macOS High Sierra - Final Release is out! (17A365)

xtddd · November 1, 2017

Yeah, that's weird indeed. Try this, on a USB disk install the latest version of clover, edit the config.plist with all the necessary flags and patches, add the kexts you need and see if that makes a difference.

hi.. mouse works fine after adding xhci200..kext with smbios imac18.3..but the cpu always keeped high frequency..so i changed macpro6.1 again.

gujiangjiang · November 1, 2017

Just suddenly happen if playing music or keep itunes without play music.

since 10.13 dp1 ~ now, this issue happen. i tried all to fix itunes crash. but can't fix. in sierra, there was no problem.

strangely, sandybridge laptop is no problem. only happen skylake laptop.

EDIT1.

10.13.2 beta1's apfs seems to be help for itunes crash. not sure. need to test many times

try this. it seems to help itunes crash.

my step

1. put apfs.efi in drivers64UEFI

2. reboot

3. macos start diskutility

4. automately reboot

5. booted osx

and tested it. not sure. better than before now.

Test this apfs.efi from 10.13.2dp1 but still crash....

Cyberdevs · November 1, 2017

hi.. mouse works fine after adding xhci200..kext with smbios imac18.3..but the cpu always keeped high frequency..so i changed macpro6.1 again.

For CPU's frequency you need to have the SSDTs, find Pike's SSDT generator and run it, it will create SSDT's required for power management.

xtddd · November 1, 2017

For CPU's frequency you need to have the SSDTs, find Pike's SSDT generator and run it, it will create SSDT's required for power management.

i only check hwp in clover with macpro6.1..all works fine.....i have not used pike's ssdt for a long time

Cyberdevs · November 1, 2017

i only check hwp in clover with macpro6.1..all works fine.....i have not used pike's ssdt for a long time

Well whatever works for you

Mr MagOO · November 1, 2017

Fix for ICH10 with High Sierra. Now with hot-plug support.

For this we need two binary patches.

First patch fix I/O error for ICH10:
4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B -> 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B 
With second patch will work hot-plug:
89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000 -> 90909090 90909090 90909090 90909090 90909090 90909090 9090
With these two patches I got ICH10 with hot-plug.

Снимок экрана 2017-09-30 в 14.40.42.png

Good luck

Works with my old P5Q DLX (ICH10R), but i noticed that my HDD doesn't sleep with this fix.

I've got a SSD for OS and a HDD for medias on my hack.

I used to use the ESB2 DSDT fake ID and it does the same as this patch (works but no HDD sleep).

The only way to have HDD sleep stills AppleAHCIPort from DP for me.

Did you see this too, guys ?

Anyway, thank you for your work.

Orion's Sword · November 2, 2017

Just suddenly happen if playing music or keep itunes without play music.

since 10.13 dp1 ~ now, this issue happen. i tried all to fix itunes crash. but can't fix. in sierra, there was no problem.

strangely, sandybridge laptop is no problem. only happen skylake laptop.

EDIT1.

10.13.2 beta1's apfs seems to be help for itunes crash. not sure. need to test many times

try this. it seems to help itunes crash.

my step

1. put apfs.efi in drivers64UEFI

2. reboot

3. macos start diskutility

4. automately reboot

5. booted osx

and tested it. not sure. better than before now.

Same here on my Kaby Lake laptop. How can it be related to apfs.efi when I'm using HFS+J?

Badruzeus · November 2, 2017

Same here on my Sky Lake laptop. How can it be related to apfs.efi when I'm using HFS+J?

Is this file exist on ur hSierra installation?

/System/Library/LaunchAgents/com.apple.MDCrashReportd.plist

Orion's Sword · November 2, 2017

Is this file exist on ur hSierra installation?
/System/Library/LaunchAgents/com.apple.MDCrashReportd.plist

No.

Orion's Sword · November 8, 2017

10.13.2 public beta 2 (17C67b) has been released.

chris1111 · November 8, 2017

10.13.2 beta 2 (17C67b) has been released.

last week yes

Orion's Sword · November 8, 2017

last week yes

Public beta 2 is released yesterday.

Badruzeus · November 9, 2017

Public beta 2 is released yesterday.

I think bcoz 10.13.2 Beta 2 and Dev Beta 2 have a same build number, the reason why.. only Apple devs could give the answer

https://developer.apple.com/news/releases/

Orion's Sword · November 9, 2017

I think bcoz 10.13.2 Beta 2 and Dev Beta 2 have a same build number, the reason why.. only Apple devs could give the answer

https://developer.apple.com/news/releases/

It's been happening since the first public beta of 10.13. It can be quite clear if you look at the software update history. In my hack, it's showing "Developer beta" although it is set to receive only the public betas. For example, today I've updated the OS to public beta 2 (which is released two days ago), but look at the history, it says "macOS High Sierra 10.13.2 Developer Beta". Similarly, ALL of the entries in the history contain "Developer beta" NOT "Public beta" which I have never seen in the previous OSes.

