dss862 Posted November 8, 2017 Share Posted November 8, 2017 i followed ur instruction by expanding the installeid.dmg copy the package folder to macos install data folder(installation folder of the hdd)and within macos install data folder i created system/installation/package ... lastly copy the osinstall.mpkg to macos insta;; data folder still got this error osinstall.mpkg is either damaged or missing...i also used latest fake smc.kext (oct 17,2017).. no enumeriable.efi in uefi64 folder use the latest clover bootloader, and clover configurator...i am using dell 7559 uhd... i didn't encountered this problem when i installed 10.12.6...please help..i am runningout of options Link to comment Share on other sites More sharing options...
jaymack Posted November 8, 2017 Share Posted November 8, 2017 Try using recovery for the installation drive. It takes longer, but works for me. Link to comment Share on other sites More sharing options...
dss862 Posted November 8, 2017 Share Posted November 8, 2017 For 2nd part of installation there is no recovery the only options available is install high sierra externak, pre boot,and install mac os high sierra from hdd Link to comment Share on other sites More sharing options...
Gigamaxx Posted November 8, 2017 Share Posted November 8, 2017 For 2nd part of installation there is no recovery the only options available is install high sierra externak, pre boot,and install mac os high sierra from hdd I’m not sure if this is pertinent to you but Slice had mentioned you may need the FF and FFM to be properly set in clover bootloader. This is the Firmware Features and Firmware Features Mask in the Symbios section of Clover or clover configurator. Check your boot manager menu (Symbios section) for these values, if they are 0x00000 then it may be an issue. A fresh instal with the default clover settings may work which means not using your modified config.plist for the install. Link to comment Share on other sites More sharing options...
dss862 Posted November 9, 2017 Share Posted November 9, 2017 there's no problem with the firmware only with osinstall .mpkg is either missing or damaged Link to comment Share on other sites More sharing options...
crazybirdy Posted November 9, 2017 Share Posted November 9, 2017 there's no problem with the firmware only with osinstall .mpkg is either missing or damaged If you still get the same error of OSInstall.mpkg, use mouse to find the top side tool bar, Windows -> Log -> Show All Logs, upload the install log to forum, we will see the error. 1 Link to comment Share on other sites More sharing options...
dss862 Posted November 9, 2017 Share Posted November 9, 2017 where in the clover menu? Link to comment Share on other sites More sharing options...
crazybirdy Posted November 9, 2017 Share Posted November 9, 2017 where in the clover menu? The screen of error of OSInstall.mpkg. Link to comment Share on other sites More sharing options...
dss862 Posted November 9, 2017 Share Posted November 9, 2017 there is no way to get the install log i was stuck on the 2nd part of installation with the path/ ---osinstall .mpkg is either misssing or damaged error i tried all methods nothing works the only way out is restart Link to comment Share on other sites More sharing options...
crazybirdy Posted November 9, 2017 Share Posted November 9, 2017 there is no way to get the install log i was stuck on the 2nd part of installation with the path/ ---osinstall .mpkg is either misssing or damaged error i tried all methods nothing works the only way out is restart HowTo to rebuild prelinkedkernel. 1. restore BaseSystem.dmg to a partition. 2. copy /System/Library/Kernels/kernel from Core.pkg 3. replace all /System/Library/Extensions from Core.pkg. 4. sudo kextcache -u /Volumes/BaseSystemName Then, you get new prelinkedkernel to boot the installer now. Just replace to be the new prelinkedkernel as you needed. New prelinkedkernel will make usb mouse work on the screen of error of OSInstall.mpkg. Link to comment Share on other sites More sharing options...
dss862 Posted November 9, 2017 Share Posted November 9, 2017 i have no top menu to navigate even i move the mouse on the osinstall.pkg screen error Link to comment Share on other sites More sharing options...
crazybirdy Posted November 9, 2017 Share Posted November 9, 2017 20171109_212234.jpgi have no top menu to navigate even i move the mouse on the osinstall.pkg screen error waiting for seconds on the top side, the top menu will show up. Link to comment Share on other sites More sharing options...
dss862 Posted November 9, 2017 Share Posted November 9, 2017 it's almost 15 minutes nothing shows up at the top even i move the mouse overthere do u have fb account please add me--dss862@gmail.com so that we can chat more easily i want to get rid of this error i was stuck for two weeks now only for this dell 7559 uhd laptop... i got a desktop and dell 7348 laptop never encountered this os install.mpkg error i tried all the methods discussed in this forum and from tonymac .. didn't get pass this error Link to comment Share on other sites More sharing options...
crazybirdy Posted November 9, 2017 Share Posted November 9, 2017 You can boot Disk1mbrInstaller (from MBR patch method), it will show you top menu of the error. You need to make Disk1mbrInstaller only, and need to do step A4, A5 to make usb mouse works. We need install log to find the error of OSInstall.mpkg. or you can find it from target partition if exist. /private/var/log/install.log Link to comment Share on other sites More sharing options...
jaymack Posted November 9, 2017 Share Posted November 9, 2017 there's no problem with the firmware only with osinstall .mpkg is either missing or damaged I always get that message but in my case there is a recovery option available at the Clover boot menu. Link to comment Share on other sites More sharing options...
