Shaneee Posted October 5, 2017 Share Posted October 5, 2017 Thanks guys. Think I replaced something else as well lol I'm just going to install the 10.12.6 update again... On another note still can't get GPU to work on HS Tried Sierra, El Cap and even Yosemite NV kexts for a last ditched attempt with no success Link to comment Share on other sites More sharing options...
swipii Posted October 5, 2017 Share Posted October 5, 2017 Gigamaxx can you please send me your EFI / CLOVER for your Vega Card? Maybe i do something wrong here... thank you very much.. and all other for help too! Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 5, 2017 Author Share Posted October 5, 2017 The curios is.. when i use a version of transmac now - its going a bit further but stop on waiting for root device.. i get crazy... what the hell is wrong with this {censored}. try boot arg. PCIRootUUID=0 or =1 Link to comment Share on other sites More sharing options...
swipii Posted October 5, 2017 Share Posted October 5, 2017 Nope - same Error as at the beginning. Kernel Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 5, 2017 Author Share Posted October 5, 2017 Gigamaxx can you please send me your EFI / CLOVER for your Vega Card? Maybe i do something wrong here... thank you very much.. and all other for help too! Add SN, MLB and UUID.EFI.zip Link to comment Share on other sites More sharing options...
cyrhex Posted October 5, 2017 Share Posted October 5, 2017 @cyrhex that method with the 10.12.6 web drivers didn't work for me Did u copy all the nvda driver found on 10.12.6?,,that trick work for me,, Link to comment Share on other sites More sharing options...
Shaneee Posted October 5, 2017 Share Posted October 5, 2017 Did u copy all the nvda driver found on 10.12.6?,,that trick work for me,, Yeah Link to comment Share on other sites More sharing options...
swipii Posted October 5, 2017 Share Posted October 5, 2017 And again Boot failed. Error loading kernel cache Maybe i have to wait for Transmac Version AMD-OSX_V_6 or something. I dont know whats wrong with this. Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 5, 2017 Author Share Posted October 5, 2017 And again Boot failed. Error loading kernel cache Maybe i have to wait for Transmac Version AMD-OSX_V_6 or something. I dont know whats wrong with this. I had a few KPs in the beginning, I just kept trying, with and without verbose mode. Have you tried single user or safe mode? Link to comment Share on other sites More sharing options...
swipii Posted October 5, 2017 Share Posted October 5, 2017 Whatever i do its always kernel cache error. I tryed all testet different drives, different versions of clover, plist from others, etc. do i have to use a ssd for it? do i have to format it to apfs or something? i dont know - normaly it should be easy. install on hdd, insert kernel und kext, use kext utility, install clover, edit plist with some infos and the kext in 10.13. finished. but nope. nothing The Bootoptions which worked for me at 10.12.6 are: -v slide=0 npci=0x3000 nv_disable=1 keepsyms=1 debug=0x100 EHCIacquire=Yes USBLegacyOff=Yes -radoff and Bios from Mac Pro 5.1 Link to comment Share on other sites More sharing options...
Shaneee Posted October 5, 2017 Share Posted October 5, 2017 @swipii the prelinkedkernel needs built that's all. Make sure you aren't booting without caches also. Link to comment Share on other sites More sharing options...
swipii Posted October 5, 2017 Share Posted October 5, 2017 I installed the system.kext and the kernel in system/libary/kernels i deleted the system/libary/prelinkedkernel folder and than rebuild cache and so on.. or what do you mean? @shaneee Link to comment Share on other sites More sharing options...
antrace Posted October 6, 2017 Share Posted October 6, 2017 i just wanted to say thank you to bronya (dude, you rock!), shanee and gigamaxx. after the whole day of try and error and reading alot here i got my high sierra to work. shutdown sometimes doesnt work, but i guess i can live with that. performance of my gtx 770 is slighty worse compared to sierra, but iam only using this machine for music production. thx again and a small question... i can only get rid of the recovery partition from installer,right? or is there any other (easy) way to do it? iam quite a mac noob regards 2 Link to comment Share on other sites More sharing options...
