cyrhex Posted October 4, 2017 Share Posted October 4, 2017 @shanne,,have u found the trick for ur gt 430 to work in high sierra? Link to comment Share on other sites More sharing options...
jsl Posted October 4, 2017 Share Posted October 4, 2017 Thank you very much ! Without Shaneee's kernel/System.kext and your Clover's config.plist I can not boot to desktop at 10.13GM(17A365). Good news: The same kernel/System.kext and config.plist are still working at 10.13.1 beta (17B25c). But networking and Safari/Firefox are not working yet due to download failed. Link to comment Share on other sites More sharing options...
Shaneee Posted October 4, 2017 Share Posted October 4, 2017 @shanne,,have u found the trick for ur gt 430 to work in high sierra? No luck at all. Tried Sierra roll back of kexts and frameworks with no success. Link to comment Share on other sites More sharing options...
XLNC Posted October 4, 2017 Share Posted October 4, 2017 If you're able to boot into your Recovery HD, you can convert your HFS+ installation to APFS from there diskutil ap convert /dev/diskxsx Thanks ! that worked Booted to recovery and converted to APFS. @XCiLNZ You still can install these drivers with 'Pacifist' or extract them and install manually. Already tried that and it doesnt work. After installing nvidia web driver and and booting with nvidia web option in clover (SIP DISABLED) it always get stucks at this screen: And i cannot boot with SIP ENABLED too. so what actually worked for me was the Lilu + NVWebDriverLibValFix.kext now it doesnt get stuck at the above screen . No luck at all. Tried Sierra roll back of kexts and frameworks with no success. do you get stuck at this screen ? If not then can you send a pic of the screen where you get stuck at ? Good news: The same kernel/System.kext and config.plist are still working at 10.13.1 beta (17B25c). But networking and Safari/Firefox are not working yet due to download failed. how is the performance on it ? Link to comment Share on other sites More sharing options...
Duran Keeley Posted October 4, 2017 Share Posted October 4, 2017 Can you guys check this out if you have time? Just open terminal and cd to your dir where xnu-builder is and run: sh ./xnu-builder.sh Link to comment Share on other sites More sharing options...
Gigamaxx Posted October 4, 2017 Author Share Posted October 4, 2017 Just open terminal and cd to your dir where xnu-builder is and run: sh ./xnu-builder.sh Thanks for the reply, my xnu builder is in the root wheel with the other Dtrace and lib folders. They all end up in “users” do I need to specify root wheel? Also, should I run this before or after compiling? Thanks again, I appreciate it and hopefully we can get a Ryzen kernel for testing soon. Link to comment Share on other sites More sharing options...
Shaneee Posted October 4, 2017 Share Posted October 4, 2017 do you get stuck at this screen ? If not then can you send a pic of the screen where you get stuck at ? Yeah that's where it gets stuck. Link to comment Share on other sites More sharing options...
XLNC Posted October 4, 2017 Share Posted October 4, 2017 Yeah that's where it gets stuck. ok do this : - boot to safe mode - then go to S/L/E and delete the following files that starts with "GeF" and "NVD". - now reboot to HS HDD without using inject_nvidia or Nvidia web option in clover config , and you will be able to boot to the desktop. - Now install the latest nvidia web driver for HS and ignore if any alert pop up comes while installing. AND DONT REBOOT YET. -now put Lilu.kext.kext and NVWebDriverLibValFix.kext in the Clover/kexts/others folder. http://www95.zippyshare.com/v/6HrJWEnB/file.html -now boot with nvidia web option enabled in clover config. Link to comment Share on other sites More sharing options...
Bronya Posted October 4, 2017 Share Posted October 4, 2017 Thanks for the reply, my xnu builder is in the root wheel with the other Dtrace and lib folders. They all end up in “users” do I need to specify root wheel? Also, should I run this before or after compiling? Thanks again, I appreciate it and hopefully we can get a Ryzen kernel for testing soon. Hi ! You no can get kernel for Ryzen from builder . You need modified and add support ryzen in xnu ... I created kernel and works fine... But i get problem graphics accelerator and desktop color ... <-- i think that problem videocard or driver ... Send me your 10.12.6 source and I'll port to 10.13.. All credit to you of course. Sorry , no ! I no will give to you . 3 Link to comment Share on other sites More sharing options...
XLNC Posted October 4, 2017 Share Posted October 4, 2017 Hi ! You no can get kernel for Ryzen from builder . You need modified and add support ryzen in xnu ... I created kernel and works fine... But i get problem graphics accelerator and desktop color ... <-- i think that problem videocard or driver ... Desktop.png Sorry , no ! I no will give to you . can you share your 10.13 kernel ? Thanks : ) Link to comment Share on other sites More sharing options...
