Jump to content

Tracing back the AMD GPU wakeup issue to its origin

Mieze

By Mieze,
in ATi

 Share
368 posts in this topic

Recommended Posts

SiddRamesh
SiddRamesh
Posted
Posted

Ive tried everything but no luck, Everyitme ATI is inject i get panic on 10.13.1, its working gr8 on 10.11.6.

N if i ignore ATI Inject, AMD6000 n AMD3000 controller load but no QE/CI.

 

1.FakeID

2.Mieze DSDT Patch

3.DeInit

4.AMD6000 Controller Patch

5.WhateverGreen 

6.replacing 4 kext as @slice said in one thread..

7.Directly patching Farmebuffer in AMD6000Controller 

 

m using AMDFrameBufferUtility App

 

The panic is regarding Legacy AMD ...

 

Link to comment
Share on other sites
nms
nms
Posted
Posted

Ive tried everything but no luck, Everyitme ATI is inject i get panic on 10.13.1, its working gr8 on 10.11.6.

N if i ignore ATI Inject, AMD6000 n AMD3000 controller load but no QE/CI.

 

1.FakeID

2.Mieze DSDT Patch

3.DeInit

4.AMD6000 Controller Patch

5.WhateverGreen 

6.replacing 4 kext as @slice said in one thread..

7.Directly patching Farmebuffer in AMD6000Controller 

 

m using AMDFrameBufferUtility App

 

The panic is regarding Legacy AMD ...

 

Looks like system can not extract EDID of the monitor. You should help it, by injecting EDID.

Link to comment
Share on other sites
Gigamaxx
Gigamaxx
Posted
Posted

Ive tried everything but no luck, Everyitme ATI is inject i get panic on 10.13.1, its working gr8 on 10.11.6.

N if i ignore ATI Inject, AMD6000 n AMD3000 controller load but no QE/CI.

 

1.FakeID

2.Mieze DSDT Patch

3.DeInit

4.AMD6000 Controller Patch

5.WhateverGreen 

6.replacing 4 kext as @slice said in one thread..

7.Directly patching Farmebuffer in AMD6000Controller 

 

m using AMDFrameBufferUtility App

 

The panic is regarding Legacy AMD ...

 

 

 

 

Try this kext. AMDRadeonX4000HWServiceskext.  It had ID 0x66411002, edited to 0x68411002, also edited the 0x68401002.   This new metal2 for High Sierra has 3 device IDs required for the AMD graphics kext bundles.   

AMDRadeonX4000HWServices.kext.zip

Link to comment
Share on other sites
hackaro
hackaro
Posted
Posted

Hi,

 

finally everything is almost working! Multimonitor is working perfectly now for my XFX RX 580 8GB ... with DeInit in Clover (v.4297) and Mieze's code in form of SSDT! Thanks Mieze, Slice, CyberDevs and Von Morks!  :thumbsup_anim: 

 

 

The problem is audio HDMI ... for some strange reason is not working while it was with WhatEverGreen kext... anyone has any hint? 

SSDT_RX580_XFX.zip

  • Like 1
Link to comment
Share on other sites
Mieze
Mieze
Posted
  • Author
Posted

Hi,

 

finally everything is almost working! Multimonitor is working perfectly now for my XFX RX 580 8GB ... with DeInit in Clover (v.4297) and Mieze's code in form of SSDT! Thanks Mieze, Slice, CyberDevs and Von Morks!  :thumbsup_anim:

 

 

The problem is audio HDMI ... for some strange reason is not working while it was with WhatEverGreen kext... anyone has any hint? 

Which value does the "hda-gfx" property of device HDEF have?

 

Mieze

  • Like 1
Link to comment
Share on other sites
Mieze
Mieze
Posted
  • Author
Posted

@hackaro: It's "onboard-1" but it should be "onboard-2" in case you use "onboard-1" for device HDAU and the AMD GPU because this property links the graphics device to the audio device.

 

Mieze

  • Like 2
Link to comment
Share on other sites
hackaro
hackaro
Posted
Posted

@hackaro: It's "onboard-1" but it should be "onboard-2" in case you use "onboard-1" for device HDAU and the AMD GPU because this property links the graphics device to the audio device.

 

Mieze

still not working even with "onboard-2" in SSDT... do you need some more files?

Another thing that I feel to point out is that no matter what FB you specify in the SSDT it seems to me that it loads the AMDframebuffer one. That's to say the generic one... that's leading to have only 2 DP ports working out of 3... I didn't test the HDMI yet, but I will soon with 3 monitors attached... 

https://www.dropbox.com/s/nluayy5qzvc27hg/Screenshot%202017-11-17%2003.07.15.png?dl=0

 

here is the generic FB... 

Link to comment
Share on other sites
Mieze
Mieze
Posted
  • Author
Posted

still not working even with "onboard-2" in SSDT... do you need some more files?

Another thing that I feel to point out is that no matter what FB you specify in the SSDT it seems to me that it loads the AMDframebuffer one. That's to say the generic one... that's leading to have only 2 DP ports working out of 3... I didn't test the HDMI yet, but I will soon with 3 monitors attached... 

