riden666 Posted July 15, 2017 Share Posted July 15, 2017 riden666, please delete flag bus ratio ! And here result . boot-args=npci=0x3000 kext-dev-mode=1 ncl=262144 busratio=36 hw.tbfrequency: 1000000000 hw.cpufrequency_max: 3601000000 hw.cpufrequency_min: 3601000000 hw.cpufrequency: 3601000000 hw.busfrequency_max: 100000000 hw.busfrequency_min: 100000000 hw.busfrequency: 100000000 machdep.tsc.frequency: 3600565200 0:100 0:100 MemLog inited, TSC freq: 3600565200 0:100 0:000 CPU was calibrated without ACPI PM Timer: Intel ICH device was not found., use RTC 0:100 0:000 0:100 0:000 Now is 15.7.2017, 21:22:36 (GMT) 0:100 0:000 Starting Clover revision: 4114 on American Megatrends EFI 0:100 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.5 | XCODE: 8.3.3] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,FF3EF174-38AA-44B7-A131-898CFDE5166D,0x28,0x64000) @DAF31998 0:100 0:000 SelfDirPath = \EFI\BOOT 0:103 0:003 === [ Get Smbios ] ======================================== 0:103 0:000 Type 16 Index = 0 0:103 0:000 Total Memory Slots Count = 4 0:103 0:000 Type 17 Index = 0 0:103 0:000 Table has error information, checking 0:103 0:000 Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0 0:103 0:000 ...memory OK 0:103 0:000 SmbiosTable.Type17->Speed = 3066MHz 0:103 0:000 SmbiosTable.Type17->Size = 0MB 0:103 0:000 SmbiosTable.Type17->Bank/Device = CHANNEL A DIMM 0 0:103 0:000 SmbiosTable.Type17->Vendor = Unknown 0:103 0:000 SmbiosTable.Type17->SerialNumber = Unknown 0:103 0:000 SmbiosTable.Type17->PartNumber = Unknown 0:103 0:000 Type 17 Index = 1 0:103 0:000 Table has error information, checking 0:103 0:000 Found memory information in table 18/2, type=0x3, operation=0x2 syndrome=0x0 0:103 0:000 ...memory OK 0:103 0:000 SmbiosTable.Type17->Speed = 3066MHz 0:103 0:000 SmbiosTable.Type17->Size = 8192MB 0:103 0:000 SmbiosTable.Type17->Bank/Device = CHANNEL A DIMM 1 0:103 0:000 SmbiosTable.Type17->Vendor = Unknown 0:103 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:103 0:000 SmbiosTable.Type17->PartNumber = CMK16GX4M2B3200C16 0:103 0:000 Type 17 Index = 2 0:103 0:000 Table has error information, checking 0:103 0:000 Found memory information in table 18/3, type=0x3, operation=0x2 syndrome=0x0 0:103 0:000 ...memory OK 0:103 0:000 SmbiosTable.Type17->Speed = 3066MHz 0:103 0:000 SmbiosTable.Type17->Size = 0MB 0:103 0:000 SmbiosTable.Type17->Bank/Device = CHANNEL B DIMM 0 0:103 0:000 SmbiosTable.Type17->Vendor = Unknown 0:103 0:000 SmbiosTable.Type17->SerialNumber = Unknown 0:103 0:000 SmbiosTable.Type17->PartNumber = Unknown 0:103 0:000 Type 17 Index = 3 0:103 0:000 Table has error information, checking 0:103 0:000 Found memory information in table 18/4, type=0x3, operation=0x2 syndrome=0x0 0:103 0:000 ...memory OK 0:103 0:000 SmbiosTable.Type17->Speed = 3066MHz 0:103 0:000 SmbiosTable.Type17->Size = 8192MB 0:103 0:000 SmbiosTable.Type17->Bank/Device = CHANNEL B DIMM 1 0:103 0:000 SmbiosTable.Type17->Vendor = Unknown 0:103 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:103 0:000 SmbiosTable.Type17->PartNumber = CMK16GX4M2B3200C16 0:103 0:000 Boot status=0 0:103 0:000 Running on: 'MS-7A37' with board 'B350M MORTAR (MS-7A37)' 0:103 0:000 === [ GetCPUProperties ] ================================== 0:103 0:000 CPU Vendor = 68747541 Model=800F11 0:103 0:000 The CPU supported SSE4.1 0:103 0:000 Looking to disable C1E if is already enabled by the BIOS: 0:103 0:000 BrandString = AMD Ryzen 7 1800X Eight-Core Processor 0:103 0:000 CurrentSpeed: 3600 0:103 0:000 maxratio 72 0:103 0:000 cpudid_zen 8 0:103 0:000 FSBFrequency = 50 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 0:103 0:000 MaxDiv/MinDiv: 36.0/22 0:103 0:000 Turbo: 0/0/0/0 0:103 0:000 Features: 0x178BFBFF 0:103 0:000 Threads: 16 0:103 0:000 Cores: 8 0:103 0:000 FSB: 100 MHz 0:103 0:000 CPU: 3600 MHz 0:103 0:000 TSC: 3600 MHz 0:103 0:000 PIS: 100 MHz 0:103 0:000 ExternalClock: 25 MHz 0:103 0:000 === [ GetDevices ] ======================================== 0:103 0:000 PCI (00|00:00.00) : 1022 1450 class=060000 0:103 0:000 PCI (00|00:01.00) : 1022 1452 class=060000 0:103 0:000 PCI (00|00:01.03) : 1022 1453 class=060400 0:103 0:000 PCI (00|03:00.00) : 1022 43BB class=0C0330 0:103 0:000 PCI (00|03:00.01) : 1022 43B7 class=010601 0:103 0:000 PCI (00|03:00.02) : 1022 43B2 class=060400 0:103 0:000 PCI (00|04:00.00) : 1022 43B4 class=060400 0:103 0:000 PCI (00|04:01.00) : 1022 43B4 class=060400 0:103 0:000 PCI (00|1E:00.00) : 10EC 8168 class=020000 0:103 0:000 - LAN: 0 Vendor=Realtek 0:103 0:000 PCI (00|04:04.00) : 1022 43B4 class=060400 0:103 0:000 PCI (00|1F:00.00) : 1B73 1100 class=0C0330 0:103 0:000 PCI (00|00:02.00) : 1022 1452 class=060000 0:103 0:000 PCI (00|00:03.00) : 1022 1452 class=060000 0:103 0:000 PCI (00|00:03.01) : 1022 1453 class=060400 0:103 0:000 PCI (00|20:00.00) : 10DE 1187 class=030000 0:103 0:000 - GFX: Model=MSI GeForce GTX 760 family E4 (Nvidia) 0:103 0:000 PCI (00|20:00.01) : 10DE 0E0A class=040300 0:103 0:000 - HDMI Audio: 0:103 0:000 PCI (00|00:04.00) : 1022 1452 class=060000 0:103 0:000 PCI (00|00:07.00) : 1022 1452 class=060000 0:103 0:000 PCI (00|00:07.01) : 1022 1454 class=060400 0:103 0:000 PCI (00|21:00.00) : 1022 145A class=130000 0:103 0:000 PCI (00|21:00.02) : 1022 1456 class=108000 0:103 0:000 PCI (00|21:00.03) : 1022 145C class=0C0330 0:103 0:000 PCI (00|00:08.00) : 1022 1452 class=060000 0:103 0:000 PCI (00|00:08.01) : 1022 1454 class=060400 0:103 0:000 PCI (00|22:00.00) : 1022 1455 class=130000 0:103 0:000 PCI (00|22:00.02) : 1022 7901 class=010601 0:104 0:000 PCI (00|22:00.03) : 1022 1457 class=040300 0:104 0:000 PCI (00|00:14.00) : 1022 790B class=0C0500 0:104 0:000 PCI (00|00:14.03) : 1022 790E class=060100 0:104 0:000 PCI (00|00:18.00) : 1022 1460 class=060000 0:104 0:000 PCI (00|00:18.01) : 1022 1461 class=060000 0:104 0:000 PCI (00|00:18.02) : 1022 1462 class=060000 0:104 0:000 PCI (00|00:18.03) : 1022 1463 class=060000 0:104 0:000 PCI (00|00:18.04) : 1022 1464 class=060000 0:104 0:000 PCI (00|00:18.05) : 1022 1465 class=060000 0:104 0:000 PCI (00|00:18.06) : 1022 1466 class=060000 0:104 0:000 PCI (00|00:18.07) : 1022 1467 class=060000 0:104 0:000 === [ GetDefaultSettings ] ================================ 0:104 0:000 Clover load options size = 0 bytes 0:114 0:010 EFI\CLOVER\config.plist loaded: Success 0:114 0:000 === [ GetListOfThemes ] =================================== 0:116 0:001 - [00]: BGM 0:122 0:006 - [01]: embedded 0:128 0:005 - [01]: random 0:134 0:006 - [01]: Shield 0:142 0:007 === [ Found config plists ] =============================== 0:144 0:002 - config.plist 0:146 0:002 - config Kopie.plist 0:148 0:002 - config_pro61.plist 0:150 0:001 === [ GetEarlyUserSettings ] ============================== 0:150 0:000 timeout set to 3 0:150 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:150 0:000 KextsToPatch: 1 requested 0:150 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 26 in XHCI kext (100-series)) :: MatchOS: 10.12.x :: BinPatch :: data len: 7 0:150 0:000 Default theme: Shield 0:150 0:000 === [ LoadDrivers ] ======================================= 0:151 0:001 Loading AppleImageCodec-64.efi status=Success 0:163 0:011 Loading AppleKeyAggregator-64.efi status=Success 0:170 0:007 Loading AppleUITheme-64.efi status=Success 0:179 0:008 Loading CsmVideoDxe-64.efi status=Success 0:187 0:008 - driver needs connecting 0:187 0:000 Loading DataHubDxe-64.efi status=Success 0:196 0:008 Loading EmuVariableUefi-64.efi status=Success 0:203 0:007 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success 0:204 0:000 Loading Fat-64.efi status=Success 0:211 0:007 - driver needs connecting 0:211 0:000 Loading FirmwareVolume-64.efi status=Success 0:219 0:007 Loading FSInject-64.efi status=Success 0:227 0:007 Loading OsxAptioFixDrv-64.efi status=Success 0:234 0:007 Loading OsxFatBinaryDrv-64.efi status=Success 0:242 0:008 Loading PartitionDxe-64.efi status=Success 0:251 0:008 - driver needs connecting 0:251 0:000 Loading SMCHelper-64.efi status=Success 0:259 0:007 Loading VBoxHfs-64.efi status=Success 0:267 0:008 - driver needs connecting 0:268 0:001 4 drivers needs connecting ... 0:268 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 0:268 0:000 Partition driver loaded: 0:268 0:000 Video driver loaded: disconnect Success 0:345 0:077 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:483 0:138 CsmVideoDriverBindingStart 0:483 0:000 mixed support=40010 0:483 0:000 Controller is [030000] 0:483 0:000 Check for VBE 0:587 0:103 found Detail Timing 2560x1440 0:587 0:000 found Detail Timing 2560x1440 0:604 0:017 0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0 0:607 0:002 1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1 0:610 0:002 2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2 0:613 0:002 3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3 0:630 0:017 4 1600x1200 attr=3BF - ok, edid+, working, highest, pref=4 0:635 0:004 5 2560x1440 attr=3BF - ok, edid+, working, highest, pref=5 0:638 0:002 6 1280x800 attr=3BF - ok, edid- 0:638 0:000 CsmVideo: New mode: 5 2560x1440 - set 1:179 0:541 - SetMode pref 5 (5) = Success 1:179 0:000 CsmVideoCheckForVbe - Success 1:180 0:000 CsmVideoDriverBindingStart end Success 1:180 0:000 CsmVideo: New mode: 2 1024x768 - set 1:371 0:191 CsmVideo: New mode: 2 1024x768EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 1:718 0:346 === [ InitScreen ] ======================================== 1:718 0:000 SetScreenResolution: 1920x1080 - not found! 1:718 0:000 Console modes reported: 4, available modes: 1:718 0:000 - [01]: 80x25 1:718 0:000 - [02]: 80x50 1:718 0:000 - [03]: 100x31 1:718 0:000 - [04]: 128x40 (current mode) 1:718 0:000 SetScreenResolution: 1024x768 - already set 1:718 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,FF3EF174-38AA-44B7-A131-898CFDE5166D,0x28,0x64000) 1:722 0:004 Using embedded font: Success 1:722 0:000 === [ GetMacAddress ] ===================================== 1:722 0:000 MAC address of LAN #0= 4C:CC:6A:F9:80:C4: 1:722 0:000 === [ ScanSPD ] =========================================== 1:723 0:000 === [ GetAcpiTablesList ] ================================= 1:723 0:000 Get Acpi Tables List from RSDT: 1:723 0:000 - [00]: FACP A M I len=132 1:723 0:000 - [01]: APIC A M I len=222 1:723 0:000 - [02]: FPDT A M I len=68 1:723 0:000 - [03]: FIDT A M I len=156 1:723 0:000 - [04]: SSDT AMD ALIB len=35916 1:723 0:000 - [05]: SSDT AMD CPU len=8420 1:723 0:000 - [06]: CRAT AMD CRAT len=3920 1:723 0:000 - [07]: CDIT AMD CDIT len=41 1:723 0:000 - [08]: SSDT AMD AOD len=6098 1:723 0:000 - [09]: MCFG A M I len=60 1:723 0:000 - [10]: HPET A M I len=56 1:723 0:000 - [11]: SSDT FCHZP len=36 1:723 0:000 - [12]: UEFI len=66 1:723 0:000 - [13]: IVRS AMD IVRS len=48 1:723 0:000 - [14]: SSDT AMD PT len=248 1:723 0:000 - [15]: SSDT CPMCMN len=5732 1:723 0:000 Calibrated TSC Frequency = 3600565200 = 3600MHz 1:723 0:000 === [ GetUserSettings ] =================================== 1:723 0:000 USB FixOwnership: yes 1:723 0:000 - final DSDT Fix mask=00000000 1:723 0:000 PatchesDSDT: 5 requested 1:723 0:000 - [00]: (change XHC0 to XHC1) lenToFind: 4, lenToReplace: 4 1:723 0:000 - [01]: (PTXH to XHC1) lenToFind: 4, lenToReplace: 4 1:723 0:000 - [02]: (change _OSI to XOSI) lenToFind: 4, lenToReplace: 4 1:723 0:000 patch disabled at config 1:723 0:000 - [03]: (change XHCI to XHC) lenToFind: 4, lenToReplace: 4 1:723 0:000 patch disabled at config 1:723 0:000 - [04]: (change XHC1 to XHC) lenToFind: 4, lenToReplace: 4 1:723 0:000 patch disabled at config 1:723 0:000 ChassisType: 0x13 1:723 0:000 Converted CustomUUID 80F24F84-F3AB-4DC1-8949-223E4E951B48 1:730 0:006 === [ ScanVolumes ] ======================================= 1:730 0:000 Found 4 volumes with blockIO 1:730 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0) 1:730 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,FF3EF174-38AA-44B7-A131-898CFDE5166D,0x28,0x64000) 1:731 0:000 Result of bootcode detection: bootable unknown (legacy) 1:737 0:006 This is SelfVolume !! 1:737 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,6EF18343-A588-4547-A9CF-4E680C6BCD76,0x64028,0xDDFAC40) 1:737 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,B0DB51FF-00D2-4D9B-BD56-2BDE08496D02,0xDE5EC68,0x135F20) 1:746 0:008 Loading nvram.plist from Vol 'EFI' - loaded, size=2462 1:752 0:005 === [ PutNvramPlistToRtVars ] ============================= 1:752 0:000 Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 1:752 0:000 Skipping EmuVariableUefiPresent 1:752 0:000 Skipping OsxAptioFixDrv-RelocBase 1:752 0:000 Adding Key: SystemAudioVolume: Size = 1, Data: 30 1:752 0:000 Adding Key: SystemAudioVolumeDB: Size = 1, Data: F0 1:752 0:000 Adding Key: backlight-level: Size = 2, Data: FF FF 1:752 0:000 Adding Key: boot-gamma: Size = 170, Data: C3 15 00 00 82 23 00 00 05 E5 61 02 AA 00 00 00 00 00 00 00 0C 00 C0 00 F9 03 40 02 B5 08 41 07 16 14 43 0E 8C 20 C5 17 E1 2E 48 22 E4 3C CB 2E 0B 4C CF 3D C4 5C 53 4E DD 6D 1C 71 D7 8E 66 9A 65 B2 B2 C9 E9 D7 0C 00 C0 00 F9 03 40 02 B5 08 41 07 16 14 43 0E 8C 20 C5 17 E1 2E 48 22 E4 3C CB 2E 0B 4C CF 3D C4 5C 53 4E DD 6D 1C 71 D7 8E 66 9A 65 B2 B2 C9 E9 D7 0C 00 C0 00 F9 03 40 02 B5 08 41 07 16 14 43 0E 8C 20 C5 17 E1 2E 48 22 E4 3C CB 2E 0B 4C CF 3D C4 5C 53 4E DD 6D 1C 71 D7 8E 66 9A 65 B2 B2 C9 E9 D7 1:752 0:000 Adding Key: bootercfg: Size = 2, Data: 28 00 1:752 0:000 Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00 1:752 0:000 Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 12 1:752 0:000 Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 1:752 0:000 Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 1:752 0:000 Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 1:752 0:000 Adding Key: fakesmc-key-BBIN-ui8: Size = 1, Data: 01 1:752 0:000 Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 1:752 0:000 Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 1:752 0:000 Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 08 C0 F0 00 1:752 0:000 Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 1:752 0:000 Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 1:752 0:000 Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 