cyrhex Posted October 6, 2017 Share Posted October 6, 2017 Whatever i do its always kernel cache error. I tryed all testet different drives, different versions of clover, plist from others, etc. do i have to use a ssd for it? do i have to format it to apfs or something? i dont know - normaly it should be easy. install on hdd, insert kernel und kext, use kext utility, install clover, edit plist with some infos and the kext in 10.13. finished. but nope. nothing The Bootoptions which worked for me at 10.12.6 are: -v slide=0 npci=0x3000 nv_disable=1 keepsyms=1 debug=0x100 EHCIacquire=Yes USBLegacyOff=Yes -radoff and Bios from Mac Pro 5.1 Try it again,clover bootloader?install clover bootloader on efi partition and put all the necessary kexts on other folder,then copy the efi folder on root partition,then use kextwizard to rebuild cache,u shud create an installer on hdd Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 6, 2017 Author Share Posted October 6, 2017 Whatever i do its always kernel cache error. I tryed all testet different drives, different versions of clover, plist from others, etc. do i have to use a ssd for it? do i have to format it to apfs or something? i dont know - normaly it should be easy. install on hdd, insert kernel und kext, use kext utility, install clover, edit plist with some infos and the kext in 10.13. finished. but nope. nothing The Bootoptions which worked for me at 10.12.6 are: -v slide=0 npci=0x3000 nv_disable=1 keepsyms=1 debug=0x100 EHCIacquire=Yes USBLegacyOff=Yes -radoff and Bios from Mac Pro 5.1 I’ll send you a dsdt it is for r7 1700, but RX 64. Put it in Clover ACPI folder in patched. i just wanted to say thank you to bronya (dude, you rock!), shanee and gigamaxx. after the whole day of try and error and reading alot here i got my high sierra to work. shutdown sometimes doesnt work, but i guess i can live with that. performance of my gtx 770 is slighty worse compared to sierra, but iam only using this machine for music production. thx again and a small question... i can only get rid of the recovery partition from installer,right? or is there any other (easy) way to do it? iam quite a mac noob regards Top tool bar “Go” scroll to “Utilites”, then to “Disk Utility”. Post a screenshot (shift+Windows key+3). Show your us your partitions. Do you see two High Sierra icons in clover? The recovery partition can be ihandy if you want fo fully disable SIP. Or use disk utility to repair a disk so it can boot. It gives you Disk Utility and terminal access when your main drive won’t boot. Link to comment Share on other sites More sharing options...
antrace Posted October 6, 2017 Share Posted October 6, 2017 I’ll send you a dsdt it is for r7 1700, but RX 64. Put it in Clover ACPI folder in patched. Top tool bar “Go” scroll to “Utilites”, then to “Disk Utility”. Post a screenshot (shift+Windows key+3). Show your us your partitions. Do you see two High Sierra icons in clover? The recovery partition can be ihandy if you want fo fully disable SIP. Or use disk utility to repair a disk so it can boot. It gives you Disk Utility and terminal access when your main drive won’t boot. yah i got the point. iam gonna keep it i guess. thx for trying to help... atleast i learned how to make a screenshot 1 Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 6, 2017 Author Share Posted October 6, 2017 yah i got the point. iam gonna keep it i guess. thx for trying to help... atleast i learned how to make a screenshot I'm sorry if it sounded bad but if you can accept it in your clover screen it can save your butt from time to time. I have about 10 disks that it test with and I do format them with no recovery at times but I'm not worried about saving data. When you create your clover build the last window in "customize" the RCscrpits options make the partition. just don't select these when loading to avoid a recovery partition. Link to comment Share on other sites More sharing options...
antrace Posted October 6, 2017 Share Posted October 6, 2017 I'm sorry if it sounded bad but if you can accept it in your clover screen it can save your butt from time to time. I have about 10 disks that it test with and I do format them with no recovery at times but I'm not worried about saving data. When you create your clover build the last window in "customize" the RCscrpits options make the partition. just don't select these when loading to avoid a recovery partition. nono, it didnt sound bad. in fact it does make sense. i didnt know about the rcscripts and will keep this in mind. just one last question. does it make a difference if i install the needed kext with kext wizard or is it okay to just inject them with clover? i mean it works like it should and i only wonder why people ever really install kexts. some will get lost anyway due to updates, right? oh, and i was honest about the screenshot thing. i didnt mean to be rude or something 1 Link to comment Share on other sites More sharing options...