This indicates that there is a problem with the SSDT regarding the GPU. Take a look at device GFX0's method _DSM. The lines

                        If (LEqual (Arg2, Zero))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }

are missing. Without them it won't work. I must have missed that at first glance.

 

Mieze

  • Like 2
Link to comment
Share on other sites
xtddd
xtddd
Posted
Posted

This indicates that there is a problem with the SSDT regarding the GPU. Take a look at device GFX0's method _DSM. The lines

                        If (LEqual (Arg2, Zero))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }

are missing. Without them it won't work. I must have missed that at first glance.

 

Mieze

hi, no need to use ssdt if adding Radeondeinit=true in config.plist. right?

Link to comment
Share on other sites
hackaro
hackaro
Posted
Posted

This indicates that there is a problem with the SSDT regarding the GPU. Take a look at device GFX0's method _DSM. The lines

                        If (LEqual (Arg2, Zero))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }

are missing. Without them it won't work. I must have missed that at first glance.

 

Mieze

 

ok, I modified as follow:

/*
 * Intel ACPI Component Architecture
 * AML/ASL+ Disassembler version 20161210-64(RM)
 * Copyright (c) 2000 - 2016 Intel Corporation
 * 
 * Disassembling to non-symbolic legacy ASL operators
 *
 * Disassembly of iASLneKcV3.aml, Thu Nov  9 19:45:36 2017
 *
 * Original Table Header:
 *     Signature        "SSDT"
 *     Length           0x000026B7 (9911)
 *     Revision         0x02
 *     Checksum         0xD4
 *     OEM ID           "PegSsd"
 *     OEM Table ID     "PegSsdt"
 *     OEM Revision     0x00001000 (4096)
 *     Compiler ID      "INTL"
 *     Compiler Version 0x20161210 (538317328)
 */
DefinitionBlock ("", "SSDT", 2, "PegSsd", "PegSsdt", 0x00001000)
{
    External (_SB_.GGOV, MethodObj)    // 1 Arguments (from opcode)
    External (_SB_.ISME, MethodObj)    // 1 Arguments (from opcode)
    External (_SB_.PCI0, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG0, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG0.PEGP, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG1, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG1.PEGP, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG2, DeviceObj)    // (from opcode)
    External (_SB_.PCI0.PEG2.PEGP, DeviceObj)    // (from opcode)
    External (_SB_.SGOV, MethodObj)    // 2 Arguments (from opcode)
    External (_SB_.SHPO, MethodObj)    // 2 Arguments (from opcode)
    External (GPRW, MethodObj)    // 2 Arguments (from opcode)

   If (CondRefOf (\_SB.PCI0.PEG0.PEGP))
    {
        Scope (\_SB.PCI0.PEG0.PEGP)
        {
            Device (AMD0)
            {
                Name (_ADR, 0x00080000)  // _ADR: Address
                Device (GFX0)
                {
                    Name (_ADR, Zero)  // _ADR: Address
                    OperationRegion (PCIB, PCI_Config, Zero, 0x0100) // <--- from here...
                    Field (PCIB, AnyAcc, NoLock, Preserve)
                    {
                        Offset (0x10), 
                        BAR0,   32, 
                        BAR1,   32, 
                        BAR2,   64, 
                        BAR4,   32, 
                        BAR5,   32
                    }

                    Method (_INI, 0, NotSerialized)  // _INI: Initialize
                    {
                        If (LEqual (BAR5, Zero))
                        {
                            Store (BAR2, Local0)
                        }
                        Else
                        {
                            Store (BAR5, Local0)
                        }

                        OperationRegion (GREG, SystemMemory, And (Local0, 0xFFFFFFFFFFFFFFF0), 0x8000)
                        Field (GREG, AnyAcc, NoLock, Preserve)
                        {
                            Offset (0x6800), 
                            GENA,   32, 
                            GCTL,   32, 
                            LTBC,   32, 
                            Offset (0x6810), 
                            PSBL,   32, 
                            SSBL,   32, 
                            PTCH,   32, 
                            PSBH,   32, 
                            SSBH,   32, 
                            Offset (0x6848), 
                            FCTL,   32, 
                            Offset (0x6EF8), 
                            MUMD,   32
                        }

                        Store (Zero, FCTL)
                        Store (Zero, PSBH)
                        Store (Zero, SSBH)
                        Store (Zero, LTBC)
                        Store (One, GENA)
                        Store (Zero, MUMD)
                    } // <--- to here is MIEZEs code to get it work w/o LILU and WhatEverGreen

                    Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method  // <--- from here...
                    {
                        If (LEqual (Arg2, Zero))
                {
                    Return (Buffer (One)
                    {
                         0x03                                           
                    })
                }

                        Return (Package (0x14)
                {
                    "AAPL,slot-name", 
                    Buffer (0x07)
                    {
                        "Slot-1"
                    }, 

                    "@0,AAPL,boot-display", 
                    Buffer (One)
                    {
                         0x00                                           
                    }, 