Bronya Posted October 4, 2017 Share Posted October 4, 2017 You unliked me post? ))) Link to comment Share on other sites More sharing options...
XLNC Posted October 4, 2017 Share Posted October 4, 2017 You unliked me post? ))) lol sorry my bad ! happened by mistake while clicking on quote button I guess. On High Sierra right now and the safari is taking time for loading discord and insanely Mac properly sometimes and I don't know why : ( 1 Link to comment Share on other sites More sharing options...
Bronya Posted October 4, 2017 Share Posted October 4, 2017 Need wait for kernel .... because i want build only from HS ! 1 Link to comment Share on other sites More sharing options...
XLNC Posted October 4, 2017 Share Posted October 4, 2017 Need wait for kernel .... because i want build only from HS ! btw how did you install HS ? by Cloning HS from an intel HDD ? Link to comment Share on other sites More sharing options...
Bronya Posted October 4, 2017 Share Posted October 4, 2017 btw how did you install HS ? by Cloning HS from an intel HDD ? I created kernel_10.13 from sierra 10.12.6 and Xcode 9. I no sure . Then i want created kernel_10.13 from 10.13 =)... by Cloning HS from an intel HDD ? No . On AMD i installed HS =) 2 Link to comment Share on other sites More sharing options...
XLNC Posted October 4, 2017 Share Posted October 4, 2017 I created kernel_10.13 from sierra 10.12.6 and Xcode 9. I no sure . Then i want created kernel_10.13 from 10.13 =)... No . On AMD i installed HS =) through normal HS USB installer ? Link to comment Share on other sites More sharing options...
Shaneee Posted October 4, 2017 Share Posted October 4, 2017 Sorry , no ! I no will give to you . Last time I checked the xnu was open source and so are any modifications made to it... Link to comment Share on other sites More sharing options...
Bronya Posted October 4, 2017 Share Posted October 4, 2017 Last time I checked the xnu was open source and so are any modifications made to it... i gived to you , but you no writed that this by me xnu. And you speaked that you searched and found for ryzen ... me no liked ... 1 Link to comment Share on other sites More sharing options...
Shaneee Posted October 4, 2017 Share Posted October 4, 2017 ok do this : - boot to safe mode - then go to S/L/E and delete the following files that starts with "GeF" and "NVD". - now reboot to HS HDD without using inject_nvidia or Nvidia web option in clover config , and you will be able to boot to the desktop. - Now install the latest nvidia web driver for HS and ignore if any alert pop up comes while installing. AND DONT REBOOT YET. -now put Lilu.kext.kext and NVWebDriverLibValFix.kext in the Clover/kexts/others folder. http://www95.zippyshare.com/v/6HrJWEnB/file.html -now boot with nvidia web option enabled in clover config. Thanks for the suggestion but same issue. Stuck on IOConsoleUsers i gived to you , but you no writed that this by me xnu. And you speaked that you searched and found for ryzen ... me no liked ... Dude I'm not here to steal your code. Anything of yours I add will be credited but I want to learn from it that's all. Link to comment Share on other sites More sharing options...
XLNC Posted October 4, 2017 Share Posted October 4, 2017 @Shaneeedid you try my config to boot ? and you are using clover right ? Link to comment Share on other sites More sharing options...
Shaneee Posted October 4, 2017 Share Posted October 4, 2017 @Shaneee did you try my config to boot ? and using clover right ? Yeah your full folder. @Bronya, can you send me your compiled kernel please. My GPU may not be working due to an error in my code. Link to comment Share on other sites More sharing options...
tikizondo94 Posted October 4, 2017 Share Posted October 4, 2017 Shaneee your latest kernel and system.kext are working flawless for me. No problems what so ever. USB 3.0 is working normal. Nvidia drivers etc all working flawless. I cant get voodooTSCsync.kext to work properly yet, so for now voodoopstate seem to be working much better. Many Thanks!! CLOVER.zip 1 Link to comment Share on other sites More sharing options...
Bronya Posted October 4, 2017 Share Posted October 4, 2017 Kernel by shanee for me is bad , i get opemu error . Link to comment Share on other sites More sharing options...
Shaneee Posted October 4, 2017 Share Posted October 4, 2017 Kernel by shanee for me is bad , i get opemu error . AppleTyMCEDriver removed? I'll test on my machine. My kernel blacklists the kext to stop that happening. Link to comment Share on other sites More sharing options...
Bronya Posted October 4, 2017 Share Posted October 4, 2017 My kernel is fine ... Link to comment Share on other sites More sharing options...
Recommended Posts