Jump to content

macOS High Sierra - Final Release is out! (17A365)

Allan

By Allan,
in Front Page News and Rumors

 Share
426 posts in this topic

Recommended Posts

Badruzeus
Badruzeus
Posted
Posted

I did not read it at all  :P  Can you please provide a link ?

I actually give the link, not sure if U missed it bcoz ur mach is too fast, or ur internet.. even with my old phone I could click it hah haaa  :lol:

Link to comment
Share on other sites
Sinetek
Sinetek
Posted
Posted

Hey guys, how goes.
I'm trying to install High Sierra on an external USB here, and it doesn't seem to work.
I've got the installer going, that completes fine to an external USB on APFS.
Then there's an initial reboot, at that time you need to boot the partition to continue the installation. That seems to reboot quickly.
I boot again to continue the installation, then that completes successfully in ~15 minutes.

But then when I try to boot the installed system, I get errors at the Clover level, in the apfs.efi  layer:

 

fs_read_stream:12997: failed to lookup pos 0 in obj 18
can't read cache..
read error 0x7

fs_get_inode_with_hint:7825: failed to load inode 764087 ret 22.

Anybody has an idea?

Link to comment
Share on other sites
chris1111
chris1111
Posted
Posted

Hey guys, how goes.

I'm trying to install High Sierra on an external USB here, and it doesn't seem to work.

I've got the installer going, that completes fine to an external USB on APFS.

Then there's an initial reboot, at that time you need to boot the partition to continue the installation. That seems to reboot quickly.

I boot again to continue the installation, then that completes successfully in ~15 minutes.

 

But then when I try to boot the installed system, I get errors at the Clover level, in the apfs.efi  layer:

 

fs_read_stream:12997: failed to lookup pos 0 in obj 18

can't read cache..

read error 0x7

 

fs_get_inode_with_hint:7825: failed to load inode 764087 ret 22.

 

Anybody has an idea?

make a signature of the hardware

Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

 

Thanks, and sorry for the off-topic. :) I was looking for that thread actually. And I could only find the closed one. I still don't have the update...for some reason. But thank you for the info!

 

If a mod could move my posts to the right thread, I would very much appreciate it. :)

Link to comment
Share on other sites
Guest ricoc90
Guest ricoc90
Posted
Posted

Thanks, and sorry for the off-topic. :) I was looking for that thread actually. And I could only find the closed one. I still don't have the update...for some reason. But thank you for the info!

 

If a mod could move my posts to the right thread, I would very much appreciate it. :)

It is not an update, you'll need to download the full installer

Alright, for those who are curious about 10.13.1 Beta 3 (17B42a), here is the solution to download the installer:

 

The link of 10.13.1 installer hasn't been changed, in consequence the old link is still available: macappstores://itunes.apple.com/app/id1209167288

Note: You need to copy/paste it in Safari, and Mac App Store will be launched with the download page of 10.13.1 Beta installer.

 

Oh. I forgot to mention. If you haven't enrolled your Mac/Hack with Developer Seed yet, you need to install a pkg from Apple, you can gather it here:             #26           

 

To sum it up:

You can download 10.13.1 Beta 3 installer just like what you've done for the prior 10.13.0 Beta installers. Nothing changed.  ;)

Link to comment
Share on other sites
blayze®
blayze®
Posted
Posted

I have Intel HD 630. Nvidia onboard but I am on laptop, so its optimum. We all know optimum does not work regardless. Anywayz, all through Sierra my graphics acceleration worked. After upgrading to High Sierra (10.13), it worked. Now that these new 10.13.1 beta releases are out, I get stuck with on the boot screen at  "IOconsole user...gIOLockscreenstate" <-(something like that) and can not boot into macos to login or anything. It looks like it is trying too as screen dims a little, but will not load to show graphic acceleration (or graphics period) as it has been doing in previous versions. Did something change since 10.13.1 beta update 2 graphic wise or something? 59168680 will not work. I have the latest apfs, intelgraphicsfixup, luli, coredisplay and the - boot tags. I'm on Dell XPS 15 9560 4k laptop on 10.13.1 Beta 3 (17B42a).  

Link to comment
Share on other sites
Badruzeus
Badruzeus
Posted
Posted

I have Intel HD 630. Nvidia onboard but I am on laptop, so its optimum. We all know optimum does not work regardless. Anywayz, all through Sierra my graphics acceleration worked. After upgrading to High Sierra (10.13), it worked. Now that these new 10.13.1 beta releases are out, I get stuck with on the boot screen at  "IOconsole user...gIOLockscreenstate" <-(something like that) and can not boot into macos to login or anything. It looks like it is trying too as screen dims a little, but will not load to show graphic acceleration (or graphics period) as it has been doing in previous versions. Did something change since 10.13.1 beta update 2 graphic wise or something? 59168680 will not work. I have the latest apfs, intelgraphicsfixup, luli, coredisplay and the - boot tags. I'm on Dell XPS 15 9560 4k laptop on 10.13.1 Beta 3 (17B42a).  

r U using r4243? Try this >>>

Link to comment
Share on other sites
Maf3r0
Maf3r0
Posted
Posted

Well, I realize that I'm not be able to pass this by myself:

 

attachicon.gifIMG_20170927_185919641.jpg

 

What is missing? :cry:

Just for sharing, now I can answer this question:

 

Was missing a single dsdt fix: FixHeaders_20000000. Without it, I can't boot up into High Sierra.

 

Of course that I don't know why :) but, now I have system running better and faster then earlier.

 

Thanks to chris1111 for provide me a EFI to test.

