okrasit Posted April 4, 2018 Share Posted April 4, 2018 <key>PP_PhmSoftPowerPlayTable</key> <data>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</data> With the above, custom clocks and fan fixed, it's working perfect with RX & FE! No more overheating nor crashing during heavy use (fortnite ). 1 Link to comment Share on other sites More sharing options...
SammlerG Posted April 4, 2018 Share Posted April 4, 2018 Hi @okrasit, can you help me with my VegaFE LC? I think i'm too stupid, i tested it, but it does not work. With Wattman i set GPU Frequency +3%, GPU voltage little bit lower, Memory to 1045 and max. power limit. I think... I'm too stupid for the VegaSoftPowerTableEditor. I found this thread here, http://extreme.pcgameshardware.de/overclocking-grafikkarten/486587-amd-radeon-rx-vega-64-und-rx-vega-56-overclocking-undervolting-thread-post9017138.html but I have no success, and I found that: GFXCLK should be flawed for FE owner, so rather proceed manually is there a chance to overclock a full water cooled Frontier Edition to 1650MHz GPU and 1045 Memory Clock with a modified kext? Link to comment Share on other sites More sharing options...
okrasit Posted April 4, 2018 Share Posted April 4, 2018 (edited) @SammlerG sudo bash nano /System/Library/Extensions/AMD10000Controller.kext/Contents/Info.plist (at near the end of the file add to 'aty_properties' dict the following:) <key>PP_PhmSoftPowerPlayTable</key> <data>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</data> <key>PP_DisablePowerContainment</key> <integer>1</integer> (ctrl+x, to exit & save) touch /System/Library/Extensions; kextcache -update-volume / reboot Edited April 4, 2018 by okrasit 5 1 Link to comment Share on other sites More sharing options...
okrasit Posted April 4, 2018 Share Posted April 4, 2018 (edited) Here's one for anyone with air-cooled card: Core: 1442MHz/1075mV, Memory: 1045MHz/1075mV, SOC: 1199MHz, Temp target: 70, Idle fan: 700rpm tgIIAQBcAOEGAADuKwAAGwBIAAAAgKkDAPBJAgCOAAgAAAAAAAAAAAAAAAAAAAIBXABPAkYClACeAb4AKAF6AIwAvAEAAAAAcgIAAJAAqAJtAUMBlwHwSQIAcQICAgAAAAAAAAgAAAAAAAAABQAHAAMABQAAAAAAAAABCIQDhAOEA4QDhAOEA7YDMwQBATMEAQGEAwAIYOoAAABAGQEAAYA4AQAC3EoBAAOQXwEABAB3AQAFkJEBAAZQvQEABwEI0EwBAAAAgAAAAAAAAByDAQABAAAAAAAAAABwpwEAAgAAAAAAAAAAiLwBAAMAAAAAAAAAADjBAQAEAAAAAAAAAACI1QEABQAAAAABAAAAmPwBAAYAAAAAAQAAAEgzAgAHAAAAAAEAAAAABWDqAAAAQBkBAACAOAEAANxKAQAAkF8BAAAACChuAAAALMkAAAH4CwEAAoA4AQADkF8BAAT0kQEABdCwAQAGOMEBAAcACGw5AAAAJF4AAAH8hQAAAqy8AAADNNAAAARobgEABQiXAQAGsK0BAAcAAWg8AQAAAQQ8QQAAAAAAUMMAAAAAAIA4AQACAAA0mAEABAAAAQgAmIUAAEC1AABg6gAAUMMAAAGAuwAAYOoAAJQLAQBQwwAAAgDhAACUCwEAQBkBAFDDAAADeP8AAEAZAQCIJgEAUMMAAARAGQEAgDgBAIA4AQBQwwAABYA4AQDcSgEA3EoBAFDDAAAGAHcBAAB3AQCQXwEAUMMAAAeQkQEAkJEBAAB3AQBQwwAAARgAAAAAAAAACwAAvAJIJkYACgBUA5ABkAGQAZABkAGQAZABAAAAAAACBDEH3ADcANwAkAEAAFkAaQBKAEoAXwBzAHMAZABAAJCSl2CWAJBVAAAAAAAAAAAAAAAAAAAAAAACAtQwAAACEGDqAAACEA== Core: 1642MHz/1150mV, Memory: 1045MHz/1075mV, SOC: 1199MHz, Temp target: 70, Idle fan: 700rpm 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 Core: 1600MHz/1150mV, Memory: 1045MHz/1075mV, SOC: 1199MHz, Temp target: 70, Idle fan: 700rpm 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 For custom water cooled ones: Core: 1642MHz/1150mV, Memory: 1045MHz/1075mV, SOC: 1199MHz, Temp target: 75, Idle fan: 1000rpm 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 Core: 1750MHz/1200mV, Memory: 1045MHz/1075mV, SOC: 1199MHz, Temp target: 75, Idle fan: 1000rpm 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 Edited April 5, 2018 by okrasit 3 1 1 Link to comment Share on other sites More sharing options...
SammlerG Posted April 4, 2018 Share Posted April 4, 2018 Thx! Now its working. I can see PP_PhmSoftPowerPlayTable in Ioregistryexplorer! And 2000Pts more with Luxmark. Are you using a special reg file? My Hex in the generated Windows Registry file was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ink to comment Share on other sites More sharing options...
okrasit Posted April 4, 2018 Share Posted April 4, 2018 17 minutes ago, SammlerG said: Thx! Now its working. I can see PP_PhmSoftPowerPlayTable in Ioregistryexplorer! And 2000Pts more with Luxmark. Are you using a special reg file? My Hex in the generated Windows Registry file was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ry the hotel lobby on Luxmark, it's less memory speed dependant. Also, there's the 1750MHz version, if you're willing to try. 1 Link to comment Share on other sites More sharing options...
gabilopezb Posted April 5, 2018 Share Posted April 5, 2018 Hey @okrasit huge thanks for the info. AFAIK this is the first time somebody found (and shared) a way of fixing this. I followed all the steps you provided replying to SammlerG. I get no errors during the process but when I reboot the fan keeps spinning like crazy. I repeated the procedure several times (with both the 1750MHz and stock configs) to make sure I was not doing something wrong. Hope you can help, thanks again for sharing! Link to comment Share on other sites More sharing options...
SammlerG Posted April 5, 2018 Share Posted April 5, 2018 13 hours ago, okrasit said: Try the hotel lobby on Luxmark, it's less memory speed dependant. Also, there's the 1750MHz version, if you're willing to try. I'll try it tonight Link to comment Share on other sites More sharing options...
okrasit Posted April 5, 2018 Share Posted April 5, 2018 (edited) 2 hours ago, gabilopezb said: Hey @okrasit huge thanks for the info. AFAIK this is the first time somebody found (and shared) a way of fixing this. I followed all the steps you provided replying to SammlerG. I get no errors during the process but when I reboot the fan keeps spinning like crazy. I repeated the procedure several times (with both the 1750MHz and stock configs) to make sure I was not doing something wrong. Hope you can help, thanks again for sharing! I'm using this: <key>PP_PhmSoftPowerPlayTable</key> <data>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</data> <key>PP_DisablePowerContainment</key> <integer>1</integer> <key>PP_FuzzyFanControl</key> <integer>0</integer> Temperature target: 70C, Core: 1442MHz, Mem: 1045MHz, SOC: 1199MHz. Fan goes full blast on load but returns to 700rpm on idle (eventually, it takes a while ). I'll modify those higher clock versions with this fan fix later! Edited April 5, 2018 by okrasit Link to comment Share on other sites More sharing options...
gabilopezb Posted April 5, 2018 Share Posted April 5, 2018 9 minutes ago, okrasit said: I'm using this: <key>PP_PhmSoftPowerPlayTable</key> <data>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</data> <key>PP_DisablePowerContainment</key> <integer>1</integer> <key>PP_FuzzyFanControl</key> <integer>0</integer> Temperature target: 70C, Core: 1442MHz, Mem: 1045MHz, SOC: 1199MHz. Fan goes full blast on load but returns to 700rpm on idle (eventually, it takes a while ). I'll modify those higher clock versions with this fan fix later! Hey, really appreciate your reply. I think there is something wrong with my system. I tried the config you just posted and same result. When the system boots the fan is probably spinning at 500-700rpm but a couple of minutes after login, the fan goes full blast again and it doesn't stop until a metal process is open (YouTube or QuickTime) as it has been already pointed out here. Is there any way to check wether the patch is applied correctly? Because it seems like it is not working for me Thanks again! Link to comment Share on other sites More sharing options...
