luky35 Posted June 27, 2017 Author Share Posted June 27, 2017 Replace config.plist but the error is the same. I attach pictures. http://shrani.si/f/2x/13n/5WQtIZV/1/foto1.png http://shrani.si/f/3Q/hq/1ZraiM7H/foto2.png Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 Same problem usb ... As told by cyberdevs, you should try a usb2 ... Or you can create a small partition on your ssd, and use it for installer... 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 27, 2017 Share Posted June 27, 2017 @gengik84 With the new patches I still can't use USB 3.0 ports to load the installer either It only works on USB 2.0 port. 1 Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 @gengik84 With the new patches I still can't use USB 3.0 ports to load the installer either It only works on USB 2.0 port. Most likely, usbinjectall.kext needs updating for 10.13 Edit: Rehabman released a new version... Try, replace...USBInjectAll.kext.zip new version is 0.6.1... Now you using 0.6... Try and cross finger.... 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 27, 2017 Share Posted June 27, 2017 Most likely, usbinjectall.kext needs updating for 10.13 Edit: Rehabman released a new version... Try, replace...USBInjectAll.kext.zip Oh, that's awesome! Thanks man! I'll give it a try in a minute and get back to you ASAP! Update: Nope! Still it's no go! 1 Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 Update: Nope! Still it's no go! ... Rehabman will definitely help, only to wait .... For now, you should create the installer on disk... We will avoid problems with usb ... Or try to use pen drive 2.0 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 27, 2017 Share Posted June 27, 2017 It's weird, I have two PCs with the same case (CoolerMaster Silencio 452), in one of them I have a GA-Z170X-Gaming 5 and in the other one I have an Asus P8H77-M LE and on both cases I have USB header port connected to both USB 2.0 and USB 3.0 ports on the mainboard, and the funny part is that on GA-Z170X USB 3.0 ports on the header don't work but on the Asus they do! I know that they have two different chipset series but still that's kind of funny. 1 Link to comment Share on other sites More sharing options...
luky35 Posted June 27, 2017 Author Share Posted June 27, 2017 Changing the kext-USB, replacing all the ports on the computer, replacing config.plist, but failing. I will do one small partition on the SSD and try to install it from there. 1 Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 It's weird, I have two PCs with the same case (CoolerMaster Silencio 452), in one of them I have a GA-Z170X-Gaming 5 and in the other one I have an Asus P8H77-M LE and on both cases I have USB header port connected to both USB 2.0 and USB 3.0 ports on the mainboard, and the funny part is that on GA-Z170X USB 3.0 ports on the header don't work but on the Asus they do! I know that they have two different chipset series but still that's kind of funny. You might have different controllers .. On gigabyte you have Asmedia ? Link to comment Share on other sites More sharing options...
luky35 Posted June 27, 2017 Author Share Posted June 27, 2017 How to install now on this partition? Thank you. http://shrani.si/f/3N/Wo/FGb2hbt/install.png Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 wrong command /Volumes/Install\ DP2 not /Volume/install DP2 1 Link to comment Share on other sites More sharing options...
luky35 Posted June 27, 2017 Author Share Posted June 27, 2017 wrong command /Volumes/Install\ DP2 not /Volume/install DP2 Thanks. 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 27, 2017 Share Posted June 27, 2017 You might have different controllers .. On gigabyte you have Asmedia ? No I have Intel on USB 3.1 and Chipset+GENESYS LOGIC USB 2.0 Hub. Link to comment Share on other sites More sharing options...
luky35 Posted June 27, 2017 Author Share Posted June 27, 2017 What am I doing wrong? http://shrani.si/f/2z/h2/249rMW4E/mount.png Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 Try it... use drag & drop on terminal Sorry but I have problem with upload on forum..I don't know the reason... Link to comment Share on other sites More sharing options...
luky35 Posted June 27, 2017 Author Share Posted June 27, 2017 @gengik84 Thank you very much. The installation goes to where it shows the picture then it stops and it does not go on. http://shrani.si/f/45/IC/2OaFgrhb/install.png 1 Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 I explain to you: Your partition = Install DP2 In your case Create install media for DP1 sudo /Applications/Install\ MacOS\ 10.13\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/Install\ DP2 --applicationpath /Applications/Install\ MacOS\ 10.13\ Beta.app --nointeraction Create install media for DP2 sudo /Applications/Install\ macOS\ High\ Sierra\ Beta.app/Contents/Resources/createinstallmedia /Volumes/Install\ DP2 /Applications/Install\ macOS\ High\ Sierra\ Beta.app --nointeraction You can see that the name has been changed by Apple... To solve this kind of problem, use what I did and attach for you ... It is based on Create install media, so it works from 10.9 to 10.13 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 27, 2017 Share Posted June 27, 2017 Ok, I finally managed to boot from USB 3.0 port on USB 3.0 header ports I edited the SSDT-UIAC.aml removed all the extra USB entries, removed all the SSD files from ACPI except for DSDT.aml and SSDT-UAIC.aml, removed the MatchOS (10.13.x) entry from the "Kernel and Kext Patches" replaced the USBInjectAll.kext with the v.0.6.1 and now it's working Thanks @gengik84 @Luky35 Follow the instructions on how to create the custom SSDT-UIAC.aml from the link I posted earlier and you'll be able to boot from USB 3.0 ports as well. The good thing about the custom SSDT-UIAC.aml is that if you create it once you can use it forever 1 Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 cyberdevs. 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 27, 2017 Share Posted June 27, 2017 @gengik84 Is there any way to increase the quota for positive votes? 1 Link to comment Share on other sites More sharing options...