  • Like 2
Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

does anyone have the patch for XHCI port limit Z270  on 10.13 (17A405) ?

I guess they should be the same as the Z170 series? What's the problem with your USB ports? As fa as I know you have two sets of USB 3.0 chipsets on your mainboard according to Asus's web site; Intel and ASMedia. Which ports doesn't work?

 

 

Intel® Z270 Chipset : 

6 x USB 3.1 Gen 1 port(s) (4 at back panel, blue, 2 at mid-board)

Intel® Z270 Chipset : 

6 x USB 2.0 port(s) (2 at back panel, black, 4 at mid-board)

ASMedia® USB 3.1 controller : 

1 x USB 3.1 front panel connector port(s) 

ASMedia® USB 3.1 controller : 

2 x USB 3.1 Gen 2 port(s) (2 at back panel, black+red, Type-A + USB Type-CTM)

 

 

 

post-1011040-0-08136100-1509014871_thumb.png

Link to comment
Share on other sites
UltraLaser
UltraLaser
Posted
Posted

I guess they should be the same as the Z170 series? What's the problem with your USB ports? As fa as I know you have two sets of USB 3.0 chipsets on your mainboard according to Asus's web site; Intel and ASMedia. Which ports doesn't work?

 

 

Intel® Z270 Chipset : 

6 x USB 3.1 Gen 1 port(s) (4 at back panel, blue, 2 at mid-board)

Intel® Z270 Chipset : 

6 x USB 2.0 port(s) (2 at back panel, black, 4 at mid-board)

ASMedia® USB 3.1 controller : 

1 x USB 3.1 front panel connector port(s) 

ASMedia® USB 3.1 controller : 

2 x USB 3.1 Gen 2 port(s) (2 at back panel, black+red, Type-A + USB Type-CTM)

 

 

 

I have sleep problem with usb, if i unplug all the internal device the sleep works fine.

And i have some strange configurations in usb info like the screenshot.

 

I think the asmedia is linked to usbhost and cause the mistakes.

post-1373167-0-14698000-1509038851_thumb.png

post-1373167-0-67402400-1509038856_thumb.png

post-1373167-0-28631100-1509038862.png

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

I have sleep problem with usb, if i unplug all the internal device the sleep works fine.

And i have some strange configurations in usb info like the screenshot.

 

I think the asmedia is linked to usbhost and cause the mistakes.

Are you using a CustomSSDT-UIAC.aml for USB ports? if not try to create one and see if that helps.

  • Like 1
Link to comment
Share on other sites
UltraLaser
UltraLaser
Posted
Posted

Are you using a CustomSSDT-UIAC.aml for USB ports? if not try to create one and see if that helps.

 

Yes, created and remove 6 entry that i don't use so i remain in 15 port limit.

But the problem still remain, i think is asmedia controller that cause this mistake...

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

I have instant wake After slepp. If i unplug the usb2 interna (from mobo) the sleep works well

Those USB 2.0 ports are on the Intel Chipset so it's not the problem on ASMedia. What happens if you drop the SSDT-UIAC.aml? on High Sierra all of my USB ports are working without the SSDT, only USBInjectAll.kext and the port limit patch.

 

Intel® Z270 Chipset : 

6 x USB 2.0 port(s) (2 at back panel, black, 4 at mid-board)

Link to comment
Share on other sites
xtddd
xtddd
Posted
Posted

I guess they should be the same as the Z170 series? What's the problem with your USB ports? As fa as I know you have two sets of USB 3.0 chipsets on your mainboard according to Asus's web site; Intel and ASMedia. Which ports doesn't work?

 

 

Intel® Z270 Chipset : 

6 x USB 3.1 Gen 1 port(s) (4 at back panel, blue, 2 at mid-board)

Intel® Z270 Chipset : 

6 x USB 2.0 port(s) (2 at back panel, black, 4 at mid-board)

ASMedia® USB 3.1 controller : 

1 x USB 3.1 front panel connector port(s) 

ASMedia® USB 3.1 controller : 

2 x USB 3.1 Gen 2 port(s) (2 at back panel, black+red, Type-A + USB Type-CTM)

 

@cyberdevs, i have planed to update my rig to ga-z270-hd3 i7-7700k rx580.

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted
before, i first selected dell l502x laptop, its good. but too loud fan noise, and heavy weight. take up a lot of space.

finally i selected hp probook 4230s for music box and installation snow leopard(i like it).

it has usb3.0/fingerprint(not work in osx)/modem(not work in osx).

and strong body and light weight and compact size. it support dd3rl ram. but use 1333 MHz. not important for me

also can control fan speed(thanks to rehabman). no more suffer fan noise.

 

arrived HS 10.13

post-980913-0-00485300-1509355414_thumb.png

 

arrived SL 10.6.8

post-980913-0-16319600-1509355422_thumb.png

 

thanks to rehabman for guide

  • Like 5
Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

Does 8600GT works on High Sierra or Sierra?

I searched internet but I didn't found last supported mac os for that card..

8600gt works on sierra. I used it before. Now i changed 8600gt to gt710. Not sure 8600gt work on HS.

 

나의 LG-F800S 의 Tapatalk에서 보냄

  • Like 2
Link to comment
Share on other sites
Lucy183
Lucy183
Posted
Posted

8600gt works on sierra. I used it before. Now i changed 8600gt to gt710. Not sure 8600gt work on HS.

 

나의 LG-F800S 의 Tapatalk에서 보냄

Thanks, I'd put it already on Sierra because my hd5870 died :(

Also it works only with inject Nvidia unchecked, is this a problem?

 

Sent from my HTC One M9 using Tapatalk

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...