1:752 0:000 Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 1:752 0:000 Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 1:752 0:000 Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 1:752 0:000 Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6A 39 35 6A 39 35 61 00 1:752 0:000 Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 02 33 0F 00 00 10 1:752 0:000 Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 1:752 0:000 Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6A 39 35 00 00 00 00 00 1:752 0:000 Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1:752 0:000 Adding Key: fmm-computer-name: Size = 4, Data: 69 4D 61 63 1:752 0:000 Adding Key: nvda_drv: Size = 2, Data: 31 00 1:752 0:000 Adding Key: platform-uuid: Size = 16, Data: 0A C5 83 2E 08 C0 44 59 95 92 2F 2B B8 56 EF 72 1:752 0:000 Adding Key: prev-lang:kbd: Size = 4, Data: 65 6E 3A 30 1:752 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none' 1:752 0:000 Adding Key: specialbootdevice: Size = 74, Data: 02 01 0C 00 D0 41 03 0A 00 00 00 00 01 01 06 00 00 17 03 12 0A 00 00 00 FF FF 00 00 04 01 2A 00 02 00 00 00 28 40 06 00 00 00 00 00 40 73 84 3B 00 00 00 00 C6 AC E6 D5 CC CD A4 49 AC 93 60 E1 F5 D6 60 36 02 02 7F FF 04 00 1:752 0:000 === [ InitTheme ] ========================================= 1:758 0:006 Using theme 'Shield' (EFI\CLOVER\themes\Shield) 1:759 0:000 OS main and drive as badge 1:766 0:007 Loading font from ThemeDir: Success 1:766 0:000 Choosing theme Shield 1:766 0:000 after NVRAM boot-args=npci=0x3000 kext-dev-mode=1 ncl=262144 1:766 0:000 === [ Dump SMC keys from NVRAM ] ========================== 1:766 0:000 found AppleSMC protocol 1:767 0:000 === [ ScanLoader ] ======================================== 1:767 0:000 - [01]: 'EFI' 1:884 0:117 - [02]: 'MacOS' 1:891 0:006 AddLoaderEntry for Volume Name=MacOS 1:898 0:007 Check if volume Is Hibernated: 1:898 0:000 Check sleep image 'by signature': 1:907 0:008 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success 1:907 0:000 using default sleep image name = \private\var\vm\sleepimage 1:914 0:007 sleepimage not found -> Not Found 1:914 0:000 hibernated: no - sign 2:000 0:085 - [03]: 'Recovery HD' 2:001 0:001 AddLoaderEntry for Volume Name=Recovery HD 2:002 0:000 Check if volume Is Hibernated: 2:002 0:000 Check sleep image 'by signature': 2:002 0:000 using default sleep image name = \private\var\vm\sleepimage 2:002 0:000 sleepimage not found -> Not Found 2:002 0:000 hibernated: no - sign 2:007 0:005 AddLoaderEntry for Volume Name=Recovery HD 2:093 0:085 Scanning legacy ... 2:093 0:000 === [ AddCustomTool ] ===================================== 2:099 0:006 found tool \EFI\CLOVER\tools\Shell64U.efi 2:099 0:000 Checking EFI partition Volume 1 for Clover 2:105 0:006 Found Clover 2:110 0:004 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 2:127 0:017 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 2:308 0:180 === [ GetEfiBootDeviceFromNvram ] ========================= 2:308 0:000 - found entry 0. 'Boot macOS from MacOS', Volume 'MacOS', DevicePath 'PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,6EF18343-A588-4547-A9CF-4E680C6BCD76,0x64028,0xDDFAC40)\System\Library\CoreServices\boot.efii' 2:308 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 2:308 0:000 DefaultIndex=0 and MainMenu.EntryCount=9 2:839 0:530 GUI ready 3:939 1:099 Boot option Boot0000 not found 3:939 0:000 === [ StartLoader ] ======================================= 3:939 0:000 Finally: ExternalClock=25MHz BusSpeed=100015kHz CPU=3601MHz PIS: hw.busfrequency=100000000Hz 3:939 0:000 Loading boot.efi status=Success 4:024 0:085 GetOSVersion: 10.12.5 (16F73) 4:024 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM 4:024 0:000 Filtering KextPatches: 4:024 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 26 in XHCI kext (100-series)) :: BinPatch :: [OS: 10.12.5 | MatchOS: 10.12.x | MatchBuild: All] ==> allowed 4:024 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 4:207 0:182 === [ PatchSmbios ] ======================================= 4:207 0:000 insert table 9 for dev 0:0 4:207 0:000 insert table 9 for dev 0:1 4:207 0:000 insert table 9 for dev 0:0 4:207 0:000 Trusting SMBIOS... 4:207 0:000 Detected alternating SMBIOS channel banks 4:207 0:000 Channels: 2 4:207 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 4:207 0:000 partNum=Unknown 4:207 0:000 SMBIOS Type 17 Index = 0 => 0 0: 4:207 0:000 BANK 0 DIMM0 EMPTY 4:207 0:000 partNum=CMK16GX4M2B3200C16 4:207 0:000 SMBIOS Type 17 Index = 1 => 1 2: 4:207 0:000 BANK 1 DIMM0 3066MHz 8192MB 4:207 0:000 partNum=Unknown 4:207 0:000 SMBIOS Type 17 Index = 2 => 2 1: 4:207 0:000 BANK 0 DIMM1 EMPTY 4:207 0:000 partNum=CMK16GX4M2B3200C16 4:207 0:000 SMBIOS Type 17 Index = 3 => 3 3: 4:207 0:000 BANK 1 DIMM1 3066MHz 8192MB 4:207 0:000 mTotalSystemMemory = 16384 4:207 0:000 NumberOfMemoryDevices = 4 4:207 0:000 Type20[0]->End = 0xFFFFFF, Type17[3] = 0x4000 4:207 0:000 === [ PatchACPI ] ========================================= 4:207 0:000 RSDT 0xDD347028 4:207 0:000 FADT from RSDT: 0xDD347148 4:207 0:000 XSDT 0xDD347090 4:207 0:000 FADT from XSDT: 0xDD34D0D8 4:207 0:000 Xsdt reallocation done 4:207 0:000 old FADT length=114 4:210 0:002 Apply DsdtFixMask=0x00000000 4:210 0:000 drop _DSM mask=0x0000 4:210 0:000 === [ FixBiosDsdt ] ======================================= 4:210 0:000 USBADR[0] = 0x10003 and PCIe = 0x0 4:210 0:000 USBADR[1] = 0x10003 and PCIe = 0x2 4:210 0:000 VideoCard devID=0x118710DE 4:210 0:000 DisplayADR1[0] = 0x30001, DisplayADR2[0] = 0x0 4:210 0:000 USBADR[2] = 0x70001 and PCIe = 0x3 4:263 0:052 Patching DSDT: 4:263 0:000 - [change XHC0 to XHC1]: pattern 58484330, patched at: [ (2752) (1601) (1E3A) ] 4:263 0:000 - [PTXH to XHC1]: pattern 50545848, patched at: [ (1E5E) (1ECD) ] 4:263 0:000 - [change _OSI to XOSI]: disabled 4:263 0:000 - [change XHCI to XHC]: disabled 4:263 0:000 - [change XHC1 to XHC]: disabled 4:263 0:000 first CPU found at 3F67 offset 3F6B 4:263 0:000 score candidate at 3E5A 4:263 0:000 score inserted in acpi_cpu_score _PR_ 4:263 0:000 Found ACPI CPU: P000 | P001 | P002 | P003 | P004 | P005 | P006 | P007 | P008 | P009 | P00A | P00B | P00C | P00D | P00E | P00F , within the score: _PR_ 4:263 0:000 Found PCIROOTUID = 0 4:263 0:000 === [ ACPIDropTables ] ==================================== 4:263 0:000 === [ PatchAllSSDT ] ====================================== 4:263 0:000 Patch table: SSDT AMD ALIB len=0x8C4C 4:263 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 4:263 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 4:263 0:000 2. [change _OSI to XOSI]: disabled 4:263 0:000 3. [change XHCI to XHC]: disabled 4:263 0:000 4. [change XHC1 to XHC]: disabled 4:263 0:000 Patch table: SSDT AMD CPU len=0x20E4 4:263 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 4:263 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 4:263 0:000 2. [change _OSI to XOSI]: disabled 4:263 0:000 3. [change XHCI to XHC]: disabled 4:263 0:000 4. [change XHC1 to XHC]: disabled 4:263 0:000 Patch table: SSDT AMD AOD len=0x17D2 4:263 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 4:263 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 4:263 0:000 2. [change _OSI to XOSI]: disabled 4:263 0:000 3. [change XHCI to XHC]: disabled 4:263 0:000 4. [change XHC1 to XHC]: disabled 4:263 0:000 Patch table: SSDT FCHZP len=0x24 4:263 0:000 0. [change XHC0 to XHC1]: pattern 58484330, the patch is too large! 