Muntashirs-MBP:~ muntashir$ softwareupdate --history | grep "Dev"
macOS High Sierra 10.13.2 Developer Beta           2          11/09/2017, 09:49:13  
macOS High Sierra Developer Beta                   1          11/03/2017, 07:54:58  
macOS High Sierra Developer Beta                   1          11/03/2017, 03:08:38  
macOS High Sierra Developer Beta                   9          11/02/2017, 07:14:49  
macOS High Sierra Developer Beta                   7          08/22/2017, 22:57:37  
macOS High Sierra Developer Beta                   6          08/17/2017, 07:58:35  
macOS High Sierra Developer Beta                   5          08/10/2017, 17:52:36  
macOS High Sierra Developer Beta                   4          07/27/2017, 06:22:08  
macOS High Sierra Developer Beta                   3          07/25/2017, 03:45:58

pinarek · November 10, 2017

@Muntashir....

softwareupdate --history | grep "Dev"

thank you for this good Tip !

esmith1977 · December 8, 2017

Fix for ICH10 with High Sierra. Now with hot-plug support.

For this we need two binary patches.

First patch fix I/O error for ICH10:
4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B -> 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B 
With second patch will work hot-plug:
89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000 -> 90909090 90909090 90909090 90909090 90909090 90909090 9090
With these two patches I got ICH10 with hot-plug.

Снимок экрана 2017-09-30 в 14.40.42.png

Good luck

Sunki

I don't think this patch works for High Sierra 10.13.2...

Can you confirm this?

What is the new patch?

KGP-iMacPro · December 31, 2017

:thumbsup_anim: :drool: World's first iMac Pro Hackintosh :drool:

:plane: :hbd:

BALDY_MAN · December 31, 2017

Great news. well done

ramontorres · January 31, 2018

Because all the sata ports are well recognized, I try only Hot-Plug patch : Hot-Pluging work like a charm on my system. Great Job

After patching, do the HDD icons shown as external ? (orange = hot swap capable)

I applied the patch but nothing change:

<key>KextsToPatch</key>

<array>

<dict>

<key>Comment</key>

<string>Fix hotplug for 10.13</string>

<data>

icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=

</data>

<string>AppleAHCIPort</string>

<key>Replace</key>

<data>

kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=

</data>

</dict>

</array>

chris1111 · January 31, 2018

After patching, do the HDD icons shown as external ? (orange = hot swap capable)

I applied the patch but nothing change:

<key>KextsToPatch</key>

       <array>

           <dict>

               <key>Comment</key>

               <string>Fix hotplug for 10.13</string>

               <key>Find</key>

               <data>

               icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=

               </data>

               <key>Name</key>

               <string>AppleAHCIPort</string>

               <key>Replace</key>

               <data>

               kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=

               </data>

           </dict>

       </array>

You need this for Orange Icon HD

<dict>

<key>Comment</key>

<string>External icons patch</string>

<key>Disabled</key>

<data>RXh0ZXJuYWw=</data>

<string>AppleAHCIPort</string>

<key>Replace</key>

<data>SW50ZXJuYWw=</data>

</dict>

ramontorres · January 31, 2018

You need this for Orange Icon HD

<dict>

<key>Comment</key>

<string>External icons patch</string>

<key>Disabled</key>

<false/>

<key>Find</key>

<data>RXh0ZXJuYWw=</data>

<key>Name</key>

<string>AppleAHCIPort</string>

<key>Replace</key>

<data>SW50ZXJuYWw=</data>

</dict>

Thaks for your reply.

When hot plug is activated in BIOS, macOS shows the drives capable of that feature as external (orange icons), some users don't like that and apply this patch for change orange icons (it's just a cosmetic change).

I'm facing the oposite situation, I activate hot plug in BIOS but the icons don't change to orange as supose to, and Disk Utility report the drives are not ejectable, even using the second patch posted by SunKi (post #185).

Atomic_Sheep · March 16, 2018

On 9/30/2017 at 3:09 AM, SunKi said:
Fix for ICH10 with High Sierra. Now with hot-plug support.

For this we need two binary patches.

First patch fix I/O error for ICH10:
4585F60F 95C289C8 83E0FE66 85C9780F 84D2750B -> 89C883E0 FE6685C9 0F98C141 08CC9090 9090750B 
With second patch will work hot-plug:
89C82540 6002003D 40200000 750C81E1 BF7FFFFF 898B5101 0000 -> 90909090 90909090 90909090 90909090 90909090 90909090 9090
With these two patches I got ICH10 with hot-plug.

Good luck

How do you apply this patch? What do I need to do? I haven't applied these kinds of patches before.

Edited March 16, 2018 by Atomic_Sheep

chris1111 · March 16, 2018

@Atomic_Sheep

applying under <key>KextsToPatch</key> with Clover Configurator

Find / Replace

Frank Nitty · March 18, 2018

Has anyone figured out a method to update from 10.13.1 to 10.13.3 using incremental updates w/o having to reinstall from the macOS app store

arsradu · March 26, 2018

On 3/18/2018 at 10:40 PM, Frank Nitty said:

Has anyone figured out a method to update from 10.13.1 to 10.13.3 using incremental updates w/o having to reinstall from the macOS app store

Maybe this will work (assuming you are already on 10.13.1):

10.13.2 Update: https://support.apple.com/kb/DL1946?locale=en_US

10.13.2 Supplemental Update: https://support.apple.com/kb/DL1951?locale=en_US (this should probably be installed after the regular 10.13.2 update)

10.13.3 Update: https://support.apple.com/kb/DL1954?locale=en_US

OR

10.13.3 Combo Update: https://support.apple.com/kb/DL1953?locale=en_US

Edited March 26, 2018 by arsradu

macOS High Sierra - Final Release is out! (17A365)

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites