Cyberdevs Posted August 19, 2017 Share Posted August 19, 2017 I have not made any copies, but I just tried not, Just run the time machine from system preferences and use it to create a newer backup of your system and see if it works. How ever the "Restore" button is grayed out which means the backup can not be restored within the macOS but if you boot your system with the recovery partition or with a USB disk you can restore the data with a certain backup. Link to comment Share on other sites More sharing options...
luky35 Posted August 19, 2017 Author Share Posted August 19, 2017 He does not want to run Time Machine to make a copy, but I only get that picture above and nothing else. Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 19, 2017 Share Posted August 19, 2017 Is the hard disk that you set as the time machine backup disk connected right now? Link to comment Share on other sites More sharing options...
luky35 Posted August 19, 2017 Author Share Posted August 19, 2017 Made it OK. Disconnected the external disk, reset the PC, the drive was back up and now Time Machine makes a copy. Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 19, 2017 Share Posted August 19, 2017 Nice Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 @cyberdevs hi, At the beginning of the clean installation of the High Sierra DP7, I get an error (image). Please help. Thank you http://shrani.si/f/3D/af/1cjkggrn/error.png Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 @cyberdevs hi, At the beginning of the clean installation of the High Sierra DP7, I get an error (image). Please help. Thank you http://shrani.si/f/3D/af/1cjkggrn/error.png Hi there, You need to use the latest version of the clover configurator to update your SMBIOS info and use the latest clover r4182. Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 I installed and used the clover v4182 on USB. I attach EFI folder. EFI.zip Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 try with this config config.plist.zip Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 try with this config It's not, I get the same mistake. Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 do you have any other OS's on your HDD/SSD? can you perform a full erase of the HDD/SSD? as I remember correctly you installed windows on your PC right? Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 I do not have the windows I put on USB and now I had a clean DP6 installation. Today, I made a USB with DP7, a clover of chris1111 v4182, but I got the error that I sent you picture. Currently working with High Sierra from external SSD. Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 I do not have the windows I put on USB and now I had a clean DP6 installation. Today, I made a USB with DP7, a clover of chris1111 v4182, but I got the error that I sent you picture. Currently working with High Sierra from external SSD. can you send the bootlog from your clover? Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 can you send the bootlog from your clover? Where can I find it? I have a clover install-log here Clover_Install_Log.txt.zip Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 No when you are in clover boot menu press F2 key and it will save the freeboot.log in the /EFI/Clover/misc and send that log. Or boot into macOS on your external SSD using your bootable USB disk and from there use clover configurator to create the boot.log and post that as well Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 USB preboot_log. preboot.log.zip External_preboot.log.zip Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 You're bootlog appears normal the only thing that I can think of is to remove the EmuVaraiableUEFI.efi and nvram.plist from your EFI folder, however EmuVaraiableUEFI.efi doesn't cause the OSInstall.mpkg error anymore but what the heck, give it a try Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 You're bootlog appears normal the only thing that I can think of is to remove the EmuVaraiableUEFI.efi and nvram.plist from your EFI folder, however EmuVaraiableUEFI.efi doesn't cause the OSInstall.mpkg error anymore but what the heck, give it a try After removing EmuVaraiableUEFI.efi and nvram.plist from the EFI folder, the installation of the High Sierra DP7 is made without error. Thank you very much. Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 After removing EmuVaraiableUEFI.efi and nvram.plist from the EFI folder, the installation of the High Sierra DP7 is made without error. Thank you very much. Awesome Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 I reinstalled the Sierro DP7 EmuVaraiableUEFI.efi from Clover r4182 and worked OK. I do not have a Nvram.plist because I deleted it before installing it from USB. I am wondering if the system still works like a must ?Thank you. Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 I reinstalled the Sierro DP7 EmuVaraiableUEFI.efi from Clover r4182 and worked OK. I do not have a Nvram.plist because I deleted it before installing it from USB. I am wondering if the system still works like a must ? Thank you. I don't think you'll ever need to use EmuVaraiableUEFI.efi at all. Your hack will perform completely ok without it. I don't use it on my test rig and I don't have a problem, Link to comment Share on other sites More sharing options...
luky35 Posted August 22, 2017 Author Share Posted August 22, 2017 @cyberdevs hi, Thank you for all the help you give us that our PC hachintosh can work with the macOS system. 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 22, 2017 Share Posted August 22, 2017 @cyberdevs hi, Thank you for all the help you give us that our PC hachintosh can work with the macOS system. It's my pleasure Link to comment Share on other sites More sharing options...
luky35 Posted August 23, 2017 Author Share Posted August 23, 2017 @cyberdevs hi, Please check my new config.plist.I've redefined Intel HD 530 graphics in config.plist and it works nicely.I removed unneeded add-ons and added new ones.I ask for your opinion, if that's okay.Greetings, config.plist.zip Link to comment Share on other sites More sharing options...
Cyberdevs Posted August 23, 2017 Share Posted August 23, 2017 @luky35 It's nice and clean config.plist You can remove kext-dev-mode flag you don't need it Link to comment Share on other sites More sharing options...
Recommended Posts