okrasit Posted April 5, 2018 Share Posted April 5, 2018 (edited) 2 hours ago, gabilopezb said: Hey, really appreciate your reply. I think there is something wrong with my system. I tried the config you just posted and same result. When the system boots the fan is probably spinning at 500-700rpm but a couple of minutes after login, the fan goes full blast again and it doesn't stop until a metal process is open (YouTube or QuickTime) as it has been already pointed out here. Is there any way to check wether the patch is applied correctly? Because it seems like it is not working for me Thanks again! You can easily verify with Luxmark, see if the clock frequency has changed. Also, try this: 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 100rpm to 2300rpm! I did some googling and found that some people have had problems with "normal" kind of pwm fans on the LC. Maybe the pwm is inverted, so try this too if the one above doesn't work! 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 Edited April 5, 2018 by okrasit 1 Link to comment Share on other sites More sharing options...
wyhtc Posted April 5, 2018 Share Posted April 5, 2018 19 hours ago, okrasit said: Here's one for anyone with air-cooled card: Core: 1442MHz/1075mV Memory: 1045MHz/1075mV Temp target: 75 Idle fan: 2000rpm 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 For water-cooled ones: Core: 1642MHz/1150mV Memory: 1045MHz/1075mV Temp target: 75 Idle fan: 1000rpm 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 Core: 1750MHz/1200mV Memory: 1045MHz/1075mV Temp target: 75 Idle fan: 1000rpm 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 Well done! 1 Link to comment Share on other sites More sharing options...
SammlerG Posted April 5, 2018 Share Posted April 5, 2018 you can use IORegistryExplorer to read core & men clock. Look at your graphics device -> AMDRadeonX5000_AMDVega10GraphicsAccelerator -> PerformanceStatistics you can find all information in HEX -> so convert to decimal 1 Link to comment Share on other sites More sharing options...
Wackymac Posted April 5, 2018 Share Posted April 5, 2018 just wanting to confirm , can this be implemented through an SSDT? i see the results showing in ioreg, but dont really see any performance gains on a vega fe (air) Link to comment Share on other sites More sharing options...
okrasit Posted April 5, 2018 Share Posted April 5, 2018 (edited) 50 minutes ago, Wackymac said: just wanting to confirm , can this be implemented through an SSDT? i see the results showing in ioreg, but dont really see any performance gains on a vega fe (air) Not sure about the SSDT/DSDT but as a Clover kext patch, I think, yes. The reason I started fiddling with this, FE & RX64 Air were crashing due to overheating. There's really no room for overclocking with the stock cooler, actually, it can't even handle the stock clocks. Edited April 5, 2018 by okrasit 1 Link to comment Share on other sites More sharing options...
Wackymac Posted April 5, 2018 Share Posted April 5, 2018 1 minute ago, okrasit said: Not sure about the SSDT/DSDT but as a Clover kext patch, I think, yes. The reason I started fiddling with this, FE & RX64 Air were crashing due to overheating. There's really no room for overclocking with the stock cooler, actually it can't even handle the stock clocks. which is why you clocked it down from 1600>1442 im guessing? Link to comment Share on other sites More sharing options...
okrasit Posted April 5, 2018 Share Posted April 5, 2018 5 minutes ago, Wackymac said: which is why you clocked it down from 1600>1442 im guessing? yes Link to comment Share on other sites More sharing options...
