Jump to content

Cualquier configuración me da P-states


Tatocr
 Share

1 post in this topic

Recommended Posts

Buenas tardes.

Arranco mi hackintosh con Sierra 10.12.6, pongo a trabajar a Geekbench y después a AppleIntelinfo.kext y esto es lo que me entrega al segundo o tercer intento pues el primero suele ser mas pobre:

 

 
 
Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x717ff0b0ad (15 MHz)
MWAIT C-States...........................: 270624
 
Processor Brandstring....................: Intel® Core i5-4440 CPU @ 3.10GHz
 
Processor Signature..................... : 0x306C3
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 3
 - Model................................ : 0x3C (60)
 
Model Specific Registers (MSRs)
------------------------------------------
 
MSR_IA32_PLATFORM_ID.............(0x17)  : 0x4000000000000
------------------------------------------
 - Processor Flags...................... : 1
 
MSR_CORE_THREAD_COUNT............(0x35)  : 0x40004
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 4
 
MSR_PLATFORM_INFO................(0xCE)  : 0x80838F3011F00
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x1F (3100 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 0 (LMP not supported)
 - Number of ConfigTDP Levels........... : 0 (only base TDP level available)
 - Maximum Efficiency Ratio............. : 8
 - Minimum Operating Ratio.............. : 8
 
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E000402
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)
 
MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x1814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 0 (C3 is the max C-State to include)
 
IA32_MPERF.......................(0xE7)  : 0x3122F06C65
IA32_APERF.......................(0xE8)  : 0x31FEC38803
 
MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------
 
MSR_IA32_PERF_STATUS.............(0x198) : 0x226C00002000
------------------------------------------
 - Current Performance State Value...... : 0x2000 (3200 MHz)
 
MSR_IA32_PERF_CONTROL............(0x199) : 0x2100
------------------------------------------
 - Target performance State Value....... : 0x2100 (3300 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)
 
IA32_CLOCK_MODULATION............(0x19A) : 0x0
 
IA32_THERM_INTERRUPT.............(0x19B) : 0x0
 
IA32_THERM_STATUS................(0x19C) : 0x88390000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 57
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)
 
MSR_THERM2_CTL...................(0x19D) : 0x0
 
IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)
 
MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x641400
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 0
 
MSR_MISC_PWR_MGMT................(0x1AA) : 0x1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 0 (thermal interrupt not rerouted)
 - SpeedShift Technology Enable......... : 0 (disabled)
 - SpeedShift Interrupt Coordination.... : 0 (disabled)
 - SpeedShift Energy Efficient Perf..... : 0 (disabled)
 - SpeedShift Technology Setup for HWP.. : No (not setup for HWP)
 
MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x21212121
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 21 (3300 MHz) 
 - Maximum Ratio Limit for C02.......... : 21 (3300 MHz) 
 - Maximum Ratio Limit for C03.......... : 21 (3300 MHz) 
 - Maximum Ratio Limit for C04.......... : 21 (3300 MHz) 
 
IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)
 
MSR_POWER_CTL....................(0x1FC) : 0x4005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)
 
MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)
 
MSR_PKG_POWER_LIMIT..............(0x610) : 0xFFD00000EA82
------------------------------------------
 - Package Power Limit #1............... : 3408 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 0 (2 milli-Seconds)
 - Package Power Limit #2............... : 4090 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 0 (2 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)
 
MSR_PKG_ENERGY_STATUS............(0x611) : 0x4EC6D59
------------------------------------------
 - Total Energy Consumed................ : 5041 Joules (Watt = Joules / seconds)
 
MSR_PP0_POWER_LIMIT..............(0x638) : 0xFFD0
------------------------------------------
 - Power Limit.......................... : 4090 Watt
 - Enable Power Limit................... : 1 (enabled)
 - Clamping Limitation.................. : 0 (disabled)
 - Time Window for Power Limit.......... : 0 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)
 
MSR_PP0_ENERGY_STATUS............(0x639) : 0x3522358
------------------------------------------
 - Total Energy Consumed................ : 3400 Joules (Watt = Joules / seconds)
 