crazybirdy Posted November 9, 2017 Share Posted November 9, 2017 i mounted basesystem.dmg --then private/var/log . it contains folder asl &com.apple .xpc both empty is this one? i cannot attached the log file extension No, this is the 2017-11-07 stage-1 install log file, not stage-2 log file. You can delete it, and upload stage-2 log file with zip first. You need install log with error of OSInstall.mpkg. Link to comment Share on other sites More sharing options...
dss862 Posted November 9, 2017 Share Posted November 9, 2017 But stage 2 installation nowhere to be found..i mount basesystem.dmg tgen look for private/ var /log it contains 2 empty folders asl& com.apple.xpc Link to comment Share on other sites More sharing options...
crazybirdy Posted November 10, 2017 Share Posted November 10, 2017 But stage 2 installation nowhere to be found..i mount basesystem.dmg tgen look for private/ var /log it contains 2 empty folders asl& com.apple.xpc You can boot Disk1mbrInstaller (from MBR patch method), it will show you top menu of the error. You need to make Disk1mbrInstaller only, and need to do step A4, A5 to make usb mouse works. We need install log to find the error of OSInstall.mpkg. Link to comment Share on other sites More sharing options...
dss862 Posted November 12, 2017 Share Posted November 12, 2017 crazybirdy---installer logs for osinstall.mpkg is either missing or damaged error...please help ..been stuck for two weeks now with this error Installer Log 11-07-17.txt Link to comment Share on other sites More sharing options...
crazybirdy Posted November 12, 2017 Share Posted November 12, 2017 crazybirdy---installer logs for osinstall.mpkg is either missing or damaged error...please help ..been stuck for two weeks now with this error Nov 7 13:46:34 MacBook-Pro OSInstaller[556]: Mutable product: Looking for automation file at /Volumes/MACHD/macOS Install Data/minstallconfig.xml Nov 7 13:46:34 MacBook-Pro OSInstaller[556]: Ignoring stale automation file /Volumes/MACHD/macOS Install Data/minstallconfig.xml (time since IA = -745.668779) Nov 7 13:46:34 MacBook-Pro OSInstaller[556]: Looking for automation file at (null) Nov 7 13:46:34 MacBook-Pro OSInstaller[556]: Install will not be automated. Nov 7 13:46:34 MacBook-Pro OSInstaller[556]: Install will not be automated, automation is required to proceed. Nov 7 13:46:34 MacBook-Pro OSInstaller[556]: Failed to open installer document out of time, you need to re-install stage-1 from full installer app to get "/Volumes/MACHD/macOS Install Data/" again, or boot Disk1mbrInstaller (from MBR patch method). 1 Link to comment Share on other sites More sharing options...
dss862 Posted November 12, 2017 Share Posted November 12, 2017 i remove the ssd and view the files thru another mac there's macos install data in the ssd do u think i have to clear cmos by removing the battery to clear nvram Link to comment Share on other sites More sharing options...
crazybirdy Posted November 12, 2017 Share Posted November 12, 2017 i remove the ssd and view the files thru another mac there's macos install data in the ssddo u think i have to clear cmos by removing the battery to clear nvram out of time, it's time issue, the cmos bios time is out of the create time of "/Volumes/MACHD/macOS Install Data/". 1.you need to re-install stage-1 from full installer app to get "/Volumes/MACHD/macOS Install Data/" again, 2.or boot Disk1mbrInstaller (from MBR patch method). 3.or set cmos bios time to the the create time of "/Volumes/MACHD/macOS Install Data/". Link to comment Share on other sites More sharing options...
dss862 Posted November 13, 2017 Share Posted November 13, 2017 crazybirdy --i cannot get rid of the date nov 7 upon bootup of clover bootloader in verbose mode... i have already delete partition and recreate partition again ,reformat then installed new clover bootloader in first partition and reinstall new redownload high sierra 10.3.1 from app store in 2nd partition ... boot up in verbose mode date is still nov.7 ... is this outof date has to do with osinstall.mpkg error? Link to comment Share on other sites More sharing options...
crazybirdy Posted November 13, 2017 Share Posted November 13, 2017 There are several reasons to cause the error of OSInstall.mpkg, according to you install.log file, it shows out of time is the error of OSInstall.mpkg. it's time issue, the cmos bios time is out of the create time of "/Volumes/MACHD/macOS Install Data/". 1.you need to re-install stage-1 from full installer app to get "/Volumes/MACHD/macOS Install Data/" again, 2.or boot Disk1mbrInstaller (from MBR patch method). 3.or set cmos bios time to the the create time of "/Volumes/MACHD/macOS Install Data/". Link to comment Share on other sites More sharing options...
dss862 Posted November 13, 2017 Share Posted November 13, 2017 There are several reasons to cause the error of OSInstall.mpkg, according to you install.log file, it shows out of time is the error of OSInstall.mpkg. it's time issue, the cmos bios time is out of the create time of "/Volumes/MACHD/macOS Install Data/". 1.you need to re-install stage-1 from full installer app to get "/Volumes/MACHD/macOS Install Data/" again, 2.or boot Disk1mbrInstaller (from MBR patch method). 3.or set cmos bios time to the the create time of "/Volumes/MACHD/macOS Install Data/". the date & time was adjusted at bios setting which was reflected in clover bootup verbose mode but still got osinstall.mpkg error.... attached my new install log today Installer Log 11-13-17.txt Link to comment Share on other sites More sharing options...
Recommended Posts