Wackymac Posted April 5, 2018 Share Posted April 5, 2018 (edited) 9 minutes ago, okrasit said: yes alright. well maybe you can help me out. my issue is when it comes to metal, previously ive been able to bench it at just over 205 000 in geekbench. but now all of a sudden im getting around 180 000. i tried just for the hell of it the 1642 and it makes no changes with metal, the 1442 increased luxmark open cl by ~3000 pnts, but had no effect on metal... any ideas on how to bump up metal performance? also are you running an ssdt on your machine? if so, anyway you can share the section for the vega just for me to compare with. Edited April 5, 2018 by Wackymac Link to comment Share on other sites More sharing options...
okrasit Posted April 5, 2018 Share Posted April 5, 2018 4 minutes ago, Wackymac said: alright. well maybe you can help me out. my issue is when it comes to metal, previously ive been able to bench it at just over 205 000 in geekbench. but now all of a sudden im getting around 180 000. i tried just for the hell of it the 1642 and it makes no changes with metal, the 1442 increased luxmark open cl by ~3000 pnts, but had no effect on metal... any ideas on how to bump up metal performance? Actually, if the metal api bench is the same as the OpenCL, it's totally useless. The actual kernels are driven on the card like less than a second each. I'd guess it's due to some changes in the metal api... That said, it's a shame there isn't a good benchmark for MetalAPI for non-apple gear. Try playing Fortnite and you can feel the difference yourself. Link to comment Share on other sites More sharing options...
Wackymac Posted April 5, 2018 Share Posted April 5, 2018 (edited) 2 minutes ago, okrasit said: Actually, if the metal api bench is the same as the OpenCL, it's totally useless. The actual kernels are driven on the card like less than a second each. I'd guess it's due to some changes in the metal api... That said, it's a shame there isn't a good benchmark for MetalAPI for non-apple gear. Try playing Fortnite and you can feel the difference yourself. LOL! ive been trying to not fall into the trap of that game! lol since i dont have access to windows. are you able to post the string to keep the stock clock speed but with your fan adjustments? Edited April 5, 2018 by Wackymac Link to comment Share on other sites More sharing options...
okrasit Posted April 5, 2018 Share Posted April 5, 2018 (edited) 16 minutes ago, Wackymac said: LOL! ive been trying to not fall into the trap of that game! lol since i dont have access to windows. are you able to post the string to keep the stock clock speed but with your fan adjustments? I added it to my earlier post! Let me know if it's stable with that 1150mV core voltage. 1600MHz version too... Edited April 5, 2018 by okrasit Link to comment Share on other sites More sharing options...
Wackymac Posted April 5, 2018 Share Posted April 5, 2018 51 minutes ago, okrasit said: I added it to my earlier post! Let me know if it's stable with that 1150mV core voltage. 1600MHz version too... is there any control to get the fan to spin down to idle speed once a set temp is reached? it seems to get to idle temp and stay at full speed for a little while. Link to comment Share on other sites More sharing options...
okrasit Posted April 5, 2018 Share Posted April 5, 2018 7 minutes ago, Wackymac said: is there any control to get the fan to spin down to idle speed once a set temp is reached? it seems to get to idle temp and stay at full speed for a little while. Nope, that's how apple & amd have designed it to behave. Link to comment Share on other sites More sharing options...
outdoormagic Posted April 5, 2018 Share Posted April 5, 2018 Hi everyone, Had a "Golden Hack" with 1080 + P400 until 10.3.3 became unusable , so I updated to 10.13.4 (17E199) and got a Vega FE . OOB, it shows up as Vega FE 16GB in About Mac and displays over all 4 ports, but Luxmark and Geekbench both report no compute device. I have tried various combinations of latest versions of lilu on/off, whatevergreen on/off, boot flags on/off. Also tried injecting ATI and/or intel on/off. Never seem to get acceleration. Can anyone point me to a start config for 8700K (config and kexts needed)? I'm clearly missing something stupidly obvious. Thanks! Link to comment Share on other sites More sharing options...
okrasit Posted April 5, 2018 Share Posted April 5, 2018 10 minutes ago, outdoormagic said: Hi everyone, Had a "Golden Hack" with 1080 + P400 until 10.3.3 became unusable , so I updated to 10.13.4 (17E199) and got a Vega FE . OOB, it shows up as Vega FE 16GB in About Mac and displays over all 4 ports, but Luxmark and Geekbench both report no compute device. I have tried various combinations of latest versions of lilu on/off, whatevergreen on/off, boot flags on/off. Also tried injecting ATI and/or intel on/off. Never seem to get acceleration. Can anyone point me to a start config for 8700K (config and kexts needed)? I'm clearly missing something stupidly obvious. Thanks! Have you tried disabling the igpu? Link to comment Share on other sites More sharing options...
Recommended Posts