                    "@0,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Orinoco"
                    }, 

                    "@1,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Orinoco"
                    }, 

                    "@2,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Orinoco"
                    }, 

                    "@3,name", 
                    Buffer (0x0C)
                    {
                        "ATY,Orinoco"
                    }, 

                    "ATY,VendorID", 
                    Buffer (0x02)
                    {
                         0x02, 0x10                                     
                    }, 

                    "ATY,DeviceID", 
                    Buffer (0x02)
                    {
                         0xD7, 0x67                                     
                    }, 

                    "model", 
                    Buffer (0x12)
                    {
                        "AMD Radeon RX 580"
                    }, 

                    "hda-gfx", 
                    Buffer (0x0A)
                    {
                        "onboard-2"
                    }
                })
            }
        }

                Device (HDAU)
                {
                    Name (_ADR, One)  // _ADR: Address
                    Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                    {
                        If (LEqual (Arg2, Zero))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }

                        Return (Package (0x04)
                        {
                            "layout-id", 
                            Buffer (0x04)
                            {
                                 0x01, 0x00, 0x00, 0x00                         
                            }, 

                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-2"
                            }
                        })
                    }
                }
            } // <--- to here your specific GFX-Card values to be used

            Method (DTGP, 5, NotSerialized)
            {
                If (LEqual (Arg0, ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d")))
                {
                    If (LEqual (Arg1, One))
                    {
                        If (LEqual (Arg2, Zero))
                        {
                            Store (Buffer (One)
                                {
                                     0x03                                           
                                }, Arg4)
                            Return (One)
                        }

                        If (LEqual (Arg2, One))
                        {
                            Return (One)
                        }
                    }
                }

                Store (Buffer (One)
                    {
                         0x00                                           
                    }, Arg4)
                Return (Zero)
            }

            Name (LTRE, Zero)
            OperationRegion (PCIS, PCI_Config, Zero, 0x0100)
            Field (PCIS, AnyAcc, NoLock, Preserve)
            {
                PVID,   16, 
                PDID,   16
            }

            Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
            {
                Return (GPRW (0x69, 0x04))
            }
        }
    }
}

but still no success. No HDMI audio and generic FB...

Link to comment
Share on other sites
Mieze
Mieze
Posted
  • Author
Posted

but still no success. No HDMI audio and generic FB...

Use Clover to inject the framebuffer. This is the easy way. First, get the correct framebuffer working and, after that, fix the audio.

 

Mieze

Link to comment
Share on other sites
hackaro
hackaro
Posted
Posted

Use Clover to inject the framebuffer. This is the easy way. First, get the correct framebuffer working and, after that, fix the audio.

 

Mieze

 

Not possible, because the "RadeonDeInit" flag implies you have the ATI inject not ticked, therefore Clover won't load any frame buffer no matter what you specify. 

Link to comment
Share on other sites
Mieze
Mieze
Posted
  • Author
Posted

Not possible, because the "RadeonDeInit" flag implies you have the ATI inject not ticked, therefore Clover won't load any frame buffer no matter what you specify. 

You can use Clover to inject the framebuffer and use the DSDT-patch/SSDT to fix the wakeup issue. That's the method I'm using.

 

Mieze

Link to comment
Share on other sites
hackaro
hackaro
Posted
Posted

You can use Clover to inject the framebuffer and use the DSDT-patch/SSDT to fix the wakeup issue. That's the method I'm using.

 

Mieze

https://www.dropbox.com/s/1el03q5chp2bl16/Screenshot%202017-11-17%2003.43.05.png?dl=0

 

probably not working with all the configurations ... because now it loads the FB but it says RX480 when it's 580 and there is still no sound ... I guess this method needs more work... 

@Mieze

 

Making a summary:

 

  • method works in solving black screen and wake/sleep issues
  • method works (partially) in multi monitor configurations. 2 DP ports working out of 3, HDMI not tested yet.
  • method is not working in loading the chosen FB
  • method is not working in giving HDMI output

if you need more files or dumps for investigating, I'm available. Thank for all your efforts! 

 

 

goodnight   :)

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Not possible, because the "RadeonDeInit" flag implies you have the ATI inject not ticked, therefore Clover won't load any frame buffer no matter what you specify. 

No, RadeonDeInit works regardless of other conditions. You may set or not ATI inject.

  • Like 3
Link to comment
Share on other sites
MattsCreative
MattsCreative
Posted
Posted

if we are now working on connectors the 290x could use the biggest fix only dual monitors at a time when it can do 4 monitors would be greatful to anyone who gets me 3 screens not even WEG could fix this issues

Link to comment
Share on other sites
giacomoleopardo
giacomoleopardo
Posted
Posted

@Mieze @vit9696

I'm following with a lot of interest this thread. Maybe this will sound a bit naive, but I wonder how come the wathevergreen.kext could make HDMI audio working and Mieze's method  in some cases (like the hackaro's one) not. Is something missing there?

Besides that, this is really something. Thank you guys!

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...