MSR_PP0_POWER_LIMIT..............(0x638) : 0xFFD0
------------------------------------------
 - Power Limit.......................... : 4090 Watt
 - Enable Power Limit................... : 1 (enabled)
 - Clamping Limitation.................. : 0 (disabled)
 - Time Window for Power Limit.......... : 0 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)
 
MSR_PP0_ENERGY_STATUS............(0x639) : 0x35223CA
------------------------------------------
 - Total Energy Consumed................ : 3400 Joules (Watt = Joules / seconds)
 
MSR_PP1_POWER_LIMIT..............(0x640) : 0xFFD0
------------------------------------------
 - Power Limit.......................... : 4090 Watt
 - Enable Power Limit................... : 1 (enabled)
 - Clamping Limitation.................. : 0 (disabled)
 - Time Window for Power Limit.......... : 0 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)
 
MSR_PP1_ENERGY_STATUS............(0x641) : 0x353C3
------------------------------------------
 - Total Energy Consumed................ : 13 Joules (Watt = Joules / seconds)
 
MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24
 
MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x1F
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x0
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x8842
MSR_PKGC6_IRTL...................(0x60b) : 0x8873
MSR_PKGC7_IRTL...................(0x60c) : 0x8891
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x16D9F96D1E
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x16D9F96D1E
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
 
IA32_TSC_DEADLINE................(0x6E0) : 0x71858D06A4
 
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 31 (3100 MHz)
Maximum Turbo Ratio/Frequency............: 33 (3300 MHz)
 
IGPU Info:
------------------------------------------
IGPU Current Frequency...................:  200 MHz
IGPU Minimum Frequency...................:  200 MHz
IGPU Maximum Non-Turbo Frequency.........:  350 MHz
IGPU Maximum Turbo Frequency.............: 1100 MHz
IGPU Maximum limit.......................: No Limit
 
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (31) 32 ] iGPU P-States [ (4) ]
CPU C3-Cores [ 0 2 ]
CPU C6-Cores [ 0 2 ]
CPU C7-Cores [ 0 1 2 ]
CPU P-States [ (8) 29 31 32 ] iGPU P-States [ (4) ]
CPU P-States [ 8 26 29 (31) 32 ] iGPU P-States [ (4) ]
CPU C3-Cores [ 0 1 2 ]
CPU P-States [ (8) 25 26 29 31 32 ] iGPU P-States [ (4) ]
CPU C3-Cores [ 0 1 2 3 ]
CPU P-States [ (8) 25 26 29 30 31 32 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 25 26 28 29 30 31 32 ] iGPU P-States [ (4) ]
CPU C7-Cores [ 0 1 2 3 ]
CPU P-States [ 8 18 25 26 28 29 30 (31) 32 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 18 24 25 26 28 29 30 31 32 ] iGPU P-States [ (4) ]
CPU P-States [ 8 17 18 24 25 26 28 29 30 (31) 32 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 17 18 22 24 25 26 28 29 30 31 32 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 15 17 18 22 24 25 26 28 29 30 31 32 ] iGPU P-States [ (4) ]
CPU P-States [ 8 15 17 18 21 22 24 25 26 28 29 30 (31) 32 ] iGPU P-States [ (4) ]
CPU P-States [ 8 15 17 18 21 22 24 25 26 28 29 30 31 32 (33) ] iGPU P-States [ (4) ]
CPU P-States [ (8) 15 17 18 21 22 23 24 25 26 28 29 30 31 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ 8 15 17 18 21 22 23 24 25 26 27 28 29 30 (31) 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 14 15 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 11 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 11 13 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 10 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27 28 29 30 31 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ (8) 10 11 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 ] iGPU P-States [ (4) ]
CPU P-States [ 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 (33) ] iGPU P-States [ (4) ]
CPU C6-Cores [ 0 2 3 ]
iMac-de-Tato:~ tato$ 

 

 
 
 
Sin saber interpretar esto bien veo que p-states están casi todos y de c-states ando pobre. Lo curioso es que el resultado es el mismo con:

clover generándolos;

clover sin generarlos (y con Drop OEM marcado) y SSDT de Piker-Alpha;

 Con clover sin generarlos y sin SSDT;

Y con clover sin generarlos, sin SSDT y sin DSDT.

 

¿De donde salen ? ¿Quien los genera? No entiendo nada.

Link to comment
Share on other sites

 Share

×
×
  • Create New...