4:263 0:000 1. [PTXH to XHC1]: pattern 50545848, the patch is too large! 4:263 0:000 2. [change _OSI to XOSI]: disabled 4:263 0:000 3. [change XHCI to XHC]: disabled 4:263 0:000 4. [change XHC1 to XHC]: disabled 4:263 0:000 Patch table: SSDT AMD PT len=0xF8 4:263 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 4:263 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 4:263 0:000 2. [change _OSI to XOSI]: disabled 4:263 0:000 3. [change XHCI to XHC]: disabled 4:263 0:000 4. [change XHC1 to XHC]: disabled 4:263 0:000 Patch table: SSDT CPMCMN len=0x1664 4:263 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 4:263 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 4:264 0:000 2. [change _OSI to XOSI]: disabled 4:264 0:000 3. [change XHCI to XHC]: disabled 4:264 0:000 4. [change XHC1 to XHC]: disabled 4:264 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0 4:264 0:000 Xsdt has tables count=16 4:264 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=16 4:264 0:000 === [ RestSetup macOS ] =================================== 4:264 0:000 EdidDiscovered size=128 4:264 0:000 ------- EDID Table 4:264 0:000 000 | 00 FF FF FF FF FF FF 00 15 C3 4:264 0:000 010 | 83 23 05 E5 61 02 14 17 01 03 4:264 0:000 020 | 80 3C 22 78 EA 27 95 A9 54 4F 4:264 0:000 030 | 9E 26 0A 50 54 A1 08 00 D1 00 4:264 0:000 040 | D1 C0 A9 40 81 80 81 40 81 C0 4:264 0:000 050 | 01 01 01 01 56 5E 00 A0 A0 A0 4:264 0:000 060 | 29 50 30 20 35 00 55 50 21 00 4:264 0:000 070 | 00 1A 21 39 00 00 A3 A0 1C 50 4:264 0:000 080 | 78 08 35 10 55 50 21 00 00 1C 4:264 0:000 090 | 00 00 00 FD 00 3B 3D 1F 59 19 4:264 0:000 100 | 00 0A 20 20 20 20 20 20 00 00 4:264 0:000 110 | 00 FC 00 45 56 32 37 33 36 57 4:264 0:000 120 | 0A 20 20 20 20 20 00 FB 4:264 0:000 mem_detected 1605220958208Mb 4:264 0:000 read_nVidia_ROM 4:264 0:000 Using PRAMIN fixups 4:468 0:203 PROM 4:747 0:279 ERROR: Unable to locate nVidia Video BIOS 4:747 0:000 there are no ROM loaded and no VBIOS read from hardware 4:747 0:000 nVidia MSI GeForce GTX 760 -1096810496MB NVE4 [10DE:1187] :: PciRoot(0x0)\Pci(0x3,0x1)\Pci(0x0,0x0) => device #1 4:747 0:000 Nvidia: VideoPorts: undefined, default to: 2 4:747 0:000 default NVCAP: 04000000-00000300-0C000000-00000007-00000000 4:747 0:000 RCBA disabled; cannot use it 4:747 0:000 stringlength = 3270 4:748 0:000 CurrentMode: Width=1024 Height=768 4:748 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DAF31798 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DAF31798 4:753 0:005 Use origin smbios table type 1 guid. 4:756 0:003 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 4:757 0:001 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext 4:769 0:012 Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext 4:783 0:013 Extra kext: EFI\CLOVER\kexts\Other\patched_10.12_AppleRTC.kext 4:794 0:011 Extra kext: EFI\CLOVER\kexts\Other\System.kext 4:802 0:007 Extra kext: EFI\CLOVER\kexts\Other\VoodooHDA.kext 4:817 0:015 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12 4:820 0:003 Custom boot is disabled Audio seems to be OK (VoodooHDA) Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2463425 Share on other sites More sharing options...
Bronya Posted July 15, 2017 Share Posted July 15, 2017 boot-args=npci=0x3000 kext-dev-mode=1 ncl=262144 busratio=36 Audio seems to be OK (VoodooHDA) Ok ! Tnx ! But i fixed clover and soon release ... 1 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2463430 Share on other sites More sharing options...
gills83 Posted July 15, 2017 Share Posted July 15, 2017 Hello all,To finish with this story of "busratio=xx", force to note that the parameters Clover are not able to fix correctly the core AMD CPU, this flag reserved to chameleon even under Clover has an influence.It mainly fixes the audio and certainly other bus, I no longer have audio stall with this flag.So Slice has twisted and Bronya reason for this flag even under clover I no longer have an audio stall with "busratio=35" which corresponds to the speed of the CPU (35x100)The Clover CPUFrequency flag in Mhz has no influence and only a cosmetic value that does not influence the kernel. cdt. I would also like to know if OpenGL graphics performance are worse on Sierra?I noticed a noticeable decline in performance, is it due to Sierra or the core?The owners of Intel CPU have noticed this drop or it is simply due to the system AMD or kernel?From Mavericks to El Capitan for an HD 7950, OpenGL cinebench ranges from 85 to 90 fps depending on the speed of the CPU, for Sierra, the HD 7950 captures at 75 fps regardless of CPU speed. I made this video capture Sreen Flow reduced but still at 60 fps, it is a 4k video 60 fps originally captured in 2 k with Sreen Flow 6, it is a good exercise to check the health of Your system is correct but there are a few lags, lags that I do not have with Mavericks doing the same exercise. thanks this vidéo: https://www.partage-fichiers.com/upload/d4mtc7eu Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2463451 Share on other sites More sharing options...
Sherlocks Posted July 16, 2017 Share Posted July 16, 2017 Clover log seems good step. But I think if you have audio issue, try use busfrequency 100,000 khz in config.plist. maybe tsc calibration makes problem on rygen. Similiar caae that intel skylake pentium, If i use tsc calibration, audio is disappear with distorted sound after some seconds. So i have to use 100,000khz to avoid audio issue Sorry my english 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2463529 Share on other sites More sharing options...
Bronya Posted July 16, 2017 Share Posted July 16, 2017 The new kernel dated on 2017-07-01 worked perfectly with EFI_4114 at 10.9.5. Only it seemed not fully compatible with VoodooHDA.kext which resulted in interrupted sound output if booted by Clover. No such a bug if booted by Bronya's 2667 boot file. Hi ! Problem sound with new kernel 10.9.5 from Clover ? Problem sound if use other my Clover , example ver 4101 ? 1 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2463559 Share on other sites More sharing options...
jsl Posted July 18, 2017 Share Posted July 18, 2017 Hi ! Problem sound with new kernel 10.9.5 from Clover ? Problem sound if use other my Clover , example ver 4101 ? Clover_4114 can boot 10.10.5 to desktop, but too fast timer and very poor performance & sound output were found. No such a bug for 10.9.5 with newest kernel dated on 2017-07-01. Clover_4101 can not boot 10.10.5 to desktop, but it worked at 10.9.5 with good sound output in my Ryzen 1700X hackintosh after removal of one kext in /S/L/E. Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2465254 Share on other sites More sharing options...
