>
					<key>Comment</key>
					<string>Intel GPU PM. Rename GFX0 to IGPU</string>
					<key>Disabled</key>
					<false/>
					<key>Find</key>
					<data>R0ZYMA==</data>
					<key>Replace</key>
					<data>SUdQVQ==</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>Rename PEGP to GFX0</string>
					<key>Find</key>
					<data>
					UEVHUA==
					</data>
					<key>Replace</key>
					<data>
					R0ZYMA==
					</data>
				</dict>

I have this SSDT to do the DeInit:

DefinitionBlock ("", "SSDT", 2, "Apple", "Radeon", 0x00001000)
{
    External (_SB_.PCI0.PEG0.PEGP, DeviceObj)    // (from opcode)

    Scope (\_SB.PCI0.PEG0.PEGP)
    {
        OperationRegion (PCIB, PCI_Config, Zero, 0x0100)
        Field (PCIB, AnyAcc, NoLock, Preserve)
        {
            Offset (0x10), 
            BAR0,   32, 
            BAR1,   32, 
            BAR2,   64, 
            BAR4,   32, 
            BAR5,   32
        }

        Method (_INI, 0, NotSerialized)  // _INI: Initialize
        {
            If (LEqual (BAR5, Zero))
            {
                Store (BAR2, Local0)
            }
            Else
            {
                Store (BAR5, Local0)
            }

            OperationRegion (GREG, SystemMemory, And (Local0, 0xFFFFFFFFFFFFFFF0), 0x8000)
            Field (GREG, AnyAcc, NoLock, Preserve)
            {
                Offset (0x6800), 
                GENA,   32, 
                GCTL,   32, 
                LTBC,   32, 
                Offset (0x6810), 
                PSBL,   32, 
                SSBL,   32, 
                PTCH,   32, 
                PSBH,   32, 
                SSBH,   32, 
                Offset (0x6848), 
                FCTL,   32, 
                Offset (0x6EF8), 
                MUMD,   32
            }

            Store (Zero, FCTL)
            Store (Zero, PSBH)
            Store (Zero, SSBH)
            Store (Zero, LTBC)
            Store (One, GENA)
            Store (Zero, MUMD)
        }
    }
}

When I use all this I get gIOScreenLockState 3.

 

If I keep everything as above but enable DeInit in Clover, it boots fine.

 

Any assistance would be appreciated!

Link to comment
Share on other sites
MacWannaBe
MacWannaBe
Posted
Posted

Don't use this patch: "Rename PEGP to GFX0" and it should work.

If you rename PEGP to GFX0, your SSDT could not work, because it doesn't find any PEGP.

 

 

This worked!!! Thank you.

 

Better to rename PEGP in ssdt to GFX0

 

Sent from my ONEPLUS A5000 using Tapatalk

 

How do I do this? Can I do it in this same SSDT? Currently I'm not patching and SSDT other than with hotpaching in clover.

Actually, I changed the SSDT to be:


   External (_SB_.PCI0.PEG0.GFX0, DeviceObj)    // (from opcode)

    Scope (\_SB.PCI0.PEG0.GFX0)

Kept my renaming in config and it worked as well... now to attempt to use the Acre frame buffer!

Link to comment
Share on other sites
MacWannaBe
MacWannaBe
Posted
Posted

If you really have RX580, than ACRE is the wrong Framebuffer, cause it is using only 3 connectors: DP, HDMI and DVI.

Correct Framebuffer should be ORINOCO with five connectors: DP,DP, HDMI, HDMI and DVI

 

I have a RX560 with 3 connectors, DP, HDMI and DVI. I looked at a bunch of different SSDTs and I'm trying to configure it based on my card. This is what I have so far... how can double check all of these or add others that might be needed? I know the DeviceID is correct for me 0x67FF.

        Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
        {
                If (LEqual (Arg2, Zero))
                {
                    Return (Buffer (One)
                    {
                         0x03                                           
                    })
                }
                Return (Package (0x18)
                {
                    "AAPL,slot-name", 
                    Buffer (0x07)
                    {
                        "Slot-1"
                    }, 
                    "@0,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    }, 
                    "@0,AAPL,boot-display", 
                    Buffer (One)
                    {
                         0x00                                           
                    }, 
                    "@1,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    }, 
                    "@2,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    }, 
                    "@3,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    }, 
                    "@4,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    },
                    "@5,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    },           
                    "ATY,VendorID", 
                    Buffer (0x02)
                    {
                         0x02, 0x10                                     
                    }, 
                    "ATY,DeviceID", 
                    Buffer (0x02)
                    {
                         0xFF, 0x67                                     
                    }, 
                    "model", 
                    Buffer (0x12)
                    {
                        "AMD Radeon RX 560"
                    }, 
                    "hda-gfx", 
                    Buffer (0x0A)
                    {
                        "onboard-1"
                    }
               })
            }
        }
        Device (HDAU)
        {
            Name (_ADR, One)  // _ADR: Address
            Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If (LEqual (Arg2, Zero))
                {
                    Return (Buffer (One)
                    {
                         0x03                                           
                    })
                }
                Return (Package (0x04)
                {
                    "layout-id", 
                    Buffer (0x04)
                    {
                         0x01, 0x00, 0x00, 0x00                         
                    }, 
                    "hda-gfx", 
                    Buffer (0x0A)
                    {
                        "onboard-1"
                    }
                })
            }
        }
Link to comment
Share on other sites
Pavo
Pavo
Posted
Posted

 

I have a RX560 with 3 connectors, DP, HDMI and DVI. I looked at a bunch of different SSDTs and I'm trying to configure it based on my card. This is what I have so far... how can double check all of these or add others that might be needed? I know the DeviceID is correct for me 0x67FF.

        Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
        {
                If (LEqual (Arg2, Zero))
                {
                    Return (Buffer (One)
                    {
                         0x03                                           
                    })
                }
                Return (Package (0x18)
                {
                    "AAPL,slot-name", 
                    Buffer (0x07)
                    {
                        "Slot-1"
                    }, 
                    "@0,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    }, 
                    "@0,AAPL,boot-display", 
                    Buffer (One)
                    {
                         0x00                                           
                    }, 
                    "@1,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    }, 
                    "@2,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    }, 
                    "@3,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    }, 
                    "@4,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    },
                    "@5,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Acre"
                    },           
                    "ATY,VendorID", 
                    Buffer (0x02)
                    {
                         0x02, 0x10                                     
                    }, 
                    "ATY,DeviceID", 
                    Buffer (0x02)
                    {
                         0xFF, 0x67                                     
                    }, 
                    "model", 
                    Buffer (0x12)
                    {
                        "AMD Radeon RX 560"
                    }, 
                    "hda-gfx", 
                    Buffer (0x0A)
                    {
                        "onboard-1"
                    }
               })
            }
        }
        Device (HDAU)
        {
            Name (_ADR, One)  // _ADR: Address
            Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If (LEqual (Arg2, Zero))
                {
                    Return (Buffer (One)
                    {
                         0x03                                           
                    })
                }
                Return (Package (0x04)
                {
                    "layout-id", 
                    Buffer (0x04)
                    {
                         0x01, 0x00, 0x00, 0x00                         
                    }, 
                    "hda-gfx", 
                    Buffer (0x0A)
                    {
                        "onboard-1"
                    }
                })
            }
        }

2 things:

 

1. You have 5 connectors in your SSDT, you only have 3 then you only need 0-2

2. If you use AppleALC with lilu+applealc and patch your DSDT with HDAS then you need to change your HDMI audio to be onboard-2

 

But I asm using a RX 580 and only use Lilu+Whatevergreen with 2x monitors D-DVI and DP with no problems with using RadeonFramebuffer

  • Like 1
Link to comment
Share on other sites
SiddRamesh
SiddRamesh
Posted
Posted

I thing I got QE/CI! 

 

But now my only concern is 30-bit colors(its present in 10.11.6), how can I achieve it !


Sir I got QE/CI with screen  :)

 

Now my only concern is, how can I unlock 30-bit color (I got it in 10.11.6) !

 

AMD6000Controller/LVDS  -Pondweed 

 

​Sir its strange I've injected 2 FB patches 

 

1. AMD FrameBuffer Utility 

 

FB           02000000 00010000 19010100 00000000 10000505 00000000 (LVDS) 

Patch      02000000 40000000 09010100 00000000 10010007 00000000 

 

2. Manually Generated 

 

FB            00040000 04030000 00010000 12040105. (DP)

Patch       02000000 40000000 08010000 10000107

post-941217-0-52733300-1513136712_thumb.png

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...