jsl Posted October 6, 2017 Share Posted October 6, 2017 (edited) Thanks guys. Think I replaced something else as well lol I'm just going to install the 10.12.6 update again... On another note still can't get GPU to work on HS Tried Sierra, El Cap and even Yosemite NV kexts for a last ditched attempt with no success According to my testing of High Sierra in FX-6300 & Ryzen 1700X hackintoshs at 10.13GM(17A365), only very few AMD GPUs are compatible: Asus or MSI 5770, 6870, and 7950 are working now ! The others such as Nvidia GT-730 & GTX-680 which worked perfectly in my Intel hackintosh was not compatible at all. I had wasted a lot of time and energy trying to make it work, but all in vain ! Just for your reference because your previous kernels for FX-6300 hackintosh are my favorite too. Edited October 6, 2017 by jsl 2 Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 6, 2017 Author Share Posted October 6, 2017 nono, it didnt sound bad. in fact it does make sense. i didnt know about the rcscripts and will keep this in mind. just one last question. does it make a difference if i install the needed kext with kext wizard or is it okay to just inject them with clover? i mean it works like it should and i only wonder why people ever really install kexts. some will get lost anyway due to updates, right? oh, and i was honest about the screenshot thing. i didnt mean to be rude or something Yes, the kexts being placed in S/L/Extensions can get replaced but this usually happens to modified graphics kexts AMD4000kext, etc... Many of the kexts lke FakeSMCkext, lilu and green will remain after updates. Apple doesn't remove and replace them. Sometimes its a lot easier to put them there for booting especially FakeSMCKext. Clover doesn't always inject correctly and many times you need those kexts. I installed the system.kext and the kernel in system/libary/kernels i deleted the system/libary/prelinkedkernel folder and than rebuild cache and so on.. or what do you mean? @shaneee OK use this prelinked kernel. click on it to unzip it before placing in S/L/Prelinked Kernels. Put the kexts from Clover kext folder 10.13 in S/L/Extensions and run Kext tool. This is where you put the System Kext earlier. Prelinked.zip DSDT.aml .zip 1 Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 6, 2017 Author Share Posted October 6, 2017 Yeah Ryzen High Sierra GT210 This worked for me, Clover 4020, Inject Nvidia, Nvidia no EFI. First try after changing cards. I knew they added these for a reason. . That’s Uningine Valley basic at 4fps, we’re rockin! Link to comment Share on other sites More sharing options...
babynof Posted October 6, 2017 Share Posted October 6, 2017 @Gigamaxx Did you use Pandora to make your installer? Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 6, 2017 Author Share Posted October 6, 2017 @Gigamaxx Did you use Pandora to make your installer? I have not made an installer I cheated. I used a disk from a previous intel Hackintosh build. Its much easier, if you have a working Mac or Hack with HS installed just use Carbon Copy Cloner or other to make a copy of HS using a USB to sata adapter or with Hack sata connection. Once you have a fresh copy just add kernel and System kext and run Kext repair tool, I used kext wizard. Add clover to EFi and test it. You can also load it from the Downloaded app to a fresh disk and if you catch it at the 3rd? restart and unplug the usb or interrupt the restart the disk will be ready for the initial instal and build configuration. This gives you whatever System ID that you want instead of an initial MacBook def at the base of its origin. Either way its easier to use a ready made copy of HS form an intel setup. Link to comment Share on other sites More sharing options...
swipii Posted October 6, 2017 Share Posted October 6, 2017 I will test it thank you Giga! What should i do with the Iimmutablekernel? UPDATE: I added your last prelinked kernel now it stops at ACPI Error AE Not Found DSDT table load failed / Namespace lookup failure UPDATE2: I added your DSDT file to patched - but now its stops at FakeSMCKeyStore: started UPDATE3: I deleted all the new kext from Extations - now it stops at ACPI Error 1 table load failure UPDATE4: I begin from new with your prelinked kernel and kernel etc efi etc. now it comes to apple loading bar (in verbose it runs like hell text in seconds but at 50% it restart.) UPDATE5: at 50% the system tries to rebuild prelinked kernel - after restart i got a kernel cache error again.. wtf? after restart it goes again to boot and apple loading bar.. will see now whats the problem is.. but i'm better then yesterday UPDATE6: it says something about cant rebuild prelinked kernel, etc etc Failed to generate prelinked kernel. error 107 rebuilding /s/l/Pre/prelinkedkernel dev/disk0s2 on (hfs,local, journald) bash: /etc/rc.sever: no such file or directory early boot Link to comment Share on other sites More sharing options...
Shaneee Posted October 6, 2017 Share Posted October 6, 2017 What cheapish GPUs are working in 10.13? Going to need to get another On another note I now need to reinstall Sierra because I broke it trying to get my GT 430 working in 10.13... Stupid mistake. Link to comment Share on other sites More sharing options...
Recommended Posts