Bronya Posted July 20, 2017 Share Posted July 20, 2017 Hi ! Here 3 files ! Clover release 4101 , boot_chameleon, and kernel_maverick_10.9.5 ! Please try without flags "fsb=nn and busratio=nn" . If no works , use flag for test . And here results an pictures ! I will not make clover and kernel for new ver system , example 10.10.5 or 10.11 ... if you not will test ... boot_chameleon_ryzen_rc1.zip efi_clover_4101_fix_rc7.zip mach_kernel_10.9.5_21_July.zip 2 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2466566 Share on other sites More sharing options...
jsl Posted July 21, 2017 Share Posted July 21, 2017 Hi ! Here 3 files ! Clover release 4101 , boot_chameleon, and kernel_maverick_10.9.5 ! Please try without flags "fsb=nn and busratio=nn" . If no works , use flag for test . And here results an pictures ! I will not make clover and kernel for new ver system , example 10.10.5 or 10.11 ... if you not will test ... Thanks for this new files. Kernel_10.9.5 worked perfectly and no difference from previous kernel dated on 2017-07-01. Boot_Chameleon_Ryzen_rc1 can detect correct CPU parameters & boot to desktop at 10.9.5, 10.10.5, and 10.11.5 with matched Ryzen kernels in my Phenom II x6 1405T hackintosh, but got black screen and reboot at 10.11.6 or 10.10.5 with flags (fsb=200 busratio=15) without matched Ryzen's kernels. It also worked in Ryzen 1700X hackintosh at 10.9.5 to 10.12.6 without boot flags and its bug is unable to reboot which was fixed by previous Bronya 2892 version. The disadvantage of Bronya 2892 version is boot flags (fsb=100 busratio) is essential and without these flags always got black screen then reboot. Clover_4101_fix_rc7 can boot 10.9.5 & 10.12.6 correctly, but 10.10.5 still got too fast timer and very poor performance as previous version. Unable to boot 10.11.6 to desktop yet ! Hope these information may give you some good idea to fix these bug or disadvantage as soon as possible ! 2 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2466599 Share on other sites More sharing options...
riden666 Posted July 21, 2017 Share Posted July 21, 2017 10.12.5 boot-args=npci=0x3000 kext-dev-mode=1 ncl=262144 Sound is OK. hw.tbfrequency: 1000000000 hw.cpufrequency_max: 3601000000 hw.cpufrequency_min: 3601000000 hw.cpufrequency: 3601000000 hw.busfrequency_max: 400000000 hw.busfrequency_min: 400000000 hw.busfrequency: 400000000 machdep.tsc.frequency: 3600594361 0:100 0:100 MemLog inited, TSC freq: 3600594360 0:100 0:000 CPU was calibrated without ACPI PM Timer: Intel ICH device was not found., use RTC 0:100 0:000 0:100 0:000 Now is 21.7.2017, 13:30:39 (GMT) 0:100 0:000 Starting Clover revision: 4101 on American Megatrends EFI 0:100 0:000 Build with: [Args: -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 3 | OS: 10.9.5 | XCODE: 5.1.1] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x7,0x1)\Pci(0x0,0x3)\USB(0x4,0x0)\HD(1,GPT,6139E608-49A3-4CC6-9686-7521EA53E3DD,0x28,0x64000) @DAF59618 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 === [ Get Smbios ] ======================================== 0:100 0:000 Type 16 Index = 0 0:100 0:000 Total Memory Slots Count = 4 0:100 0:000 Type 17 Index = 0 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 3066MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = CHANNEL A DIMM 0 0:100 0:000 SmbiosTable.Type17->Vendor = Unknown 0:100 0:000 SmbiosTable.Type17->SerialNumber = Unknown 0:100 0:000 SmbiosTable.Type17->PartNumber = Unknown 0:100 0:000 Type 17 Index = 1 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/2, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 3066MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = CHANNEL A DIMM 1 0:100 0:000 SmbiosTable.Type17->Vendor = Unknown 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMK16GX4M2B3200C16 0:100 0:000 Type 17 Index = 2 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/3, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 3066MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = CHANNEL B DIMM 0 0:100 0:000 SmbiosTable.Type17->Vendor = Unknown 0:100 0:000 SmbiosTable.Type17->SerialNumber = Unknown 0:100 0:000 SmbiosTable.Type17->PartNumber = Unknown 0:100 0:000 Type 17 Index = 3 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/4, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 3066MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = CHANNEL B DIMM 1 0:100 0:000 SmbiosTable.Type17->Vendor = Unknown 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMK16GX4M2B3200C16 0:100 0:000 Boot status=0 0:100 0:000 Running on: 'MS-7A37' with board 'B350M MORTAR (MS-7A37)' 0:100 0:000 === [ GetCPUProperties ] ================================== 0:100 0:000 CPU Vendor = 68747541 Model=800F11 0:100 0:000 The CPU supported SSE4.1 0:100 0:000 Looking to disable C1E if is already enabled by the BIOS: 0:100 0:000 BrandString = AMD Ryzen 7 1800X Eight-Core Processor 0:100 0:000 CurrentSpeed: 3600 0:100 0:000 FSBFrequency = 10 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 0:100 0:000 MaxDiv/MinDiv: 36.0/22 0:100 0:000 Turbo: 0/0/0/0 0:100 0:000 Features: 0x178BFBFF 0:100 0:000 Threads: 16 0:100 0:000 Cores: 8 0:100 0:000 FSB: 25 MHz 0:100 0:000 CPU: 3600 MHz 0:100 0:000 TSC: 3600 MHz 0:100 0:000 PIS: 100 MHz 0:100 0:000 === [ GetDevices ] ======================================== 0:100 0:000 PCI (00|00:00.00) : 1022 1450 class=060000 0:100 0:000 PCI (00|00:01.00) : 1022 1452 class=060000 0:100 0:000 PCI (00|00:01.03) : 1022 1453 class=060400 0:100 0:000 PCI (00|03:00.00) : 1022 43BB class=0C0330 0:100 0:000 PCI (00|03:00.01) : 1022 43B7 class=010601 0:100 0:000 PCI (00|03:00.02) : 1022 43B2 class=060400 0:100 0:000 PCI (00|04:00.00) : 1022 43B4 class=060400 0:100 0:000 PCI (00|04:01.00) : 1022 43B4 class=060400 0:100 0:000 PCI (00|1E:00.00) : 10EC 8168 class=020000 0:100 0:000 - LAN: 0 Vendor=Realtek 0:100 0:000 PCI (00|04:04.00) : 1022 43B4 class=060400 0:100 0:000 PCI (00|1F:00.00) : 1B73 1100 class=0C0330 0:100 0:000 PCI (00|00:02.00) : 1022 1452 class=060000 0:100 0:000 PCI (00|00:03.00) : 1022 1452 class=060000 0:100 0:000 PCI (00|00:03.01) : 1022 1453 class=060400 0:100 0:000 PCI (00|20:00.00) : 1002 68B8 class=030000 0:100 0:000 - GFX: Model=ATI Radeon HD 5770 Series (ATI/AMD) 0:100 0:000 - RADEON_BIOS_0_SCRATCH = 0x00000004 0:100 0:000 PCI (00|20:00.01) : 1002 AA58 class=040300 0:100 0:000 - HDMI Audio: 0:100 0:000 PCI (00|00:04.00) : 1022 1452 class=060000 0:100 0:000 PCI (00|00:07.00) : 1022 1452 class=060000 0:100 0:000 PCI (00|00:07.01) : 1022 1454 class=060400 0:100 0:000 PCI (00|21:00.00) : 1022 145A class=130000 0:100 0:000 PCI (00|21:00.02) : 1022 1456 class=108000 0:100 0:000 PCI (00|21:00.03) : 1022 145C class=0C0330 0:100 0:000 PCI (00|00:08.00) : 1022 1452 class=060000 0:100 0:000 PCI (00|00:08.01) : 1022 1454 class=060400 0:100 0:000 PCI (00|22:00.00) : 1022 1455 class=130000 0:100 0:000 PCI (00|22:00.02) : 1022 7901 class=010601 0:100 0:000 PCI (00|22:00.03) : 1022 1457 class=040300 0:100 0:000 PCI (00|00:14.00) : 1022 790B class=0C0500 0:100 0:000 PCI (00|00:14.03) : 1022 790E class=060100 0:100 0:000 PCI (00|00:18.00) : 1022 1460 class=060000 0:100 0:000 PCI (00|00:18.01) : 1022 1461 class=060000 0:100 0:000 PCI (00|00:18.02) : 1022 1462 class=060000 0:100 0:000 PCI (00|00:18.03) : 1022 1463 class=060000 0:100 0:000 PCI (00|00:18.04) : 1022 1464 class=060000 0:100 0:000 PCI (00|00:18.05) : 1022 1465 class=060000 0:100 0:000 PCI (00|00:18.06) : 1022 1466 class=060000 0:100 0:000 PCI (00|00:18.07) : 1022 1467 class=060000 0:100 0:000 === [ GetDefaultSettings ] ================================ 0:100 0:000 Clover load options size = 0 bytes 0:106 0:006 EFI\CLOVER\config.plist loaded: Success 0:106 0:000 === [ GetListOfThemes ] =================================== 0:109 0:002 - [00]: BGM 0:113 0:004 - [01]: embedded 0:116 0:002 - [01]: random 0:120 0:004 - [01]: Shield 0:125 0:004 === [ Found config plists ] =============================== 0:125 0:000 - config.plist 0:125 0:000 - config Kopie.plist 0:125 0:000 - config_pro61.plist 0:126 0:000 === [ GetEarlyUserSettings ] ============================== 0:126 0:000 timeout set to 3 0:126 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:126 0:000 KextsToPatch: 1 requested 0:126 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 26 in XHCI kext (100-series)) :: MatchOS: 10.12.x :: BinPatch :: data len: 7 0:126 0:000 Default theme: Shield 0:126 0:000 === [ LoadDrivers ] ======================================= 0:128 0:002 Loading AppleImageCodec-64.efi status=Success 0:131 0:003 Loading AppleKeyAggregator-64.efi status=Success 0:133 0:001 Loading AppleUITheme-64.efi status=Success 0:135 0:002 Loading CsmVideoDxe-64.efi status=Success 0:138 0:003 - driver needs connecting 0:138 0:000 Loading DataHubDxe-64.efi status=Success 0:141 0:002 Loading EmuVariableUefi-64.efi status=Success 0:143 0:001 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success 0:143 0:000 Loading Fat-64.efi status=Success 0:146 0:003 - driver needs connecting 0:146 0:000 Loading FirmwareVolume-64.efi status=Success 0:147 0:001 Loading FSInject-64.efi status=Success 0:149 0:001 Loading OsxAptioFixDrv-64.efi status=Success 0:150 0:001 Loading OsxFatBinaryDrv-64.efi status=Success 0:154 0:004 Loading PartitionDxe-64.efi status=Success 0:157 0:002 - driver needs connecting 0:157 0:000 Loading SMCHelper-64.efi status=Success 0:159 0:002 Loading VBoxHfs-64.efi status=Success 0:161 0:002 - driver needs connecting 0:161 0:000 4 drivers needs connecting ... 0:161 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 0:161 0:000 Partition driver loaded: 0:161 0:000 Video driver loaded: disconnect Success 0:255 0:094 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:396 0:140 CsmVideoDriverBindingStart 0:396 0:000 mixed support=40010 0:396 0:000 Controller is [030000] 0:396 0:000 Check for VBE 0:429 0:033 found Detail Timing 2560x1440 0:429 0:000 found Detail Timing 2560x1440 0:437 0:007 0 1152x864 attr=BB - ok, edid- 0:437 0:000 1 1280x960 attr=BB - ok, edid+, working, highest, pref=1 0:438 0:000 2 640x480 attr=BB - ok, edid+, 640x480, working 0:438 0:000 3 800x600 attr=BB - ok, edid+, 800x600, working 0:438 0:000 4 1024x768 attr=BB - ok, edid+, 1024x768, working 0:438 0:000 5 1280x1024 attr=BB - ok, edid+, working, highest, pref=5 0:440 0:001 6 1400x1050 attr=BB - ok, edid- 0:441 0:001 7 1600x1200 attr=BB - ok, edid+, working, highest, pref=7 0:442 0:001 8 1792x1344 attr=BB - ok, edid- 0:444 0:001 9 1856x1392 attr=BB - ok, edid- 0:445 0:001 10 1920x1440 attr=BB - ok, edid- 0:445 0:000 CsmVideo: New mode: 7 1600x1200 - set 0:591 0:146 - SetMode pref 7 (7) = Success 0:591 0:000 CsmVideoCheckForVbe - Success 0:592 0:000 CsmVideoDriverBindingStart end Success 0:592 0:000 CsmVideo: New mode: 4 1024x768 - set 0:787 0:195 CsmVideo: New mode: 6 1400x1050 - set 1:155 0:368 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 1:342 0:187 === [ InitScreen ] ======================================== 1:342 0:000 SetScreenResolution: 1920x1080 - not found! 1:342 0:000 Console modes reported: 4, available modes: 1:342 0:000 - [01]: 80x25 (current mode) 1:342 0:000 - [02]: 80x50 1:342 0:000 - [03]: 100x31 1:342 0:000 - [04]: 128x40 1:342 0:000 SetScreenResolution: 1400x1050 - already set 1:342 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x7,0x1)\Pci(0x0,0x3)\USB(0x4,0x0)\HD(1,GPT,6139E608-49A3-4CC6-9686-7521EA53E3DD,0x28,0x64000) 1:343 0:000 Using embedded font: Success 1:343 0:000 === [ GetMacAddress ] ===================================== 1:343 0:000 MAC address of LAN #0= 4C:CC:6A:F9:80:C4: 1:343 0:000 === [ ScanSPD ] =========================================== 1:344 0:000 === [ GetAcpiTablesList ] ================================= 1:344 0:000 Get Acpi Tables List from RSDT: 1:344 0:000 - [00]: FACP A M I len=132 1:344 0:000 - [01]: APIC A M I len=222 1:344 0:000 - [02]: FPDT A M I len=68 1:344 0:000 - [03]: FIDT A M I len=156 1:344 0:000 - [04]: SSDT AMD ALIB len=35916 1:344 0:000 - [05]: SSDT AMD CPU len=8420 1:344 0:000 - [06]: CRAT AMD CRAT len=3920 1:344 0:000 - [07]: CDIT AMD CDIT len=41 1:344 0:000 - [08]: SSDT AMD AOD len=6098 1:344 0:000 - [09]: MCFG A M I len=60 1:344 0:000 - [10]: HPET A M I len=56 1:344 0:000 - [11]: SSDT FCHZP len=36 1:344 0:000 - [12]: UEFI len=66 1:344 0:000 - [13]: IVRS AMD IVRS len=48 1:344 0:000 - [14]: SSDT AMD PT len=248 1:344 0:000 - [15]: SSDT CPMCMN len=5732 1:344 0:000 Calibrated TSC frequency =3600594360 =3600MHz 1:344 0:000 === [ GetUserSettings ] =================================== 1:344 0:000 USB FixOwnership: yes 1:344 0:000 - final DSDT Fix mask=00000000 1:344 0:000 PatchesDSDT: 2 requested 1:344 0:000 - [00]: (change XHC0 to XHC1) lenToFind: 4, lenToReplace: 4 1:344 0:000 - [01]: (PTXH to XHC1) lenToFind: 4, lenToReplace: 4 1:344 0:000 EnableC7: yes 1:344 0:000 EnableC6: yes 1:344 0:000 EnableC4: yes 1:344 0:000 EnableC2: yes 1:344 0:000 ChassisType: 0x13 1:344 0:000 Converted CustomUUID 80F24F84-F3AB-4DC1-8949-223E4E951B48 1:350 0:005 === [ ScanVolumes ] ======================================= 1:350 0:000 Found 7 volumes with blockIO 1:350 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x7,0x1)\Pci(0x0,0x3)\USB(0x4,0x0) 1:352 0:002 USB volume 1:352 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x7,0x1)\Pci(0x0,0x3)\USB(0x4,0x0)\HD(1,GPT,6139E608-49A3-4CC6-9686-7521EA53E3DD,0x28,0x64000) 1:353 0:001 Result of bootcode detection: bootable unknown (legacy) 1:353 0:000 USB volume 1:360 0:007 This is SelfVolume !! 1:360 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x7,0x1)\Pci(0x0,0x3)\USB(0x4,0x0)\HD(2,GPT,AB7241AE-7833-4D4C-8E9F-B3C8553A8D0B,0x64028,0x730BFB0) 1:362 0:001 USB volume 1:362 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0) 1:364 0:001 - [04]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,FF3EF174-38AA-44B7-A131-898CFDE5166D,0x28,0x64000) 1:364 0:000 Result of bootcode detection: bootable unknown (legacy) 1:370 0:005 - [05]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,6EF18343-A588-4547-A9CF-4E680C6BCD76,0x64028,0xDDFAC40) 1:371 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,B0DB51FF-00D2-4D9B-BD56-2BDE08496D02,0xDE5EC68,0x135F20) 1:385 0:014 Loading nvram.plist from Vol 'EFI' - loaded, size=2462 1:388 0:003 === [ PutNvramPlistToRtVars ] ============================= 1:388 0:000 Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 1:388 0:000 Skipping EmuVariableUefiPresent 1:388 0:000 Skipping OsxAptioFixDrv-RelocBase 1:388 0:000 Adding Key: SystemAudioVolume: Size = 1, Data: 30 1:388 0:000 Adding Key: SystemAudioVolumeDB: Size = 1, Data: F0 1:388 0:000 Adding Key: backlight-level: Size = 2, Data: FF FF 1:388 0:000 Adding Key: boot-gamma: Size = 170, Data: C3 15 00 00 82 23 00 00 05 E5 61 02 AA 00 00 00 00 00 00 00 0C 00 C0 00 F9 03 40 02 B5 08 41 07 16 14 43 0E 8C 20 C5 17 E1 2E 48 22 E4 3C CB 2E 0B 4C CF 3D C4 5C 53 4E DD 6D 1C 71 D7 8E 66 9A 65 B2 B2 C9 E9 D7 0C 00 C0 00 F9 03 40 02 B5 08 41 07 16 14 43 0E 8C 20 C5 17 E1 2E 48 22 E4 3C CB 2E 0B 4C CF 3D C4 5C 53 4E DD 6D 1C 71 D7 8E 66 9A 65 B2 B2 C9 E9 D7 0C 00 C0 00 F9 03 40 02 B5 08 41 07 16 14 43 0E 8C 20 C5 17 E1 2E 48 22 E4 3C CB 2E 0B 4C CF 3D C4 5C 53 4E DD 6D 1C 71 D7 8E 66 9A 65 B2 B2 C9 E9 D7 1:388 0:000 Adding Key: bootercfg: Size = 2, Data: 28 00 1:388 0:000 Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00 1:388 0:000 Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 12 1:388 0:000 Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 1:388 0:000 Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 1:388 0:000 Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 1:388 0:000 