gengik84 Posted June 27, 2017 Share Posted June 27, 2017 This is a good question ... But I can't answer... Link to comment Share on other sites More sharing options...
luky35 Posted June 27, 2017 Author Share Posted June 27, 2017 @cyberdevs Where do I find this? Please help because I can not do this myself! "custom SSDT-UAIC.aml" Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 27, 2017 Share Posted June 27, 2017 This is a good question ... But I can't answer... @cyberdevs Where do I find this? Please help because I can not do this myself! "custom SSDT-UAIC.aml" Of course you can just follow these instructions and be patient in the process; there's a also a link in my signature [macOS Sierra Guide] that you can download the PDF version with pictures. It might look complicated at first but it's really super easy to do. Custom SSDT-UIAC: A quick rundown on how to create a custom SSDT-UIAC. Add the following patch to your config.plist if you don’t already have the patch. Kext: AppleUSBXHCIPCI Find: 837D8C10 Replace: 837D8C1b Comment: Raise change 15 port limit to 26 in XHCI kext (100-series) MatchOS: 10.13.x The USBInjectAll.kext provided in this guide needs to be and stay installed. Download ioregistryexplorer Version 3.0.3 from http://mac.softpedia...yExplorer.shtml or download IOJones which is an alternative to IORegistryExplorer at: https://sourceforge.net/projects/iojones/ Download MaciASL from https://bitbucket.or...L-2017-0117.zip and extract, drag MaciASL.app into /Applications. (Credit RehabMan) Download OS-X-USB-Inject-All Master from: (Credit RehabMan) https://github.com/R...hive/master.zip and extract the zip file. Inside the OS-X-USB-Inject-All-master folder you will find SSDT-UIAC-ALL.dsl, copy it to your desktop. Open ioregistryexplorer and find your device id by typing XHC in the search field. Open SSDT-UIAC-ALL.dsl with MaciASL and find your appropriate device id section. Remove all other sections in the SSDT-UIAC-ALL.dsl that do not correspond with your device id leaving just the one section. Skylake does not have a EHCI controller so “HUB1”, ”HUB2”, ”EH01”, "EH02" can be removed and in my case I can also remove "8086_1e31", "8086_8xxx", "8086_9xxx", "8086_9cb1", "8086_9d2f" and "8086_a2af". Compile the file to make sure there are no errors in the code and then save the file with “ACPI Machine Language Binary”. Now we turn our attention to ioregistryexplorer, while you have ioregistry open go to the XHC section and take note of the HSxx or SSxx locations that have devices attached. Now plug in a USB 2.0 device into all USB 2.0 you NEED and do the same with USB 3.0 ports with USB 2 and 3 devices and take note of them all. Returning back to the SSDT-UIAC-ALL.dsl you will see all ports listed, you need to remove the ones you did not take note of and you can also add a comment to the ones you keep. UsbConnector values = USB 2.0 = 0, USB 3.0 = 3. Internal = 255 USB 2.0 devices plugged into USB 3.0 ports HSxx are still marked as USB 3.0 = 3. Internal devices such as Bluetooth etc are marked as 255 Once you gone through and done this to all the devices you need and removed the ones you don’t you can save your SSDT-UIAC-ALL.dsl in MaciASL. Make sure you rename it to SSDT-UIAC and that the file format is ACPI Machine Language Binary Copy and paste the resulting SSDT-UIAC.aml into your EFI/EFI/CLOVER/ACPI/patched folder. Disable the port limit patch in config.plist and add SSDT-UIAC.aml into SortedOrder if needed. Reboot. Open ioregistryexplorer and test the ports you left enabled USB 2 & 3. The number of ports you should see in ioreg should be significantly reduced as they are not being injected anymore. This is a good question ... But I can't answer... Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
luky35 Posted June 27, 2017 Author Share Posted June 27, 2017 Unfortunately, there will be nothing, because I can not do this. I will stay on Sierra on 10.12.5 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 27, 2017 Share Posted June 27, 2017 Unfortunately, there will be nothing, because I can not do this. I will stay on Sierra on 10.12.5 Why not? What happened? Link to comment Share on other sites More sharing options...
Recommended Posts