Guest ricoc90 Posted July 14, 2017 Share Posted July 14, 2017 Hi, I have a Dell Optiplex 790 with a Sandy Bridge i5 2500K and integrated Intel HD 3000 graphics, which I want to enable.The last couple of days I've read alot about doing this, but I still got a couple of questions, since most of the posts I've found were for laptops and the chimera bootloader, while I'm using Clover.As far as I've read, I need to fake my device id in Clover and add the snb-platform-id in device properties.I need to either use the MacBookPro8,1 or use the MacMini5,1 SMBios. Since my motherboard only has VGA and DisplayPort, I'll need to patch the framebuffer.I've also read that macOS won't identify the VGA monitor automatically, I'd need to do it manually through display settings.Is this correct?Is it possible to use both VGA and DisplayPort in order to use multi displays? I'm currently on a Geforce GT 710. I only want to enable the HD 3000 for AirPlay mirroring. Is it possible to enable the HD 3000 for AirPlay mirroring and use the GT 710 for the display output?Note that in order to boot the system on the HD 3000, I have to take the GT 710 out, otherwise the system posts to the GT 710 rather than the HD 3000.Within my bios I don't have an option to change this. Actually, I don't have an entry for graphics settings at all.Thanks in advance Link to comment Share on other sites More sharing options...
chris1111 Posted July 14, 2017 Share Posted July 14, 2017 Verry simple I Think, config.plist Under FakeID Under Graphics Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 14, 2017 Share Posted July 14, 2017 @HervéThanks for your detailed answer dude! Highly appreciated!The displayport indeed works OOB I am not using the latest BIOS (A18 vs A19), but I'm afraid that the latest update only brings some security patchesWill look into patching the framebuffer to get VGA working. Again: Thanks!@Chris1111Yep, it indeed was that very simple Thanks dude! Link to comment Share on other sites More sharing options...
chris1111 Posted July 14, 2017 Share Posted July 14, 2017 Image 2017-07-14 at 4.13.51 PM.public.png @Chris1111 Yep, it indeed was that very simple Thanks dude! Happy for you its solved I could also be ordered the i5 2500k Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 14, 2017 Share Posted July 14, 2017 @Hervé None of the patches for macmini5,1 are working; I'm getting a signal loss on both of my displays (displayport and VGA)I'll try the MBP8,1 SMBIOS later Link to comment Share on other sites More sharing options...
chris1111 Posted July 15, 2017 Share Posted July 15, 2017 Ha Ha Ha I Just buy a i5 2500k for Fun Buying at KIJIJI Montreal for 80$ Can Delivered included Working good samething like you Display port working like a charm I have a Display Port Adapter cable to HDMI You need disconnect the graphics PCIe About this Mac Graphics High Sierra Geekbench Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 Ha Ha Ha I Just buy a i5 2500k for Fun Buying at KIJIJI Montreal for 80$ Can Delivered included Working good samething like you Display port working like a charm I have a Display Port Adapter cable to HDMI You need disconnect the graphics PCIe I also need to take the PCIe GPU out, otherwise the Optiplex will post to that one instead of iGPU. What is your config? Mine is shown as Intel HD-video 3000 in About this Mac Still struggling to get the VGA working though. Strange thing also is, that originally I am using the imac13,1 SMBios and the displayport works fine. On macmini5,1 it seems a hit and miss... one boot is fine, next boot gives me lots of artifacts. Does somebody know if it's possible to run the HD 3000 and my GT 710 alongside each other? Link to comment Share on other sites More sharing options...
Sherlocks Posted July 15, 2017 Share Posted July 15, 2017 Clover automately detect fakeid and ig-platform-id. No need to input value. But if you have fail, you try what you want 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 Clover automately detect fakeid and ig-platform-id. No need to input value. But if you have fail, you try what you want 나의 LG-F800S 의 Tapatalk에서 보냄 When I don't put these values in my config.plist, I'll get a black screen with white sparkles. If I put the values that Hervé and Chris111 posted in my config.plist, DisplayPort works fine Link to comment Share on other sites More sharing options...
Sherlocks Posted July 15, 2017 Share Posted July 15, 2017 When I don't put these values in my config.plist, I'll get a black screen with white sparkles. If I put the values that Hervé and Chris111 posted in my config.plist, DisplayPort works fineGive me clover full log and ioreg What is your resolution? Im not said binary patch Only platformid and fakeid. I see their info already include in clover. Do you have intel inject? 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 Give me clover full log and ioreg What is your resolution? Im not said binary patch Only platformid and fakeid. I see their info already include in clover. Do you have intel inject? 나의 LG-F800S 의 Tapatalk에서 보냄 I was talking about platformid and fakeid too I do inject intel. Resolution is 1920x1080 Clover config, boot log and ioreg attached. Note that the log is with the values added in the config.plist Thanks! Archief.zip Link to comment Share on other sites More sharing options...
Sherlocks Posted July 15, 2017 Share Posted July 15, 2017 I was talking about platformid and fakeid too I do inject intel. Resolution is 1920x1080 Clover config, boot log and ioreg attached. Note that the log is with the values added in the config.plist Thanks! Thank you. I will check it.From your log, clover will be improve. Can you some test in the future? I will give test build to you. 나의 LG-F800S 의 Tapatalk에서 보냄 I was talking about platformid and fakeid too I do inject intel. Resolution is 1920x1080 Clover config, boot log and ioreg attached. Note that the log is with the values added in the config.plist Thanks! How about fakeid empty?Can you test? Fakeid 0x01168086 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 Thank you. I will check it. From your log, clover will be improve. Can you some test in the future? I will give test build to you. Sure! How about fakeid empty? Can you test? Fakeid 0x01168086 Without fakeid set, Clover picks 0x01168086 indeed (see attached bootlog) but there are white sparkles partying on my screen: When I boot without fakeid and platform-id, I have a lightned up black screen with the same white sparkles bootlog.log.txt Link to comment Share on other sites More sharing options...
Sherlocks Posted July 15, 2017 Share Posted July 15, 2017 Okay. really good info How about this? Fakeid 0x01168086 Sb-platform-id 0x00010000 This is last test. I see relation between fakeid and platformid correctly. 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 Okay. really good info How about this? Fakeid 0x01168086 Sb-platform-id 0x00010000 This is last test. I see relation between fakeid and platformid correctly. 나의 LG-F800S 의 Tapatalk에서 보냄 So far, so good No white sparkles. Thanks! Any idea why About this Mac shows "Intel HD-video 3000" instead of "Intel HD Graphics 3000"? bootlog.log.txt Link to comment Share on other sites More sharing options...
chris1111 Posted July 15, 2017 Share Posted July 15, 2017 This Optiplex 790 dont have a switch to PCI or Integral Graphics I dont know if its possible to have a both Graphics GPU @ricoc90 See my image, its show in about this Mac Intel HD Graphics 3000 512 mo 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted July 15, 2017 Share Posted July 15, 2017 So far, so good No white sparkles. Thanks! Any idea why About this Mac shows "Intel HD-video 3000" instead of "Intel HD Graphics 3000"? Schermafbeelding 2017-07-15 om 13.15.36.png Okay. Thank you so much!.I will update clover;) Once return 0x0126 and macmini framebuffer 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 This Optiplex 790 dont have a switch to PCI or Integral Graphics I dont know if its possible to have a both Graphics GPU Yeah, that's what I'm afraid off See my image, its show in about this Mac Intel HD Graphics 3000 512 mo I know, that's why I ask. It's strange since our system is identical Okay. Thank you so much!. I will update clover;) Once return 0x0126 and macmini framebuffer 나의 LG-F800S 의 Tapatalk에서 보냄 Will try it in a moment Edit: Everything okay with macmini5,1 smbios, fakeid 0x01268086 and platform-id 0x00010000. Will try VGA later Link to comment Share on other sites More sharing options...
chris1111 Posted July 15, 2017 Share Posted July 15, 2017 Yeah, that's what I'm afraid off I know, that's why I ask. It's strange since our system is identical Will try it in a moment System is not identical, I have 24 Gig of Ram and the config.plist not identical for sure I am used smbios iMac IM121 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 System is not identical, I have 24 Gig of Ram and the config.plist not identical for sure I am used smbios iMac IM121 Yeah I meant the same CPU, same board, same chipset et cetera I'll try imac12,1 now, but I indeed think it must be something with my config.plist Link to comment Share on other sites More sharing options...
chris1111 Posted July 15, 2017 Share Posted July 15, 2017 Yeah I meant the same CPU, same board, same chipset et cetera I'll try imac12,1 now, but I indeed think it must be something with my config.plist Yes try imac12,1, let me know Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 Yes try imac12,1, let me know Nope. Same Hm, maybe because I installed Legacy Clover? I believe you have installed UEFI Clover, right? Link to comment Share on other sites More sharing options...
chris1111 Posted July 15, 2017 Share Posted July 15, 2017 Nope. Same Schermafbeelding 2017-07-15 om 13.59.15.png Do you have SSDT ? here attaching for i5 2500k My Clover is always in ESP Mode Try this config please I have attachig config to try ssdt.aml.zip config.plist.zip Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted July 15, 2017 Share Posted July 15, 2017 Do you have SSDT ? here attaching for i5 2500k My Clover is always in ESP Mode Try this config please I have attachig config to try With your SSDT and config I'm still getting Intel HD-video 3000 I updated Clover to 4114, but didn't make a difference either Edit: also, i'm getting blinking yellow squares on my display Link to comment Share on other sites More sharing options...
chris1111 Posted July 15, 2017 Share Posted July 15, 2017 With your SSDT and config I'm still getting Intel HD-video 3000 I updated Clover to 4114, but didn't make a difference either maybe its in relation with the amount of RAM ? Annyway its purely estetic For the blinking yellow squares on my display ad this <key>PatchVBios</key> <true/> using a thème with a black background that the trick Link to comment Share on other sites More sharing options...
Recommended Posts