Adding Key: fakesmc-key-BBIN-ui8: Size = 1, Data: 01 1:388 0:000 Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 1:388 0:000 Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 1:388 0:000 Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 08 C0 F0 00 1:388 0:000 Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 1:388 0:000 Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 1:388 0:000 Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 1:388 0:000 Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 1:388 0:000 Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 1:388 0:000 Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 1:388 0:000 Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6A 39 35 6A 39 35 61 00 1:388 0:000 Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 02 33 0F 00 00 10 1:388 0:000 Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 1:388 0:000 Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6A 39 35 00 00 00 00 00 1:388 0:000 Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1:388 0:000 Adding Key: fmm-computer-name: Size = 4, Data: 69 4D 61 63 1:388 0:000 Adding Key: nvda_drv: Size = 2, Data: 31 00 1:388 0:000 Adding Key: platform-uuid: Size = 16, Data: 0A C5 83 2E 08 C0 44 59 95 92 2F 2B B8 56 EF 72 1:388 0:000 Adding Key: prev-lang:kbd: Size = 4, Data: 65 6E 3A 30 1:388 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none' 1:388 0:000 Adding Key: specialbootdevice: Size = 74, Data: 02 01 0C 00 D0 41 03 0A 00 00 00 00 01 01 06 00 00 17 03 12 0A 00 00 00 FF FF 00 00 04 01 2A 00 02 00 00 00 28 40 06 00 00 00 00 00 40 73 84 3B 00 00 00 00 C6 AC E6 D5 CC CD A4 49 AC 93 60 E1 F5 D6 60 36 02 02 7F FF 04 00 1:388 0:000 === [ InitTheme ] ========================================= 1:390 0:001 Using theme 'Shield' (EFI\CLOVER\themes\Shield) 1:390 0:000 OS main and drive as badge 1:396 0:006 Loading font from ThemeDir: Success 1:396 0:000 Choosing theme Shield 1:396 0:000 after NVRAM boot-args=npci=0x3000 kext-dev-mode=1 ncl=262144 1:396 0:000 === [ Dump SMC keys from NVRAM ] ========================== 1:396 0:000 found AppleSMC protocol 1:397 0:000 === [ ScanLoader ] ======================================== 1:397 0:000 - [01]: 'EFI' 1:423 0:026 - [02]: 'OhneTitel' 1:428 0:004 - [04]: 'EFI' 1:473 0:044 - [05]: 'MacOS' 1:479 0:006 AddLoaderEntry for Volume Name=MacOS 1:487 0:007 Check if volume Is Hibernated: 1:487 0:000 Check sleep image 'by signature': 1:496 0:008 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success 1:496 0:000 using default sleep image name = \private\var\vm\sleepimage 1:503 0:007 sleepimage not found -> Not Found 1:503 0:000 hibernated: no - sign 1:511 0:007 - [06]: 'Recovery HD' 1:513 0:001 AddLoaderEntry for Volume Name=Recovery HD 1:513 0:000 Check if volume Is Hibernated: 1:513 0:000 Check sleep image 'by signature': 1:513 0:000 using default sleep image name = \private\var\vm\sleepimage 1:513 0:000 sleepimage not found -> Not Found 1:513 0:000 hibernated: no - sign 1:515 0:001 AddLoaderEntry for Volume Name=Recovery HD 1:521 0:006 Scanning legacy ... 1:521 0:000 === [ AddCustomTool ] ===================================== 1:521 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 1:521 0:000 Checking EFI partition Volume 1 for Clover 1:521 0:000 Found Clover 1:524 0:002 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 1:524 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 1:713 0:188 === [ GetEfiBootDeviceFromNvram ] ========================= 1:713 0:000 - found entry 0. 'Boot macOS from MacOS', Volume 'MacOS', DevicePath 'PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,6EF18343-A588-4547-A9CF-4E680C6BCD76,0x64028,0xDDFAC40)\System\Library\CoreServices\boot.efii' 1:713 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 1:713 0:000 DefaultIndex=0 and MainMenu.EntryCount=9 1:925 0:212 GUI ready 24:306 22:380 Boot option Boot0000 not found 24:306 0:000 === [ StartLoader ] ======================================= 24:306 0:000 Finally: Bus=100016kHz CPU=3601MHz 24:306 0:000 Loading boot.efi status=Success 24:397 0:091 GetOSVersion: 10.12.5 (16F73) 24:397 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM 24:397 0:000 Filtering KextPatches: 24:397 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 26 in XHCI kext (100-series)) :: BinPatch :: [OS: 10.12.5 | MatchOS: 10.12.x | MatchBuild: All] ==> allowed 24:397 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 24:586 0:188 === [ PatchSmbios ] ======================================= 24:586 0:000 insert table 9 for dev 0:0 24:586 0:000 insert table 9 for dev 0:1 24:586 0:000 insert table 9 for dev 0:0 24:587 0:000 Trusting SMBIOS... 24:587 0:000 Detected alternating SMBIOS channel banks 24:587 0:000 Channels: 2 24:587 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 24:587 0:000 partNum=Unknown 24:587 0:000 SMBIOS Type 17 Index = 0 => 0 0: 24:587 0:000 BANK 0 DIMM0 EMPTY 24:587 0:000 partNum=CMK16GX4M2B3200C16 24:587 0:000 SMBIOS Type 17 Index = 1 => 1 2: 24:587 0:000 BANK 1 DIMM0 3066MHz 8192MB 24:587 0:000 partNum=Unknown 24:587 0:000 SMBIOS Type 17 Index = 2 => 2 1: 24:587 0:000 BANK 0 DIMM1 EMPTY 24:587 0:000 partNum=CMK16GX4M2B3200C16 24:587 0:000 SMBIOS Type 17 Index = 3 => 3 3: 24:587 0:000 BANK 1 DIMM1 3066MHz 8192MB 24:587 0:000 mTotalSystemMemory = 16384 24:587 0:000 NumberOfMemoryDevices = 4 24:587 0:000 Type20[0]->End = 0xFFFFFF, Type17[3] = 0x4000 24:587 0:000 === [ PatchACPI ] ========================================= 24:587 0:000 RSDT 0xDD347028 24:587 0:000 FADT from RSDT: 0xDD347148 24:587 0:000 XSDT 0xDD347090 24:587 0:000 FADT from XSDT: 0xDD34D0D8 24:587 0:000 Xsdt reallocation done 24:587 0:000 old FADT length=114 24:587 0:000 Apply DsdtFixMask=0x00000000 24:587 0:000 drop _DSM mask=0x0000 24:587 0:000 === [ FixBiosDsdt ] ======================================= 24:587 0:000 USBADR[0] = 0x10003 and PCIe = 0x0 24:587 0:000 USBADR[1] = 0x10003 and PCIe = 0x2 24:587 0:000 VideoCard devID=0x68B81002 24:587 0:000 DisplayADR1[0] = 0x30001, DisplayADR2[0] = 0x0 24:588 0:000 USBADR[2] = 0x70001 and PCIe = 0x3 24:634 0:046 Patching DSDT: 24:634 0:000 - [change XHC0 to XHC1]: pattern 58484330, patched at: [ (2752) (1601) (1E3A) ] 24:634 0:000 - [PTXH to XHC1]: pattern 50545848, patched at: [ (1E5E) (1ECD) ] 24:634 0:000 first CPU found at 3F67 offset 3F6B 24:634 0:000 score candidate at 3E5A 24:634 0:000 score inserted in acpi_cpu_score _PR_ 24:634 0:000 Found ACPI CPU: P000 | P001 | P002 | P003 | P004 | P005 | P006 | P007 | P008 | P009 | P00A | P00B | P00C | P00D | P00E | P00F , within the score: _PR_ 24:634 0:000 Found PCIROOTUID = 0 24:634 0:000 === [ ACPIDropTables ] ==================================== 24:634 0:000 === [ PatchAllSSDT ] ====================================== 24:634 0:000 Patch table: SSDT AMD ALIB len=0x8C4C 24:634 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 24:634 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 24:634 0:000 Patch table: SSDT AMD CPU len=0x20E4 24:634 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 24:634 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 24:634 0:000 Patch table: SSDT AMD AOD len=0x17D2 24:634 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 24:635 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 24:635 0:000 Patch table: SSDT FCHZP len=0x24 24:635 0:000 0. [change XHC0 to XHC1]: pattern 58484330, the patch is too large! 24:635 0:000 1. [PTXH to XHC1]: pattern 50545848, the patch is too large! 24:635 0:000 Patch table: SSDT AMD PT len=0xF8 24:635 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 24:635 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 24:635 0:000 Patch table: SSDT CPMCMN len=0x1664 24:635 0:000 0. [change XHC0 to XHC1]: pattern 58484330, bin not found / already patched! 24:635 0:000 1. [PTXH to XHC1]: pattern 50545848, bin not found / already patched! 24:635 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0 24:635 0:000 Xsdt has tables count=16 24:635 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=16 24:635 0:000 SSDT with CPU C-States generated successfully 24:635 0:000 === [ RestSetup macOS ] =================================== 24:635 0:000 EdidDiscovered size=128 24:635 0:000 ------- EDID Table 24:635 0:000 000 | 00 FF FF FF FF FF FF 00 15 C3 24:635 0:000 010 | 83 23 05 E5 61 02 14 17 01 03 24:635 0:000 020 | 80 3C 22 78 EA 27 95 A9 54 4F 24:635 0:000 030 | 9E 26 0A 50 54 A1 08 00 D1 00 24:635 0:000 040 | D1 C0 A9 40 81 80 81 40 81 C0 24:635 0:000 050 | 01 01 01 01 56 5E 00 A0 A0 A0 24:635 0:000 060 | 29 50 30 20 35 00 55 50 21 00 24:635 0:000 070 | 00 1A 21 39 00 00 A3 A0 1C 50 24:635 0:000 080 | 78 08 35 10 55 50 21 00 00 1C 24:635 0:000 090 | 00 00 00 FD 00 3B 3D 1F 59 19 24:635 0:000 100 | 00 0A 20 20 20 20 20 20 00 00 24:635 0:000 110 | 00 FC 00 45 56 32 37 33 36 57 24:635 0:000 120 | 0A 20 20 20 20 20 00 FB 24:635 0:000 ATI injection not set 24:635 0:000 RCBA disabled; cannot use it 24:635 0:000 stringlength = 1740 24:635 0:000 CurrentMode: Width=1400 Height=1050 24:635 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D86D7018 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D86D7018 24:638 0:003 Use origin smbios table type 1 guid. 24:640 0:001 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 24:640 0:000 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext 24:647 0:007 Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext 24:664 0:017 Extra kext: EFI\CLOVER\kexts\Other\GenericUSBXHCI.kext 24:675 0:010 Extra kext: EFI\CLOVER\kexts\Other\patched_10.12_AppleRTC.kext 24:684 0:009 Extra kext: EFI\CLOVER\kexts\Other\System.kext 24:687 0:002 Extra kext: EFI\CLOVER\kexts\Other\VoodooHDA.kext 24:699 0:011 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12 24:702 0:002 Custom boot is disabled 1 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2466842 Share on other sites More sharing options...
Gigamaxx Posted July 21, 2017 Share Posted July 21, 2017 Hi ! Here 3 files ! Clover release 4101 , boot_chameleon, and kernel_maverick_10.9.5 ! Please try without flags "fsb=nn and busratio=nn" . If no works , use flag for test . And here results an pictures ! I will not make clover and kernel for new ver system , example 10.10.5 or 10.11 ... if you not will test ... Hi Bronya, this clover is for Sierra test too? Or is it for Mavericks, Yosemite, El Cap test? 1 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2466889 Share on other sites More sharing options...
Bronya Posted July 21, 2017 Share Posted July 21, 2017 Hi Bronya, this clover is for Sierra test too? Or is it for Mavericks, Yosemite, El Cap test? Hi ! You can test all or one any )) 1 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2466997 Share on other sites More sharing options...
Nameless One Posted July 23, 2017 Share Posted July 23, 2017 What flag are you referring to for testing when things don't work? Currently when I use the above cloverx64.efi to boot 10.12.5 I need to use -v in order to reach the desktop, without it the system just hangs part way through. Also I need to include busratio=37 or else the clock and all animations run way too fast and also Sierra will not load the Nvidia drivers at all (I don't use nvda_drv=1 but my previous cloverx64.efi didn't need it). I have forgotten which kernel version I am using, it has been a few weeks since I got my system installed and working but rc4 sounds familliar, is there anything within the files installed with the kernel to indicate which version it is? Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2467672 Share on other sites More sharing options...
Bronya Posted July 24, 2017 Share Posted July 24, 2017 kernel for maverick - is ok ! Then , try kernel for 10.10.5 ! kernel_ryzen_10.10.5_24_July.zip 1 Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2468629 Share on other sites More sharing options...
jsl Posted July 25, 2017 Share Posted July 25, 2017 Thanks for this new 10.10.5 kernel which works with normal timer & Cinebench R15 performance by Bronya 2892 boot or Bronya 4101 Clover EFI ! Comparison to 10.9.5 kernel in Ryzen 1700X hackintosh there is significant slower to shutdown at 10.10.5. Not sure it's due to kernel or Mac OS X version. Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2468743 Share on other sites More sharing options...
victorqueiroz Posted August 12, 2017 Share Posted August 12, 2017 (edited) Thanks for this new files. Kernel_10.9.5 worked perfectly and no difference from previous kernel dated on 2017-07-01. Boot_Chameleon_Ryzen_rc1 can detect correct CPU parameters & boot to desktop at 10.9.5, 10.10.5, and 10.11.5 with matched Ryzen kernels in my Phenom II x6 1405T hackintosh, but got black screen and reboot at 10.11.6 or 10.10.5 with flags (fsb=200 busratio=15) without matched Ryzen's kernels. It also worked in Ryzen 1700X hackintosh at 10.9.5 to 10.12.6 without boot flags and its bug is unable to reboot which was fixed by previous Bronya 2892 version. The disadvantage of Bronya 2892 version is boot flags (fsb=100 busratio) is essential and without these flags always got black screen then reboot. Clover_4101_fix_rc7 can boot 10.9.5 & 10.12.6 correctly, but 10.10.5 still got too fast timer and very poor performance as previous version. Unable to boot 10.11.6 to desktop yet ! Hope these information may give you some good idea to fix these bug or disadvantage as soon as possible ! How is the compatibility of this kernel to 10.8.4? I have a Ryzen 7 1700 and a ASUS B350 Prime + GTX 1050 ti but when I try to load installer through patched Chameleon I get stucked at the "Still waiting for root device" already tried PCIRootUID=1 and 0, also my USB is connected to a 2.0 port, on my mother board settings I already updated to AHCI and I try to change USB ports, nothing works, I don't know what to do anymore. That error was trying to install 10.9.1 dmg. EDIT: I was able to create a new USB now with createinstallmedia and Clover EFI + clover patches of 10.9.5 but when I try to boot with 'npci=0x2000 -v kernel=mach_kernel' it just reboot after "++++++++". I already tried with literally all the flags described here in this topic but nothing works. Can somebody help me? I can't run macOS on my PC? Help me, please. Edited August 13, 2017 by victorqueiroz Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2478286 Share on other sites More sharing options...
jsl Posted August 19, 2017 Share Posted August 19, 2017 How is the compatibility of this kernel to 10.8.4? I have a Ryzen 7 1700 and a ASUS B350 Prime + GTX 1050 ti but when I try to load installer through patched Chameleon I get stucked at the "Still waiting for root device" already tried PCIRootUID=1 and 0, also my USB is connected to a 2.0 port, on my mother board settings I already updated to AHCI and I try to change USB ports, nothing works, I don't know what to do anymore. That error was trying to install 10.9.1 dmg. EDIT: I was able to create a new USB now with createinstallmedia and Clover EFI + clover patches of 10.9.5 but when I try to boot with 'npci=0x2000 -v kernel=mach_kernel' it just reboot after "++++++++". I already tried with literally all the flags described here in this topic but nothing works. Can somebody help me? I can't run macOS on my PC? Help me, please. Post#125 http://www.insanelym...t-thread/page-7 Only 10.9.5 to 10.12.x were compatible with Bronya's kernels for each different versions. Link to comment https://www.insanelymac.com/forum/topic/324831-release-open-source-clover-fork-with-ryzen-support/page/9/#findComment-2481808 Share on other sites More sharing options...
Recommended Posts